Commit ff10fca5 authored by Dominik Brodowski's avatar Dominik Brodowski

pcmcia: IOCARD is also required for using IRQs

Dave Hinds pointed out to me that 37979e15 will break b43 and
ray_cs, as IOCARD is not -- as the name would suggest -- only needed
for cards using IO ports. Instead, as it re-deines several pins, it
is also required for using interrupts.
Signed-off-by: default avatarDominik Brodowski <linux@dominikbrodowski.net>
parent d4429f60
......@@ -514,7 +514,9 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev)
}
/* Pick memory or I/O card, DMA mode, interrupt */
if (p_dev->_io)
if (p_dev->_io || flags & CONF_ENABLE_IRQ)
flags |= CONF_ENABLE_IOCARD;
if (flags & CONF_ENABLE_IOCARD)
s->socket.flags |= SS_IOCARD;
if (flags & CONF_ENABLE_SPKR) {
s->socket.flags |= SS_SPKR_ENA;
......
......@@ -259,6 +259,8 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev);
#define CONF_ENABLE_SPKR 0x0002
#define CONF_ENABLE_PULSE_IRQ 0x0004
#define CONF_ENABLE_ESR 0x0008
#define CONF_ENABLE_IOCARD 0x0010 /* auto-enabled if IO resources or IRQ
* (CONF_ENABLE_IRQ) in use */
/* flags used by pcmcia_loop_config() autoconfiguration */
#define CONF_AUTO_CHECK_VCC 0x0100 /* check for matching Vcc? */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment