Merge branch 'omap/boards' into late/cleanup

* omap/boards:
  ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
  ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
  ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor
  omap2+: Remove useless Makefile line
  omap2+: Remove useless Makefile line
  ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d
  ARM: OMAP1: fix omap_udc registration

arch/arm/configs/omap2plus_defconfig

@@ -93,6 +93,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_SENSORS_LIS3LV02D=m
 CONFIG_SENSORS_TSL2550=m
 CONFIG_SENSORS_LIS3_I2C=m
+CONFIG_BMP085_I2C=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y

arch/arm/mach-omap1/include/mach/usb.h

@@ -2,7 +2,7 @@
  * FIXME correct answer depends on hmc_mode,
  * as does (on omap1) any nonzero value for config->otg port number
  */
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 #define	is_usb0_device(config)	1
 #else
 #define	is_usb0_device(config)	0

arch/arm/mach-omap1/usb.c

@@ -123,7 +123,7 @@ omap_otg_init(struct omap_usb_config *config)
 	syscon = omap_readl(OTG_SYSCON_1);
 	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
 
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	if (config->otg || config->register_dev) {
 		struct platform_device *udc_device = config->udc_device;
 		int status;
@@ -169,7 +169,7 @@ omap_otg_init(struct omap_usb_config *config)
 void omap_otg_init(struct omap_usb_config *config) {}
 #endif
 
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 
 static struct resource udc_resources[] = {
 	/* order is significant! */
@@ -600,7 +600,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 	while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
 		cpu_relax();
 
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	if (config->register_dev) {
 		int status;
 

arch/arm/mach-omap2/Makefile

@@ -229,7 +229,6 @@ obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
-obj-$(CONFIG_MACH_ENCORE)		+= board-omap3encore.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
@@ -255,8 +254,6 @@ obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o
 
-obj-$(CONFIG_MACH_PCM049)		+= board-omap4pcm049.o
-
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o

arch/arm/mach-omap2/board-4430sdp.c

@@ -291,6 +291,10 @@ static struct platform_device sdp4430_leds_pwm = {
 	},
 };
 
+/* Dummy regulator for pwm-backlight driver */
+static struct regulator_consumer_supply backlight_supply =
+	REGULATOR_SUPPLY("enable", "pwm-backlight");
+
 static struct platform_pwm_backlight_data sdp4430_backlight_data = {
 	.max_brightness = 127,
 	.dft_brightness = 127,
@@ -718,6 +722,8 @@ static void __init omap_4430sdp_init(void)
 
 	omap4_i2c_init();
 	omap_sfh7741prox_init();
+	regulator_register_always_on(0, "backlight-enable",
+				     &backlight_supply, 1, 0);
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -547,12 +547,16 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = {
 	REGULATOR_SUPPLY("DVDD", "2-0019"),
 	/* Si4713 IO supply */
 	REGULATOR_SUPPLY("vio", "2-0063"),
+	/* lis3lv02d */
+	REGULATOR_SUPPLY("Vdd_IO", "3-001d"),
 };
 
 static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
 	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
 	/* Si4713 supply */
 	REGULATOR_SUPPLY("vdd", "2-0063"),
+	/* lis3lv02d */
+	REGULATOR_SUPPLY("Vdd", "3-001d"),
 };
 
 static struct regulator_init_data rx51_vaux1 = {

arch/arm/mach-omap2/board-zoom-display.c

@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
@@ -49,59 +48,6 @@ static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
 }
 
-/* Register offsets in TWL4030_MODULE_INTBR */
-#define TWL_INTBR_PMBR1	0xD
-#define TWL_INTBR_GPBR1	0xC
-
-/* Register offsets in TWL_MODULE_PWM */
-#define TWL_LED_PWMON	0x3
-#define TWL_LED_PWMOFF	0x4
-
-static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
-{
-#ifdef CONFIG_TWL4030_CORE
-	unsigned char c;
-	u8 mux_pwm, enb_pwm;
-
-	if (level > 100)
-		return -1;
-
-	twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1);
-	twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1);
-
-	if (level == 0) {
-		/* disable pwm1 output and clock */
-		enb_pwm = enb_pwm & 0xF5;
-		/* change pwm1 pin to gpio pin */
-		mux_pwm = mux_pwm & 0xCF;
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					enb_pwm, TWL_INTBR_GPBR1);
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					mux_pwm, TWL_INTBR_PMBR1);
-		return 0;
-	}
-
-	if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) {
-		/* change gpio pin to pwm1 pin */
-		mux_pwm = mux_pwm | 0x30;
-		/* enable pwm1 output and clock*/
-		enb_pwm = enb_pwm | 0x0A;
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					mux_pwm, TWL_INTBR_PMBR1);
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					enb_pwm, TWL_INTBR_GPBR1);
-	}
-
-	c = ((50 * (100 - level)) / 100) + 1;
-	twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF);
-	twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON);
-#else
-	pr_warn("Backlight not enabled\n");
-#endif
-
-	return 0;
-}
-
 static struct omap_dss_device zoom_lcd_device = {
 	.name			= "lcd",
 	.driver_name		= "NEC_8048_panel",
@@ -109,8 +55,6 @@ static struct omap_dss_device zoom_lcd_device = {
 	.phy.dpi.data_lines	= 24,
 	.platform_enable	= zoom_panel_enable_lcd,
 	.platform_disable	= zoom_panel_disable_lcd,
-	.max_backlight_level	= 100,
-	.set_backlight		= zoom_set_bl_intensity,
 };
 
 static struct omap_dss_device *zoom_dss_devices[] = {

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -22,6 +22,9 @@
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/omap-twl4030.h>
 #include <linux/usb/phy.h>
+#include <linux/pwm.h>
+#include <linux/leds_pwm.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -193,6 +196,53 @@ static struct platform_device omap_vwlan_device = {
 	},
 };
 
+static struct pwm_lookup zoom_pwm_lookup[] = {
+	PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "zoom::keypad"),
+	PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", "backlight"),
+};
+
+static struct led_pwm zoom_pwm_leds[] = {
+	{
+		.name		= "zoom::keypad",
+		.max_brightness	= 127,
+		.pwm_period_ns	= 7812500,
+	},
+};
+
+static struct led_pwm_platform_data zoom_pwm_data = {
+	.num_leds	= ARRAY_SIZE(zoom_pwm_leds),
+	.leds		= zoom_pwm_leds,
+};
+
+static struct platform_device zoom_leds_pwm = {
+	.name	= "leds_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &zoom_pwm_data,
+	},
+};
+
+static struct platform_pwm_backlight_data zoom_backlight_data = {
+	.pwm_id = 1,
+	.max_brightness = 127,
+	.dft_brightness = 127,
+	.pwm_period_ns = 7812500,
+};
+
+static struct platform_device zoom_backlight_pwm = {
+	.name   = "pwm-backlight",
+	.id     = -1,
+	.dev    = {
+		.platform_data = &zoom_backlight_data,
+	},
+};
+
+static struct platform_device *zoom_devices[] __initdata = {
+	&omap_vwlan_device,
+	&zoom_leds_pwm,
+	&zoom_backlight_pwm,
+};
+
 static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
 	.board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
 };
@@ -301,7 +351,8 @@ void __init zoom_peripherals_init(void)
 
 	omap_hsmmc_init(mmc);
 	omap_i2c_init();
-	platform_device_register(&omap_vwlan_device);
+	pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup));
+	platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	enable_board_wakeup_source();