- 18 Jan, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix a buffer overflow in mgmt_mesh_add - Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2 - Fix hci_qca shutdown on closed serdev - Fix possible circular locking dependencies on ISO code - Fix possible deadlock in rfcomm_sk_state_change * tag 'for-net-2023-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: Fix possible deadlock in rfcomm_sk_state_change Bluetooth: ISO: Fix possible circular locking dependency Bluetooth: hci_event: Fix Invalid wait context Bluetooth: ISO: Fix possible circular locking dependency Bluetooth: hci_sync: fix memory leak in hci_update_adv_data() Bluetooth: hci_qca: Fix driver shutdown on closed serdev Bluetooth: hci_conn: Fix memory leaks Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2 Bluetooth: Fix a buffer overflow in mgmt_mesh_add() ==================== Link: https://lore.kernel.org/r/20230118002944.1679845-1-luiz.dentz@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== bpf 2023-01-16 We've added 6 non-merge commits during the last 8 day(s) which contain a total of 6 files changed, 22 insertions(+), 24 deletions(-). The main changes are: 1) Mitigate a Spectre v4 leak in unprivileged BPF from speculative pointer-as-scalar type confusion, from Luis Gerhorst. 2) Fix a splat when pid 1 attaches a BPF program that attempts to send killing signal to itself, from Hao Sun. 3) Fix BPF program ID information in BPF_AUDIT_UNLOAD as well as PERF_BPF_EVENT_PROG_UNLOAD events, from Paul Moore. 4) Fix BPF verifier warning triggered from invalid kfunc call in backtrack_insn, also from Hao Sun. 5) Fix potential deadlock in htab_lock_bucket from same bucket index but different map_locked index, from Tonghao Zhang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation bpf: hash map, avoid deadlock with suitable hash mask bpf: remove the do_idr_lock parameter from bpf_prog_free_id() bpf: restore the ebpf program ID for BPF_AUDIT_UNLOAD and PERF_BPF_EVENT_PROG_UNLOAD bpf: Skip task with pid=1 in send_signal_common() bpf: Skip invalid kfunc call in backtrack_insn ==================== Link: https://lore.kernel.org/r/20230116230745.21742-1-daniel@iogearbox.netSigned-off-by:
-
Shyam Sundar S K authored
Due to other additional responsibilities Tom would no longer be able to support AMD XGBE driver. Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230116085015.443127-1-Shyam-sundar.S-k@amd.comSigned-off-by:
-
Caleb Connolly authored
The IPA interrupt can fire when pm_runtime is disabled due to it racing with the PM suspend/resume code. This causes a splat in the interrupt handler when it tries to call pm_runtime_get(). Explicitly disable the interrupt in our ->suspend callback, and re-enable it in ->resume to avoid this. If there is an interrupt pending it will be handled after resuming. The interrupt is a wake_irq, as a result even when disabled if it fires it will cause the system to wake from suspend as well as cancel any suspend transition that may be in progress. If there is an interrupt pending, the ipa_isr_thread handler will be called after resuming. Fixes: 1aac309d ("net: ipa: use autosuspend") Signed-off-by:
Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.orgSigned-off-by:
-
- 17 Jan, 2023 12 commits
-
-
Ying Hsu authored
syzbot reports a possible deadlock in rfcomm_sk_state_change [1]. While rfcomm_sock_connect acquires the sk lock and waits for the rfcomm lock, rfcomm_sock_release could have the rfcomm lock and hit a deadlock for acquiring the sk lock. Here's a simplified flow: rfcomm_sock_connect: lock_sock(sk) rfcomm_dlc_open: rfcomm_lock() rfcomm_sock_release: rfcomm_sock_shutdown: rfcomm_lock() __rfcomm_dlc_close: rfcomm_k_state_change: lock_sock(sk) This patch drops the sk lock before calling rfcomm_dlc_open to avoid the possible deadlock and holds sk's reference count to prevent use-after-free after rfcomm_dlc_open completes. Reported-by: syzbot+d7ce59...@syzkaller.appspotmail.com Fixes: 1804fdf6 ("Bluetooth: btintel: Combine setting up MSFT extension") Link: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 [1] Signed-off-by:Ying Hsu <yinghsu@chromium.org> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This attempts to fix the following trace: iso-tester/52 is trying to acquire lock: ffff8880024e0070 (&hdev->lock){+.+.}-{3:3}, at: iso_sock_listen+0x29e/0x440 but task is already holding lock: ffff888001978130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_sock_listen+0x8b/0x440 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: lock_acquire+0x176/0x3d0 lock_sock_nested+0x32/0x80 iso_connect_cfm+0x1a3/0x630 hci_cc_le_setup_iso_path+0x195/0x340 hci_cmd_complete_evt+0x1ae/0x500 hci_event_packet+0x38e/0x7c0 hci_rx_work+0x34c/0x980 process_one_work+0x5a5/0x9a0 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x22/0x30 -> #1 (hci_cb_list_lock){+.+.}-{3:3}: lock_acquire+0x176/0x3d0 __mutex_lock+0x13b/0xf50 hci_le_remote_feat_complete_evt+0x17e/0x320 hci_event_packet+0x38e/0x7c0 hci_rx_work+0x34c/0x980 process_one_work+0x5a5/0x9a0 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x22/0x30 -> #0 (&hdev->lock){+.+.}-{3:3}: check_prev_add+0xfc/0x1190 __lock_acquire+0x1e27/0x2750 lock_acquire+0x176/0x3d0 __mutex_lock+0x13b/0xf50 iso_sock_listen+0x29e/0x440 __sys_listen+0xe6/0x160 __x64_sys_listen+0x25/0x30 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x62/0xcc other info that might help us debug this: Chain exists of: &hdev->lock --> hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_ISO Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by iso-tester/52: #0: ffff888001978130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_sock_listen+0x8b/0x440 Fixes: f764a6c2 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: -
Luiz Augusto von Dentz authored
This fixes the following trace caused by attempting to lock cmd_sync_work_lock while holding the rcu_read_lock: kworker/u3:2/212 is trying to lock: ffff888002600910 (&hdev->cmd_sync_work_lock){+.+.}-{3:3}, at: hci_cmd_sync_queue+0xad/0x140 other info that might help us debug this: context-{4:4} 4 locks held by kworker/u3:2/212: #0: ffff8880028c6530 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x4dc/0x9a0 #1: ffff888001aafde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x4dc/0x9a0 #2: ffff888002600070 (&hdev->lock){+.+.}-{3:3}, at: hci_cc_le_set_cig_params+0x64/0x4f0 #3: ffffffffa5994b00 (rcu_read_lock){....}-{1:2}, at: hci_cc_le_set_cig_params+0x2f9/0x4f0 Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: -
Luiz Augusto von Dentz authored
This attempts to fix the following trace: kworker/u3:1/184 is trying to acquire lock: ffff888001888130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_connect_cfm+0x2de/0x690 but task is already holding lock: ffff8880028d1c20 (&conn->lock){+.+.}-{2:2}, at: iso_connect_cfm+0x265/0x690 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&conn->lock){+.+.}-{2:2}: lock_acquire+0x176/0x3d0 _raw_spin_lock+0x2a/0x40 __iso_sock_close+0x1dd/0x4f0 iso_sock_release+0xa0/0x1b0 sock_close+0x5e/0x120 __fput+0x102/0x410 task_work_run+0xf1/0x160 exit_to_user_mode_prepare+0x170/0x180 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x4e/0x90 entry_SYSCALL_64_after_hwframe+0x62/0xcc -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: check_prev_add+0xfc/0x1190 __lock_acquire+0x1e27/0x2750 lock_acquire+0x176/0x3d0 lock_sock_nested+0x32/0x80 iso_connect_cfm+0x2de/0x690 hci_cc_le_setup_iso_path+0x195/0x340 hci_cmd_complete_evt+0x1ae/0x500 hci_event_packet+0x38e/0x7c0 hci_rx_work+0x34c/0x980 process_one_work+0x5a5/0x9a0 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x22/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&conn->lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); lock(&conn->lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); *** DEADLOCK *** Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type") Fixes: f764a6c2 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: -
Zhengchao Shao authored
When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR to pass the instance to callback so no memory needs to be allocated. Fixes: 651cd3d6 ("Bluetooth: convert hci_update_adv_data to hci_sync") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194 Fixes: 7e7bbddd ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Zhengchao Shao authored
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or hci_le_big_terminate(), the memory pointed by variable d is not freed, which will cause memory leak. Add release process to error path. Fixes: eca0ae4a ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by:
-
Luiz Augusto von Dentz authored
Don't try to use HCI_OP_LE_READ_BUFFER_SIZE_V2 if controller don't support ISO channels, but in order to check if ISO channels are supported HCI_OP_LE_READ_LOCAL_FEATURES needs to be done earlier so the features bits can be checked on hci_le_read_buffer_size_sync. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216817 Fixes: c1631dbc ("Bluetooth: hci_sync: Fix hci_read_buffer_size_sync") Cc: stable@vger.kernel.org # 6.1 Signed-off-by:
-
Harshit Mogalapalli authored
Smatch Warning: net/bluetooth/mgmt_util.c:375 mgmt_mesh_add() error: __memcpy() 'mesh_tx->param' too small (48 vs 50) Analysis: 'mesh_tx->param' is array of size 48. This is the destination. u8 param[sizeof(struct mgmt_cp_mesh_send) + 29]; // 19 + 29 = 48. But in the caller 'mesh_send' we reject only when len > 50. len > (MGMT_MESH_SEND_SIZE + 31) // 19 + 31 = 50. Fixes: b338d917 ("Bluetooth: Implement support for Mesh") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by:
Brian Gix <brian.gix@intel.com> Signed-off-by:
-
Heiner Kallweit authored
In a number of cases the driver assigns a default value of -1 to priv->plat->phy_addr. This may result in calling mdiobus_get_phy() with addr parameter being -1. Therefore check for this scenario and bail out before calling mdiobus_get_phy(). Fixes: 42e87024 ("net: stmmac: Fix case when PHY handle is not present") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/669f9671-ecd1-a41b-2727-7b73e3003985@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Heiner Kallweit authored
The caller may pass any value as addr, what may result in an out-of-bounds access to array mdio_map. One existing case is stmmac_init_phy() that may pass -1 as addr. Therefore validate addr before using it. Fixes: 7f854420 ("phy: Add API for {un}registering an mdio device to a bus.") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.comSigned-off-by:
-
Szymon Heidrich authored
Packet len computed as difference of length word extracted from skb data and four may result in a negative value. In such case processing of the buffer should be interrupted rather than setting sr_skb->len to an unexpectedly large value (due to cast from signed to unsigned integer) and passing sr_skb to usbnet_skb_return. Fixes: e9da0b56 ("sr9700: sanity check for packet length") Signed-off-by:
Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20230114182326.30479-1-szymon.heidrich@gmail.comSigned-off-by:
-
- 16 Jan, 2023 7 commits
-
-
Geetha sowjanya authored
Using GFP_KERNEL in preemption disable context, causing below warning when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. [ 32.542271] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 [ 32.550883] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 [ 32.558707] preempt_count: 1, expected: 0 [ 32.562710] RCU nest depth: 0, expected: 0 [ 32.566800] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc2-00269-gae9dcb91 #7 [ 32.576188] Hardware name: Marvell CN106XX board (DT) [ 32.581232] Call trace: [ 32.583670] dump_backtrace.part.0+0xe0/0xf0 [ 32.587937] show_stack+0x18/0x30 [ 32.591245] dump_stack_lvl+0x68/0x84 [ 32.594900] dump_stack+0x18/0x34 [ 32.598206] __might_resched+0x12c/0x160 [ 32.602122] __might_sleep+0x48/0xa0 [ 32.605689] __kmem_cache_alloc_node+0x2b8/0x2e0 [ 32.610301] __kmalloc+0x58/0x190 [ 32.613610] otx2_sq_aura_pool_init+0x1a8/0x314 [ 32.618134] otx2_open+0x1d4/0x9d0 To avoid use of GFP_ATOMIC for memory allocation, disable preemption after all memory allocation is done. Fixes: 4af1b64f ("octeontx2-pf: Fix lmtst ID used in aura free") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Cong Wang says: ==================== l2tp: fix race conditions in l2tp_tunnel_register() This patchset contains two patches, the first one is a preparation for the second one which is the actual fix. Please find more details in each patch description. I have ran the l2tp test (https://github.com/katalix/l2tp-ktest), all test cases are passed. v3: preserve EEXIST errno for user-space v2: move IDR allocation to l2tp_tunnel_register() ==================== Signed-off-by:
-
Cong Wang authored
The code in l2tp_tunnel_register() is racy in several ways: 1. It modifies the tunnel socket _after_ publishing it. 2. It calls setup_udp_tunnel_sock() on an existing socket without locking. 3. It changes sock lock class on fly, which triggers many syzbot reports. This patch amends all of them by moving socket initialization code before publishing and under sock lock. As suggested by Jakub, the l2tp lockdep class is not necessary as we can just switch to bh_lock_sock_nested(). Fixes: 37159ef2 ("l2tp: fix a lockdep splat") Fixes: 6b9f3423 ("l2tp: fix races in tunnel creation") Reported-by: syzbot+52866e24647f9a23403f@syzkaller.appspotmail.com Reported-by: syzbot+94cc2a66fc228b23f360@syzkaller.appspotmail.com Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Guillaume Nault <gnault@redhat.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Parkin <tparkin@katalix.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Reviewed-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Cong Wang authored
l2tp uses l2tp_tunnel_list to track all registered tunnels and to allocate tunnel ID's. IDR can do the same job. More importantly, with IDR we can hold the ID before a successful registration so that we don't need to worry about late error handling, it is not easy to rollback socket changes. This is a preparation for the following fix. Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Guillaume Nault <gnault@redhat.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Parkin <tparkin@katalix.com> Signed-off-by:
-
Eric Dumazet authored
syzbot reported a nasty crash [1] in net_tx_action() which made little sense until we got a repro. This repro installs a taprio qdisc, but providing an invalid TCA_RATE attribute. qdisc_create() has to destroy the just initialized taprio qdisc, and taprio_destroy() is called. However, the hrtimer used by taprio had already fired, therefore advance_sched() called __netif_schedule(). Then net_tx_action was trying to use a destroyed qdisc. We can not undo the __netif_schedule(), so we must wait until one cpu serviced the qdisc before we can proceed. Many thanks to Alexander Potapenko for his help. [1] BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline] BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] do_raw_spin_trylock include/linux/spinlock.h:191 [inline] __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 spin_trylock include/linux/spinlock.h:359 [inline] qdisc_run_begin include/net/sch_generic.h:187 [inline] qdisc_run+0xee/0x540 include/net/pkt_sched.h:125 net_tx_action+0x77c/0x9a0 net/core/dev.c:5086 __do_softirq+0x1cc/0x7fb kernel/softirq.c:571 run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934 smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164 kthread+0x31b/0x430 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 Uninit was created at: slab_post_alloc_hook mm/slab.h:732 [inline] slab_alloc_node mm/slub.c:3258 [inline] __kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970 kmalloc_reserve net/core/skbuff.c:358 [inline] __alloc_skb+0x346/0xcf0 net/core/skbuff.c:430 alloc_skb include/linux/skbuff.h:1257 [inline] nlmsg_new include/net/netlink.h:953 [inline] netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436 netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507 rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xabc/0xe90 net/socket.c:2482 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536 __sys_sendmsg net/socket.c:2565 [inline] __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022 Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
Pable Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Increase timeout to 120 seconds for netfilter selftests to fix nftables transaction tests, from Florian Westphal. 2) Fix overflow in bitmap_ip_create() due to integer arithmetics in a 64-bit bitmask, from Gavrilov Ilia. 3) Fix incorrect arithmetics in nft_payload with double-tagged vlan matching. ==================== Signed-off-by: -
Kurt Kanzenbach authored
Correct queue statistics reading. All queue statistics are stored as unsigned long values. The retrieval for ethtool fetches these values as u64. However, on some systems the size of the counters are 32 bit. That yields wrong queue statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by using the correct data type. Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short period of time: Non-patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 3775276254951 # ??? | q0_tx_irq_n: 879 | q0_rx_pkt_n: 1194000908909 # ??? | q0_rx_irq_n: 278 Patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 2434 | q0_tx_irq_n: 1274 | q0_rx_pkt_n: 1604 | q0_rx_irq_n: 846 Fixes: 68e9c5de ("net: stmmac: add ethtool per-queue statistic framework") Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
-
- 14 Jan, 2023 9 commits
-
-
Rahul Rameshbabu authored
Peek at old qdisc and graft only when deleting a leaf class in the htb, rather than when deleting the htb itself. Do not peek at the qdisc of the netdev queue when destroying the htb. The caller may already have grafted a new qdisc that is not part of the htb structure being destroyed. This fix resolves two use cases. 1. Using tc to destroy the htb. - Netdev was being prematurely activated before the htb was fully destroyed. 2. Using tc to replace the htb with another qdisc (which also leads to the htb being destroyed). - Premature netdev activation like previous case. Newly grafted qdisc was also getting accidentally overwritten when destroying the htb. Fixes: d03b195b ("sch_htb: Hierarchical QoS hardware offload") Signed-off-by:Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230113005528.302625-1-rrameshbabu@nvidia.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: userspace pm: create sockets for the right family Before these patches, the Userspace Path Manager would allow the creation of subflows with wrong families: taking the one of the MPTCP socket instead of the provided ones and resulting in the creation of subflows with likely not the right source and/or destination IPs. It would also allow the creation of subflows between different families or not respecting v4/v6-only socket attributes. Patch 1 lets the userspace PM select the proper family to avoid creating subflows with the wrong source and/or destination addresses because the family is not the expected one. Patch 2 makes sure the userspace PM doesn't allow the userspace to create subflows for a family that is not allowed. Patch 3 validates scenarios with a mix of v4 and v6 subflows for the same MPTCP connection. These patches fix issues introduced in v5.19 when the userspace path manager has been introduced. ==================== Link: https://lore.kernel.org/r/20230112-upstream-net-20230112-netlink-v4-v6-v1-0-6a8363a221d2@tessares.netSigned-off-by:
-
Matthieu Baerts authored
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux, it is possible to have that if the MPTCP socket has been created with AF_INET6 family without the IPV6_V6ONLY option. Here, a new IPv4 subflow is being added to the initial IPv6 connection, then being removed using Netlink commands. Cc: stable@vger.kernel.org # v5.19+ Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Matthieu Baerts authored
If an MPTCP socket has been created with AF_INET6 and the IPV6_V6ONLY option has been set, the userspace PM would allow creating subflows using IPv4 addresses, e.g. mapped in v6. The kernel side of userspace PM will also accept creating subflows with local and remote addresses having different families. Depending on the subflow socket's family, different behaviours are expected: - If AF_INET is forced with a v6 address, the kernel will take the last byte of the IP and try to connect to that: a new subflow is created but to a non expected address. - If AF_INET6 is forced with a v4 address, the kernel will try to connect to a v4 address (v4-mapped-v6). A -EBADF error from the connect() part is then expected. It is then required to check the given families can be accepted. This is done by using a new helper for addresses family matching, taking care of IPv4 vs IPv4-mapped-IPv6 addresses. This helper will be re-used later by the in-kernel path-manager to use mixed IPv4 and IPv6 addresses. While at it, a clear error message is now reported if there are some conflicts with the families that have been passed by the userspace. Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Reviewed-by:
-
Paolo Abeni authored
Let the caller specify the to-be-created subflow family. For a given MPTCP socket created with the AF_INET6 family, the current userspace PM can already ask the kernel to create subflows in v4 and v6. If "plain" IPv4 addresses are passed to the kernel, they are automatically mapped in v6 addresses "by accident". This can be problematic because the userspace will need to pass different addresses, now the v4-mapped-v6 addresses to destroy this new subflow. On the other hand, if the MPTCP socket has been created with the AF_INET family, the command to create a subflow in v6 will be accepted but the result will not be the one as expected as new subflow will be created in IPv4 using part of the v6 addresses passed to the kernel: not creating the expected subflow then. No functional change intended for the in-kernel PM where an explicit enforcement is currently in place. This arbitrary enforcement will be leveraged by other patches in a future version. Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Co-developed-by:
-
Clément Léger authored
Since the "ethernet-ports" node is retrieved using device_get_named_child_node(), it should be release after using it. Add missing fwnode_handle_put() and move the code that retrieved the node from device-tree to avoid complicated handling in case of error. Fixes: db8bcaad ("net: lan966x: add the basic lan966x driver") Signed-off-by:
Clément Léger <clement.leger@bootlin.com> Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.comSigned-off-by:
-
Vladimir Oltean authored
This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running. Fixes: 7294380c ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Esina Ekaterina authored
If uhdlc_priv_tsa != 1 then utdm is not initialized. And if ret != NULL then goto undo_uhdlc_init, where utdm is dereferenced. Same if dev == NULL. Found by Astra Linux on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8d68100a ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm") Signed-off-by:
Esina Ekaterina <eesina@astralinux.ru> Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ruSigned-off-by:
-
Jisoo Jang authored
Fix a use-after-free that occurs in kfree_skb() called from local_cleanup(). This could happen when killing nfc daemon (e.g. neard) after detaching an nfc device. When detaching an nfc device, local_cleanup() called from nfc_llcp_unregister_device() frees local->rx_pending and decreases local->ref by kref_put() in nfc_llcp_local_put(). In the terminating process, nfc daemon releases all sockets and it leads to decreasing local->ref. After the last release of local->ref, local_cleanup() called from local_release() frees local->rx_pending again, which leads to the bug. Setting local->rx_pending to NULL in local_cleanup() could prevent use-after-free when local_cleanup() is called twice. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in kfree_skb() Call Trace: dump_stack_lvl (lib/dump_stack.c:106) print_address_description.constprop.0.cold (mm/kasan/report.c:306) kasan_check_range (mm/kasan/generic.c:189) kfree_skb (net/core/skbuff.c:955) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172) nfc_llcp_local_put (net/nfc/llcp_core.c:181) llcp_sock_destruct (net/nfc/llcp_sock.c:959) __sk_destruct (net/core/sock.c:2133) sk_destruct (net/core/sock.c:2181) __sk_free (net/core/sock.c:2192) sk_free (net/core/sock.c:2203) llcp_sock_release (net/nfc/llcp_sock.c:646) __sock_release (net/socket.c:650) sock_close (net/socket.c:1365) __fput (fs/file_table.c:306) task_work_run (kernel/task_work.c:179) ptrace_notify (kernel/signal.c:2354) syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278) syscall_exit_to_user_mode (kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:86) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106) Allocated by task 4719: kasan_save_stack (mm/kasan/common.c:45) __kasan_slab_alloc (mm/kasan/common.c:325) slab_post_alloc_hook (mm/slab.h:766) kmem_cache_alloc_node (mm/slub.c:3497) __alloc_skb (net/core/skbuff.c:552) pn533_recv_response (drivers/nfc/pn533/usb.c:65) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671) usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704) tasklet_action_common.isra.0 (kernel/softirq.c:797) __do_softirq (kernel/softirq.c:571) Freed by task 1901: kasan_save_stack (mm/kasan/common.c:45) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/genericdd.c:518) __kasan_slab_free (mm/kasan/common.c:236) kmem_cache_free (mm/slub.c:3809) kfree_skbmem (net/core/skbuff.c:874) kfree_skb (net/core/skbuff.c:931) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617) nfc_unregister_device (net/nfc/core.c:1179) pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846) pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579) usb_unbind_interface (drivers/usb/core/driver.c:458) device_release_driver_internal (drivers/base/dd.c:1279) bus_remove_device (drivers/base/bus.c:529) device_del (drivers/base/core.c:3665) usb_disable_device (drivers/usb/core/message.c:1420) usb_disconnect (drivers/usb/core.c:2261) hub_event (drivers/usb/core/hub.c:5833) process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281) worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423) kthread (kernel/kthread.c:319) ret_from_fork (arch/x86/entry/entry_64.S:301) Fixes: 3536da06 ("NFC: llcp: Clean local timers and works when removing a device") Signed-off-by:
Jisoo Jang <jisoo.jang@yonsei.ac.kr> Link: https://lore.kernel.org/r/20230111131914.3338838-1-jisoo.jang@yonsei.ac.krSigned-off-by:
-
- 13 Jan, 2023 8 commits
-
-
Luis Gerhorst authored
To mitigate Spectre v4, 2039f26f ("bpf: Fix leakage due to insufficient speculative store bypass mitigation") inserts lfence instructions after 1) initializing a stack slot and 2) spilling a pointer to the stack. However, this does not cover cases where a stack slot is first initialized with a pointer (subject to sanitization) but then overwritten with a scalar (not subject to sanitization because the slot was already initialized). In this case, the second write may be subject to speculative store bypass (SSB) creating a speculative pointer-as-scalar type confusion. This allows the program to subsequently leak the numerical pointer value using, for example, a branch-based cache side channel. To fix this, also sanitize scalars if they write a stack slot that previously contained a pointer. Assuming that pointer-spills are only generated by LLVM on register-pressure, the performance impact on most real-world BPF programs should be small. The following unprivileged BPF bytecode drafts a minimal exploit and the mitigation: [...] // r6 = 0 or 1 (skalar, unknown user input) // r7 = accessible ptr for side channel // r10 = frame pointer (fp), to be leaked // r9 = r10 # fp alias to encourage ssb *(u64 *)(r9 - 8) = r10 // fp[-8] = ptr, to be leaked // lfence added here because of pointer spill to stack. // // Ommitted: Dummy bpf_ringbuf_output() here to train alias predictor // for no r9-r10 dependency. // *(u64 *)(r10 - 8) = r6 // fp[-8] = scalar, overwrites ptr // 2039f26f: no lfence added because stack slot was not STACK_INVALID, // store may be subject to SSB // // fix: also add an lfence when the slot contained a ptr // r8 = *(u64 *)(r9 - 8) // r8 = architecturally a scalar, speculatively a ptr // // leak ptr using branch-based cache side channel: r8 &= 1 // choose bit to leak if r8 == 0 goto SLOW // no mispredict // architecturally dead code if input r6 is 0, // only executes speculatively iff ptr bit is 1 r8 = *(u64 *)(r7 + 0) # encode bit in cache (0: slow, 1: fast) SLOW: [...] After running this, the program can time the access to *(r7 + 0) to determine whether the chosen pointer bit was 0 or 1. Repeat this 64 times to recover the whole address on amd64. In summary, sanitization can only be skipped if one scalar is overwritten with another scalar. Scalar-confusion due to speculative store bypass can not lead to invalid accesses because the pointer bounds deducted during verification are enforced using branchless logic. See 979d63d5 ("bpf: prevent out of bounds speculation on pointer arithmetic") for details. Do not make the mitigation depend on !env->allow_{uninit_stack,ptr_leaks} because speculative leaks are likely unexpected if these were enabled. For example, leaking the address to a protected log file may be acceptable while disabling the mitigation might unintentionally leak the address into the cached-state of a map that is accessible to unprivileged processes. Fixes: 2039f26f ("bpf: Fix leakage due to insufficient speculative store bypass mitigation") Signed-off-by:
Luis Gerhorst <gerhorst@cs.fau.de> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Henriette Hofmeier <henriette.hofmeier@rub.de> Link: https://lore.kernel.org/bpf/edc95bad-aada-9cfc-ffe2-fa9bb206583c@cs.fau.de Link: https://lore.kernel.org/bpf/20230109150544.41465-1-gerhorst@cs.fau.de
-
Sudheer Mogilappagari authored
Current code for RSS_GET ethtool command includes netlink attributes in reply message to user space even if they are null. Added checks to include netlink attribute in reply message only if a value is received from driver. Drivers might return null for RSS indirection table or hash key. Instead of including attributes with empty value in the reply message, add netlink attribute only if there is content. Fixes: 7112a046 ("ethtool: add netlink based get rss support") Signed-off-by:
Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/20230111235607.85509-1-sudheer.mogilappagari@intel.comSigned-off-by:
-
David Howells authored
Fix rxrpc_connect_call() to return -ENOMEM rather than 0 if it fails to look up a peer. This generated a smatch warning: net/rxrpc/call_object.c:303 rxrpc_connect_call() warn: missing error code 'ret' I think this also fixes a syzbot-found bug: rxrpc: Assertion failed - 1(0x1) == 11(0xb) is false ------------[ cut here ]------------ kernel BUG at net/rxrpc/call_object.c:645! where the call being put is in the wrong state - as would be the case if we failed to clear up correctly after the error in rxrpc_connect_call(). Fixes: 9d35d880 ("rxrpc: Move client call connection to the I/O thread") Reported-by:kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Reported-and-tested-by: syzbot+4bb6356bb29d6299360e@syzkaller.appspotmail.com Signed-off-by:
David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/202301111153.9eZRYLf1-lkp@intel.com/Reviewed-by:
-
Jakub Kicinski authored
Raju Rangoju says: ==================== amd-xgbe: PFC and KR-Training fixes This patch series fixes the issues in kr-training and pfc 0001 - There is difference in the TX Flow Control registers (TFCR) between the revisions of the hardware. Update the driver to use the TFCR based on the reported version of the hardware. 0002 - AN restart triggered during KR training not only aborts the KR training process but also move the HW to unstable state. Add the necessary changes to fix kr-taining. ==================== Link: https://lore.kernel.org/r/20230111172852.1875384-1-Raju.Rangoju@amd.comSigned-off-by:
-
Raju Rangoju authored
AN restart triggered during KR training not only aborts the KR training process but also move the HW to unstable state. Driver has to wait upto 500ms or until the KR training is completed before restarting AN cycle. Fixes: 7c12aa08 ("amd-xgbe: Move the PHY support into amd-xgbe") Co-developed-by:
Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by:
Raju Rangoju <Raju.Rangoju@amd.com> Acked-by:
-
Raju Rangoju authored
There is difference in the TX Flow Control registers (TFCR) between the revisions of the hardware. The older revisions of hardware used to have single register per queue. Whereas, the newer revision of hardware (from ver 30H onwards) have one register per priority. Update the driver to use the TFCR based on the reported version of the hardware. Fixes: c5aa9e3b ("amd-xgbe: Initial AMD 10GbE platform driver") Co-developed-by:
Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Some fixes, stack only for now: * iTXQ conversion fixes, various bugs reported * properly reset multiple BSSID settings * fix for a link_sta crash * fix for AP VLAN checks * fix for MLO address translation * tag 'wireless-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix MLO + AP_VLAN check mac80211: Fix MLO address translation for multiple bss case wifi: mac80211: reset multiple BSSID options in stop_ap() wifi: mac80211: Fix iTXQ AMPDU fragmentation handling wifi: mac80211: sdata can be NULL during AMPDU start wifi: mac80211: Proper mark iTXQs for resumption wifi: mac80211: fix initialization of rx->link and rx->link_sta ==================== Link: https://lore.kernel.org/r/20230112111941.82408-1-johannes@sipsolutions.netSigned-off-by:
-
Tonghao Zhang authored
The deadlock still may occur while accessed in NMI and non-NMI context. Because in NMI, we still may access the same bucket but with different map_locked index. For example, on the same CPU, .max_entries = 2, we update the hash map, with key = 4, while running bpf prog in NMI nmi_handle(), to update hash map with key = 20, so it will have the same bucket index but have different map_locked index. To fix this issue, using min mask to hash again. Fixes: 20b6cc34 ("bpf: Avoid hashtab deadlock with map_locked") Signed-off-by:
Tonghao Zhang <tong@infragraf.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Song Liu <song@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Hou Tao <houtao1@huawei.com> Acked-by:
Yonghong Song <yhs@fb.com> Acked-by:
Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230111092903.92389-1-tong@infragraf.orgSigned-off-by:
Martin KaFai Lau <martin.lau@kernel.org>
-
