Commit ff0ff780 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: lantiq: use export.h in favour of module.h
  MAINTAINERS: The MIPS git tree has moved.
  MIPS: Fix build error due to missing inclusion of <linux/export.h>.
  MIPS: ASID conflict after CPU hotplug
  MIPS: Octeon: Fix compile error in arch/mips/cavium-octeon/flash_setup.c
  MIPS: errloongson2_clock: Fix build error by including linux/module.h
  STAGING: octeon-ethernet: Fix compile error caused by skb_frag_struct change
  MIPS: Hook up process_vm_readv and process_vm_writev system calls.
  MIPS: Kernel hangs occasionally during boot.
  MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD
  MIPS: BCM47xx: fix build with GENERIC_GPIO configuration
  MIPS: NXP: Remove unused source files.
  MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check
parents b1914cb2 4af92e7a
......@@ -4339,7 +4339,7 @@ MIPS
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
W: http://www.linux-mips.org/
T: git git://git.linux-mips.org/pub/scm/linux.git
T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
Q: http://patchwork.linux-mips.org/project/linux-mips/list/
S: Supported
F: Documentation/mips/
......
......@@ -17,8 +17,6 @@
static struct map_info flash_map;
static struct mtd_info *mymtd;
static int nr_parts;
static struct mtd_partition *parts;
static const char *part_probe_types[] = {
"cmdlinepart",
#ifdef CONFIG_MTD_REDBOOT_PARTS
......@@ -61,11 +59,8 @@ static int __init flash_init(void)
mymtd = do_map_probe("cfi_probe", &flash_map);
if (mymtd) {
mymtd->owner = THIS_MODULE;
nr_parts = parse_mtd_partitions(mymtd,
part_probe_types,
&parts, 0);
mtd_device_register(mymtd, parts, nr_parts);
mtd_device_parse_register(mymtd, part_probe_types,
0, NULL, 0);
} else {
pr_err("Failed to register MTD device for flash\n");
}
......
......@@ -207,8 +207,9 @@ void octeon_prepare_cpus(unsigned int max_cpus)
* the other bits alone.
*/
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
"SMP-IPI", mailbox_interrupt)) {
if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt,
IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI",
mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
}
}
......
......@@ -50,7 +50,7 @@ void __init prom_init(void)
/* arg[0] is "g", the rest is boot parameters */
for (i = 1; i < argc; i++) {
if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
if (strlen(arcs_cmdline) + strlen(arg[i]) + 1
>= sizeof(arcs_cmdline))
break;
strcat(arcs_cmdline, arg[i]);
......
......@@ -36,6 +36,8 @@ static inline int gpio_get_value(unsigned gpio)
return -EINVAL;
}
#define gpio_get_value_cansleep gpio_get_value
static inline void gpio_set_value(unsigned gpio, int value)
{
switch (bcm47xx_bus_type) {
......@@ -54,6 +56,19 @@ static inline void gpio_set_value(unsigned gpio, int value)
}
}
#define gpio_set_value_cansleep gpio_set_value
static inline int gpio_cansleep(unsigned gpio)
{
return 0;
}
static inline int gpio_is_valid(unsigned gpio)
{
return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
}
static inline int gpio_direction_input(unsigned gpio)
{
switch (bcm47xx_bus_type) {
......@@ -137,7 +152,4 @@ static inline int gpio_polarity(unsigned gpio, int value)
}
/* cansleep wrappers */
#include <asm-generic/gpio.h>
#endif /* __BCM47XX_GPIO_H */
......@@ -365,16 +365,18 @@
#define __NR_syncfs (__NR_Linux + 342)
#define __NR_sendmmsg (__NR_Linux + 343)
#define __NR_setns (__NR_Linux + 344)
#define __NR_process_vm_readv (__NR_Linux + 345)
#define __NR_process_vm_writev (__NR_Linux + 346)
/*
* Offset of the last Linux o32 flavoured syscall
*/
#define __NR_Linux_syscalls 344
#define __NR_Linux_syscalls 346
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
#define __NR_O32_Linux_syscalls 344
#define __NR_O32_Linux_syscalls 346
#if _MIPS_SIM == _MIPS_SIM_ABI64
......@@ -686,16 +688,18 @@
#define __NR_syncfs (__NR_Linux + 301)
#define __NR_sendmmsg (__NR_Linux + 302)
#define __NR_setns (__NR_Linux + 303)
#define __NR_process_vm_readv (__NR_Linux + 304)
#define __NR_process_vm_writev (__NR_Linux + 305)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
#define __NR_Linux_syscalls 303
#define __NR_Linux_syscalls 305
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
#define __NR_64_Linux_syscalls 303
#define __NR_64_Linux_syscalls 305
#if _MIPS_SIM == _MIPS_SIM_NABI32
......@@ -1012,16 +1016,18 @@
#define __NR_syncfs (__NR_Linux + 306)
#define __NR_sendmmsg (__NR_Linux + 307)
#define __NR_setns (__NR_Linux + 308)
#define __NR_process_vm_readv (__NR_Linux + 309)
#define __NR_process_vm_writev (__NR_Linux + 310)
/*
* Offset of the last N32 flavoured syscall
*/
#define __NR_Linux_syscalls 308
#define __NR_Linux_syscalls 310
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
#define __NR_N32_Linux_syscalls 308
#define __NR_N32_Linux_syscalls 310
#ifdef __KERNEL__
......
......@@ -103,19 +103,10 @@ static int c0_compare_int_pending(void)
/*
* Compare interrupt can be routed and latched outside the core,
* so a single execution hazard barrier may not be enough to give
* it time to clear as seen in the Cause register. 4 time the
* pipeline depth seems reasonably conservative, and empirically
* works better in configurations with high CPU/bus clock ratios.
* so wait up to worst case number of cycle counter ticks for timer interrupt
* changes to propagate to the cause register.
*/
#define compare_change_hazard() \
do { \
irq_disable_hazard(); \
irq_disable_hazard(); \
irq_disable_hazard(); \
irq_disable_hazard(); \
} while (0)
#define COMPARE_INT_SEEN_TICKS 50
int c0_compare_int_usable(void)
{
......@@ -126,8 +117,12 @@ int c0_compare_int_usable(void)
* IP7 already pending? Try to clear it by acking the timer.
*/
if (c0_compare_int_pending()) {
write_c0_compare(read_c0_count());
compare_change_hazard();
cnt = read_c0_count();
write_c0_compare(cnt);
back_to_back_c0_hazard();
while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
if (!c0_compare_int_pending())
break;
if (c0_compare_int_pending())
return 0;
}
......@@ -136,7 +131,7 @@ int c0_compare_int_usable(void)
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
compare_change_hazard();
back_to_back_c0_hazard();
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
......@@ -145,12 +140,17 @@ int c0_compare_int_usable(void)
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
compare_change_hazard();
while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
if (c0_compare_int_pending())
break;
if (!c0_compare_int_pending())
return 0;
write_c0_compare(read_c0_count());
compare_change_hazard();
cnt = read_c0_count();
write_c0_compare(cnt);
back_to_back_c0_hazard();
while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
if (!c0_compare_int_pending())
break;
if (c0_compare_int_pending())
return 0;
......
......@@ -7,6 +7,7 @@
* for more details.
*/
#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/platform_device.h>
......
......@@ -591,6 +591,8 @@ einval: li v0, -ENOSYS
sys sys_syncfs 1
sys sys_sendmmsg 4
sys sys_setns 2
sys sys_process_vm_readv 6 /* 4345 */
sys sys_process_vm_writev 6
.endm
/* We pre-compute the number of _instruction_ bytes needed to
......
......@@ -430,4 +430,6 @@ sys_call_table:
PTR sys_syncfs
PTR sys_sendmmsg
PTR sys_setns
PTR sys_process_vm_readv
PTR sys_process_vm_writev /* 5305 */
.size sys_call_table,.-sys_call_table
......@@ -430,4 +430,6 @@ EXPORT(sysn32_call_table)
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
PTR compat_sys_process_vm_readv
PTR compat_sys_process_vm_writev /* 6310 */
.size sysn32_call_table,.-sysn32_call_table
......@@ -548,4 +548,6 @@ sys_call_table:
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
PTR compat_sys_process_vm_readv /* 4345 */
PTR compat_sys_process_vm_writev
.size sys_call_table,.-sys_call_table
......@@ -1596,7 +1596,8 @@ void __cpuinit per_cpu_trap_init(void)
}
#endif /* CONFIG_MIPS_MT_SMTC */
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
if (!cpu_data[cpu].asid_cache)
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
......
......@@ -7,7 +7,7 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
......
......@@ -7,7 +7,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
......
......@@ -6,7 +6,7 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/module.h>
#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
......
......@@ -7,7 +7,7 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <asm/bootinfo.h>
......
......@@ -7,7 +7,7 @@
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>
......
......@@ -7,7 +7,7 @@
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>
......
......@@ -7,7 +7,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mtd/physmap.h>
......
......@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/export.h>
#include <lantiq_soc.h>
#include <xway_dma.h>
......
......@@ -7,7 +7,7 @@
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/ioport.h>
......
......@@ -7,7 +7,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
......
......@@ -9,7 +9,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
......
......@@ -6,7 +6,7 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/module.h>
#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
......
......@@ -6,7 +6,7 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/module.h>
#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
......
......@@ -10,7 +10,7 @@
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/pm.h>
#include <linux/module.h>
#include <linux/export.h>
#include <asm/reboot.h>
#include <lantiq_soc.h>
......
/*
*
* BRIEF MODULE DESCRIPTION
*
* Author: source@mvista.com
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <pci.h>
#include <glb.h>
#include <nand.h>
static struct resource pci_io_resource = {
.start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */
.end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
.name = "pci IO space",
.flags = IORESOURCE_IO
};
static struct resource pci_mem_resource = {
.start = PNX8550_PCIMEM,
.end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
.name = "pci memory space",
.flags = IORESOURCE_MEM
};
extern struct pci_ops pnx8550_pci_ops;
static struct pci_controller pnx8550_controller = {
.pci_ops = &pnx8550_pci_ops,
.io_map_base = PNX8550_PORT_BASE,
.io_resource = &pci_io_resource,
.mem_resource = &pci_mem_resource,
};
/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
static inline unsigned long get_system_mem_size(void)
{
/* Read IP2031_RANK0_ADDR_LO */
unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
/* Read IP2031_RANK1_ADDR_HI */
unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
return dram_r1_hi - dram_r0_lo + 1;
}
static int __init pnx8550_pci_setup(void)
{
int pci_mem_code;
int mem_size = get_system_mem_size() >> 20;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
-> 0:DACs are enabled and are working normally
1:DACs are powerdown
Bit 0:Enable of PCI inta output
-> 0 = Disable PCI inta output
1 = Enable PCI inta output
*/
PNX8550_GLB2_ENAB_INTA_O = 0;
/* Calc the PCI mem size code */
if (mem_size >= 128)
pci_mem_code = SIZE_128M;
else if (mem_size >= 64)
pci_mem_code = SIZE_64M;
else if (mem_size >= 32)
pci_mem_code = SIZE_32M;
else
pci_mem_code = SIZE_16M;
/* Set PCI_XIO registers */
outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
/* Send memory transaction via PCI_BASE2 */
outl(0x00000001, PCI_BASE | PCI_IO);
/* Unlock the setup register */
outl(0xca, PCI_BASE | PCI_UNLOCKREG);
/*
* BAR0 of PNX8550 (pci base 10) must be zero in order for ide
* to work, and in order for bus_to_baddr to work without any
* hacks.
*/
outl(0x00000000, PCI_BASE | PCI_BASE10);
/*
*These two bars are set by default or the boot code.
* However, it's safer to set them here so we're not boot
* code dependent.
*/
outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */
outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */
outl(PCI_EN_TA |
PCI_EN_PCI2MMI |
PCI_EN_XIO |
PCI_SETUP_BASE18_SIZE(SIZE_32M) |
PCI_SETUP_BASE18_EN |
PCI_SETUP_BASE14_EN |
PCI_SETUP_BASE10_PREF |
PCI_SETUP_BASE10_SIZE(pci_mem_code) |
PCI_SETUP_CFGMANAGE_EN |
PCI_SETUP_PCIARB_EN,
PCI_BASE |
PCI_SETUP); /* PCI_SETUP */
outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */
register_pci_controller(&pnx8550_controller);
return 0;
}
arch_initcall(pnx8550_pci_setup);
/*
*
* 2.6 port, Embedded Alley Solutions, Inc
*
* Based on Per Hallsmark, per.hallsmark@mvista.com
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/serial_pnx8xxx.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/time.h>
#include <glb.h>
#include <int.h>
#include <pci.h>
#include <uart.h>
#include <nand.h>
extern void __init board_setup(void);
extern void pnx8550_machine_restart(char *);
extern void pnx8550_machine_halt(void);
extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
extern char *prom_getcmdline(void);
struct resource standard_io_resources[] = {
{
.start = 0x00,
.end = 0x1f,
.name = "dma1",
.flags = IORESOURCE_BUSY
}, {
.start = 0x40,
.end = 0x5f,
.name = "timer",
.flags = IORESOURCE_BUSY
}, {
.start = 0x80,
.end = 0x8f,
.name = "dma page reg",
.flags = IORESOURCE_BUSY
}, {
.start = 0xc0,
.end = 0xdf,
.name = "dma2",
.flags = IORESOURCE_BUSY
},
};
#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
extern struct resource pci_io_resource;
extern struct resource pci_mem_resource;
/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
unsigned long get_system_mem_size(void)
{
/* Read IP2031_RANK0_ADDR_LO */
unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
/* Read IP2031_RANK1_ADDR_HI */
unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
return dram_r1_hi - dram_r0_lo + 1;
}
int pnx8550_console_port = -1;
void __init plat_mem_setup(void)
{
int i;
char* argptr;
board_setup(); /* board specific setup */
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
pm_power_off = pnx8550_machine_power_off;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
-> 0:DACs are enabled and are working normally
1:DACs are powerdown
Bit 0:Enable of PCI inta output
-> 0 = Disable PCI inta output
1 = Enable PCI inta output
*/
PNX8550_GLB2_ENAB_INTA_O = 0;
/* IO/MEM resources. */
set_io_port_base(PNX8550_PORT_BASE);
ioport_resource.start = 0;
ioport_resource.end = ~0;
iomem_resource.start = 0;
iomem_resource.end = ~0;
/* Request I/O space for devices on this board */
for (i = 0; i < STANDARD_IO_RESOURCES; i++)
request_resource(&ioport_resource, standard_io_resources + i);
/* Place the Mode Control bit for GPIO pin 16 in primary function */
/* Pin 16 is used by UART1, UA1_TX */
outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
PNX8550_GPIO_MC1);
argptr = prom_getcmdline();
if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
argptr += strlen("console=ttyS");
pnx8550_console_port = *argptr == '0' ? 0 : 1;
/* We must initialize the UART (console) before early printk */
/* Set LCR to 8-bit and BAUD to 38400 (no 5) */
ip3106_lcr(UART_BASE, pnx8550_console_port) =
PNX8XXX_UART_LCR_8BIT;
ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
}
}
......@@ -7,6 +7,7 @@
* Support for all devices (greater than 16) added by David Gathright.
*/
#include <linux/export.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
......
......@@ -13,6 +13,7 @@
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <asm/pci.h>
......
......@@ -102,7 +102,7 @@ void __init prom_init(void)
/* Get the boot parameters */
for (i = 1; i < argc; i++) {
if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >=
if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >=
sizeof(arcs_cmdline))
break;
......
......@@ -275,7 +275,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset));
hw_buffer.s.size = fs->size;
CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment