Commit ff9a93f2 authored by Sujith Manoharan's avatar Sujith Manoharan Committed by John W. Linville

ath9k: Use correct channel for RX packets

Accessing the current channel definition in mac80211
when processing RX packets is problematic because it
could have been updated when a scan is issued. Since a
channel change involves flushing the existing packets
in the RX queue before a chip-reset is done, they would
be processed using the wrong band/channel information.

To avoid this, use the current channel information
maintained in the driver.

Cc: stable@vger.kernel.org
Reported-by: default avatarOleksij Rempel <linux@rempel-privat.de>
Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 9c36254c
......@@ -850,20 +850,15 @@ static int ath9k_process_rate(struct ath_common *common,
enum ieee80211_band band;
unsigned int i = 0;
struct ath_softc __maybe_unused *sc = common->priv;
struct ath_hw *ah = sc->sc_ah;
band = hw->conf.chandef.chan->band;
band = ah->curchan->chan->band;
sband = hw->wiphy->bands[band];
switch (hw->conf.chandef.width) {
case NL80211_CHAN_WIDTH_5:
if (IS_CHAN_QUARTER_RATE(ah->curchan))
rxs->flag |= RX_FLAG_5MHZ;
break;
case NL80211_CHAN_WIDTH_10:
else if (IS_CHAN_HALF_RATE(ah->curchan))
rxs->flag |= RX_FLAG_10MHZ;
break;
default:
break;
}
if (rx_stats->rs_rate & 0x80) {
/* HT rate */
......@@ -1078,6 +1073,14 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr);
/*
* This shouldn't happen, but have a safety check anyway.
*/
if (WARN_ON(!ah->curchan)) {
ret = -EINVAL;
goto exit;
}
if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
ret =-EINVAL;
goto exit;
......@@ -1085,8 +1088,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
ath9k_process_rssi(common, hw, rx_stats, rx_status);
rx_status->band = hw->conf.chandef.chan->band;
rx_status->freq = hw->conf.chandef.chan->center_freq;
rx_status->band = ah->curchan->chan->band;
rx_status->freq = ah->curchan->chan->center_freq;
rx_status->antenna = rx_stats->rs_antenna;
rx_status->flag |= RX_FLAG_MACTIME_END;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment