- 12 Jan, 2008 40 commits
-
-
James Bottomley authored
The current scsi_test_unit_ready() is updated to return sense code information (in struct scsi_sense_hdr). The sd and sr drivers are changed to interpret the sense code return asc 0x3a as no media and adjust the device status accordingly. Signed-off-by:James Bottomley <James.Bottomley@HansenPartnership.com>
-
Rusty Russell authored
If blk_rq_map_sg wrote more than was allocated in the scatterlist, BUG_ON() is probably the right thing to do. [jejb: rejections fixed up] Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Acked-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Fix scsi_tgt_lib build when dprintk is defined: Also fix accessors problem when dprintk is defined drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_cmd_destroy': drivers/scsi/scsi_tgt_lib.c:183: warning: format '%lu' expects type 'long unsigned int', but argument 6 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_cmd_done': drivers/scsi/scsi_tgt_lib.c:330: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_transfer_response': drivers/scsi/scsi_tgt_lib.c:345: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_init_cmd': drivers/scsi/scsi_tgt_lib.c:368: warning: format '%lu' expects type 'long unsigned int', but argument 6 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_kspace_exec': drivers/scsi/scsi_tgt_lib.c:499: warning: format '%lu' expects type 'long unsigned int', but argument 9 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_kspace_it_nexus_rsp': drivers/scsi/scsi_tgt_lib.c:620: error: 'mid' undeclared (first use in this function) drivers/scsi/scsi_tgt_lib.c:620: error: (Each undeclared identifier is reported only once drivers/scsi/scsi_tgt_lib.c:620: error: for each function it appears in.) make[2]: *** [drivers/scsi/scsi_tgt_lib.o] Error 1 [tomo: > - dprintk("%d %d %llx\n", host_no, result, (unsigned long long) mid); > + dprintk("%d %d\n", host_no, result); 'mid' is a typo. I wanted to do: dprintk("%d %d %llx\n", host_no, result, (unsigned long long)itn_id); The rest looks ok. Thanks, ] Signed-off-by:Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Acked-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
Christoph Hellwig authored
On Wed, Nov 07, 2007 at 01:51:44PM -0500, Salyzyn, Mark wrote: > Christoph Hellwig [mailto:hch@infradead.org] sez: > > Did anyone run the driver through sparse to see if we have > > more issues like this? > > There are some warnings from sparse, none like this one. I will deal > with the warnings ... Actually there are a lot of endianess warnings, fortunately most of them harmless. The patch below fixes all of them up (including the ones in the patch I replied to), except for aac_init_adapter which is really odd and I don't know what to do. [jejb fixed up rejections and checkpatch issues] Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Shyam Sundar authored
Drivers do SCRs for each Vport. When something changes in the fabric, firmware generates one interrupt for each RSCN. Based on the current implementation, in each case, we make recursive calls to handle RSCN for physical and each subsequent virtual ports. The fix is to also take into consideration the vp_idx, which is set by the firmware to indicate the vport the RSCN was meant for. Signed-off-by:
-
Andrew Vasquez authored
Firmware will export to software the maximum number of vports supported for any given firmware version and ISP type. Use this information rather than the current hardcoding of limitations within the driver. Signed-off-by:
-
Andrew Vasquez authored
Callers of qla2x00_async_event() already populate the mb[] array upon invocation, doing so via the appropriate mailbox register accessors. The stale codes removed are leftover-bits kept during the FWI2 transition. Though relatively benign, the extra-reads are not valid for FWI2 boards (ISP24xx and above) and peek into the incorrect regions of registers. Signed-off-by:
-
Robert Jennings authored
CRQ send errors that return with H_CLOSED should return with SCSI_MLQUEUE_HOST_BUSY until firmware alerts the client of a CRQ transport event. The transport event will either reinitialize and requeue the requests or fail and return IO with DID_ERROR. To avoid failing the eh_* functions while re-attaching to the server adapter this will retry for a period of time while ibmvscsi_send_srp_event returns SCSI_MLQUEUE_HOST_BUSY. In ibmvscsi_eh_abort_handler() the loop includes the search of the event list. The lock on the hostdata is dropped while waiting to try again after failing ibmvscsi_send_srp_event. The event could have been purged if a login was in progress when the function was called. In ibmvscsi_eh_device_reset_handler() the loop includes the call to get_event_struct() because a failing call to ibmvscsi_send_srp_event() will have freed the event struct. Signed-off-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Randy Dunlap authored
- Change title to remove "Mid-Layer" since the doc is about all of the SCSI layers. - Use "SCSI" instead of "scsi" in docbook text. - Use "*/" to end kernel-doc notation blocks. - A few other minor typo fixes. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Use correct function name in kernel-doc. Signed-off-by:
-
Randy Dunlap authored
Minor corrections and additions to 'scsi_logging_level', as pointed out by Chuck Ebbert. Also point out the IBM S390-tools 'scsi_logging_level' script. Signed-off-by:
-
Tony Battersby authored
Some SCSI tape medium changers that need the BLIST_SINGLELUN flag have the medium changer at one LUN and the tape drive at a different LUN. The inquiry string of the tape drive may be different from that of the medium changer. In order for single_lun to be effective, every scsi_device under a given scsi_target must have it set. This means that there needs to be a blacklist entry for BOTH the medium changer AND the tape drive, which is impractical because some medium changers may be paired with a variety of different tape drive models. It makes more sense to put the single_lun flag in scsi_target instead of scsi_device, which causes every device at a given target ID to inherit the single_lun flag from one LUN. This makes it possible to blacklist just the medium changer and not the tape drive. Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
-
bo yang authored
Update version and changelog Signed-off-by:
Bo Yang <bo.yang@lsi.com> Signed-off-by:
-
bo yang authored
Added module parameter "poll_mode_io" to support for "polling" (reduced interrupt operation). In this mode, IO completion interrupts are delayed. At the end of initiating IOs, the driver schedules for cmd completion if there are pending cmds. A timer-based interrupt has also been added to prevent IO completion from being delayed indefinitely in the case that no new IOs are initiated. Some formatting issues in resume, suspend comment block also corrected Signed-off-by:
-
bo yang authored
Driver will call cmd completion routine from Reset path without waiting for cmd completion from isr context. Signed-off-by:
-
bo yang authored
MegaRAID utilities expect sense_buff to be of type unsigned long. Signed-off-by:
-
bo yang authored
1. Setting the max_sectors_per_req based on max SGL supported by the FW. Prior versions calculated this value from controller info's max_sectors_1, max_sectors_2. For certain controllers/FW, this was resulting in a value greater than max SGL supported by the FW. Now we take the min of max sgl from FW and max_sectors calculation. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take a max of 60 seconds to respond to the INIT cmd. Signed-off-by:
-
bo yang authored
Adding hibernation support. suspend, resume routine implemented. Signed-off-by:
-
Tony Battersby authored
The 3ware 9500S-8 SATA RAID controller exhibits terrible write performance when PCI memory-write-and-invalidate is disabled. This is easy to demonstrate by replacing pci_try_set_mwi() in the patch below with pci_clear_mwi(). My benchmarks show the following: MWI disabled: 15 MB/s write, 330 MB/s read MWI enabled: 240 MB/s write, 330 MB/s read Most motherboards will enable MWI without the driver having to set it explicitly, so most people probably wouldn't encounter this problem. For the few motherboards that don't enable it, this patch could give a 16x performance improvement for writing. This issue does not seem to affect the 9550SX controller, but the patch doesn't hurt it either. I haven't tested any of the other 3ware controllers. Signed-off-by:
adam radford <aradford@gmail.com> Signed-off-by:
-
Darrick J. Wong authored
Annotate sas_queuecommand with locking details, and clean up a few more sparse warnings about static/non-static declarations. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
Darrick J. Wong authored
sparse complains about the mixing of enums in libsas. Since the underlying numeric values of both enums are the same, combine them to get rid of the warning. Signed-off-by:
-
Matthias Kaehlcke authored
Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by:
-
Boaz Harrosh authored
- convert to accessors and !use_sg cleanup - Not ready for sg-chaining Signed-off-by:
-
Boaz Harrosh authored
- convert to accessors and !use_sg cleanup Signed-off-by:
-
James Bottomley authored
Signed-off-by: -
Rob Landley authored
Add Documentation/DocBook/scsi_midlayer.tmpl, add to Makefile, and update lots of kerneldoc comments in drivers/scsi/*. Updated with comments from Stefan Richter, Stephen M. Cameron, James Bottomley and Randy Dunlap. Signed-off-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Christof Schmitt authored
Remove tracing for request with a "qualifier" field set in the response. The protocol status qualifier now contains measurement data for "good" commands, so this check would trace every response by default. The fix is to simply remove the "qual" tracing: The responses with an interesting status are also traced as "ferr" or "perr" and all responses can be traced as "norm" with a higher trace level. Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Christof Schmitt authored
When adding an invalid LUN, there is a deadlock between the add via scsi_scan_target and the slave_destroy handler: The handler waits for the scan to complete, but for an invalid unit, scsi_scan_target directly calls the slave_destroy handler. Fix the deadlock by removing the wait in the slave_destroy handler, it was not necessary anyway. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
The common I/O layer can call remove a handler to inform zfcp that a device disappeared. The handler zfcp_ccw_remove then removes all unit, port and the adapter data structures. Removing the units requires that the SCSI devices are removed first. Signed-off-by:
-
Christof Schmitt authored
It is not necessary to use jiffies or milliseconds to specify waiting times that last a couple of seconds. Signed-off-by:
-
Christof Schmitt authored
Signed-off-by:
-
Christof Schmitt authored
The callback function used by zfcp always returns success, which is an indication for the SCSI midlayer to stop error handling. Remove the bus_reset callback, since the same function will be called via the host_reset callback. Signed-off-by:
-
Salyzyn, Mark authored
Some of our vendors have requested that our adapters ignore the hardware reset attempts during recovery and have enforced this with changes in Adapter Firmware. Some of our customers have requested the option to be able to reset the adapter under adverse adapter failure, we even had a few defects reported here considering it a regression that the Adapter could not be reset. This patch addresses this dichotomy. The user can force the adapter to be reset if it supports the IOP_RESET_ALWAYS command, in cases where the adapter has been programmed to ignore the reset, by setting the aacraid.check_reset parameter to a value of -1. The driver will not reset an Adapter that does not support the reset command(s). This patch also fixes and cleans up some of the logic associated with resetting the adapter. Signed-off-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
-
Boaz Harrosh authored
- This patch depends on: NCR5380: Use scsi_eh API for REQUEST_SENSE invocation - convert to accessors and !use_sg cleanup - FIXME: Not sg-chain ready look for ++cmd->SCp.buffer Signed-off-by: -
Boaz Harrosh authored
- code used to set sg_tablesize to zero for board revision less than 6. This is no longer supported, therefore I use sg_tablesize=1 and open code the sg handling for that case. - Get rid of use of SG_NONE which will be removed soon. Signed-off-by: -
Boaz Harrosh authored
- convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by:
Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by:
-
Boaz Harrosh authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by:Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Boaz Harrosh authored
- This patch should be commited before: usb: transport - convert to accessors and !use_sg code path removal - isd200_action() was still using direct liniar pointers in issuing commands to the USB transport level. This is no longer supported, use one-element scatterlist instead. - Adjustment of command's length in the case of scsi-to-ata translation is now restored before return to queuecommand, since other wise it can leak BIOs. - isd200_action() return Error on unknown requests. Used to print an error but still try to send garbage cdb. - convert few places to scsi data accessors. - Todo: This file will need to be changed when scsi_cmnd changes to scsi_data_buffer or any other solution. Signed-off-by:Matthew Dharm <mdharm-scsi@one-eyed-alien.net> Signed-off-by:
-
Boaz Harrosh authored
- This patch depends on: usb: transport.c use scsi_eh API in REQUEST_SENSE execution - Use scsi data accessors and remove of !use_sg code path. - New usb_stor_bulk_srb() for use by drivers [jejb: updated with corrective fix. had a bug in residual handling in the new usb_stor_bulk_srb() function. Found by Gabriel C. in -mm tree. Tested-by:Gabriel C <nix.or.die@googlemail.com> ] Signed-off-by:
-
