Skip to content

L
linux
Switch branch/tag
  1. 27 Nov, 2018 18 commits
    • Uros Bizjak's avatar
      KVM/nVMX: Remove unneeded forward jump in nested_vmx_check_vmentry_hw asm · 00df9181
      Uros Bizjak authored 
      There is no need to jump just after the jump insn itself. Also, make
code similar to entering guest mode in vmx_vcpu_run.
Signed-off-by: default avatarUros Bizjak <ubizjak@gmail.com>
Reviewed-by: default avatarJim Mattson <jmattson@google.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      00df9181
    • Jim Mattson's avatar
      KVM: nVMX: Unrestricted guest mode requires EPT · 88656040
      Jim Mattson authored 
      As specified in Intel's SDM, do not allow the L1 hypervisor to launch
an L2 guest with the VM-execution controls for "unrestricted guest" or
"mode-based execute control for EPT" set and the VM-execution control
for "enable EPT" clear.

Note that the VM-execution control for "mode-based execute control for
EPT" is not yet virtualized by kvm.
Reported-by: default avatarAndrew Thornton <andrewth@google.com>
Signed-off-by: default avatarJim Mattson <jmattson@google.com>
Reviewed-by: default avatarPeter Shier <pshier@google.com>
Reviewed-by: default avatarSean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: default avatarWanpeng Li <wanpengli@tencent.com>
Reviewed-by: default avatarLiran Alon <liran.alon@oracle.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      88656040
    • Stefan Raspl's avatar
      tools/kvm_stat: switch to python3 · 09f70c3b
      Stefan Raspl authored 
      The current shebang does not work in environments that only support python3
and have no python2 installed. Plus there does not seem to be a way to
support python2 and python3 at the same time. Since all known python3 issues
were fixed, and as python3 is the way to go, let's switch over.
Note that the code is still python2 compliant, so folks in bad use can
simply revert the shebang.
Suggested-by: default avatarChristian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: default avatarStefan Raspl <raspl@linux.ibm.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      09f70c3b
    • Paolo Bonzini's avatar
      KVM: x86: Trace changes to active TSC offset regardless if vCPU in guest-mode · 45c3af97
      Paolo Bonzini authored 
      For some reason, kvm_x86_ops->write_l1_tsc_offset() skipped trace
of change to active TSC offset in case vCPU is in guest-mode.
This patch changes write_l1_tsc_offset() behavior to trace any change
to active TSC offset to aid debugging.  The VMX code is changed to
look more similar to SVM, which is in my opinion nicer.

Based on a patch by Liran Alon.
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      45c3af97
    • Jim Mattson's avatar
      kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcb · fd65d314
      Jim Mattson authored 
      Previously, we only called indirect_branch_prediction_barrier on the
logical CPU that freed a vmcb. This function should be called on all
logical CPUs that last loaded the vmcb in question.

Fixes: 15d45071 ("KVM/x86: Add IBPB support")
Reported-by: default avatarNeel Natu <neelnatu@google.com>
Signed-off-by: default avatarJim Mattson <jmattson@google.com>
Reviewed-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      fd65d314
    • Junaid Shahid's avatar
      kvm: mmu: Fix race in emulated page table writes · 0e0fee5c
      Junaid Shahid authored 
      When a guest page table is updated via an emulated write,
kvm_mmu_pte_write() is called to update the shadow PTE using the just
written guest PTE value. But if two emulated guest PTE writes happened
concurrently, it is possible that the guest PTE and the shadow PTE end
up being out of sync. Emulated writes do not mark the shadow page as
unsync-ed, so this inconsistency will not be resolved even by a guest TLB
flush (unless the page was marked as unsync-ed at some other point).

This is fixed by re-reading the current value of the guest PTE after the
MMU lock has been acquired instead of just using the value that was
written prior to calling kvm_mmu_pte_write().
Signed-off-by: default avatarJunaid Shahid <junaids@google.com>
Reviewed-by: default avatarWanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      0e0fee5c
    • Liran Alon's avatar
      KVM: nVMX: vmcs12 revision_id is always VMCS12_REVISION even when copied from eVMCS · 52ad7eb3
      Liran Alon authored 
      vmcs12 represents the per-CPU cache of L1 active vmcs12.

This cache can be loaded by one of the following:
1) Guest making a vmcs12 active by exeucting VMPTRLD
2) Guest specifying eVMCS in VP assist page and executing
VMLAUNCH/VMRESUME.

Either way, vmcs12 should have revision_id of VMCS12_REVISION.
Which is not equal to eVMCS revision_id which specifies used
VersionNumber of eVMCS struct (e.g. KVM_EVMCS_VERSION).

Specifically, this causes an issue in restoring a nested VM state
because vmx_set_nested_state() verifies that vmcs12->revision_id
is equal to VMCS12_REVISION which was not true in case vmcs12
was populated from an eVMCS by vmx_get_nested_state() which calls
copy_enlightened_to_vmcs12().
Reviewed-by: default avatarDarren Kenny <darren.kenny@oracle.com>
Signed-off-by: default avatarLiran Alon <liran.alon@oracle.com>
Reviewed-by: default avatarVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      52ad7eb3
    • Liran Alon's avatar
      KVM: nVMX: Verify eVMCS revision id match supported eVMCS version on eVMCS VMPTRLD · 72aeb60c
      Liran Alon authored 
      According to TLFS section 16.11.2 Enlightened VMCS, the first u32
field of eVMCS should specify eVMCS VersionNumber.

This version should be in the range of supported eVMCS versions exposed
to guest via CPUID.0x4000000A.EAX[0:15].
The range which KVM expose to guest in this CPUID field should be the
same as the value returned in vmcs_version by nested_enable_evmcs().

According to the above, eVMCS VMPTRLD should verify that version specified
in given eVMCS is in the supported range. However, current code
mistakenly verfies this field against VMCS12_REVISION.

One can also see that when KVM use eVMCS, it makes sure that
alloc_vmcs_cpu() sets allocated eVMCS revision_id to KVM_EVMCS_VERSION.

Obvious fix should just change eVMCS VMPTRLD to verify first u32 field
of eVMCS is equal to KVM_EVMCS_VERSION.
However, it turns out that Microsoft Hyper-V fails to comply to their
own invented interface: When Hyper-V use eVMCS, it just sets first u32
field of eVMCS to revision_id specified in MSR_IA32_VMX_BASIC (In our
case: VMCS12_REVISION). Instead of used eVMCS version number which is
one of the supported versions specified in CPUID.0x4000000A.EAX[0:15].
To overcome Hyper-V bug, we accept either a supported eVMCS version
or VMCS12_REVISION as valid values for first u32 field of eVMCS.

Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: default avatarNikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: default avatarMark Kanda <mark.kanda@oracle.com>
Signed-off-by: default avatarLiran Alon <liran.alon@oracle.com>
Reviewed-by: default avatarVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      72aeb60c
    • Leonid Shatz's avatar
      KVM: nVMX/nSVM: Fix bug which sets vcpu->arch.tsc_offset to L1 tsc_offset · 326e7425
      Leonid Shatz authored 
      Since commit e79f245d ("X86/KVM: Properly update 'tsc_offset' to
represent the running guest"), vcpu->arch.tsc_offset meaning was
changed to always reflect the tsc_offset value set on active VMCS.
Regardless if vCPU is currently running L1 or L2.

However, above mentioned commit failed to also change
kvm_vcpu_write_tsc_offset() to set vcpu->arch.tsc_offset correctly.
This is because vmx_write_tsc_offset() could set the tsc_offset value
in active VMCS to given offset parameter *plus vmcs12->tsc_offset*.
However, kvm_vcpu_write_tsc_offset() just sets vcpu->arch.tsc_offset
to given offset parameter. Without taking into account the possible
addition of vmcs12->tsc_offset. (Same is true for SVM case).

Fix this issue by changing kvm_x86_ops->write_tsc_offset() to return
actually set tsc_offset in active VMCS and modify
kvm_vcpu_write_tsc_offset() to set returned value in
vcpu->arch.tsc_offset.
In addition, rename write_tsc_offset() callback to write_l1_tsc_offset()
to make it clear that it is meant to set L1 TSC offset.

Fixes: e79f245d ("X86/KVM: Properly update 'tsc_offset' to represent the running guest")
Reviewed-by: default avatarLiran Alon <liran.alon@oracle.com>
Reviewed-by: default avatarMihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: default avatarKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: default avatarLeonid Shatz <leonid.shatz@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      326e7425
    • Yi Wang's avatar
      x86/kvm/vmx: fix old-style function declaration · 1e4329ee
      Yi Wang authored 
      The inline keyword which is not at the beginning of the function
declaration may trigger the following build warnings, so let's fix it:

arch/x86/kvm/vmx.c:1309:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5947:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5985:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:6023:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: default avatarYi Wang <wang.yi59@zte.com.cn>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      1e4329ee
    • Yi Wang's avatar
      KVM: x86: fix empty-body warnings · 354cb410
      Yi Wang authored 
      We get the following warnings about empty statements when building
with 'W=1':

arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Rework the debug helper macro to get rid of these warnings.
Signed-off-by: default avatarYi Wang <wang.yi59@zte.com.cn>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      354cb410
    • Liran Alon's avatar
      KVM: VMX: Update shared MSRs to be saved/restored on MSR_EFER.LMA changes · f48b4711
      Liran Alon authored 
      When guest transitions from/to long-mode by modifying MSR_EFER.LMA,
the list of shared MSRs to be saved/restored on guest<->host
transitions is updated (See vmx_set_efer() call to setup_msrs()).

On every entry to guest, vcpu_enter_guest() calls
vmx_prepare_switch_to_guest(). This function should also take care
of setting the shared MSRs to be saved/restored. However, the
function does nothing in case we are already running with loaded
guest state (vmx->loaded_cpu_state != NULL).

This means that even when guest modifies MSR_EFER.LMA which results
in updating the list of shared MSRs, it isn't being taken into account
by vmx_prepare_switch_to_guest() because it happens while we are
running with loaded guest state.

To fix above mentioned issue, add a flag to mark that the list of
shared MSRs has been updated and modify vmx_prepare_switch_to_guest()
to set shared MSRs when running with host state *OR* list of shared
MSRs has been updated.

Note that this issue was mistakenly introduced by commit
678e315e ("KVM: vmx: add dedicated utility to access guest's
kernel_gs_base") because previously vmx_set_efer() always called
vmx_load_host_state() which resulted in vmx_prepare_switch_to_guest() to
set shared MSRs.

Fixes: 678e315e ("KVM: vmx: add dedicated utility to access guest's kernel_gs_base")
Reported-by: default avatarEyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: default avatarMihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: default avatarLiam Merwick <liam.merwick@oracle.com>
Reviewed-by: default avatarJim Mattson <jmattson@google.com>
Signed-off-by: default avatarLiran Alon <liran.alon@oracle.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      f48b4711
    • Liran Alon's avatar
      KVM: x86: Fix kernel info-leak in KVM_HC_CLOCK_PAIRING hypercall · bcbfbd8e
      Liran Alon authored 
      kvm_pv_clock_pairing() allocates local var
"struct kvm_clock_pairing clock_pairing" on stack and initializes
all it's fields besides padding (clock_pairing.pad[]).

Because clock_pairing var is written completely (including padding)
to guest memory, failure to init struct padding results in kernel
info-leak.

Fix the issue by making sure to also init the padding with zeroes.

Fixes: 55dd00a7 ("KVM: x86: add KVM_HC_CLOCK_PAIRING hypercall")
Reported-by: syzbot+a8ef68d71211ba264f56@syzkaller.appspotmail.com
Reviewed-by: default avatarMark Kanda <mark.kanda@oracle.com>
Signed-off-by: default avatarLiran Alon <liran.alon@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      bcbfbd8e
    • Liran Alon's avatar
      KVM: nVMX: Fix kernel info-leak when enabling KVM_CAP_HYPERV_ENLIGHTENED_VMCS more than once · 7f9ad1df
      Liran Alon authored 
      Consider the case that userspace enables KVM_CAP_HYPERV_ENLIGHTENED_VMCS twice:
1) kvm_vcpu_ioctl_enable_cap() is called to enable
KVM_CAP_HYPERV_ENLIGHTENED_VMCS which calls nested_enable_evmcs().
2) nested_enable_evmcs() sets enlightened_vmcs_enabled to true and fills
vmcs_version which is then copied to userspace.
3) kvm_vcpu_ioctl_enable_cap() is called again to enable
KVM_CAP_HYPERV_ENLIGHTENED_VMCS which calls nested_enable_evmcs().
4) This time nested_enable_evmcs() just returns 0 as
enlightened_vmcs_enabled is already true. *Without filling
vmcs_version*.
5) kvm_vcpu_ioctl_enable_cap() continues as usual and copies
*uninitialized* vmcs_version to userspace which leads to kernel info-leak.

Fix this issue by simply changing nested_enable_evmcs() to always fill
vmcs_version output argument. Even when enlightened_vmcs_enabled is
already set to true.

Note that SVM's nested_enable_evmcs() should not be modified because it
always returns a non-zero value (-ENODEV) which results in
kvm_vcpu_ioctl_enable_cap() skipping the copy of vmcs_version to
userspace (as it should).

Fixes: 57b119da ("KVM: nVMX: add KVM_CAP_HYPERV_ENLIGHTENED_VMCS capability")
Reported-by: syzbot+cfbc368e283d381f8cef@syzkaller.appspotmail.com
Reviewed-by: default avatarKrish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: default avatarVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: default avatarLiran Alon <liran.alon@oracle.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      7f9ad1df
    • Wei Wang's avatar
      svm: Add mutex_lock to protect apic_access_page_done on AMD systems · 30510387
      Wei Wang authored 
      There is a race condition when accessing kvm->arch.apic_access_page_done.
Due to it, x86_set_memory_region will fail when creating the second vcpu
for a svm guest.

Add a mutex_lock to serialize the accesses to apic_access_page_done.
This lock is also used by vmx for the same purpose.
Signed-off-by: default avatarWei Wang <wawei@amazon.de>
Signed-off-by: default avatarAmadeusz Juskowiak <ajusk@amazon.de>
Signed-off-by: default avatarJulian Stecklina <jsteckli@amazon.de>
Signed-off-by: default avatarSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: default avatarJoerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      30510387
    • Wanpeng Li's avatar
      KVM: X86: Fix scan ioapic use-before-initialization · e97f852f
      Wanpeng Li authored 
      Reported by syzkaller:

 BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8
 PGD 80000003ec4da067 P4D 80000003ec4da067 PUD 3f7bfa067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 7 PID: 5059 Comm: debug Tainted: G           OE     4.19.0-rc5 #16
 RIP: 0010:__lock_acquire+0x1a6/0x1990
 Call Trace:
  lock_acquire+0xdb/0x210
  _raw_spin_lock+0x38/0x70
  kvm_ioapic_scan_entry+0x3e/0x110 [kvm]
  vcpu_enter_guest+0x167e/0x1910 [kvm]
  kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm]
  kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm]
  do_vfs_ioctl+0xa5/0x690
  ksys_ioctl+0x6d/0x80
  __x64_sys_ioctl+0x1a/0x20
  do_syscall_64+0x83/0x6e0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT6 msr
and triggers scan ioapic logic to load synic vectors into EOI exit bitmap.
However, irqchip is not initialized by this simple testcase, ioapic/apic
objects should not be accessed.
This can be triggered by the following program:

    #define _GNU_SOURCE

    #include <endian.h>
    #include <stdint.h>
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <sys/syscall.h>
    #include <sys/types.h>
    #include <unistd.h>

    uint64_t r[3] = {0xffffffffffffffff, 0xffffffffffffffff, 0xffffffffffffffff};

    int main(void)
    {
    	syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
    	long res = 0;
    	memcpy((void*)0x20000040, "/dev/kvm", 9);
    	res = syscall(__NR_openat, 0xffffffffffffff9c, 0x20000040, 0, 0);
    	if (res != -1)
    		r[0] = res;
    	res = syscall(__NR_ioctl, r[0], 0xae01, 0);
    	if (res != -1)
    		r[1] = res;
    	res = syscall(__NR_ioctl, r[1], 0xae41, 0);
    	if (res != -1)
    		r[2] = res;
    	memcpy(
    			(void*)0x20000080,
    			"\x01\x00\x00\x00\x00\x5b\x61\xbb\x96\x00\x00\x40\x00\x00\x00\x00\x01\x00"
    			"\x08\x00\x00\x00\x00\x00\x0b\x77\xd1\x78\x4d\xd8\x3a\xed\xb1\x5c\x2e\x43"
    			"\xaa\x43\x39\xd6\xff\xf5\xf0\xa8\x98\xf2\x3e\x37\x29\x89\xde\x88\xc6\x33"
    			"\xfc\x2a\xdb\xb7\xe1\x4c\xac\x28\x61\x7b\x9c\xa9\xbc\x0d\xa0\x63\xfe\xfe"
    			"\xe8\x75\xde\xdd\x19\x38\xdc\x34\xf5\xec\x05\xfd\xeb\x5d\xed\x2e\xaf\x22"
    			"\xfa\xab\xb7\xe4\x42\x67\xd0\xaf\x06\x1c\x6a\x35\x67\x10\x55\xcb",
    			106);
    	syscall(__NR_ioctl, r[2], 0x4008ae89, 0x20000080);
    	syscall(__NR_ioctl, r[2], 0xae80, 0);
    	return 0;
    }

This patch fixes it by bailing out scan ioapic if ioapic is not initialized in
kernel.
Reported-by: default avatarWei Wu <ww9210@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wei Wu <ww9210@gmail.com>
Signed-off-by: default avatarWanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      e97f852f
    • Wanpeng Li's avatar
      KVM: LAPIC: Fix pv ipis use-before-initialization · 38ab012f
      Wanpeng Li authored 
      Reported by syzkaller:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000014
 PGD 800000040410c067 P4D 800000040410c067 PUD 40410d067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 3 PID: 2567 Comm: poc Tainted: G           OE     4.19.0-rc5 #16
 RIP: 0010:kvm_pv_send_ipi+0x94/0x350 [kvm]
 Call Trace:
  kvm_emulate_hypercall+0x3cc/0x700 [kvm]
  handle_vmcall+0xe/0x10 [kvm_intel]
  vmx_handle_exit+0xc1/0x11b0 [kvm_intel]
  vcpu_enter_guest+0x9fb/0x1910 [kvm]
  kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm]
  kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm]
  do_vfs_ioctl+0xa5/0x690
  ksys_ioctl+0x6d/0x80
  __x64_sys_ioctl+0x1a/0x20
  do_syscall_64+0x83/0x6e0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The reason is that the apic map has not yet been initialized, the testcase
triggers pv_send_ipi interface by vmcall which results in kvm->arch.apic_map
is dereferenced. This patch fixes it by checking whether or not apic map is
NULL and bailing out immediately if that is the case.

Fixes: 4180bf1b (KVM: X86: Implement "send IPI" hypercall)
Reported-by: default avatarWei Wu <ww9210@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wei Wu <ww9210@gmail.com>
Signed-off-by: default avatarWanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      38ab012f
    • Luiz Capitulino's avatar
      KVM: VMX: re-add ple_gap module parameter · a87c99e6
      Luiz Capitulino authored 
      Apparently, the ple_gap parameter was accidentally removed
by commit c8e88717. Add it
back.
Signed-off-by: default avatarLuiz Capitulino <lcapitulino@redhat.com>
Cc: stable@vger.kernel.org
Fixes: c8e88717Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      a87c99e6
  3. 25 Nov, 2018 1 commit
  5. 18 Nov, 2018 21 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7