clk: qcom: Update the force mem core bit for GPU clocks

There are few GPU clocks which are powering up the memories
and thus enable the FORCE_MEM_PERIPH always for these clocks
to force the periph_on signal to remain active during halt
state of the clock.

Fixes: a3cc0921 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Fixes: 3e0f01d6 ("clk: qcom: Add graphics clock controller driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Link: https://lore.kernel.org/r/1666159535-6447-1-git-send-email-quic_c_skakit@quicinc.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

drivers/clk/qcom/gcc-sc7280.c

@@ -3467,6 +3467,7 @@ static int gcc_sc7280_probe(struct platform_device *pdev)
 	regmap_update_bits(regmap, 0x28004, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0x28014, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x7100C, BIT(13), BIT(13));
 
 	ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
 			ARRAY_SIZE(gcc_dfs_clocks));

drivers/clk/qcom/gpucc-sc7280.c

@@ -463,6 +463,7 @@ static int gpu_cc_sc7280_probe(struct platform_device *pdev)
 	 */
 	regmap_update_bits(regmap, 0x1170, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0x1098, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x1098, BIT(13), BIT(13));
 
 	return qcom_cc_really_probe(pdev, &gpu_cc_sc7280_desc, regmap);
 }