Commit ff2e6d7e authored by Paul Mackerras's avatar Paul Mackerras

powerpc: Fix goof in 6xx and POWER4 idle power-save functions

This fixes a mistake I made when editing these functions - when I
took out the interrupt disabling code (because interrupts are now
disabled by the caller) I left the register that is used for the MSR
value to be used during doze/nap uninitialized.  This fixes it.

Also updated some of the comments in idle_power4.S and removed some
code that was copied over from idle_6xx.S but is no longer relevant
(we don't ever clear the CPU_FTR_CAN_NAP bit at runtime for POWER4).
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 9618edab
......@@ -144,7 +144,8 @@ BEGIN_FTR_SECTION
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
ori r7,r7,MSR_EE /* Could be ommited (already set) */
mfmsr r7
ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
sync
isync
......
/*
* This file contains the power_save function for 6xx & 7xxx CPUs
* rewritten in assembler
*
* Warning ! This code assumes that if your machine has a 750fx
* it will have PLL 1 set to low speed mode (used during NAP/DOZE).
* if this is not the case some additional changes will have to
* be done to check a runtime var (a bit like powersave-nap)
* This file contains the power_save function for 970-family CPUs.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -26,23 +20,10 @@
.text
/*
* Here is the power_save_6xx function. This could eventually be
* split into several functions & changing the function pointer
* depending on the various features.
*/
_GLOBAL(power4_idle)
BEGIN_FTR_SECTION
blr
END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
/* We must dynamically check for the NAP feature as it
* can be cleared by CPU init after the fixups are done
*/
LOAD_REG_ADDRBASE(r3,cur_cpu_spec)
ld r4,ADDROFF(cur_cpu_spec)(r3)
ld r4,CPU_SPEC_FEATURES(r4)
andi. r0,r4,CPU_FTR_CAN_NAP
beqlr
/* Now check if user or arch enabled NAP mode */
LOAD_REG_ADDRBASE(r3,powersave_nap)
lwz r4,ADDROFF(powersave_nap)(r3)
......@@ -54,6 +35,8 @@ BEGIN_FTR_SECTION
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
mfmsr r7
ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
sync
isync
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment