Fixes following error caused during unloading driver.

[ 1127.542888] usb 5-1: USB disconnect, device number 2
[ 1127.542909] ozwpan ozwpan: remove, state 1
[ 1127.542933] usb usb5: USB disconnect, device number 1
[ 1127.618634] hub 5-0:1.0: hub_port_status failed (err = -19)
[ 1127.618647] hub_port_connect_change: 45 callbacks suppressed
[ 1127.618657] hub 5-0:1.0: connect-debounce failed, port 1 disabled
[ 1127.618668] hub 5-0:1.0: cannot disable port 1 (err = -19)
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.

Use the comedi_dio_insn_config() helper to properly handle instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.

Use the comedi_dio_insn_config() helper to properly handle instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.

Use the comedi_dio_insn_config() helper to properly handle instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.

Use the comedi_dio_insn_config() helper to properly handle instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace with struct vnt_usb_send_context.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move
s_vFillRTSHead union vnt_tx_data_head to void *pvRTS argument.
s_vFillCTSHead union vnt_tx_data_head to void *pvCTS argument.

In s_vGenerateTxParameter create union vnt_tx_data_head
pointing to rts_cts;
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As result of patch
rxtx.c s_vGenerateTxParameter create argument bool need rts

RTS and CTS void pointers can be merged.

Create new pointer rts_cts so that unions in s_vFillCTSHead/s_vFillRTSHead
can be joined.

If rts_cts is NULL neither exist.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow conditional statements to be based on true/false instead of
NULL or not pointer pvRTS.

Harmonise all call functions will bool type.

If need_rts is true then rts is needed.

If need_rts is false then
	cts is needed only when byPktType == PK_TYPE_11GB || PK_TYPE_11GA.
	none no rts/cts other byPktTypes.

This allow the joining of pointers pvRTS/pvCTS in to single pointer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only one of vnt_rts*/vnt_cts* structures are accessed at any one time.

structures vnt_cts and vnt_cts_fb are members of union vnt_tx_data_head.

Create pointer union head and point structures to the correct member.

Point the union to pvCTS.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s_vFillCTSHead is only called when byPktType == PK_TYPE_11GB ||
byPktType == PK_TYPE_11GA so remove unnecessary if on byPktType.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

byFBOption == AUTO_FB_NONE (0) is the same as PK_TYPE_11B

Reverse if condition to break and allow fall through.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allowing fall through where necessary.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch edits the vaddr variable in dgnc_tty_init.
The variable gets set to board_t->re_map_membase. A
previous patch changed the re_map_membase variable's
marker and type. This patch makes sure that the
changes are consistent and that it doesn't cause
sparse warnings.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds a marker to neo_read_eeprom function's
base parameter.

It removes these warnings found in neo.c:

warning: incorrect type in argument 1 (different address spaces)
  expected unsigned char *base
  got unsigned char [noderef] [usertype] <asn:2>*re_map_membase
warning: incorrect type in argument 2 (different address spaces)
  expected void volatile [noderef] <asn:2>*addr
  got unsigned char *

These warnings happen because this function gets
called with a board_t->re_map_base variable. A previous
patch added the __iomem marker to this variable. This
patch ensures that the changes are consistent.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes cls_vpd function's re_map_vpdbase variable
type and marker.

It removes these warnings found in cls.c:

warning: incorrect type in assignment (different address spaces)
  expected unsigned char [usertype] *re_map_vpdbase
  got void [noderef] <asn:2>*
warning: incorrect type in argument 1 (different address spaces)
  expected void const volatile [noderef] <asn:2>*addr
  got unsigned char [usertype] *
warning: incorrect type in argument 1 (different address spaces)
  expected void volatile [noderef] <asn:2>*addr
  got unsigned char [usertype] *re_map_vpdbase

The variables passed to readb needs to be of type u8
with a __iomem marker. re_map_vpdbase is passed into
readb in the code.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes the board_t->re_map_membase variable
type and marker.

It removes these warnings found in the neo.c,
driver.c and cls.c files:

warning: incorrect type in argument 1 (different address spaces)
  expected void const volatile [noderef] <asn:2>*addr
  got unsigned char volatile *<noident>
warning: incorrect type in argument 2 (different address spaces)
  expected void volatile [noderef] <asn:2>*addr
  got unsigned char volatile *<noident>

The variables passed to readb and writeb need to
be of type u8 with a __iomem marker. These warnings
were popping up everytime the readb and writeb
functions were called with a
board_t->re_map_membase variable.

The change made to the driver.h file adds the marker
and changes the variable type.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes these warnings found in the neo.c file:

warning: incorrect type in argument 1 (different address spaces)
  expected void const volatile [noderef] <asn:2>*addr
  got unsigned char volatile *<noident>
warning: incorrect type in argument 2 (different address spaces)
  expected void volatile [noderef] <asn:2>*addr
  got unsigned char volatile *<noident>

The variables passed to readb and writeb need to
be of type u8 with a __iomem marker. These warnings
were popping up everytime the readb and writeb
functions were called with a neo_uart_struct variable.

The change made to the driver.h file adds the marker
to the neo_uart_struct and the changes in neo.h
changes the variables' types.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes these sparse warnings found in the cls.c file:

warning: incorrect type in argument 1 (different address spaces)
  expected void const volatile [noderef] <asn:2>*addr
  got unsigned char volatile *<noident>
warning: incorrect type in argument 2 (different address spaces)
  expected void volatile [noderef] <asn:2>*addr
  got unsigned char volatile *<noident>

The variables passed to readb and writeb need to
be of type u8 with a __iomem marker. These warnings
were popping up everytime the readb and writeb
functions were called with a cls_uart_struct variable.

The change made to the driver.h file adds the marker
to the cls_uart_struct and the changes in cls.h
changes its variables' types.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's easier to audit the sysfs files if they use the RO/RW macros, so
convert the usbip code to them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board name for "comedi_bond" is constructed from a space-separated
list of items of the form "minor:subdevice" where "minor" is a minor
device number and "subdevice" is a subdevice number.  Currently, all the
"minor" device numbers are for the "comedi_bond" device itself and the
"subdevice" numbers are for the bonded devices.  It makes makes more
sense for the "minor" device numbers to come from the bonded devices as
well so that the string is a list of bonded "minor:subdevice" pairs.
Fix it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`do_dev_config()` is called from the comedi 'attach' handler,
`bonding_attach()`.  The device private data structure contains a
dynamically allocated array of pointers to "bonded" device structures
which grows during the `do_dev_config()` call.  The length of this array
is in `devpriv->ndevs`.  It currently uses a local function `realloc()`
to allocate a new array, copy the old contents over and free the old
array.  It should be more efficient to use `krealloc()` as it may be
able to use slack space at the end of the previous array and avoid a
copy.

The old `realloc()` function always freed the old buffer which meant
that if it failed to allocate the new buffer it would lose the contents
of the old buffer.  Unfortunately, that contained pointers to more
dynamically allocated memory, leading to a memory leak.  If `krealloc()`
fails, keep the old buffer and avoid the memory leak.  The
aforementioned pointers to more dynamically allocated memory will be
cleaned up by the 'detach' handler, `bonding_detach()` which will be
called by the comedi core as a consequence of `krealloc()` failing in
`do_dev_config()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If a DIO subdevice has more than 32 channels, its 'insn_bits' handler is
supposed to take account of the base channel from
`CR_CHAN(insn->chanspec)`.  (The comedi core will adjust the base
channel to 0 and shift the mask and data to compensate if the subdevice
has less than or equal to 32 channels.)  The "comedi_bond" driver
currently ignores the base channel and assumes it is 0.

Replace `comedi_dio_bitfield()` in the "kcomedilib" module with
`comedi_dio_bitfield2()` that takes account of the base channel, and
rewrite the "comedi_bond" driver's 'insn_bits' handler
(`bonding_dio_insn_bits()`) to take account of the base channel and use
the new function.

No other modules use `comedi_dio_bitfield()` so it is safe to replace it
with `comedi_dio_bitfield2()`.  The name follows that of the equivalent
function in the user-space comedilib.  If the base channel is non-zero
and the subdevice has less than or equal to 32 channels it needs to
adjust things in the same way as the comedi core (same as `parse_insn()`
in "comedi_fops.c") due to most drivers ignoring the base channel.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DIO subdevice of the "comedi_bond" device attempts to remember the
directions of DIO channels itself in the `io_bits` member of the
subdevice, but that is only large enough for the first 32 channels and
it might not be accurate anyway as changing the direction of one channel
may have affected a whole group of channels and we have no idea of the
initial directions before the "bonded" device was linked to the the
"comedi_bond" device.  It would be better to ask the bonded device for
this information when handling a `INSN_CONFIG_DIO_QUERY` configuration
instruction.  Add new function `comedi_dio_get_config()` to the
"kcomedilib" module to allow us to get the DIO direction of a channel
and use it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `while` loop in `bonding_detach()` doesn't need to check
`devpriv->devs` each time round the loop.  Move the test outside the
loop.  The enclosing `if (devpriv)` can be changed to `if (devpriv &&
devpriv->devs)` as everything in this `if` statement is associated with
`devpriv->devs` anyway.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core will free `dev->private` if it is non-NULL after calling
the "detach" handler (`bonding_detach()`), so don't bother freeing it in
`bonding_detach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `subdev_type` member of `struct bonded_device` is set but not used.
Remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The private data structure (`struct comedi_bond_private`) for the
overall "comedi_bond" device maps each channel individually to a pointer
to the `struct bonded_device` it belongs to via array member
`chan_id_dev_map[MAX_CHANS]`. This speeds up look-ups from channel
number to bonded device a bit, but the length of the array used to look
this up is currently fixed at `MAX_CHANS` (256) and there are no
overflow checks when filling the array.

In practice, there will only be a few bonded devices (actually bonded
subdevices) and it is practical to just skip through the list until we
reach the one containing the desired channel.

The only place where the bonded device is looked up from the channel
number is in `bonding_dio_insn_config()`.  Change it to do the look-up
by skipping through the list of bonded devices and remove the
`chan_id_dev_map[]` member.  The `chanid_offset` member of `struct
bonded_device` is also no longer needed as the value can be derived
while skipping through the list of bonded devices, so remove that member
as well.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`do_dev_config()` currently records the comedi minor devices it has
opened by setting `devs_opened[minor]` to the pointer returned by
`comedi_open()`.  This is checked to avoid opening the same minor device
twice.  The pointer values in `devs_opened[]` aren't needed; we only
need to record which minor device numbers are being used.  Change
`devs_opened` to a bitmap (declared with `DECLARE_BITMAP()`) of length
`COMEDI_NUM_BOARD_MINORS` as the minor device numbers are range-checked
to fit in a bitmap of this length.  Use `test_and_set_bit()` to record
the minor device numbers we attempt to open with `comedi_open()`.

`bonding_detach()` calls `comedi_close()` to close the comedi minor
devices.  Since the minor device numbers may be repeated in its list of
bonded subdevices, it currently uses a simple `unsigned long
devs_closed` variable as a bitmap to keep track of which minor device
numbers it has already closed to avoid closing them twice.  As a single
`unsigned long` consists of less than `COMEDI_NUM_BOARD_MINORS` bits on
a 32-bit machine, change `devs_closed to a bitmap of this length using
`DECLARE_BITMAP()` and use `test_and_set_bit()` to avoid calling
`comedi_close()` more than once for each minor device number in use.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`bonding_attach()` is the comedi "attach" handler for the driver.  Any
non-negative return value is treated as successful, but 0 is the
preferred return value on success.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change `do_dev_config()` to return an error code on failure and 0 on
success, instead of 0 on failure and 1 on success.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `char file[]` variable in `do_dev_config()` doesn't need to be
initialized as it gets overwritten with a `snprintf()`.  It just needs
to be long enough.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Omit the fanciful prose from the MODULE_DESCRIPTION() line and combine
concantenated string literals.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat some comments according to CodingStyle and remove some comments
inherited from the comedi 'skel' example driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DGNC is based on PCI, so need add related dependency, or when compiled
with PCI disabled, it will be fail.

The related error (randconfig for PCI disabled under s390):

  drivers/staging/dgnc/dgnc_cls.c:1394:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]
  drivers/staging/dgnc/dgnc_cls.c:1407:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]

Cc: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in comments and debug messages.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

struct pt_regs pointer is no longer passed as a irq handler
argument. and also remove unnecessary macros.
Signed-off-by: navin patidar <navinp@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>