- 04 Mar, 2016 2 commits
-
-
Doug Ledford authored
These three related functions can't agree whether to put the umrwr on the stack dirty and then memset it, or to initialize it on the stack. Make them all agree. Signed-off-by:Doug Ledford <dledford@redhat.com>
-
Christoph Hellwig authored
Simplifies the code, and makes it more fair vs other users by using a softirq for polling. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Haggai Eran <haggaie@mellanox.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
- 01 Mar, 2016 21 commits
-
-
Matan Barak authored
This patch adds user-space support for memory windows allocation and deallocation. It also exposes the supported types via query_device_caps verb. Signed-off-by:
Matan Barak <matanb@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Tested-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Matan Barak authored
Passing udata to the vendor's driver in order to pass data from the user-space driver to the kernel-space driver. This data will be used in downstream patches. Signed-off-by:
-
Matan Barak authored
Mlx5's mkey mechanism is also used for memory windows. The current code base uses MR (memory region) naming, which is inaccurate. Changing MR to mkey in order to represent its different usages more accurately. Signed-off-by:
-
Noa Osherovich authored
This patch adds support for re-registration of memory regions in MLX5. The functionality is basically the same as deregister followed by register, but attempts to reuse the existing resources as much as possible. Original memory keys are kept if possible, saving the need to communicate new ones to remote peers. Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Reviewed-by:
-
Noa Osherovich authored
In order to add re-registration of memory region, some logic was extracted to separate functions: - ODP related logic. - Some of the UMR WQE preparation code. - DMA mapping. - Umem creation. - Creating MKey using FW interface. - MR fields assignments after successful creation. Signed-off-by:
-
Haggai Eran authored
Commit 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") added checks for incoming RDMA CM requests that they can be matched to a netdev based on the P_Key in the BTH of the request. This behavior was reverted in commit ab3964ad ("IB/cma: Use inner P_Key to determine netdev"), since the mlx5 and ipath drivers didn't send the correct value in the BTH P_Key. Since the ipath driver was removed, and the mlx5 driver can now send GSI packets on different P_Keys, we could revert the patch to let the rdma_cm module look on the BTH P_Key when deciding to what netdev a packet belongs. However, that still breaks compatibility with the older drivers. Change the behavior to print a warning when receiving a request that has a different BTH P_Key and inner payload P_Key. In the future, after users have seen the warnings and upgraded their setups, remove the warning and block these requests. Signed-off-by:
-
Haggai Eran authored
Now that the transmission of GSI MADs is done with the special transmission QPs, eliminate the send buffers in the GSI receive QP. Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Haggai Eran authored
Pick the QP to use according to the wr.ud.pkey_index field in the work request. If the QP doesn't exist, it means the P_Key is zero and the packet would have been dropped, so just generate a completion and move on. Reviewed-by:
-
Haggai Eran authored
The emulated GSI QP's send completions are generated by multiple hardware QPs, so their completions could arrive out of order with respect to the order their work request were submitted. Reorder the completions by keeping a list of the posted work request and their completions. A newly received completion from the hardware updates the list and marks its work request as completed. However, the completions are only reported to the client according to the list order. In order to support that, create a new private CQ to handle the hardware completions. Signed-off-by:
-
Haggai Eran authored
The GSI QP emulation requires also emulating completions for transmitted MADs. The CQ on which these completions are generated can also be used by the hardware, and the MAD layer is free to use any CQ of the device for the GSI QP. Add a method for generating software completions to each mlx5 CQ. Software completions are polled first, and generate calls to the completion handler callback if necessary. Reviewed-by:
-
Haggai Eran authored
Whenever the P_Key table is changed, we create the required GSI transmission QPs on-demand. Reviewed-by:
-
Haggai Eran authored
In order to send GSI MADs on different P_Keys, mlx5 needs different QPs to be created, each with a different P_Key set when the QP is modified to the INIT state. Create QPs for each non-zero P_Key in the P_Key table. Signed-off-by:
-
Haggai Eran authored
mlx5 creates special GSI QPs that has limited ability to control the P_Key of transmitted packets. The sent P_Key is taken from the QP object, similarly to what happens with regular UD QPs. Create a software wrapper around GSI QPs that with the following patches will be able to emulate the functionality of a GSI QP including control of the P_Key per work request. Reviewed-by:
-
Haggai Eran authored
Add debugging prints to the modify QP verb to help understand the cause a returned error. Reviewed-by:
-
Haggai Eran authored
In order to create multiple GSI QPs, we need to set the source QP number to one on all these QPs. Add the necessary definitions and infrastructure to do that. Reviewed-by:
-
Erez Shitrit authored
The driver checks the csum from the HW when completion arrived and marks it in the wc->wc_flags field for the ulp drivers. These is for packets from type IB_WC_RECV only. Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by:
-
Erez Shitrit authored
In order to support LSO and CSUM in the TX flow the driver does the following: * LSO bit for the enum mlx5_ib_qp_flags was added, indicates QP that supports LSO offloads. * Enables the special offload when the QP is created, and enable the special work request id (IB_WR_LSO) when comes. * Calculates the size of the WQE according to the new WQE format that support these offloads. * Handles the new WQE format when arrived, sets the relevant fields, and copies the needed data. Signed-off-by:
-
Erez Shitrit authored
The HW can supply several offloads for UD QP, added offloads for checksumming for both TX and RX and LSO for TX. Two new bits were added in order to expose and enable these offloads: 1. HCA capability bit: declares the support for IPoIB basic offloads. 2. QPC bit which will be used in the QP creation flow, which set these abilities in the QP. Signed-off-by:
-
Meny Yossefi authored
Modify mlx5_ib_process_mad to use PPCNT and query_vport commands instead of MAD_IFC, as MAD_IFC is deprecated on new firmware versions (and doesn't support RoCE anyway). Traffic counters exist in both 32-bit and 64-bit forms. Declaring support of extended coutners results in traffic counters to be read in their 64-bit form only via the query_vport command. Error counters exist only in 32-bit form and read via PPCNT command. This commit also adds counters support in RoCE. Signed-off-by:
Meny Yossefi <menyy@mellanox.com> Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
-
Meny Yossefi authored
Added helper function to read IB standard error counters via the PPCNT register. The PPCNT register read command provides the 32-bit error counters of both IB/RoCE link layer and transport layer. Signed-off-by:
-
Meny Yossefi authored
Added helper function to read 64bit virtual port Infiniband traffic counters. Signed-off-by:
-
- 28 Feb, 2016 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A rather largish series of 12 patches addressing a maze of race conditions in the perf core code from Peter Zijlstra" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Robustify task_function_call() perf: Fix scaling vs. perf_install_in_context() perf: Fix scaling vs. perf_event_enable() perf: Fix scaling vs. perf_event_enable_on_exec() perf: Fix ctx time tracking by introducing EVENT_TIME perf: Cure event->pending_disable race perf: Fix race between event install and jump_labels perf: Fix cloning perf: Only update context time when active perf: Allow perf_release() with !event->ctx perf: Do not double free perf: Close install vs. exit race
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "This update contains: - Hopefully the last ASM CLAC fixups - A fix for the Quark family related to the IMR lock which makes kexec work again - A off-by-one fix in the MPX code. Ironic, isn't it? - A fix for X86_PAE which addresses once more an unsigned long vs phys_addr_t hickup" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mpx: Fix off-by-one comparison with nr_registers x86/mm: Fix slow_virt_to_phys() for X86_PAE again x86/entry/compat: Add missing CLAC to entry_INT80_32 x86/entry/32: Add an ASM_CLAC to entry_SYSENTER_32 x86/platform/intel/quark: Change the kernel's IMR lock bit to false -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixlet from Thomas Gleixner: "A trivial printk typo fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix trivial typo in printk() message
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Four small fixes for irqchip drivers: - Add missing low level irq handler initialization on mxs, so interrupts can acutally be delivered - Add a missing barrier to the GIC driver - Two fixes for the GIC-V3-ITS driver, addressing a double EOI write and a cache flush beyond the actual region" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Add missing barrier to 32bit version of gic_read_iar() irqchip/mxs: Add missing set_handle_irq() irqchip/gicv3-its: Avoid cache flush beyond ITS_BASERn memory size irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1 -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/android fix from Greg KH: "Here is one patch, for the android binder driver, to resolve a reported problem. Turns out it has been around for a while (since 3.15), so it is good to finally get it resolved. It has been in linux-next for a while with no reported issues" * tag 'staging-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a few USB fixes for 4.5-rc6 They fix a reported bug for some USB 3 devices by reverting the recent patch, a MAINTAINERS change for some drivers, some new device ids, and of course, the usual bunch of USB gadget driver fixes. All have been in linux-next for a while with no reported issues" * tag 'usb-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: MAINTAINERS: drop OMAP USB and MUSB maintainership usb: musb: fix DMA for host mode usb: phy: msm: Trigger USB state detection work in DRD mode usb: gadget: net2280: fix endpoint max packet for super speed connections usb: gadget: gadgetfs: unregister gadget only if it got successfully registered usb: gadget: remove driver from pending list on probe error Revert "usb: hub: do not clear BOS field during reset device" usb: chipidea: fix return value check in ci_hdrc_pci_probe() usb: chipidea: error on overflow for port_test_write USB: option: add "4G LTE usb-modem U901" USB: cp210x: add IDs for GE B650V3 and B850V3 boards USB: option: add support for SIM7100E usb: musb: Fix DMA desired mode for Mentor DMA engine usb: gadget: fsl_qe_udc: fix IS_ERR_VALUE usage usb: dwc2: USB_DWC2 should depend on HAS_DMA usb: dwc2: host: fix the data toggle error in full speed descriptor dma usb: dwc2: host: fix logical omissions in dwc2_process_non_isoc_desc usb: dwc3: Fix assignment of EP transfer resources usb: dwc2: Add extra delay when forcing dr_mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_last(): ELOOP failure exit should be done after leaving RCU mode should_follow_link(): validate ->d_seq after having decided to follow namei: ->d_inode of a pinned dentry is stable only for positives do_last(): don't let a bogus return value from ->open() et.al. to confuse us fs: return -EOPNOTSUPP if clone is not supported hpfs: don't truncate the file when delete fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "We didn't have a batch last week, so this one is slightly larger. None of them are scary though, a handful of fixes for small DT pieces, replacing properties with newer conventions. Highlights: - N900 fix for setting system revision - onenand init fix to avoid filesystem corruption - Clock fix for audio on Beaglebone-x15 - Fixes on shmobile to deal with CONFIG_DEBUG_RODATA (default y in 4.6) + misc smaller stuff" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Extend info, add wiki and ml for meson arch MAINTAINERS: alpine: add a new maintainer and update the entry ARM: at91/dt: fix typo in sama5d2 pinmux descriptions ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption Revert "regulator: tps65217: remove tps65217.dtsi file" ARM: shmobile: Remove shmobile_boot_arg ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Move shmobile_scu_base from .text to .bss ARM: OMAP2+: Fix omap_device for module reload on PM runtime forbid ARM: OMAP2+: Improve omap_device error for driver writers ARM: DTS: am57xx-beagle-x15: Select SYS_CLK2 for audio clocks ARM: dts: am335x/am57xx: replace gpio-key,wakeup with wakeup-source property ARM: OMAP2+: Set system_rev from ATAGS for n900 ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl ARM: dts: kirkwood: use unique machine name for ds112 ARM: dts: imx6: remove bogus interrupt-parent from CAAM node
-
Al Viro authored
... or we risk seeing a bogus value of d_is_symlink() there. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... otherwise d_is_symlink() above might have nothing to do with the inode value we've got. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: -
Al Viro authored
both do_last() and walk_component() risk picking a NULL inode out of dentry about to become positive, *then* checking its flags and seeing that it's not negative anymore and using (already stale by then) value they'd fetched earlier. Usually ends up oopsing soon after that... Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: -
Al Viro authored
... into returning a positive to path_openat(), which would interpret that as "symlink had been encountered" and proceed to corrupt memory, etc. It can only happen due to a bug in some ->open() instance or in some LSM hook, etc., so we report any such event *and* make sure it doesn't trick us into further unpleasantness. Cc: stable@vger.kernel.org # v3.6+, at least Signed-off-by: -
Christoph Hellwig authored
-EBADF is a rather confusing error if an operations is not supported, and nfsd gets rather upset about it. Signed-off-by:
-
Mikulas Patocka authored
The delete opration can allocate additional space on the HPFS filesystem due to btree split. The HPFS driver checks in advance if there is available space, so that it won't corrupt the btree if we run out of space during splitting. If there is not enough available space, the HPFS driver attempted to truncate the file, but this results in a deadlock since the commit 7dd29d8d ("HPFS: Introduce a global mutex and lock it on every callback from VFS"). This patch removes the code that tries to truncate the file and -ENOSPC is returned instead. If the user hits -ENOSPC on delete, he should try to delete other files (that are stored in a leaf btree node), so that the delete operation will make some space for deleting the file stored in non-leaf btree node. Reported-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by:
-
- 27 Feb, 2016 2 commits
-
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dax: move writeback calls into the filesystems dax: give DAX clearing code correct bdev ext4: online defrag not supported with DAX ext2, ext4: only set S_DAX for regular inodes block: disable block device DAX by default ocfs2: unlock inode if deleting inode from orphan fails mm: ASLR: use get_random_long() drivers: char: random: add get_random_long() mm: numa: quickly fail allocations for NUMA balancing on full nodes mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext2/4 DAX fix from Ted Ts'o: "This fixes a file system corruption bug with DAX" * tag 'tags/ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext2, ext4: fix issue with missing journal entry in ext4_dax_mkwrite()
-
