[SCSI] lpfc 8.3.28: SLI fixes and added SLI4 support

Adapter (SLI) interface fixes:

- Modify WQ handling to use entry_repost (CR 123981)
- Fix for ABTS.  Do not free original IOCB whenever ABTS fails. (CR 115829)
- Check board for FCoE before reading FCoE paramaters (CR124731)
- Add support for SLI4 FC Loop mode (CR 124721)
- Add support for resource count changes during fw reset. (CR 125888, 125675)
- Increase CQE count from 256 to 1024. (CR 126149)
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/lpfc/lpfc_attr.c

@@ -2777,6 +2777,14 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr,
 	if (val >= 0 && val <= 6) {
 		prev_val = phba->cfg_topology;
 		phba->cfg_topology = val;
+		if (phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G &&
+			val == 4) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+				"3113 Loop mode not supported at speed %d\n",
+				phba->cfg_link_speed);
+			phba->cfg_topology = prev_val;
+			return -EINVAL;
+		}
 		if (nolip)
 			return strlen(buf);
 
@@ -3222,6 +3230,14 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
 				val);
 		return -EINVAL;
 	}
+	if (val == LPFC_USER_LINK_SPEED_16G &&
+		 phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"3112 lpfc_link_speed attribute cannot be set "
+				"to %d. Speed is not supported in loop mode.\n",
+				val);
+		return -EINVAL;
+	}
 	if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
 	    (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
 		prev_val = phba->cfg_link_speed;
@@ -3266,6 +3282,13 @@ lpfc_param_show(link_speed)
 static int
 lpfc_link_speed_init(struct lpfc_hba *phba, int val)
 {
+	if (val == LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"3111 lpfc_link_speed of %d cannot "
+			"support loop mode, setting topology to default.\n",
+			 val);
+		phba->cfg_topology = 0;
+	}
 	if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
 	    (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
 		phba->cfg_link_speed = val;

drivers/scsi/lpfc/lpfc_crtn.h

@@ -453,3 +453,5 @@ int lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *, int);
 uint16_t lpfc_sli_sriov_nr_virtfn_get(struct lpfc_hba *);
 int lpfc_sli4_queue_create(struct lpfc_hba *);
 void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+int lpfc_sli4_read_config(struct lpfc_hba *phba);
+int lpfc_scsi_buf_update(struct lpfc_hba *phba);

drivers/scsi/lpfc/lpfc_els.c

@@ -909,15 +909,15 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		 */
 		if (phba->alpa_map[0] == 0) {
 			vport->cfg_discovery_threads = LPFC_MAX_DISC_THREADS;
-			if ((phba->sli_rev == LPFC_SLI_REV4) &&
-			    (!(vport->fc_flag & FC_VFI_REGISTERED) ||
-			     (vport->fc_prevDID != vport->fc_myDID))) {
-				if (vport->fc_flag & FC_VFI_REGISTERED)
-					lpfc_sli4_unreg_all_rpis(vport);
-				lpfc_issue_reg_vfi(vport);
-				lpfc_nlp_put(ndlp);
-				goto out;
-			}
+		}
+		if ((phba->sli_rev == LPFC_SLI_REV4) &&
+		    (!(vport->fc_flag & FC_VFI_REGISTERED) ||
+		     (vport->fc_prevDID != vport->fc_myDID))) {
+			if (vport->fc_flag & FC_VFI_REGISTERED)
+				lpfc_sli4_unreg_all_rpis(vport);
+			lpfc_issue_reg_vfi(vport);
+			lpfc_nlp_put(ndlp);
+			goto out;
 		}
 		goto flogifail;
 	}

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -2858,7 +2858,6 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
 		/* For private loop just start discovery and we are done. */
 		if ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
-		    (phba->alpa_map[0] == 0) &&
 		    !(vport->fc_flag & FC_PUBLIC_LOOP)) {
 			/* Use loop map to make discovery list */
 			lpfc_disc_list_loopmap(vport);

drivers/scsi/lpfc/lpfc_init.c

@@ -62,7 +62,6 @@ static int lpfc_post_rcv_buf(struct lpfc_hba *);
 static int lpfc_sli4_queue_verify(struct lpfc_hba *);
 static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
 static int lpfc_setup_endian_order(struct lpfc_hba *);
-static int lpfc_sli4_read_config(struct lpfc_hba *);
 static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
 static void lpfc_free_sgl_list(struct lpfc_hba *);
 static int lpfc_init_sgl_list(struct lpfc_hba *);
@@ -2654,6 +2653,32 @@ lpfc_offline(struct lpfc_hba *phba)
 	lpfc_destroy_vport_work_array(phba, vports);
 }
 
+/**
+ * lpfc_scsi_buf_update - Update the scsi_buffers that are already allocated.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine goes through all the scsi buffers in the system and updates the
+ * Physical XRIs assigned to the SCSI buffer because these may change after any
+ * firmware reset
+ *
+ * Return codes
+ *   0 - successful (for now, it always returns 0)
+ **/
+int
+lpfc_scsi_buf_update(struct lpfc_hba *phba)
+{
+	struct lpfc_scsi_buf *sb, *sb_next;
+
+	spin_lock_irq(&phba->hbalock);
+	spin_lock(&phba->scsi_buf_list_lock);
+	list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list)
+		sb->cur_iocbq.sli4_xritag =
+			phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag];
+	spin_unlock(&phba->scsi_buf_list_lock);
+	spin_unlock_irq(&phba->hbalock);
+	return 0;
+}
+
 /**
  * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
  * @phba: pointer to lpfc hba data structure.
@@ -5021,15 +5046,8 @@ lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
 	struct lpfc_rpi_hdr *rpi_hdr;
 
 	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
-	/*
-	 * If the SLI4 port supports extents, posting the rpi header isn't
-	 * required.  Set the expected maximum count and let the actual value
-	 * get set when extents are fully allocated.
-	 */
-	if (!phba->sli4_hba.rpi_hdrs_in_use) {
-		phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+	if (!phba->sli4_hba.rpi_hdrs_in_use)
 		return rc;
-	}
 	if (phba->sli4_hba.extents_in_use)
 		return -EIO;
 
@@ -5923,7 +5941,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
  * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
-static int
+int
 lpfc_sli4_read_config(struct lpfc_hba *phba)
 {
 	LPFC_MBOXQ_t *pmb;
@@ -5955,6 +5973,20 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
 		rc = -EIO;
 	} else {
 		rd_config = &pmb->u.mqe.un.rd_config;
+		if (bf_get(lpfc_mbx_rd_conf_lnk_ldv, rd_config)) {
+			phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
+			phba->sli4_hba.lnk_info.lnk_tp =
+				bf_get(lpfc_mbx_rd_conf_lnk_type, rd_config);
+			phba->sli4_hba.lnk_info.lnk_no =
+				bf_get(lpfc_mbx_rd_conf_lnk_numb, rd_config);
+			lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+					"3081 lnk_type:%d, lnk_numb:%d\n",
+					phba->sli4_hba.lnk_info.lnk_tp,
+					phba->sli4_hba.lnk_info.lnk_no);
+		} else
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"3082 Mailbox (x%x) returned ldv:x0\n",
+					bf_get(lpfc_mqe_command, &pmb->u.mqe));
 		phba->sli4_hba.extents_in_use =
 			bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config);
 		phba->sli4_hba.max_cfg_param.max_xri =

drivers/scsi/lpfc/lpfc_sli4.h

@@ -291,7 +291,7 @@ struct lpfc_bmbx {
 #define LPFC_RQE_SIZE		8
 
 #define LPFC_EQE_DEF_COUNT	1024
-#define LPFC_CQE_DEF_COUNT      256
+#define LPFC_CQE_DEF_COUNT      1024
 #define LPFC_WQE_DEF_COUNT      256
 #define LPFC_MQE_DEF_COUNT      16
 #define LPFC_RQE_DEF_COUNT	512