- 23 Dec, 2016 4 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Some fixes came in while I was out, mostly intel and amdgpu ones, with one ast fix" Daniel Vetter says: "This should also shut up the WARN_ON(!intel_dp->lane_count) noise" * tag 'drm-fixes-for-4.10-rc1' of git://people.freedesktop.org/~airlied/linux: (35 commits) drm/amdgpu: update tile table for oland/hainan drm/amdgpu: update tile table for verde drm/amdgpu: update rev id for verde drm/amdgpu: update golden setting for verde drm/amdgpu: update rev id for oland drm/amdgpu: update golden setting for oland drm/amdgpu: update rev id for hainan drm/amdgpu: update golden setting for hainan drm/amdgpu: update rev id for pitcairn drm/amdgpu: update golden setting for pitcairn drm/amdgpu: update golden setting/tiling table of tahiti drm/i915: skip the first 4k of stolen memory on everything >= gen8 drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping drm/i915: Fix use after free in logical_render_ring_init drm/i915: disable PSR by default on HSW/BDW drm/i915: Fix setting of boost freq tunable drm/i915: tune down the fast link training vs boot fail drm/i915: Reorder phys backing storage release drm/i915/gen9: Fix PCODE polling during SAGV disabling drm/i915/gen9: Fix PCODE polling during CDCLK change notification ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "First round of -rc fixes for 4.10 kernel: - a series of qedr fixes - a series of rxe fixes - one i40iw fix - one cma fix - one cxgb4 fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/rxe: Don't check for null ptr in send() IB/rxe: Drop future atomic/read packets rather than retrying IB/rxe: Use BTH_PSN_MASK when ACKing duplicate sends qedr: Always notify the verb consumer of flushed CQEs qedr: clear the vendor error field in the work completion qedr: post_send/recv according to QP state qedr: ignore inline flag in read verbs qedr: modify QP state to error when destroying it qedr: return correct value on modify qp qedr: return error if destroy CQ failed qedr: configure the number of CQEs on CQ creation i40iw: Set 128B as the only supported RQ WQE size IB/cma: Fix a race condition in iboe_addr_get_sgid() IB/rxe: Fix a memory leak in rxe_qp_cleanup() iw_cxgb4: set correct FetchBurstMax for QPs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull late SCSI updates from James Bottomley: "This is mostly stuff which missed the initial pull. There's a new driver: qedi, and some ufs, ibmvscsis and ncr5380 updates plus some assorted driver fixes and also a fix for the bug where if a device goes into a blocked state between configuration and sysfs device add (which can be a long time under async probing) it would become permanently blocked" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits) scsi: avoid a permanent stop of the scsi device's request queue scsi: mpt3sas: Recognize and act on iopriority info scsi: qla2xxx: Fix Target mode handling with Multiqueue changes. scsi: qla2xxx: Add Block Multi Queue functionality. scsi: qla2xxx: Add multiple queue pair functionality. scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls. scsi: qla2xxx: Only allow operational MBX to proceed during RESET. scsi: hpsa: remove memory allocate failure message scsi: Update 3ware driver email addresses scsi: zfcp: fix rport unblock race with LUN recovery scsi: zfcp: do not trace pure benign residual HBA responses at default level scsi: zfcp: fix use-after-"free" in FC ingress path after TMF scsi: libcxgbi: return error if interface is not up scsi: cxgb4i: libcxgbi: add missing module_put() scsi: cxgb4i: libcxgbi: cxgb4: add T6 iSCSI completion feature scsi: cxgb4i: libcxgbi: add active open cmd for T6 adapters scsi: cxgb4i: use cxgb4_tp_smt_idx() to get smt_idx scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework. scsi: aacraid: remove wildcard for series 9 controllers scsi: ibmvscsi: add write memory barrier to CRQ processing ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull more ARC updates from Vineet Gupta: - Fix for aliasing VIPT dcache in old ARC700 cores - micro-optimization in ARC700 ProtV handler - Enable SG_CHAIN [Vladimir] - ARC HS38 core intc default to prio 1 * tag 'arc-4.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: mm: arc700: Don't assume 2 colours for aliasing VIPT dcache ARC: mm: No need to save cache version in @cpuinfo ARC: enable SG chaining ARCv2: intc: default all interrupts to priority 1 ARCv2: entry: document intr disable in hard isr ARC: ARCompact entry: elide re-reading ECR in ProtV handler
-
- 22 Dec, 2016 27 commits
-
-
James Bottomley authored
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes First set of i915 fixes for code in next. * tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: skip the first 4k of stolen memory on everything >= gen8 drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping drm/i915: Fix use after free in logical_render_ring_init drm/i915: disable PSR by default on HSW/BDW drm/i915: Fix setting of boost freq tunable drm/i915: tune down the fast link training vs boot fail drm/i915: Reorder phys backing storage release drm/i915/gen9: Fix PCODE polling during SAGV disabling drm/i915/gen9: Fix PCODE polling during CDCLK change notification drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is setting drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating drm/i915: drop the struct_mutex when wedged or trying to reset
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Here's the one lonely bugfix I talked about on irc. * tag 'drm-misc-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-misc: drivers/gpu/drm/ast: Fix infinite loop if read fails
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- fix display regression on DCE6/8 - Powergating fixes for GFX8 - amdgpu SI fixes (golden settings, proper rev id setup, etc.) * 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amdgpu: update tile table for oland/hainan drm/amdgpu: update tile table for verde drm/amdgpu: update rev id for verde drm/amdgpu: update golden setting for verde drm/amdgpu: update rev id for oland drm/amdgpu: update golden setting for oland drm/amdgpu: update rev id for hainan drm/amdgpu: update golden setting for hainan drm/amdgpu: update rev id for pitcairn drm/amdgpu: update golden setting for pitcairn drm/amdgpu: update golden setting/tiling table of tahiti drm/amdgpu: fix cursor setting of dce6/dce8 drm/amdgpu: refine set clock gating for tonga/polaris drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11. drm/amdgpu: add new gfx cg flags. drm/amdgpu: fix pg can't be disabled by PG mask. drm/amdgpu: always initialize gfx pg for gfx_v8.0. drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney. drm/amdgpu: fix init save/restore list in gfx_v8.0 drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0. ...
-
Linus Torvalds authored
Merge tag 'leds_for_4.10_email_update' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED maintainer email update from Jacek Anaszewski: "Update Jacek Anaszewski's email address" * tag 'leds_for_4.10_email_update' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: Update Jacek Anaszewski's email address
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "Just a set of small fixes that have either been queued up after the original pull for this merge window, or just missed the original pull request. - a few bcache fixes/changes from Eric and Kent - add WRITE_SAME to the command filter whitelist frm Mauricio - kill an unused struct member from Ritesh - partition IO alignment fix from Stefan - nvme sysfs printf fix from Stephen" * 'for-linus' of git://git.kernel.dk/linux-block: block: check partition alignment nvme : Use correct scnprintf in cmb show block: allow WRITE_SAME commands with the SG_IO ioctl block: Remove unused member (busy) from struct blk_queue_tag bcache: partition support: add 16 minors per bcacheN device bcache: Make gc wakeup sane, remove set_task_state()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "Here are new versions of two ACPICA changes that were deferred previously due to a problem they had introduced, two cleanups on top of them and the removal of a useless warning message from the ACPI core. Specifics: - Move some Linux-specific functionality to upstream ACPICA and update the in-kernel users of it accordingly (Lv Zheng) - Drop a useless warning (triggered by the lack of an optional object) from the ACPI namespace scanning code (Zhang Rui)" * tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel ACPI: do not warn if _BQC does not exist
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "They fix one bug introduced recently, a build warning and a kerneldoc function description. Specifics: - Prevent the acpi-cpufreq driver from crashing on exit by fixing a check against the __cpuhp_setup_state() return value and fix the kerneldoc description of that function to make it clear that it may return positive numbers on success too (Boris Ostrovsky) - Drop an incorrect __init annotation of a function in the s3c64xx cpufreq driver and fix a build warning generated (by older compilers) because of it (Arnd Bergmann)" * tag 'pm-fixes-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: s3c64xx: remove incorrect __init annotation cpufreq: Remove CPU hotplug callbacks only if they were initialized CPU/hotplug: Clarify description of __cpuhp_setup_state() return value
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - further fix thread wake-up for requests - use a bounce buffer to fix DMA issue for SSR register read MMC host: - sdhci: Fix a regression for runtime PM - sdhci-cadence: Add a proper SoC specific DT compatible" * tag 'mmc-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sd: Meet alignment requirements for raw_ssr DMA mmc: core: Further fix thread wake-up mmc: sdhci: Fix to handle MMC_POWER_UNDEFINED mmc: sdhci-cadence: add Socionext UniPhier specific compatible string
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull SElinux fix from James Morris: "From Paul: 'A small SELinux patch to fix some clang/llvm compiler warnings and ensure the tools under scripts work well in the face of kernel changes'" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: use the kernel headers when building scripts/selinux
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cache allocation interface from Thomas Gleixner: "This provides support for Intel's Cache Allocation Technology, a cache partitioning mechanism. The interface is odd, but the hardware interface of that CAT stuff is odd as well. We tried hard to come up with an abstraction, but that only allows rather simple partitioning, but no way of sharing and dealing with the per package nature of this mechanism. In the end we decided to expose the allocation bitmaps directly so all combinations of the hardware can be utilized. There are two ways of associating a cache partition: - Task A task can be added to a resource group. It uses the cache partition associated to the group. - CPU All tasks which are not member of a resource group use the group to which the CPU they are running on is associated with. That allows for simple CPU based partitioning schemes. The main expected user sare: - Virtualization so a VM can only trash only the associated part of the cash w/o disturbing others - Real-Time systems to seperate RT and general workloads. - Latency sensitive enterprise workloads - In theory this also can be used to protect against cache side channel attacks" [ Intel RDT is "Resource Director Technology". The interface really is rather odd and very specific, which delayed this pull request while I was thinking about it. The pull request itself came in early during the merge window, I just delayed it until things had calmed down and I had more time. But people tell me they'll use this, and the good news is that it is _so_ specific that it's rather independent of anything else, and no user is going to depend on the interface since it's pretty rare. So if push comes to shove, we can just remove the interface and nothing will break ] * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) x86/intel_rdt: Implement show_options() for resctrlfs x86/intel_rdt: Call intel_rdt_sched_in() with preemption disabled x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount x86/intel_rdt: Fix setting of closid when adding CPUs to a group x86/intel_rdt: Update percpu closid immeditately on CPUs affected by changee x86/intel_rdt: Reset per cpu closids on unmount x86/intel_rdt: Select KERNFS when enabling INTEL_RDT_A x86/intel_rdt: Prevent deadlock against hotplug lock x86/intel_rdt: Protect info directory from removal x86/intel_rdt: Add info files to Documentation x86/intel_rdt: Export the minimum number of set mask bits in sysfs x86/intel_rdt: Propagate error in rdt_mount() properly x86/intel_rdt: Add a missing #include MAINTAINERS: Add maintainer for Intel RDT resource allocation x86/intel_rdt: Add scheduler hook x86/intel_rdt: Add schemata file x86/intel_rdt: Add tasks files x86/intel_rdt: Add cpus file x86/intel_rdt: Add mkdir to resctrl file system x86/intel_rdt: Add "info" files to resctrl file system ...
-
Jacek Anaszewski authored
My previous email address is no longer valid. From now on, jacek.anaszewski@gmail.com should be used instead. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
-
Andrew Boyer authored
pkt->qp was already dereferenced earlier in the function. Fixes Smatch complaint: drivers/infiniband/sw/rxe/rxe_net.c:458 send() warn: variable dereferenced before check 'pkt->qp' (see line 441) Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Andrew Boyer authored
If the completer is in the middle of a large read operation, one lost packet can cause havoc. Going to COMPST_ERROR_RETRY will cause the requester to resend the request. After that, any packet from the first attempt still in the receive queue will be interpreted as an error, restarting the error/retry sequence. The transfer will quickly exhaust its retries. This behavior is very noticeable when doing 512KB reads on a QEMU system configured with 1500B MTU. Also, a resent request here will prompt the responder on the other side to immediately start resending, but the resent packets will get stuck in the already-loaded receive queue and will never be processed. Rather than erroring out every time an unexpected future packet arrives, just drop it. Eventually the retry timer will send a duplicate request; the completer will be able to make progress since the queue will start relatively empty. Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Andrew Boyer authored
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Amrani, Ram authored
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Amrani, Ram authored
We clear the vendor error field in the work completion so that if a work completion is erroneous the field won't confuse the caller. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Amrani, Ram authored
Enable posting to SQ only in RTS, ERR and SQD QP state. Enable posting to RQ in ERR QP state. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Amrani, Ram authored
In the current implementation a read verb with IB_SEND_INLINE may be illegally configured. In this fix we ignore the inline bit in the case of a read verb. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Amrani, Ram authored
Current code didn't modify the QP state to error because it queried the QP state as a bitmap while it isn't. So the code never got executed. This patch fixes this and queries for each QP state respectively and not at once via a bitmask. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Amrani, Ram authored
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Amrani, Ram authored
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Amrani, Ram authored
Configure ibcq->cqe when a CQ is created. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Chien Tin Tung authored
RQ WQE size other than 128B is not supported. Correct RQ size calculation to use 128B only. Since this breaks ABI, add additional code to provide compatibility with v4 user provider, libi40iw. Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Code that dereferences the struct net_device ip_ptr member must be protected with an in_dev_get() / in_dev_put() pair. Hence insert calls to these functions. Fixes: commit 7b85627b ("IB/cma: IBoE (RoCE) IP-based GID addressing") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: s3c64xx: remove incorrect __init annotation cpufreq: Remove CPU hotplug callbacks only if they were initialized CPU/hotplug: Clarify description of __cpuhp_setup_state() return value
-
Rafael J. Wysocki authored
* acpica: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel * acpi-scan: ACPI: do not warn if _BQC does not exist
-
- 21 Dec, 2016 9 commits
-
-
Gertjan van Wingerde authored
This address hasn't been accurate for several years now. Simply remove it. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 8924feff ("splice: lift pipe_lock out of splice_to_pipe()") caused a regression when there were no more readers left on a pipe that was being spliced into: rather than the expected SIGPIPE and -EPIPE return value, the writer would end up waiting forever for space to free up (which obviously was not going to happen with no readers around). Fixes: 8924feff ("splice: lift pipe_lock out of splice_to_pipe()") Reported-and-tested-by: Andreas Schwab <schwab@linux-m68k.org> Debugged-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # v4.9 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: - add Kernel address space layout randomization support - re-enable interrupts earlier now that we have a working IRQ stack - optimize the timer interrupt function to better cope with missed timer irqs - fix error return code in parisc perf code (by Dan Carpenter) - fix PAT debug code * 'parisc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Optimize timer interrupt function parisc: perf: return -EFAULT on error parisc: Enhance CPU detection code on PAT machines parisc: Re-enable interrupts early parisc: Enable KASLR
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull more NFS client updates from Trond Myklebust: "Highlights include: - further attribute cache improvements to make revalidation more fine grained - NFSv4 locking improvements Bugfixes: - nfs4_fl_prepare_ds must be careful about reporting success in files layout - pNFS/flexfiles: Instead of marking a device inactive, remove it from the cache" * tag 'nfs-for-4.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Retry the DELEGRETURN if the embedded GETATTR is rejected with EACCES NFS: Retry the CLOSE if the embedded GETATTR is rejected with EACCES NFSv4: Place the GETATTR operation before the CLOSE NFSv4: Also ask for attributes when downgrading to a READ-only state NFS: Don't abuse NFS_INO_REVAL_FORCED in nfs_post_op_update_inode_locked() pNFS: Return RW layouts on OPEN_DOWNGRADE NFSv4: Add encode/decode of the layoutreturn op in OPEN_DOWNGRADE NFS: Don't disconnect open-owner on NFS4ERR_BAD_SEQID NFSv4: ensure __nfs4_find_lock_state returns consistent result. NFSv4.1: nfs4_fl_prepare_ds must be careful about reporting success. pNFS/flexfiles: delete deviceid, don't mark inactive NFS: Clean up nfs_attribute_timeout() NFS: Remove unused function nfs_revalidate_inode_rcu() NFS: Fix and clean up the access cache validity checking NFS: Only look at the change attribute cache state in nfs_weak_revalidate() NFS: Clean up cache validity checking NFS: Don't revalidate the file on close if we hold a delegation NFSv4: Don't discard the attributes returned by asynchronous DELEGRETURN NFSv4: Update the attribute cache info in update_changeattr
-
Linus Torvalds authored
Merge branch 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux Pull scsi target cleanups from Bart Van Assche: "The changes here are: - a few small bug fixes for the iSCSI and user space target drivers. - minimize the target build time by about 30% by rearranging #include directives - fix the second argument passed to percpu_ida_alloc() - reduce the number of false positive warnings reported by sparse These patches pass Wu Fengguang's build bot tests and also the linux-next tests" * 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux: iscsi-target: Return error if unable to add network portal target: Fix spelling mistake and unwrap multi-line text target/iscsi: Fix double free in lio_target_tiqn_addtpg() target/user: Fix use-after-free of tcmu_cmds if they are expired target: Minimize #include directives target/user: Add an #include directive cxgbit: Add an #include directive ibmvscsi_tgt: Add two #include directives sbp-target: Add an #include directive qla2xxx: Add an #include directive configfs: Minimize #include directives usb: gadget: Fix second argument of percpu_ida_alloc() sbp-target: Fix second argument of percpu_ida_alloc() target/user: Fix a data type in tcmu_queue_cmd() target: Use NULL instead of 0 to represent a pointer
-
Takashi Iwai authored
This reverts commit 16200948. The commit was intended to cover the race condition, but it introduced yet another regression for devices with the implicit feedback, leading to a kernel panic due to NULL-dereference in an irq context. As the race condition that was addressed by the commit is very rare and the regression is much worse, let's revert the commit for rc1, and fix the issue properly in a later patch. Fixes: 16200948 ("ALSA: usb-audio: Fix race at stopping the stream") Reported-by: Ioan-Adrian Ratiu <adi@adirat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Moore authored
Commit 3322d0d6 ("selinux: keep SELinux in sync with new capability definitions") added a check on the defined capabilities without explicitly including the capability header file which caused problems when building genheaders for users of clang/llvm. Resolve this by using the kernel headers when building genheaders, which is arguably the right thing to do regardless, and explicitly including the kernel's capability.h header file in classmap.h. We also update the mdp build, even though it wasn't causing an error we really should be using the headers from the kernel we are building. Reported-by: Nicolas Iooss <nicolas.iooss@m4x.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
-
Paul Burton authored
The mmc_read_ssr() function results in DMA to the raw_ssr member of struct mmc_card, which is not guaranteed to be cache line aligned & thus might not meet the requirements set out in Documentation/DMA-API.txt: Warnings: Memory coherency operates at a granularity called the cache line width. In order for memory mapped by this API to operate correctly, the mapped region must begin exactly on a cache line boundary and end exactly on one (to prevent two separately mapped regions from sharing a single cache line). Since the cache line size may not be known at compile time, the API will not enforce this requirement. Therefore, it is recommended that driver writers who don't take special care to determine the cache line size at run time only map virtual regions that begin and end on page boundaries (which are guaranteed also to be cache line boundaries). On some systems where DMA is non-coherent this can lead to us losing data that shares cache lines with the raw_ssr array. Fix this by kmalloc'ing a temporary buffer to perform DMA into. kmalloc will ensure the buffer is suitably aligned, allowing the DMA to be performed without any loss of data. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 5275a652 ("mmc: sd: Export SD Status via “ssr” device attribute") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Arnd Bergmann authored
s3c64xx_cpufreq_config_regulator is incorrectly annotated as __init, since the caller is also not init: WARNING: vmlinux.o(.text+0x92fe1c): Section mismatch in reference from the function s3c64xx_cpufreq_driver_init() to the function .init.text:s3c64xx_cpufreq_config_regulator() With modern gcc versions, the function gets inline, so we don't see the warning, this only happens with gcc-4.6 and older. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-