Skip to content

L
linux
Commit ff36bed5 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: align PMIC GPIO pin configuration with DT schema 

DT schema expects PMIC GPIO pin configuration nodes to be named with
'-state' suffix.  Optional children should be either 'pinconf' or
followed with '-pins' suffix.  This fixes dtbs_check warnings like:

  sdm845-xiaomi-beryllium.dtb: gpios@c000: 'vol-up-active' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507194913.261121-6-krzysztof.kozlowski@linaro.org
parent 4148a9ee
Hide whitespace changes
Inline Side-by-side
Showing with 86 additions and 86 deletions
arch/arm64/boot/dts/qcom/apq8016-sbc.dts
View file @ ff36bed5
......@@ -773,7 +773,7 @@ &pm8916_gpios {
"USB_HUB_RESET_N_PM",
"USB_SW_SEL_PM";
usb_hub_reset_pm: usb-hub-reset-pm {
usb_hub_reset_pm: usb-hub-reset-pm-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -781,14 +781,14 @@ usb_hub_reset_pm: usb-hub-reset-pm {
output-high;
};
usb_hub_reset_pm_device: usb-hub-reset-pm-device {
usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
usb_sw_sel_pm: usb-sw-sel-pm {
usb_sw_sel_pm: usb-sw-sel-pm-state {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -797,7 +797,7 @@ usb_sw_sel_pm: usb-sw-sel-pm {
output-high;
};
usb_sw_sel_pm_device: usb-sw-sel-pm-device {
usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -806,7 +806,7 @@ usb_sw_sel_pm_device: usb-sw-sel-pm-device {
output-low;
};
pm8916_gpios_leds: pm8916-gpios-leds {
pm8916_gpios_leds: pm8916-gpios-leds-state {
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
......
arch/arm64/boot/dts/qcom/apq8096-db820c.dts
View file @ ff36bed5
......@@ -555,7 +555,7 @@ &pm8994_gpios {
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
ls_exp_gpio_f: pm8994_gpio5 {
ls_exp_gpio_f: pm8994-gpio5-state {
pinconf {
pins = "gpio5";
output-low;
......@@ -563,7 +563,7 @@ pinconf {
};
};
bt_en_gpios: bt_en_gpios {
bt_en_gpios: bt-en-pios-state {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -574,7 +574,7 @@ pinconf {
};
};
wlan_en_gpios: wlan_en_gpios {
wlan_en_gpios: wlan-en-gpios-state {
pinconf {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -585,7 +585,7 @@ pinconf {
};
};
audio_mclk: clk_div1 {
audio_mclk: clk-div1-state {
pinconf {
pins = "gpio15";
function = "func1";
......@@ -593,7 +593,7 @@ pinconf {
};
};
volume_up_gpio: pm8996_gpio2 {
volume_up_gpio: pm8996-gpio2-state {
pinconf {
pins = "gpio2";
function = "normal";
......@@ -605,7 +605,7 @@ pinconf {
};
};
divclk4_pin_a: divclk4 {
divclk4_pin_a: divclk4-state {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
......@@ -615,7 +615,7 @@ pinconf {
};
};
usb3_vbus_det_gpio: pm8996_gpio22 {
usb3_vbus_det_gpio: pm8996-gpio22-state {
pinconf {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -671,7 +671,7 @@ &pmi8994_gpios {
"NC",
"NC";
usb2_vbus_det_gpio: pmi8996_gpio6 {
usb2_vbus_det_gpio: pmi8996-gpio6-state {
pinconf {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
......
arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
View file @ ff36bed5
......@@ -463,7 +463,7 @@ tsp_en_default: tsp-en-default {
};
&pm8916_gpios {
nfc_clk_req: nfc-clk-req {
nfc_clk_req: nfc-clk-req-state {
pins = "gpio2";
function = "func1";
......
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
View file @ ff36bed5
......@@ -470,7 +470,7 @@ qca6174_bt: bluetooth {
};
&pm8994_gpios {
bt_en_gpios: bt_en_gpios {
bt_en_gpios: bt-en-gpios-state {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -481,7 +481,7 @@ pinconf {
};
};
divclk4_pin_a: divclk4 {
divclk4_pin_a: divclk4-state {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
......@@ -519,19 +519,19 @@ &pmi8994_gpios {
* TODO: remove once a driver is available
* TODO: add VBUS GPIO 5
*/
hd3ss460_pol: pol_low {
hd3ss460_pol: pol-low-state {
pins = "gpio8";
drive-strength = <3>;
bias-pull-down;
};
hd3ss460_amsel: amsel_high {
hd3ss460_amsel: amsel-high-state {
pins = "gpio9";
drive-strength = <1>;
bias-pull-up;
};
hd3ss460_en: en_high {
hd3ss460_en: en-high-state {
pins = "gpio10";
drive-strength = <1>;
bias-pull-up;
......
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
View file @ ff36bed5
......@@ -242,14 +242,14 @@ &pm8994_gpios {
* probably a reason for it, and just to be on the safe side, we follow suit.
*/
pm8994_gpios_defaults: pm8994-gpios-default-state {
pm8994-gpio1-nc {
pm8994-gpio1-nc-pins {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
bias-high-impedance;
};
vol-down-n {
vol-down-n-pins {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -259,7 +259,7 @@ vol-down-n {
power-source = <PM8994_GPIO_S4>;
};
vol-up-n {
vol-up-n-pins {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -268,7 +268,7 @@ vol-up-n {
power-source = <PM8994_GPIO_S4>;
};
camera-snapshot-n {
camera-snapshot-n-pins {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -278,7 +278,7 @@ camera-snapshot-n {
power-source = <PM8994_GPIO_S4>;
};
camera-focus-n {
camera-focus-n-pins {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -288,7 +288,7 @@ camera-focus-n {
power-source = <PM8994_GPIO_S4>;
};
pm8994-gpio6-nc {
pm8994-gpio6-nc-pins {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -296,7 +296,7 @@ pm8994-gpio6-nc {
power-source = <PM8994_GPIO_VPH>;
};
nfc-download {
nfc-download-pins {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
......@@ -306,7 +306,7 @@ nfc-download {
power-source = <PM8994_GPIO_S4>;
};
pm8994-gpio8-nc {
pm8994-gpio8-nc-pins {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
......@@ -316,7 +316,7 @@ pm8994-gpio8-nc {
power-source = <PM8994_GPIO_VPH>;
};
pm8994-gpio9-nc {
pm8994-gpio9-nc-pins {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
......@@ -326,7 +326,7 @@ pm8994-gpio9-nc {
power-source = <PM8994_GPIO_VPH>;
};
nfc-clock {
nfc-clock-pins {
pins = "gpio10";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
......@@ -336,7 +336,7 @@ nfc-clock {
power-source = <PM8994_GPIO_S4>;
};
pm8994-gpio11-nc {
pm8994-gpio11-nc-pins {
pins = "gpio11";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -344,7 +344,7 @@ pm8994-gpio11-nc {
power-source = <PM8994_GPIO_VPH>;
};
pm8994-gpio12-nc {
pm8994-gpio12-nc-pins {
pins = "gpio12";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -352,7 +352,7 @@ pm8994-gpio12-nc {
power-source = <PM8994_GPIO_VPH>;
};
ear-enable {
ear-enable-pins {
pins = "gpio13";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
......@@ -362,7 +362,7 @@ ear-enable {
power-source = <PM8994_GPIO_S4>;
};
pm8994-gpio14-nc {
pm8994-gpio14-nc-pins {
pins = "gpio14";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -372,7 +372,7 @@ pm8994-gpio14-nc {
power-source = <PM8994_GPIO_VPH>;
};
pm-divclk1-gpio {
pm-divclk1-gpio-pins {
pins = "gpio15";
function = "func1";
output-high;
......@@ -382,13 +382,13 @@ pm-divclk1-gpio {
power-source = <PM8994_GPIO_VPH>;
};
pmi-clk-gpio {
pmi-clk-gpio-pins {
pins = "gpio16";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
};
pm8994-gpio17-nc {
pm8994-gpio17-nc-pins {
pins = "gpio17";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -396,7 +396,7 @@ pm8994-gpio17-nc {
power-source = <PM8994_GPIO_VPH>;
};
rome-sleep {
rome-sleep-pins {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
output-low;
......@@ -406,7 +406,7 @@ rome-sleep {
power-source = <PM8994_GPIO_S4>;
};
pm8994-gpio19-nc {
pm8994-gpio19-nc-pins {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
......@@ -416,7 +416,7 @@ pm8994-gpio19-nc {
power-source = <PM8994_GPIO_VPH>;
};
pm8994-gpio22-nc {
pm8994-gpio22-nc-pins {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -441,34 +441,34 @@ &pm8994_mpps {
"RF_ID";
pm8994_mpps_defaults: pm8994-mpps-default-state {
lcd-id_adc-mpp {
lcd-id_adc-mpp-pins {
pins = "mpp2";
function = "analog";
input-enable;
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
};
pm-mpp4-nc {
pm-mpp4-nc-pins {
pins = "mpp4";
function = "digital";
bias-high-impedance;
power-source = <PM8994_GPIO_VPH>;
};
flash-therm-mpp {
flash-therm-mpp-pins {
pins = "mpp5";
function = "analog";
input-enable;
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
};
mpp6-nc {
mpp6-nc-pins {
pins = "mpp6";
function = "digital";
bias-high-impedance;
};
rf-id-mpp {
rf-id-mpp-pins {
pins = "mpp8";
function = "analog";
input-enable;
......@@ -499,7 +499,7 @@ &pmi8994_gpios {
"NC";
pmi8994_gpios_defaults: pmi8994-gpios-default-state {
vib-ldo-en-gpio {
vib-ldo-en-gpio-pins {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -508,7 +508,7 @@ vib-ldo-en-gpio {
power-source = <PM8994_GPIO_S4>;
};
pmi-gpio2-nc {
pmi-gpio2-nc-pins {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -518,7 +518,7 @@ pmi-gpio2-nc {
power-source = <PM8994_GPIO_VPH>;
};
pmi-gpio3-nc {
pmi-gpio3-nc-pins {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -528,7 +528,7 @@ pmi-gpio3-nc {
power-source = <PM8994_GPIO_VPH>;
};
pmi-gpio4-nc {
pmi-gpio4-nc-pins {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -537,7 +537,7 @@ pmi-gpio4-nc {
power-source = <PM8994_GPIO_S4>;
};
pmi-gpio5-nc {
pmi-gpio5-nc-pins {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -546,7 +546,7 @@ pmi-gpio5-nc {
power-source = <PM8994_GPIO_S4>;
};
pmi-gpio6-nc {
pmi-gpio6-nc-pins {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -555,7 +555,7 @@ pmi-gpio6-nc {
power-source = <PM8994_GPIO_S4>;
};
pmi-gpio7-nc {
pmi-gpio7-nc-pins {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -564,7 +564,7 @@ pmi-gpio7-nc {
power-source = <PM8994_GPIO_S4>;
};
pmi-gpio8-nc {
pmi-gpio8-nc-pins {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
......@@ -573,13 +573,13 @@ pmi-gpio8-nc {
power-source = <PM8994_GPIO_S4>;
};
usb-switch-sel {
usb-switch-sel-pins {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
drive-push-pull;
};
pmi-gpio10-nc {
pmi-gpio10-nc-pins {
pins = "gpio10";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
......
arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
View file @ ff36bed5
......@@ -608,7 +608,7 @@ vdd_gfx: s2 {
};
&pm8994_gpios {
wlan_en_default: wlan-en-default {
wlan_en_default: wlan-en-state {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
......@@ -617,7 +617,7 @@ wlan_en_default: wlan-en-default {
bias-disable;
};
rome_enable_default: rome-enable-default {
rome_enable_default: rome-enable-state {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
......@@ -625,7 +625,7 @@ rome_enable_default: rome-enable-default {
power-source = <PM8994_GPIO_VPH>;
};
divclk1_default: divclk1_default {
divclk1_default: divclk1-state {
pins = "gpio15";
function = PMIC_GPIO_FUNC_FUNC1;
bias-disable;
......@@ -633,7 +633,7 @@ divclk1_default: divclk1_default {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
divclk4_pin_a: divclk4 {
divclk4_pin_a: divclk4-state {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
......
arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
View file @ ff36bed5
......@@ -257,7 +257,7 @@ &pm8994_gpios {
"UIM_BATT_ALARM", /* GPIO_21 */
"NC"; /* GPIO_22 */
divclk2_pin_a: divclk2 {
divclk2_pin_a: divclk2-state {
pins = "gpio16";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
......
arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
View file @ ff36bed5
......@@ -345,7 +345,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */
};
&pm8998_gpio {
vol_up_pin_a: vol-up-active {
vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
bias-pull-up;
......@@ -353,7 +353,7 @@ vol_up_pin_a: vol-up-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
cam_focus_pin_a: cam-focus-btn-active {
cam_focus_pin_a: cam-focus-btn-active-state {
pins = "gpio7";
function = "normal";
bias-pull-up;
......@@ -361,7 +361,7 @@ cam_focus_pin_a: cam-focus-btn-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
cam_snapshot_pin_a: cam-snapshot-btn-active {
cam_snapshot_pin_a: cam-snapshot-btn-active-state {
pins = "gpio8";
function = "normal";
bias-pull-up;
......
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
View file @ ff36bed5
......@@ -32,7 +32,7 @@ button-backlight {
};
&pmi8998_gpio {
button_backlight_default: button-backlight-default {
button_backlight_default: button-backlight-state {
pinconf {
pins = "gpio5";
function = "normal";
......
arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
View file @ ff36bed5
......@@ -270,7 +270,7 @@ pm8005_s1: s1 {
};
&pm8998_gpio {
vol_keys_default: vol-keys-default {
vol_keys_default: vol-keys-state {
pins = "gpio5", "gpio6";
function = "normal";
bias-pull-up;
......
arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
View file @ ff36bed5
......@@ -38,7 +38,7 @@ &lab {
};
&pmi8998_gpio {
disp_dvdd_en: disp-dvdd-en-active {
disp_dvdd_en: disp-dvdd-en-active-state {
pins = "gpio10";
function = "normal";
bias-disable;
......
arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
View file @ ff36bed5
......@@ -286,7 +286,7 @@ pm8005_s1: s1 {
};
&pm8998_gpio {
vol_down_pin_a: vol-down-active {
vol_down_pin_a: vol-down-active-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
......@@ -294,7 +294,7 @@ vol_down_pin_a: vol-down-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
cam_focus_pin_a: cam-focus-btn-active {
cam_focus_pin_a: cam-focus-btn-active-state {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
......@@ -302,7 +302,7 @@ cam_focus_pin_a: cam-focus-btn-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
cam_snapshot_pin_a: cam-snapshot-btn-active {
cam_snapshot_pin_a: cam-snapshot-btn-active-state {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
......@@ -310,7 +310,7 @@ cam_snapshot_pin_a: cam-snapshot-btn-active {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
audio_mclk_pin: audio-mclk-pin-active {
audio_mclk_pin: audio-mclk-pin-active-state {
pins = "gpio13";
function = "func2";
power-source = <0>;
......@@ -318,7 +318,7 @@ audio_mclk_pin: audio-mclk-pin-active {
};
&pmi8998_gpio {
cam_vio_default: cam-vio-active {
cam_vio_default: cam-vio-active-state {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
......@@ -328,7 +328,7 @@ cam_vio_default: cam-vio-active {
power-source = <1>;
};
vib_default: vib-en {
vib_default: vib-en-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
......
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
View file @ ff36bed5
......@@ -304,7 +304,7 @@ pinconf {
};
&pms405_gpios {
usb_vbus_boost_pin: usb-vbus-boost-pin {
usb_vbus_boost_pin: usb-vbus-boost-state {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -312,7 +312,7 @@ pinconf {
power-source = <1>;
};
};
usb3_vbus_pin: usb3-vbus-pin {
usb3_vbus_pin: usb3-vbus-state {
pinconf {
pins = "gpio12";
function = PMIC_GPIO_FUNC_NORMAL;
......
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
View file @ ff36bed5
......@@ -796,7 +796,7 @@ &pm8150l_gpios {
"NC",
"PM3003A_MODE";
lt9611_rst_pin: lt9611-rst-pin {
lt9611_rst_pin: lt9611-rst-state {
pins = "gpio5";
function = "normal";
......
arch/arm64/boot/dts/qcom/sc7180-idp.dts
View file @ ff36bed5
......@@ -467,7 +467,7 @@ wifi-firmware {
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
&pm6150l_gpio {
disp_pins: disp-pins {
disp_pins: disp-state {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_FUNC1;
......
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
View file @ ff36bed5
......@@ -444,7 +444,7 @@ &mi2s1_ws {
};
&pm7325_gpios {
key_vol_up_default: key-vol-up-default {
key_vol_up_default: key-vol-up-state {
pins = "gpio6";
function = "normal";
input-enable;
......
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
View file @ ff36bed5
......@@ -523,7 +523,7 @@ &sdc1_rclk {
*/
&pm8350c_gpios {
pmic_edp_bl_en: pmic-edp-bl-en {
pmic_edp_bl_en: pmic-edp-bl-en-state {
pins = "gpio7";
function = "normal";
bias-disable;
......@@ -533,7 +533,7 @@ pmic_edp_bl_en: pmic-edp-bl-en {
output-low;
};
pmic_edp_bl_pwm: pmic-edp-bl-pwm {
pmic_edp_bl_pwm: pmic-edp-bl-pwm-state {
pins = "gpio8";
function = "func1";
bias-disable;
......
arch/arm64/boot/dts/qcom/sdm845-db845c.dts
View file @ ff36bed5
......@@ -569,7 +569,7 @@ &pm8998_gpio {
"OPTION2",
"PM845_SLB";
cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en {
cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
pins = "gpio12";
function = "normal";
......@@ -578,7 +578,7 @@ cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
cam0_avdd_2v8_en_default: cam0-avdd-2v8-en {
cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
pins = "gpio10";
function = "normal";
......@@ -587,7 +587,7 @@ cam0_avdd_2v8_en_default: cam0-avdd-2v8-en {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
vol_up_pin_a: vol-up-active {
vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
input-enable;
......
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
View file @ ff36bed5
......@@ -440,7 +440,7 @@ &mss_pil {
};
&pm8998_gpio {
volume_down_gpio: pm8998_gpio5 {
volume_down_gpio: pm8998-gpio5-state {
pinconf {
pins = "gpio5";
function = "normal";
......@@ -450,7 +450,7 @@ pinconf {
};
};
volume_up_gpio: pm8998_gpio6 {
volume_up_gpio: pm8998-gpio6-state {
pinconf {
pins = "gpio6";
function = "normal";
......
arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
View file @ ff36bed5
......@@ -508,7 +508,7 @@ &mss_pil {
};
&pm8998_gpio {
volume_up_gpio: pm8998_gpio6 {
volume_up_gpio: pm8998-gpio6-state {
pinconf {
pins = "gpio6";
function = "normal";
......
arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
View file @ ff36bed5
......@@ -306,7 +306,7 @@ &ipa {
};
&pm8998_gpio {
vol_up_pin_a: vol-up-active {
vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
input-enable;
......
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
View file @ ff36bed5
......@@ -339,7 +339,7 @@ &pm6150l_wled {
};
&pm6350_gpios {
gpio_keys_pin: gpio-keys-pin {
gpio_keys_pin: gpio-keys-state {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7