Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
  patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual

Noralf needs this for his tinydrm pull request.

* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
  drm/vc4: Remove vc4_debugfs_cleanup()
  dma/fence: Export enable-signaling tracepoint for emission by drivers
  drm/tilcdc: Remove tilcdc_debugfs_cleanup()
  drm/tegra: Remove tegra_debugfs_cleanup()
  drm/sti: Remove drm_debugfs_remove_files() calls
  drm/radeon: Remove drm_debugfs_remove_files() call
  drm/omap: Remove omap_debugfs_cleanup()
  drm/hdlcd: Remove hdlcd_debugfs_cleanup()
  drm/etnaviv: Remove etnaviv_debugfs_cleanup()
  drm/etnaviv: allow build with COMPILE_TEST
  drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
  drm/prime: Clarify DMA-BUF/GEM Object lifetime
  drm/ttm: Make sure BOs being swapped out are cacheable
  drm/atomic: Remove drm_atomic_debugfs_cleanup()
  drm: drm_minor_register(): Clean up debugfs on failure
  drm: debugfs: Remove all files automatically on cleanup
  drm/fourcc: add vivante tiled layout format modifiers
  drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
  drm/edid: Set AVI infoframe Q even when QS=0
  drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
  ...

Merge tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux into drm-next

Contains a single patch to create the fbdev at driver's registration
time instead of waiting for the connector status change.

* tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux:
  drm/atmel-hlcdc: Rework the fbdev creation logic

Merge tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next

ZTE DRM driver updates for 4.11:
 - Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM
   driver uses drm_display_mode_to_videomode().
 - Enable HDMI audio support through SPDIF interface based on generic
   hdmi-audio-codec driver.
 - Enable VOU VL (Video Layer) to support overlay plane with scaling
   function.
 - Refine zx_vou driver a bit and then add TV Encoder output device
   support.

[airlied: fixup plane format change]

* tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  drm: zte: add tvenc driver support
  dt: add bindings for ZTE tvenc device
  drm: zte: add function to configure vou_ctrl dividers
  drm: zte: move struct vou_inf into zx_vou driver
  drm: zte: add interlace mode support
  drm: zte: add overlay plane support
  drm: zte: add .atomic_disable hook to disable graphic layer
  drm: zte: make zx_plane accessible from zx_vou driver
  drm: zte: support hdmi audio through spdif
  drm: zte: select VIDEOMODE_HELPERS in Kconfig

Updated pull request after I pulled first time :)

* 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view

Hope I'm not too late before the cutoff for the v4.11 with these patches.
Mostly an asorted set of fixes that we have discovered while playing with
the code and preparing for the next set of features.

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm: mali-dp: fix stride setting for multi-plane formats
  drm: mali-dp: Add plane offset to the plane's physical start address register
  drm: mali-dp: Check for sufficient address space
  drm: mali-dp: Check hw version matches device-tree
  drm: mali-dp: Rename malidp_input_format to malidp_pixel_format
  drm: mali-dp: fix Lx_CONTROL register fields clobber
  drm: mali-dp: Fix transposed horizontal/vertical flip
  drm: mali-dp: Fix destination size handling when rotating
  drm: mali-dp: Don't force source size == crtc size
  drm: mali-dp: Check more use cases in the plane's ->atomic_check()
  drm: malidp: Remove event_list member from struct malidp_drm
  drm/arm/malidp: Fix possible dereference of NULL

Now that we wait for DRM panels to be available before registering the
DRM device (returning -EPROBE_DEFER if the panel has not been probed
yet), we no longer need to put the fbdev creation code in
->output_poll_changed().

This removes the 10 secs delay between DRM dev registration and fbdev
creation (polling period = 10 seconds).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.

Cc: eric@anholt.net
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-17-noralf@tronnes.org

It adds the TV Encoder driver to support video output in PAL and NTSC
format.  The driver uses syscon/regmap interface to configure register
bit sitting in SYSCTRL module for DAC power control.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

It adds bindings doc for ZTE VOU TV Encoder device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>

The clock control module (CRM) cannot always provide desired frequency
for all VOU output devices.  That's why VOU integrates a few dividers
to further divide the clocks from CRM.  Let's add an interface for
configuring these dividers.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

Although data in struct vou_inf is defined per output device, it doesn't
belong to the device itself but VOU control module.  All these data can
just be defined in VOU driver, and output device driver only needs to
invoke VOU driver function with device ID to enable/disable specific
output device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

It adds interlace mode support in VOU TIMING_CTRL and channel control
block, so that VOU driver gets ready to support output device in
interlace mode like TV Encoder.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

It enables VOU VL (Video Layer) to support overlay plane with scaling
function.  VL0 has some quirks on scaling support.  We choose to skip it
and only adds VL1 and VL2 into DRM core for now.

Function zx_plane_atomic_disable() gets moved around with no changes to
save a forward declaration.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

There are a few hardware bits for each graphic layer to control main/aux
channel and clock selection, as well as the layer enabling.  These bits
sit outside the layer block itself, but in VOU control glue block.  We
currently set these bits up at CRTC initialization for once, and do not
support disabling the layer.

This patch creates a pair of functions zx_vou_layer_enable[disable] to
be invoked from plane hooks .atomic_update and .atomic_disable to set up
and tear down the layer.  This is generic for both graphic and video
layers, so it will make the overlay plane support to be added later much
easier.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

Move struct zx_plane from zx_plane.c to zx_plane.h, so that it can be
accessed from zx_vou driver, and we can save the use of struct
zx_layer_data completely.  More importantly, those additional data used
by VOU controller to enable/disable graphic and video layers can later
be added and accessed much more easily from zx_vou driver.

While at it, we make two changes to zx_plane_init() interface:

 - Encode struct device pointer in zx_plane, so that we do not need to
   pass it as a parameter.
 - Change return of zx_plane_init() from struct drm_plane pointer to
   error code, since we can get the pointer from zx_plane in zx_vou
   driver now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

It enables HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver.  The HDMI hardware supports more audio
interfaces than SPDIF, like I2S, which may be added later.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ZTE DRM driver uses drm_display_mode_to_videomode() in function
zx_crtc_enable().  Select VIDEOMODE_HELPERS in Kconfig to fix the
following link error.

  LD      vmlinux.o
  MODPOST vmlinux.o
drivers/built-in.o: In function `zx_crtc_enable':
:(.text+0xbdeb8): undefined reference to `drm_display_mode_to_videomode'
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Currently this tracepoint is solely used by dma_fence_enable_sw_signaling,
however I have a need to manually perform the hw enabling of the
signaling and would like to emit this tracepoint for completeness.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124115758.31353-1-chris@chris-wilson.co.uk

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed. Also remove the unused tilcdc_module_ops.debugfs_cleanup()
callback. drm_debugfs_cleanup() removes all debugfs files using
debugfs_remove_recursive(), so there should be no need for such a
callback in the future.

Cc: jsarha@ti.com
Cc: tomi.valkeinen@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-16-noralf@tronnes.org

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.

Cc: thierry.reding@gmail.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-15-noralf@tronnes.org

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so it's not necessary to call
drm_debugfs_remove_files(). Additionally it uses
debugfs_remove_recursive() to clean up the debugfs files, so no need
for adding fake drm_info_node entries.

Cc: benjamin.gaignard@linaro.org
Cc: vincent.abriou@st.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Tested-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-14-noralf@tronnes.org

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so it's not necessary to call drm_debugfs_remove_files().

Cc: alexander.deucher@amd.com
Cc: christian.koenig@amd.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-13-noralf@tronnes.org

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.

Cc: tomi.valkeinen@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-12-noralf@tronnes.org

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.

Cc: liviu.dudau@arm.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-9-noralf@tronnes.org

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.

Cc: l.stach@pengutronix.de
Cc: linux+etnaviv@armlinux.org.uk
Cc: christian.gmeiner@gmail.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-8-noralf@tronnes.org

Make it possible to compile test the driver on other platforms.

Cc: l.stach@pengutronix.de
Cc: linux+etnaviv@armlinux.org.uk
Cc: christian.gmeiner@gmail.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-7-noralf@tronnes.org

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so no need to call drm_debugfs_remove_files().
Also remove empty drm_driver.debugfs_cleanup callback.

Cc: alexander.deucher@amd.com
Cc: christian.koenig@amd.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-5-noralf@tronnes.org

From the description of the "DMA-BUF/GEM Object references
and lifetime overview" it is not clear when exactly
dma_buf gets destroyed and memory freed: only driver
.release function mentioned which makes confusion on the
real buffer's lifetime.

Add more description so all the paths are covered.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
[danvet: Minor spelling fixes, and some clarification of the 2nd
paragraph.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1485500665-27690-1-git-send-email-andr2000@gmail.com

The current caching state may not be tt_cached, even though the
placement contains TTM_PL_FLAG_CACHED, because placement can contain
multiple caching flags. Trying to swap out such a BO would trip up the

	BUG_ON(ttm->caching_state != tt_cached);

in ttm_tt_swapout.

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so no need to call drm_debugfs_remove_files().
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-4-noralf@tronnes.org

Call drm_debugfs_cleanup() in case drm_debugfs_init() fails to
cover for failure in the drm_driver.debugfs_init callback.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-3-noralf@tronnes.org

Instead of having the drivers call drm_debugfs_remove_files() in
their drm_driver->debugfs_cleanup hook, do it automatically by
traversing minor->debugfs_list.
Also use debugfs_remove_recursive() so drivers who add their own
debugfs files don't have to keep track of them for removal.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-2-noralf@tronnes.org

Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
formats as well as so-called split-tiled variants for dual-pipe
hardware, where even and odd tiles start at different base addresses.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126153217.26916-1-p.zabel@pengutronix.de

drivers/gpu/drm/sti/sti_plane.c:76:33: error: ‘struct drm_framebuffer’
has no member named ‘pixel_format’; did you mean ‘format’?

I didn't look to hard at the casting to a char * and just did a
mechanical transformation of s/pixel_format/format->format/ as given in
commit 438b74a5 ("drm: Nuke fb->pixel_format").

Fixes: 438b74a5 ("drm: Nuke fb->pixel_format")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- cleanups&fixes for dw-hdmi bride driver (Laurent)
- updates for adv bridge driver (John Stultz) for nexus
- drm_crtc_from_index helper rollout (Shawn Guo)
- removing drm_framebuffer_unregister_private from drivers&core
- target_vblank (Andrey Grodzovsky)
- misc tiny stuff

* tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits)
  drm: qxl: Open code teardown function for qxl
  drm: qxl: Open code probing sequence for qxl
  drm/bridge: adv7511: Re-write the i2c address before EDID probing
  drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
  drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
  drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
  drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
  drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
  drm: vc4: use crtc helper drm_crtc_from_index()
  drm: tegra: use crtc helper drm_crtc_from_index()
  drm: nouveau: use crtc helper drm_crtc_from_index()
  drm: mediatek: use crtc helper drm_crtc_from_index()
  drm: kirin: use crtc helper drm_crtc_from_index()
  drm: exynos: use crtc helper drm_crtc_from_index()
  dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
  drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY
  drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
  drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
  drm: bridge: dw-hdmi: Detect PHY type at runtime
  drm: bridge: dw-hdmi: Handle overflow workaround based on device version
  ...

Final block of feature work for 4.11:

- gen8 pd cleanup from Matthew Auld
- more cleanups for view/vma (Chris)
- dmc support on glk (Anusha Srivatsa)
- use core crc api (Tomue)
- track wedged requests using fence.error (Chris)
- lots of psr fixes (Nagaraju, Vathsala)
- dp mst support, acked for merging through drm-intel by Takashi
  (Libin)
- huc loading support, including uapi for libva to use it (Anusha
  Srivatsa)

* tag 'drm-intel-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-intel: (111 commits)
  drm/i915: Update DRIVER_DATE to 20170123
  drm/i915: reinstate call to trace_i915_vma_bind
  drm/i915: Assert that created vma has a whole number of pages
  drm/i915: Assert the drm_mm_node is allocated when on the VM lists
  drm/i915: Treat an error from i915_vma_instance() as unlikely
  drm/i915: Reject vma creation larger than address space
  drm/i915: Use common LRU inactive vma bumping for unpin_from_display
  drm/i915: Do an unlocked wait before set-cache-level ioctl
  drm/i915/huc: Assert that HuC vma is placed in GuC accessible range
  drm/i915/huc: Avoid attempting to authenticate non-existent fw
  drm/i915: Set adjustment to zero on Up/Down interrupts if freq is already max/min
  drm/i915: Remove the double handling of 'flags from intel_mode_from_pipe_config()
  drm/i915: Remove crtc->config usage from intel_modeset_readout_hw_state()
  drm/i915: Release temporary load-detect state upon switching
  drm/i915: Remove i915_gem_object_to_ggtt()
  drm/i915: Remove i915_vma_create from VMA API
  drm/i915: Add a check that the VMA instance we lookup matches the request
  drm/i915: Rename some warts in the VMA API
  drm/i915: Track pinned vma in intel_plane_state
  drm/i915/get_params: Add HuC status to getparams
  ...

This reverts commit 54a07c7b,
and reinstates the original.

[airlied: this might be a bad plan for git].

commit 3846fd9b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Jan 11 10:01:17 2017 +0100

    drm/probe-helpers: Drop locking from poll_enable

    It was only needed to protect the connector_list walking, see

    commit 8c4ccc4a
    Author: Daniel Vetter <daniel.vetter@ffwll.ch>
    Date:   Thu Jul 9 23:44:26 2015 +0200

        drm/probe-helper: Grab mode_config.mutex in poll_init/enable

    Unfortunately the commit message of that patch fails to mention that
    the new locking check was for the connector_list.

    But that requirement disappeared in

    commit c36a3254
    Author: Daniel Vetter <daniel.vetter@ffwll.ch>
    Date:   Thu Dec 15 16:58:43 2016 +0100

        drm: Convert all helpers to drm_connector_list_iter

    and so we can drop this again.

    This fixes a locking inversion on nouveau, where the rpm code needs to
    re-enable. But in other places the rpm_get() calls are nested within
    the big modeset locks.

    While at it, also improve the kerneldoc for these two functions a
    notch.

    v2: Update the kerneldoc even more to explain that these functions
    can't be called concurrently, or bad things happen (Chris).

Backmerge Linus master to get the connector locking revert.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits)
  sysctl: fix proc_doulongvec_ms_jiffies_minmax()
  Revert "drm/probe-helpers: Drop locking from poll_enable"
  MAINTAINERS: add Dan Streetman to zbud maintainers
  MAINTAINERS: add Dan Streetman to zswap maintainers
  mm: do not export ioremap_page_range symbol for external module
  mn10300: fix build error of missing fpu_save()
  romfs: use different way to generate fsid for BLOCK or MTD
  frv: add missing atomic64 operations
  mm, page_alloc: fix premature OOM when racing with cpuset mems update
  mm, page_alloc: move cpuset seqcount checking to slowpath
  mm, page_alloc: fix fast-path race with cpuset update or removal
  mm, page_alloc: fix check for NULL preferred_zone
  kernel/panic.c: add missing \n
  fbdev: color map copying bounds checking
  frv: add atomic64_add_unless()
  mm/mempolicy.c: do not put mempolicy before using its nodemask
  radix-tree: fix private list warnings
  Documentation/filesystems/proc.txt: add VmPin
  mm, memcg: do not retry precharge charges
  proc: add a schedule point in proc_pid_readdir()
  ...

We perform the conversion between kernel jiffies and ms only when
exporting kernel value to user space.

We need to do the opposite operation when value is written by user.

Only matters when HZ != 1000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pin control fixes from Linus Walleij:
 "A bunch of pin control fixes for v4.10 that didn't get sent off until
  now, sorry for the delay.

  It's only driver fixes:

   - A bunch of fixes to the Intel drivers: broxton, baytrail. Bugs
     related to register offsets, IRQ, debounce functionality.

   - Fix a conflict amongst UART settings on the meson.

   - Fix the ethernet setting on the Uniphier.

   - A compilation warning squelched"

* tag 'pinctrl-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20
  pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM
  pinctrl: amd: avoid maybe-uninitalized warning
  pinctrl: baytrail: Do not add all GPIOs to IRQ domain
  pinctrl: baytrail: Rectify debounce support
  pinctrl: intel: Set pin direction properly
  pinctrl: broxton: Use correct PADCFGLOCK offset