Commit ff1b1bf8 authored by Sritej Velaga's avatar Sritej Velaga Committed by David S. Miller

qlcnic: change all P3 references to P3P

This patch just rename all P3 #define to P3P.
Signed-off-by: default avatarSritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: default avatarAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ee07c1a7
......@@ -94,12 +94,12 @@
#define FIRST_PAGE_GROUP_START 0
#define FIRST_PAGE_GROUP_END 0x100000
#define P3_MAX_MTU (9600)
#define P3_MIN_MTU (68)
#define P3P_MAX_MTU (9600)
#define P3P_MIN_MTU (68)
#define QLCNIC_MAX_ETHERHDR 32 /* This contains some padding */
#define QLCNIC_P3_RX_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + ETH_DATA_LEN)
#define QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + P3_MAX_MTU)
#define QLCNIC_P3P_RX_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + ETH_DATA_LEN)
#define QLCNIC_P3P_RX_JUMBO_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + P3P_MAX_MTU)
#define QLCNIC_CT_DEFAULT_RX_BUF_LEN 2048
#define QLCNIC_LRO_BUFFER_EXTRA 2048
......@@ -307,20 +307,20 @@ struct uni_data_desc{
/* Magic number to let user know flash is programmed */
#define QLCNIC_BDINFO_MAGIC 0x12345678
#define QLCNIC_BRDTYPE_P3_REF_QG 0x0021
#define QLCNIC_BRDTYPE_P3_HMEZ 0x0022
#define QLCNIC_BRDTYPE_P3_10G_CX4_LP 0x0023
#define QLCNIC_BRDTYPE_P3_4_GB 0x0024
#define QLCNIC_BRDTYPE_P3_IMEZ 0x0025
#define QLCNIC_BRDTYPE_P3_10G_SFP_PLUS 0x0026
#define QLCNIC_BRDTYPE_P3_10000_BASE_T 0x0027
#define QLCNIC_BRDTYPE_P3_XG_LOM 0x0028
#define QLCNIC_BRDTYPE_P3_4_GB_MM 0x0029
#define QLCNIC_BRDTYPE_P3_10G_SFP_CT 0x002a
#define QLCNIC_BRDTYPE_P3_10G_SFP_QT 0x002b
#define QLCNIC_BRDTYPE_P3_10G_CX4 0x0031
#define QLCNIC_BRDTYPE_P3_10G_XFP 0x0032
#define QLCNIC_BRDTYPE_P3_10G_TP 0x0080
#define QLCNIC_BRDTYPE_P3P_REF_QG 0x0021
#define QLCNIC_BRDTYPE_P3P_HMEZ 0x0022
#define QLCNIC_BRDTYPE_P3P_10G_CX4_LP 0x0023
#define QLCNIC_BRDTYPE_P3P_4_GB 0x0024
#define QLCNIC_BRDTYPE_P3P_IMEZ 0x0025
#define QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS 0x0026
#define QLCNIC_BRDTYPE_P3P_10000_BASE_T 0x0027
#define QLCNIC_BRDTYPE_P3P_XG_LOM 0x0028
#define QLCNIC_BRDTYPE_P3P_4_GB_MM 0x0029
#define QLCNIC_BRDTYPE_P3P_10G_SFP_CT 0x002a
#define QLCNIC_BRDTYPE_P3P_10G_SFP_QT 0x002b
#define QLCNIC_BRDTYPE_P3P_10G_CX4 0x0031
#define QLCNIC_BRDTYPE_P3P_10G_XFP 0x0032
#define QLCNIC_BRDTYPE_P3P_10G_TP 0x0080
#define QLCNIC_MSIX_TABLE_OFFSET 0x44
......@@ -719,7 +719,7 @@ struct qlcnic_cardrsp_tx_ctx {
/* MAC */
#define MC_COUNT_P3 38
#define MC_COUNT_P3P 38
#define QLCNIC_MAC_NOOP 0
#define QLCNIC_MAC_ADD 1
......
......@@ -96,7 +96,7 @@ static const char qlcnic_gstrings_test[][ETH_GSTRING_LEN] = {
static const u32 diag_registers[] = {
CRB_CMDPEG_STATE,
CRB_RCVPEG_STATE,
CRB_XG_STATE_P3,
CRB_XG_STATE_P3P,
CRB_FW_CAPABILITIES_1,
ISR_INT_STATE_REG,
QLCNIC_CRB_DRV_ACTIVE,
......@@ -189,9 +189,9 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
goto skip;
}
val = QLCRD32(adapter, P3_LINK_SPEED_REG(pcifn));
ecmd->speed = P3_LINK_SPEED_MHZ *
P3_LINK_SPEED_VAL(pcifn, val);
val = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn));
ecmd->speed = P3P_LINK_SPEED_MHZ *
P3P_LINK_SPEED_VAL(pcifn, val);
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
} else
......@@ -202,42 +202,42 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
ecmd->transceiver = XCVR_EXTERNAL;
switch (adapter->ahw.board_type) {
case QLCNIC_BRDTYPE_P3_REF_QG:
case QLCNIC_BRDTYPE_P3_4_GB:
case QLCNIC_BRDTYPE_P3_4_GB_MM:
case QLCNIC_BRDTYPE_P3P_REF_QG:
case QLCNIC_BRDTYPE_P3P_4_GB:
case QLCNIC_BRDTYPE_P3P_4_GB_MM:
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= ADVERTISED_Autoneg;
case QLCNIC_BRDTYPE_P3_10G_CX4:
case QLCNIC_BRDTYPE_P3_10G_CX4_LP:
case QLCNIC_BRDTYPE_P3_10000_BASE_T:
case QLCNIC_BRDTYPE_P3P_10G_CX4:
case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->autoneg = adapter->link_autoneg;
break;
case QLCNIC_BRDTYPE_P3_IMEZ:
case QLCNIC_BRDTYPE_P3_XG_LOM:
case QLCNIC_BRDTYPE_P3_HMEZ:
case QLCNIC_BRDTYPE_P3P_IMEZ:
case QLCNIC_BRDTYPE_P3P_XG_LOM:
case QLCNIC_BRDTYPE_P3P_HMEZ:
ecmd->supported |= SUPPORTED_MII;
ecmd->advertising |= ADVERTISED_MII;
ecmd->port = PORT_MII;
ecmd->autoneg = AUTONEG_DISABLE;
break;
case QLCNIC_BRDTYPE_P3_10G_SFP_PLUS:
case QLCNIC_BRDTYPE_P3_10G_SFP_CT:
case QLCNIC_BRDTYPE_P3_10G_SFP_QT:
case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
ecmd->advertising |= ADVERTISED_TP;
ecmd->supported |= SUPPORTED_TP;
check_sfp_module = netif_running(dev) &&
adapter->has_link_events;
case QLCNIC_BRDTYPE_P3_10G_XFP:
case QLCNIC_BRDTYPE_P3P_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
case QLCNIC_BRDTYPE_P3_10G_TP:
case QLCNIC_BRDTYPE_P3P_10G_TP:
if (adapter->ahw.port_type == QLCNIC_XGBE) {
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
......@@ -381,9 +381,9 @@ static u32 qlcnic_test_link(struct net_device *dev)
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 val;
val = QLCRD32(adapter, CRB_XG_STATE_P3);
val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
return (val == XG_LINK_UP_P3) ? 0 : 1;
val = QLCRD32(adapter, CRB_XG_STATE_P3P);
val = XG_LINK_STATE_P3P(adapter->ahw.pci_func, val);
return (val == XG_LINK_UP_P3P) ? 0 : 1;
}
static int
......
......@@ -556,18 +556,18 @@ enum {
#define XG_LINK_UP 0x10
#define XG_LINK_DOWN 0x20
#define XG_LINK_UP_P3 0x01
#define XG_LINK_DOWN_P3 0x02
#define XG_LINK_STATE_P3_MASK 0xf
#define XG_LINK_STATE_P3(pcifn, val) \
(((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK)
#define P3_LINK_SPEED_MHZ 100
#define P3_LINK_SPEED_MASK 0xff
#define P3_LINK_SPEED_REG(pcifn) \
#define XG_LINK_UP_P3P 0x01
#define XG_LINK_DOWN_P3P 0x02
#define XG_LINK_STATE_P3P_MASK 0xf
#define XG_LINK_STATE_P3P(pcifn, val) \
(((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3P_MASK)
#define P3P_LINK_SPEED_MHZ 100
#define P3P_LINK_SPEED_MASK 0xff
#define P3P_LINK_SPEED_REG(pcifn) \
(CRB_PF_LINK_SPEED_1 + (((pcifn) / 4) * 4))
#define P3_LINK_SPEED_VAL(pcifn, reg) \
(((reg) >> (8 * ((pcifn) & 0x3))) & P3_LINK_SPEED_MASK)
#define P3P_LINK_SPEED_VAL(pcifn, reg) \
(((reg) >> (8 * ((pcifn) & 0x3))) & P3P_LINK_SPEED_MASK)
#define QLCNIC_CAM_RAM_BASE (QLCNIC_CRB_CAM + 0x02000)
#define QLCNIC_CAM_RAM(reg) (QLCNIC_CAM_RAM_BASE + (reg))
......@@ -592,7 +592,7 @@ enum {
#define CRB_CMDPEG_STATE (QLCNIC_REG(0x50))
#define CRB_RCVPEG_STATE (QLCNIC_REG(0x13c))
#define CRB_XG_STATE_P3 (QLCNIC_REG(0x98))
#define CRB_XG_STATE_P3P (QLCNIC_REG(0x98))
#define CRB_PF_LINK_SPEED_1 (QLCNIC_REG(0xe8))
#define CRB_PF_LINK_SPEED_2 (QLCNIC_REG(0xec))
......
......@@ -754,9 +754,9 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu)
struct qlcnic_adapter *adapter = netdev_priv(netdev);
int rc = 0;
if (mtu < P3_MIN_MTU || mtu > P3_MAX_MTU) {
if (mtu < P3P_MIN_MTU || mtu > P3P_MAX_MTU) {
dev_err(&adapter->netdev->dev, "%d bytes < mtu < %d bytes"
" not supported\n", P3_MAX_MTU, P3_MIN_MTU);
" not supported\n", P3P_MAX_MTU, P3P_MIN_MTU);
return -EINVAL;
}
......@@ -1161,31 +1161,31 @@ int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
adapter->ahw.board_type = board_type;
if (board_type == QLCNIC_BRDTYPE_P3_4_GB_MM) {
if (board_type == QLCNIC_BRDTYPE_P3P_4_GB_MM) {
u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I);
if ((gpio & 0x8000) == 0)
board_type = QLCNIC_BRDTYPE_P3_10G_TP;
board_type = QLCNIC_BRDTYPE_P3P_10G_TP;
}
switch (board_type) {
case QLCNIC_BRDTYPE_P3_HMEZ:
case QLCNIC_BRDTYPE_P3_XG_LOM:
case QLCNIC_BRDTYPE_P3_10G_CX4:
case QLCNIC_BRDTYPE_P3_10G_CX4_LP:
case QLCNIC_BRDTYPE_P3_IMEZ:
case QLCNIC_BRDTYPE_P3_10G_SFP_PLUS:
case QLCNIC_BRDTYPE_P3_10G_SFP_CT:
case QLCNIC_BRDTYPE_P3_10G_SFP_QT:
case QLCNIC_BRDTYPE_P3_10G_XFP:
case QLCNIC_BRDTYPE_P3_10000_BASE_T:
case QLCNIC_BRDTYPE_P3P_HMEZ:
case QLCNIC_BRDTYPE_P3P_XG_LOM:
case QLCNIC_BRDTYPE_P3P_10G_CX4:
case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
case QLCNIC_BRDTYPE_P3P_IMEZ:
case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
case QLCNIC_BRDTYPE_P3P_10G_XFP:
case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
adapter->ahw.port_type = QLCNIC_XGBE;
break;
case QLCNIC_BRDTYPE_P3_REF_QG:
case QLCNIC_BRDTYPE_P3_4_GB:
case QLCNIC_BRDTYPE_P3_4_GB_MM:
case QLCNIC_BRDTYPE_P3P_REF_QG:
case QLCNIC_BRDTYPE_P3P_4_GB:
case QLCNIC_BRDTYPE_P3P_4_GB_MM:
adapter->ahw.port_type = QLCNIC_GBE;
break;
case QLCNIC_BRDTYPE_P3_10G_TP:
case QLCNIC_BRDTYPE_P3P_10G_TP:
adapter->ahw.port_type = (adapter->portnum < 2) ?
QLCNIC_XGBE : QLCNIC_GBE;
break;
......
......@@ -259,14 +259,14 @@ int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter)
switch (ring) {
case RCV_RING_NORMAL:
rds_ring->num_desc = adapter->num_rxd;
rds_ring->dma_size = QLCNIC_P3_RX_BUF_MAX_LEN;
rds_ring->dma_size = QLCNIC_P3P_RX_BUF_MAX_LEN;
rds_ring->skb_size = rds_ring->dma_size + NET_IP_ALIGN;
break;
case RCV_RING_JUMBO:
rds_ring->num_desc = adapter->num_jumbo_rxd;
rds_ring->dma_size =
QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN;
QLCNIC_P3P_RX_JUMBO_BUF_MAX_LEN;
if (adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
rds_ring->dma_size += QLCNIC_LRO_BUFFER_EXTRA;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment