clk: bcm2835: De-assert/assert PLL reset signal when appropriate

commit 75387237 upstream.

In order to enable a PLL, not only the PLL has to be powered up and
locked, but you also have to de-assert the reset signal. The last part
was missing. Add it so PLLs that were not enabled by the FW/bootloader
can be enabled from Linux.

Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/clk/bcm/clk-bcm2835.c

@@ -632,9 +632,7 @@ static void bcm2835_pll_off(struct clk_hw *hw)
 	const struct bcm2835_pll_data *data = pll->data;
 
 	spin_lock(&cprman->regs_lock);
-	cprman_write(cprman, data->cm_ctrl_reg,
-		     cprman_read(cprman, data->cm_ctrl_reg) |
-		     CM_PLL_ANARST);
+	cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
 	cprman_write(cprman, data->a2w_ctrl_reg,
 		     cprman_read(cprman, data->a2w_ctrl_reg) |
 		     A2W_PLL_CTRL_PWRDN);
@@ -670,6 +668,10 @@ static int bcm2835_pll_on(struct clk_hw *hw)
 		cpu_relax();
 	}
 
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) |
+		     A2W_PLL_CTRL_PRST_DISABLE);
+
 	return 0;
 }