Commit ff477966 authored by Gavin Shan's avatar Gavin Shan Committed by Benjamin Herrenschmidt

powerpc/eeh: I/O enable and log retrival based on PE

The patch refactors the original implementation in order to enable
I/O and retrieve EEH log based on PE.
Signed-off-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 9e6d2cf6
......@@ -51,8 +51,8 @@ void pci_addr_cache_build(void);
void pci_addr_cache_insert_device(struct pci_dev *dev);
void pci_addr_cache_remove_device(struct pci_dev *dev);
struct pci_dev *pci_addr_cache_get_device(unsigned long addr);
void eeh_slot_error_detail(struct eeh_dev *edev, int severity);
int eeh_pci_enable(struct eeh_dev *edev, int function);
void eeh_slot_error_detail(struct eeh_pe *pe, int severity);
int eeh_pci_enable(struct eeh_pe *pe, int function);
int eeh_reset_pe(struct eeh_dev *);
int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
......
......@@ -207,22 +207,12 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
}
}
/* Gather status on devices under the bridge */
if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
struct device_node *child;
for_each_child_of_node(dn, child) {
if (of_node_to_eeh_dev(child))
n += eeh_gather_pci_data(of_node_to_eeh_dev(child), buf+n, len-n);
}
}
return n;
}
/**
* eeh_slot_error_detail - Generate combined log including driver log and error log
* @edev: device to report error log for
* @pe: EEH PE
* @severity: temporary or permanent error log
*
* This routine should be called to generate the combined log, which
......@@ -230,17 +220,22 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
* out from the config space of the corresponding PCI device, while
* the error log is fetched through platform dependent function call.
*/
void eeh_slot_error_detail(struct eeh_dev *edev, int severity)
void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
{
size_t loglen = 0;
pci_regs_buf[0] = 0;
struct eeh_dev *edev;
eeh_pci_enable(edev, EEH_OPT_THAW_MMIO);
eeh_ops->configure_bridge(eeh_dev_to_of_node(edev));
eeh_restore_bars(edev);
loglen = eeh_gather_pci_data(edev, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
eeh_ops->configure_bridge(pe);
eeh_pe_restore_bars(pe);
eeh_ops->get_log(eeh_dev_to_of_node(edev), severity, pci_regs_buf, loglen);
pci_regs_buf[0] = 0;
eeh_pe_for_each_dev(pe, edev) {
loglen += eeh_gather_pci_data(edev, pci_regs_buf,
EEH_PCI_REGS_LOG_LEN);
}
eeh_ops->get_log(pe, severity, pci_regs_buf, loglen);
}
/**
......@@ -427,23 +422,22 @@ EXPORT_SYMBOL(eeh_check_failure);
/**
* eeh_pci_enable - Enable MMIO or DMA transfers for this slot
* @edev: pci device node
* @pe: EEH PE
*
* This routine should be called to reenable frozen MMIO or DMA
* so that it would work correctly again. It's useful while doing
* recovery or log collection on the indicated device.
*/
int eeh_pci_enable(struct eeh_dev *edev, int function)
int eeh_pci_enable(struct eeh_pe *pe, int function)
{
int rc;
struct device_node *dn = eeh_dev_to_of_node(edev);
rc = eeh_ops->set_option(dn, function);
rc = eeh_ops->set_option(pe, function);
if (rc)
printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n",
function, rc, dn->full_name);
pr_warning("%s: Unexpected state change %d on PHB#%d-PE#%x, err=%d\n",
__func__, function, pe->phb->global_number, pe->addr, rc);
rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC);
rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) &&
(function == EEH_OPT_THAW_MMIO))
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment