- 17 Jun, 2024 1 commit
-
-
Kan Liang authored
The unit control address of some CXL units may be wrongly calculated under some configuration on a EMR machine. The current implementation only saves the unit control address of the units from the first die, and the first unit of the rest of dies. Perf assumed that the units from the other dies have the same offset as the first die. So the unit control address of the rest of the units can be calculated. However, the assumption is wrong, especially for the CXL units. Introduce an RB tree for each uncore type to save the unit control address and three kinds of ID information (unit ID, PMU ID, and die ID) for all units. The unit ID is a physical ID of a unit. The PMU ID is a logical ID assigned to a unit. The logical IDs start from 0 and must be contiguous. The physical ID and the logical ID are 1:1 mapping. The units with the same physical ID in different dies share the same PMU. The die ID indicates which die a unit belongs to. The RB tree can be searched by two different keys (unit ID or PMU ID + die ID). During the RB tree setup, the unit ID is used as a key to look up the RB tree. The perf can create/assign a proper PMU ID to the unit. Later, after the RB tree is setup, PMU ID + die ID is used as a key to look up the RB tree to fill the cpumask of a PMU. It's used more frequently, so PMU ID + die ID is compared in the unit_less(). The uncore_find_unit() has to be O(N). But the RB tree setup only occurs once during the driver load time. It should be acceptable. Compared with the current implementation, more space is required to save the information of all units. The extra size should be acceptable. For example, on EMR, there are 221 units at most. For a 2-socket machine, the extra space is ~6KB at most. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20240614134631.1092359-2-kan.liang@linux.intel.com
-
- 18 May, 2024 1 commit
-
-
Uros Bizjak authored
Replace this pattern in events/amd/{un,}core.c: cmpxchg(*ptr, old, new) == old ... with the simpler and faster: try_cmpxchg(*ptr, &old, new) The x86 CMPXCHG instruction returns success in the ZF flag, so this change saves a compare after the CMPXCHG. No functional change intended. Signed-off-by:Uros Bizjak <ubizjak@gmail.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240425101708.5025-1-ubizjak@gmail.com
-
- 08 May, 2024 1 commit
-
-
Ingo Molnar authored
Use of this structure was removed in: 8f2a28c5 ("perf/x86/cstate: Use new probe function") Remove the now stale type as well. Signed-off-by:
-
- 02 May, 2024 11 commits
-
-
Dhananjay Ugwekar authored
AMD CPUs have the scope of RAPL energy-pkg event as package, whereas Intel Cascade Lake CPUs have the scope as die. To account for the difference in the energy-pkg event scope between AMD and Intel CPUs, give more generic and semantically correct names to the maxdie and dieid variables. No functional change. Signed-off-by:
Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com> Signed-off-by:
K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20240502095115.177713-2-Dhananjay.Ugwekar@amd.com
-
Ingo Molnar authored
We are going to fix perf-events fallout of changes in tip:x86/cpu, so merge in that branch first. Signed-off-by: -
Adrian Hunter authored
To support APX functionality, the EVEX prefix is used to: - promote legacy instructions - promote VEX instructions - add new instructions Promoted VEX instructions require no extra annotation because the opcodes do not change and the permissive nature of the instruction decoder already allows them to have an EVEX prefix. Promoted legacy instructions and new instructions are placed in map 4 which has not been used before. Create a new table for map 4 and add APX instructions. Annotate SCALABLE instructions with "(es)" - refer to patch "x86/insn: Add support for APX EVEX to the instruction decoder logic". SCALABLE instructions must be represented in both no-prefix (NP) and 66 prefix forms. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Adrian Hunter authored
Intel Advanced Performance Extensions (APX) extends the EVEX prefix to support: - extended general purpose registers (EGPRs) i.e. r16 to r31 - Push-Pop Acceleration (PPX) hints - new data destination (NDD) register - suppress status flags writes (NF) of common instructions - new instructions Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture Specification for details. The extended EVEX prefix does not need amended instruction decoder logic, except in one area. Some instructions are defined as SCALABLE which means the EVEX.W bit and EVEX.pp bits are used to determine operand size. Specifically, if an instruction is SCALABLE and EVEX.W is zero, then EVEX.pp value 0 (representing no prefix NP) means default operand size, whereas EVEX.pp value 1 (representing 66 prefix) means operand size override i.e. 16 bits Add an attribute (INAT_EVEX_SCALABLE) to identify such instructions, and amend the logic appropriately. Amend the awk script that generates the attribute tables from the opcode map, to recognise "(es)" as attribute INAT_EVEX_SCALABLE. Signed-off-by:
-
Adrian Hunter authored
Support for REX2 has been added to the instruction decoder logic and the awk script that generates the attribute tables from the opcode map. Add REX2 prefix byte (0xD5) to the opcode map. Add annotation (!REX2) for map 0/1 opcodes that are reserved under REX2. Add JMPABS to the opcode map and add annotation (REX2) to identify that it has a mandatory REX2 prefix. A separate opcode attribute table is not needed at this time because JMPABS has the same attribute encoding as the MOV instruction that it shares an opcode with i.e. INAT_MOFFSET. Signed-off-by:
-
Adrian Hunter authored
Intel Advanced Performance Extensions (APX) uses a new 2-byte prefix named REX2 to select extended general purpose registers (EGPRs) i.e. r16 to r31. The REX2 prefix is effectively an extended version of the REX prefix. REX2 and EVEX are also used with PUSH/POP instructions to provide a Push-Pop Acceleration (PPX) hint. With PPX hints, a CPU will attempt to fast-forward register data between matching PUSH and POP instructions. REX2 is valid only with opcodes in maps 0 and 1. Similar extension for other maps is provided by the EVEX prefix, covered in a separate patch. Some opcodes in maps 0 and 1 are reserved under REX2. One of these is used for a new 64-bit absolute direct jump instruction JMPABS. Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture Specification for details. Define a code value for the REX2 prefix (INAT_PFX_REX2), and add attribute flags for opcodes reserved under REX2 (INAT_NO_REX2) and to identify opcodes (only JMPABS) that require a mandatory REX2 prefix (INAT_REX2_VARIANT). Amend logic to read the REX2 prefix and get the opcode attribute for the map number (0 or 1) encoded in the REX2 prefix. Amend the awk script that generates the attribute tables from the opcode map, to recognise "REX2" as attribute INAT_PFX_REX2, and "(!REX2)" as attribute INAT_NO_REX2, and "(REX2)" as attribute INAT_REX2_VARIANT. Signed-off-by:
-
Adrian Hunter authored
The x86 instruction decoder is used not only for decoding kernel instructions. It is also used by perf uprobes (user space probes) and by perf tools Intel Processor Trace decoding. Consequently, it needs to support instructions executed by user space also. Add instructions documented in Intel Architecture Instruction Set Extensions and Future Features Programming Reference March 2024 319433-052, that have not been added yet: AADD AAND AOR AXOR CMPccXADD PBNDKB RDMSRLIST URDMSR UWRMSR VBCSTNEBF162PS VBCSTNESH2PS VCVTNEEBF162PS VCVTNEEPH2PS VCVTNEOBF162PS VCVTNEOPH2PS VCVTNEPS2BF16 VPDPB[SU,UU,SS]D[,S] VPDPW[SU,US,UU]D[,S] VPMADD52HUQ VPMADD52LUQ VSHA512MSG1 VSHA512MSG2 VSHA512RNDS2 VSM3MSG1 VSM3MSG2 VSM3RNDS2 VSM4KEY4 VSM4RNDS4 WRMSRLIST TCMMIMFP16PS TCMMRLFP16PS TDPFP16PS PREFETCHIT1 PREFETCHIT0 Signed-off-by:
-
Adrian Hunter authored
The x86 instruction decoder is used not only for decoding kernel instructions. It is also used by perf uprobes (user space probes) and by perf tools Intel Processor Trace decoding. Consequently, it needs to support instructions executed by user space also. Intel Architecture Instruction Set Extensions and Future Features manual number 319433-044 of May 2021, documented VEX versions of instructions VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS, but the opcode map has them listed as EVEX only. Remove EVEX-only (ev) annotation from instructions VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS, which allows them to be decoded with either a VEX or EVEX prefix. Fixes: 0153d98f ("x86/insn: Add misc instructions to x86 instruction decoder") Signed-off-by:
-
Adrian Hunter authored
The x86 instruction decoder is used not only for decoding kernel instructions. It is also used by perf uprobes (user space probes) and by perf tools Intel Processor Trace decoding. Consequently, it needs to support instructions executed by user space also. Opcode 0x68 PUSH instruction is currently defined as 64-bit operand size only i.e. (d64). That was based on Intel SDM Opcode Map. However that is contradicted by the Instruction Set Reference section for PUSH in the same manual. Remove 64-bit operand size only annotation from opcode 0x68 PUSH instruction. Example: $ cat pushw.s .global _start .text _start: pushw $0x1234 mov $0x1,%eax # system call number (sys_exit) int $0x80 $ as -o pushw.o pushw.s $ ld -s -o pushw pushw.o $ objdump -d pushw | tail -4 0000000000401000 <.text>: 401000: 66 68 34 12 pushw $0x1234 401004: b8 01 00 00 00 mov $0x1,%eax 401009: cd 80 int $0x80 $ perf record -e intel_pt//u ./pushw [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data ] Before: $ perf script --insn-trace=disasm Warning: 1 instruction trace errors pushw 10349 [000] 10586.869237014: 401000 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) pushw $0x1234 pushw 10349 [000] 10586.869237014: 401006 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %al, (%rax) pushw 10349 [000] 10586.869237014: 401008 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %cl, %ch pushw 10349 [000] 10586.869237014: 40100a [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb $0x2e, (%rax) instruction trace error type 1 time 10586.869237224 cpu 0 pid 10349 tid 10349 ip 0x40100d code 6: Trace doesn't match instruction After: $ perf script --insn-trace=disasm pushw 10349 [000] 10586.869237014: 401000 [unknown] (./pushw) pushw $0x1234 pushw 10349 [000] 10586.869237014: 401004 [unknown] (./pushw) movl $1, %eax Fixes: eb13296c ("x86: Instruction decoder API") Signed-off-by: -
Chang S. Bae authored
The x86 instruction decoder needs to know these new instructions that are going to be used in the crypto library as well as the x86 core code. Add the following: LOADIWKEY: Load a CPU-internal wrapping key. ENCODEKEY128: Wrap a 128-bit AES key to a key handle. ENCODEKEY256: Wrap a 256-bit AES key to a key handle. AESENC128KL: Encrypt a 128-bit block of data using a 128-bit AES key indicated by a key handle. AESENC256KL: Encrypt a 128-bit block of data using a 256-bit AES key indicated by a key handle. AESDEC128KL: Decrypt a 128-bit block of data using a 128-bit AES key indicated by a key handle. AESDEC256KL: Decrypt a 128-bit block of data using a 256-bit AES key indicated by a key handle. AESENCWIDE128KL: Encrypt 8 128-bit blocks of data using a 128-bit AES key indicated by a key handle. AESENCWIDE256KL: Encrypt 8 128-bit blocks of data using a 256-bit AES key indicated by a key handle. AESDECWIDE128KL: Decrypt 8 128-bit blocks of data using a 128-bit AES key indicated by a key handle. AESDECWIDE256KL: Decrypt 8 128-bit blocks of data using a 256-bit AES key indicated by a key handle. The detail can be found in Intel Software Developer Manual. Signed-off-by:
Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20240502105853.5338-2-adrian.hunter@intel.com
-
Ingo Molnar authored
Signed-off-by:
-
- 29 Apr, 2024 13 commits
-
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ dhansen: vertically align 0's in invlpg_miss_ids[] ] Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/all/20240424181518.41946-1-tony.luck%40intel.com
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ dhansen: vertically align macro and remove stray subject / ] Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ bp: Squash two resctrl patches into one. ] Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ bp: Squash *three* mce patches into one, fold in fix: https://lore.kernel.org/r/20240429022051.63360-1-tony.luck@intel.com ] Signed-off-by: -
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ bp: Squash *three* uncore patches into one. ] Signed-off-by:
-
- 28 Apr, 2024 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: - Fix EEVDF corner cases - Fix two nohz_full= related bugs that can cause boot crashes and warnings * tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU sched/isolation: Prevent boot crash when the boot CPU is nohz_full sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr sched/eevdf: Always update V if se->on_rq when reweighting
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: - Make the CPU_MITIGATIONS=n interaction with conflicting mitigation-enabling boot parameters a bit saner. - Re-enable CPU mitigations by default on non-x86 - Fix TDX shared bit propagation on mprotect() - Fix potential show_regs() system hang when PKE initialization is not fully finished yet. - Add the 0x10-0x1f model IDs to the Zen5 range - Harden #VC instruction emulation some more * tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n cpu: Re-enable CPU mitigations by default for !X86 architectures x86/tdx: Preserve shared bit on mprotect() x86/cpu: Fix check for RDPKRU in __show_regs() x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Ingo Molnar: "Fix a double free bug in the init error path of the GICv3 irqchip driver" * tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Prevent double free on error
-
Oleg Nesterov authored
housekeeping_setup() checks cpumask_intersects(present, online) to ensure that the kernel will have at least one housekeeping CPU after smp_init(), but this doesn't work if the maxcpus= kernel parameter limits the number of processors available after bootup. For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at boot time on a virtual machine with 4 CPUs. Change housekeeping_setup() to use cpumask_first_and() and check that the returned CPU number is valid and less than setup_max_cpus. Another corner case is "nohz_full=0" on a machine with a single CPU or with the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the WARN_ON(tick_nohz_full_running) in tick_sched_do_timer(). And how should the kernel interpret the "nohz_full=" parameter? It should be silently ignored, but currently cpulist_parse() happily returns the empty cpumask and this leads to the same problem. Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask) and do nothing in this case. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Phil Auld <pauld@redhat.com> Acked-by:
Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
-
Oleg Nesterov authored
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not include the boot CPU, which is no longer true after: 08ae95f4 ("nohz_full: Allow the boot CPU to be nohz_full"). However after: aae17ebb ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work") the kernel will crash at boot time in this case; housekeeping_any_cpu() returns an invalid CPU number until smp_init() brings the first housekeeping CPU up. Change housekeeping_any_cpu() to check the result of cpumask_any_and() and return smp_processor_id() in this case. This is just the simple and backportable workaround which fixes the symptom, but smp_processor_id() at boot time should be safe at least for type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu logic. There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to offline tick_do_timer_cpu (the 1st online housekeeping CPU). Fixes: aae17ebb ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work") Reported-by:
Chris von Recklinghausen <crecklin@redhat.com> Signed-off-by:
-
- 27 Apr, 2024 7 commits
-
-
https://github.com/Rust-for-Linux/linuxLinus Torvalds authored
Pull Rust fixes from Miguel Ojeda: - Soundness: make internal functions generated by the 'module!' macro inaccessible, do not implement 'Zeroable' for 'Infallible' and require 'Send' for the 'Module' trait. - Build: avoid errors with "empty" files and workaround 'rustdoc' ICE. - Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'. - Code docs: remove non-existing key from 'module!' macro example. - Docs: trivial rendering fix in arch table. * tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux: rust: remove `params` from `module` macro example kbuild: rust: force `alloc` extern to allow "empty" Rust files kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE rust: kernel: require `Send` for `Module` implementations rust: phy: implement `Send` for `Registration` rust: make mutually exclusive with CFI_CLANG rust: macros: fix soundness issue in `module!` macro rust: init: remove impl Zeroable for Infallible docs: rust: fix improper rendering in Arch Support page rust: don't select CONSTRUCTORS
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel separation - A fix to avoid loading rv64/NOMMU kernel past the start of RAM - A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer overflow in the bitmask - The sud_test kselftest has been fixed to properly swizzle the syscall number into the return register, which are not the same on RISC-V - A fix for a build warning in the perf tools on rv32 - A fix for the CBO selftests, to avoid non-constants leaking into the inline asm - A pair of fixes for T-Head PBMT errata probing, which has been renamed MAE by the vendor * tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2 perf riscv: Fix the warning due to the incompatible type riscv: T-Head: Test availability bit before enabling MAE errata riscv: thead: Rename T-Head PBMT to MAE selftests: sud_test: return correct emulated syscall value on RISC-V riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN riscv: Fix loading 64-bit NOMMU kernels past the start of RAM riscv: Fix TASK_SIZE on 64-bit NOMMU
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Three smb3 client fixes, all also for stable: - two small locking fixes spotted by Coverity - FILE_ALL_INFO and network_open_info packing fix" * tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: fix lock ordering potential deadlock in cifs_sync_mid_result smb3: missing lock when picking channel smb: client: Fix struct_group() usage in __packed structs
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Fix a race condition in the at24 eeprom handler, a NULL pointer exception in the I2C core for controllers only using target modes, drop a MAINTAINERS entry, and fix an incorrect DT binding for at24" * tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: smbus: fix NULL function pointer dereference MAINTAINERS: Drop entry for PCA9541 bus master selector eeprom: at24: fix memory corruption race condition dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
-
Tetsuo Handa authored
create_prof_cpu_mask() is no longer used after commit 1f44a225 ("s390: convert interrupt handling to use generic hardirq"). Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwireLinus Torvalds authored
Pull soundwire fix from Vinod Koul: - Single AMD driver fix for wake interrupt handling in clockstop mode * tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: amd: fix for wake interrupt handling for clockstop mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: - Revert pl330 issue_pending waits until WFP state due to regression reported in Bluetooth loading - Xilinx driver fixes for synchronization, buffer offsets, locking and kdoc - idxd fixes for spinlock and preventing the migration of the perf context to an invalid target - idma driver fix for interrupt handling when powered off - Tegra driver residual calculation fix - Owl driver register access fix * tag 'dmaengine-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: idxd: Fix oops during rmmod on single-CPU platforms dmaengine: xilinx: xdma: Clarify kdoc in XDMA driver dmaengine: xilinx: xdma: Fix synchronization issue dmaengine: xilinx: xdma: Fix wrong offsets in the buffers addresses in dma descriptor dma: xilinx_dpdma: Fix locking dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue idma64: Don't try to serve interrupts when device is powered off dmaengine: tegra186: Fix residual calculation dmaengine: owl: fix register access functions dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"
-
