Commit ffd0436e authored by Mike Christie's avatar Mike Christie Committed by James Bottomley

[SCSI] libiscsi, iscsi_tcp, iscsi_iser: check that burst lengths are valid.

iSCSI RFC states that the first burst length must be smaller than the
max burst length. We currently assume targets will be good, but that may
not be the case, so this patch adds a check.

This patch also moves the unsol data out offset to the lib so the LLDs
do not have to track it.
Signed-off-by: default avatarMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent e5b3cd42
......@@ -141,18 +141,11 @@ iscsi_iser_cmd_init(struct iscsi_cmd_task *ctask)
if (sc->sc_data_direction == DMA_TO_DEVICE) {
BUG_ON(ctask->total_length == 0);
/* bytes to be sent via RDMA operations */
iser_ctask->rdma_data_count = ctask->total_length -
ctask->imm_count -
ctask->unsol_count;
debug_scsi("cmd [itt %x total %d imm %d unsol_data %d "
"rdma_data %d]\n",
debug_scsi("cmd [itt %x total %d imm %d unsol_data %d\n",
ctask->itt, ctask->total_length, ctask->imm_count,
ctask->unsol_count, iser_ctask->rdma_data_count);
} else
/* bytes to be sent via RDMA operations */
iser_ctask->rdma_data_count = ctask->total_length;
ctask->unsol_count);
}
iser_ctask_rdma_init(iser_ctask);
}
......@@ -196,13 +189,10 @@ iscsi_iser_ctask_xmit_unsol_data(struct iscsi_conn *conn,
{
struct iscsi_data hdr;
int error = 0;
struct iscsi_iser_cmd_task *iser_ctask = ctask->dd_data;
/* Send data-out PDUs while there's still unsolicited data to send */
while (ctask->unsol_count > 0) {
iscsi_prep_unsolicit_data_pdu(ctask, &hdr,
iser_ctask->rdma_data_count);
iscsi_prep_unsolicit_data_pdu(ctask, &hdr);
debug_scsi("Sending data-out: itt 0x%x, data count %d\n",
hdr.itt, ctask->data_count);
......
......@@ -257,7 +257,6 @@ struct iscsi_iser_conn {
struct iscsi_iser_cmd_task {
struct iser_desc desc;
struct iscsi_iser_conn *iser_conn;
int rdma_data_count;/* RDMA bytes */
enum iser_task_status status;
int command_sent; /* set if command sent */
int dir[ISER_DIRS_NUM]; /* set if dir use*/
......
......@@ -1264,19 +1264,6 @@ iscsi_solicit_data_cont(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask,
r2t->data_count);
}
static void
iscsi_unsolicit_data_init(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
{
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
struct iscsi_data_task *dtask;
dtask = tcp_ctask->dtask = &tcp_ctask->unsol_dtask;
iscsi_prep_unsolicit_data_pdu(ctask, &dtask->hdr,
tcp_ctask->r2t_data_count);
iscsi_buf_init_iov(&tcp_ctask->headbuf, (char*)&dtask->hdr,
sizeof(struct iscsi_hdr));
}
/**
* iscsi_tcp_cmd_init - Initialize iSCSI SCSI_READ or SCSI_WRITE commands
* @conn: iscsi connection
......@@ -1326,14 +1313,11 @@ iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask)
if (ctask->unsol_count)
tcp_ctask->xmstate |= XMSTATE_UNS_HDR |
XMSTATE_UNS_INIT;
tcp_ctask->r2t_data_count = ctask->total_length -
ctask->imm_count -
ctask->unsol_count;
debug_scsi("cmd [itt 0x%x total %d imm %d imm_data %d "
"r2t_data %d]\n",
debug_scsi("cmd [itt 0x%x total %d imm_data %d "
"unsol count %d, unsol offset %d]\n",
ctask->itt, ctask->total_length, ctask->imm_count,
ctask->unsol_count, tcp_ctask->r2t_data_count);
ctask->unsol_count, ctask->unsol_offset);
} else
tcp_ctask->xmstate = XMSTATE_R_HDR;
......@@ -1531,8 +1515,10 @@ handle_xmstate_uns_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
tcp_ctask->xmstate |= XMSTATE_UNS_DATA;
if (tcp_ctask->xmstate & XMSTATE_UNS_INIT) {
iscsi_unsolicit_data_init(conn, ctask);
dtask = tcp_ctask->dtask;
dtask = tcp_ctask->dtask = &tcp_ctask->unsol_dtask;
iscsi_prep_unsolicit_data_pdu(ctask, &dtask->hdr);
iscsi_buf_init_iov(&tcp_ctask->headbuf, (char*)&dtask->hdr,
sizeof(struct iscsi_hdr));
if (conn->hdrdgst_en)
iscsi_hdr_digest(conn, &tcp_ctask->headbuf,
(u8*)dtask->hdrext);
......@@ -1720,7 +1706,6 @@ handle_xmstate_sol_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
* Done with this R2T. Check if there are more
* outstanding R2Ts ready to be processed.
*/
BUG_ON(tcp_ctask->r2t_data_count - r2t->data_length < 0);
if (conn->datadgst_en) {
rc = iscsi_digest_final_send(conn, ctask, &dtask->digestbuf,
&dtask->digest, 1);
......@@ -1732,7 +1717,6 @@ handle_xmstate_sol_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
debug_tcp("r2t done dout digest 0x%x\n", dtask->digest);
}
tcp_ctask->r2t_data_count -= r2t->data_length;
tcp_ctask->r2t = NULL;
spin_lock_bh(&session->lock);
__kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*));
......
......@@ -157,7 +157,6 @@ struct iscsi_tcp_cmd_task {
struct scatterlist *bad_sg; /* assert statement */
int sg_count; /* SG's to process */
uint32_t exp_r2tsn;
int r2t_data_count; /* R2T Data-Out bytes */
int data_offset;
struct iscsi_r2t_info *r2t; /* in progress R2T */
struct iscsi_queue r2tpool;
......
......@@ -68,8 +68,7 @@ iscsi_check_assign_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr)
EXPORT_SYMBOL_GPL(iscsi_check_assign_cmdsn);
void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *ctask,
struct iscsi_data *hdr,
int transport_data_cnt)
struct iscsi_data *hdr)
{
struct iscsi_conn *conn = ctask->conn;
......@@ -82,14 +81,12 @@ void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *ctask,
hdr->itt = ctask->hdr->itt;
hdr->exp_statsn = cpu_to_be32(conn->exp_statsn);
hdr->offset = cpu_to_be32(ctask->total_length -
transport_data_cnt -
ctask->unsol_count);
hdr->offset = cpu_to_be32(ctask->unsol_offset);
if (ctask->unsol_count > conn->max_xmit_dlength) {
hton24(hdr->dlength, conn->max_xmit_dlength);
ctask->data_count = conn->max_xmit_dlength;
ctask->unsol_offset += ctask->data_count;
hdr->flags = 0;
} else {
hton24(hdr->dlength, ctask->unsol_count);
......@@ -125,6 +122,7 @@ static void iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask)
memcpy(hdr->cdb, sc->cmnd, sc->cmd_len);
memset(&hdr->cdb[sc->cmd_len], 0, MAX_COMMAND_SIZE - sc->cmd_len);
ctask->data_count = 0;
if (sc->sc_data_direction == DMA_TO_DEVICE) {
hdr->flags |= ISCSI_FLAG_CMD_WRITE;
/*
......@@ -143,6 +141,7 @@ static void iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask)
*/
ctask->imm_count = 0;
ctask->unsol_count = 0;
ctask->unsol_offset = 0;
ctask->unsol_datasn = 0;
if (session->imm_data_en) {
......@@ -156,9 +155,12 @@ static void iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask)
} else
zero_data(ctask->hdr->dlength);
if (!session->initial_r2t_en)
if (!session->initial_r2t_en) {
ctask->unsol_count = min(session->first_burst,
ctask->total_length) - ctask->imm_count;
ctask->unsol_offset = ctask->imm_count;
}
if (!ctask->unsol_count)
/* No unsolicit Data-Out's */
ctask->hdr->flags |= ISCSI_FLAG_CMD_FINAL;
......@@ -1520,11 +1522,18 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn)
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
if (session == NULL) {
if (!session) {
printk(KERN_ERR "iscsi: can't start unbound connection\n");
return -EPERM;
}
if (session->first_burst > session->max_burst) {
printk("iscsi: invalid burst lengths: "
"first_burst %d max_burst %d\n",
session->first_burst, session->max_burst);
return -EINVAL;
}
spin_lock_bh(&session->lock);
conn->c_stage = ISCSI_CONN_STARTED;
session->state = ISCSI_STATE_LOGGED_IN;
......
......@@ -102,6 +102,8 @@ struct iscsi_cmd_task {
uint32_t unsol_datasn;
int imm_count; /* imm-data (bytes) */
int unsol_count; /* unsolicited (bytes)*/
/* offset in unsolicited stream (bytes); */
int unsol_offset;
int data_count; /* remaining Data-Out */
struct scsi_cmnd *sc; /* associated SCSI cmd*/
int total_length;
......@@ -290,8 +292,7 @@ extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
extern int iscsi_check_assign_cmdsn(struct iscsi_session *,
struct iscsi_nopin *);
extern void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *,
struct iscsi_data *hdr,
int transport_data_cnt);
struct iscsi_data *hdr);
extern int iscsi_conn_send_pdu(struct iscsi_cls_conn *, struct iscsi_hdr *,
char *, uint32_t);
extern int iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment