Before this commit sensor_hub_input_attr_get_raw_value() failed to take
the signedness of 16 and 8 bit values into account, returning e.g.
65436 instead of -100 for the z-axis reading of an accelerometer.

This commit adds a new is_signed parameter to the function and makes all
callers pass the appropriate value for this.

While at it, this commit also fixes up some neighboring lines where
statements were needlessly split over 2 lines to improve readability.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Currently, we enable the device before we enable the device trigger. At
high frequencies, this can cause interrupts that don't yet have a poll
function associated with them and are thus treated as spurious. At high
frequencies with level interrupts, this can even cause an interrupt storm
of repeated spurious interrupts (~100,000 on my Beagleboard with the
LSM9DS1 magnetometer). If these repeat too much, the interrupt will get
disabled and the device will stop functioning.

To prevent these problems, enable the device prior to enabling the device
trigger, and disable the divec prior to disabling the trigger. This means
there's no window of time during which the device creates interrupts but we
have no trigger to answer them.

Fixes: 90efe055 ("iio: st_sensors: harden interrupt handling")
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Tested-by: Denis Ciocca <denis.ciocca@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Pull nfsd updates from Bruce Fields:
 "Olga added support for the NFSv4.2 asynchronous copy protocol. We
  already supported COPY, by copying a limited amount of data and then
  returning a short result, letting the client resend. The asynchronous
  protocol should offer better performance at the expense of some
  complexity.

  The other highlight is Trond's work to convert the duplicate reply
  cache to a red-black tree, and to move it and some other server caches
  to RCU. (Previously these have meant taking global spinlocks on every
  RPC)

  Otherwise, some RDMA work and miscellaneous bugfixes"

* tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linux: (30 commits)
  lockd: fix access beyond unterminated strings in prints
  nfsd: Fix an Oops in free_session()
  nfsd: correctly decrement odstate refcount in error path
  svcrdma: Increase the default connection credit limit
  svcrdma: Remove try_module_get from backchannel
  svcrdma: Remove ->release_rqst call in bc reply handler
  svcrdma: Reduce max_send_sges
  nfsd: fix fall-through annotations
  knfsd: Improve lookup performance in the duplicate reply cache using an rbtree
  knfsd: Further simplify the cache lookup
  knfsd: Simplify NFS duplicate replay cache
  knfsd: Remove dead code from nfsd_cache_lookup
  SUNRPC: Simplify TCP receive code
  SUNRPC: Replace the cache_detail->hash_lock with a regular spinlock
  SUNRPC: Remove non-RCU protected lookup
  NFS: Fix up a typo in nfs_dns_ent_put
  NFS: Lockless DNS lookups
  knfsd: Lockless lookup of NFSv4 identities.
  SUNRPC: Lockless server RPCSEC_GSS context lookup
  knfsd: Allow lockless lookups of the exports
  ...

Pull cramfs fixes from Nicolas Pitre:
 "Make the Cramfs code more robust against filesystem corruptions, plus
  trivial indentation fixes"

* tag 'cramfs_fixes' of git://git.linaro.org/people/nicolas.pitre/linux:
  Cramfs: trivial whitespace fixes
  Cramfs: fix abad comparison when wrap-arounds occur

Signed-off-by: Nicolas Pitre <nico@linaro.org>

It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buffer size test.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org

Pull tracing updates from Steven Rostedt:
 "The biggest change here is the updates to kprobes

  Back in January I posted patches to create function based events.
  These were the events that you suggested I make to allow developers to
  easily create events in code where no trace event exists. After
  posting those changes for review, it was suggested that we implement
  this instead with kprobes.

  The problem with kprobes is that the interface is too complex and
  needs to be simplified. Masami Hiramatsu posted patches in March and
  I've been playing with them a bit. There's been a bit of clean up in
  the kprobe code that was inspired by the function based event patches,
  and a couple of enhancements to the kprobe event interface.

   - If the arch supports it (we added support for x86), you can place a
     kprobe event at the start of a function and use $arg1, $arg2, etc
     to reference the arguments of a function. (Before you needed to
     know what register or where on the stack the argument was).

   - The second is a way to see array of events. For example, if you
     reference a mac address, you can add:

	echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events

     And this will produce:

	mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec}

  Other changes include

   - Exporting trace_dump_stack to modules

   - Have the stack tracer trace the entire stack (stop trying to remove
     tracing itself, as we keep removing too much).

   - Added support for SDT in uprobes"

[ SDT - "Statically Defined Tracing" are userspace markers for tracing.
  Let's not use random TLA's in explanations unless they are fairly
  well-established as generic (at least for kernel people) - Linus ]

* tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
  tracing: Have stack tracer trace full stack
  tracing: Export trace_dump_stack to modules
  tracing: probeevent: Fix uninitialized used of offset in parse args
  tracing/kprobes: Allow kprobe-events to record module symbol
  tracing/kprobes: Check the probe on unloaded module correctly
  tracing/uprobes: Fix to return -EFAULT if copy_from_user failed
  tracing: probeevent: Add $argN for accessing function args
  x86: ptrace: Add function argument access API
  tracing: probeevent: Add array type support
  tracing: probeevent: Add symbol type
  tracing: probeevent: Unify fetch_insn processing common part
  tracing: probeevent: Append traceprobe_ for exported function
  tracing: probeevent: Return consumed bytes of dynamic area
  tracing: probeevent: Unify fetch type tables
  tracing: probeevent: Introduce new argument fetching code
  tracing: probeevent: Remove NOKPROBE_SYMBOL from print functions
  tracing: probeevent: Cleanup argument field definition
  tracing: probeevent: Cleanup print argument functions
  trace_uprobe: support reference counter in fd-based uprobe
  perf probe: Support SDT markers having reference counter (semaphore)
  ...

Pull tracing fixes from Steven Rostedt:
 "Masami had a couple more fixes to the synthetic events. One was a
  proper error return value, and the other is for the self tests"

* tag 'trace-v4.19-rc8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests/ftrace: Fix synthetic event test to delete event correctly
  tracing: Return -ENOENT if there is no target synthetic event

Pull xen fixes from Juergen Gross:
 "Only several small fixes and cleanups this time"

* tag 'for-linus-4.20a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: drop writing error messages to xenstore
  xen/pvh: don't try to unplug emulated devices
  add myself as reviewer for Xen support in Linux
  xen: remove redundant 'default n' from Kconfig
  xen/balloon: Support xend-based toolstack
  xen/pvh: increase early stack size
  xen: make xen_qlock_wait() nestable
  xen: fix race in xen_qlock_wait()
  xen/balloon: Grammar s/Is it/It is/
  xen: Make XEN_BACKEND selectable by DomU

Pull more ACPI updates from Rafael Wysocki:
 "Rework the handling of the P-unit semaphore on Intel Baytrail and
  Cherrytrail systems to avoid race conditions and excessive overhead
  related to it (Hans de Goede)"

* tag 'acpi-4.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: xpower: Add depends on IOSF_MBI to Kconfig entry
  i2c: designware: Cleanup bus lock handling
  ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write
  x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code

Pull more power management updates from Rafael Wysocki:
 "These remove a questionable heuristic from the menu cpuidle governor,
  fix a recent build regression in the intel_pstate driver, clean up ARM
  big-Little support in cpufreq and fix up hung task watchdog's
  interaction with system-wide power management transitions.

  Specifics:

   - Fix build regression in the intel_pstate driver that doesn't build
     without CONFIG_ACPI after recent changes (Dominik Brodowski).

   - One of the heuristics in the menu cpuidle governor is based on a
     function returning 0 most of the time, so drop it and clean up the
     scheduler code related to it (Daniel Lezcano).

   - Prevent the arm_big_little cpufreq driver from being used on ARM64
     which is not suitable for it and drop the arm_big_little_dt driver
     that is not used any more (Sudeep Holla).

   - Prevent the hung task watchdog from triggering during resume from
     system-wide sleep states by disabling it before freezing tasks and
     enabling it again after they have been thawed (Vitaly Kuznetsov)"

* tag 'pm-4.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  kernel: hung_task.c: disable on suspend
  cpufreq: remove unused arm_big_little_dt driver
  cpufreq: drop ARM_BIG_LITTLE_CPUFREQ support for ARM64
  cpufreq: intel_pstate: Fix compilation for !CONFIG_ACPI
  cpuidle: menu: Remove get_loadavg() from the performance multiplier
  sched: Factor out nr_iowait and nr_iowait_cpu

Pull more btrfs updates from David Sterba:
 "This contains a few minor updates and fixes that were under testing or
  arrived shortly after the merge window freeze, mostly stable material"

* tag 'for-4.20-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix use-after-free when dumping free space
  Btrfs: fix use-after-free during inode eviction
  btrfs: move the dio_sem higher up the callchain
  btrfs: don't run delayed_iputs in commit
  btrfs: fix insert_reserved error handling
  btrfs: only free reserved extent if we didn't insert it
  btrfs: don't use ctl->free_space for max_extent_size
  btrfs: set max_extent_size properly
  btrfs: reset max_extent_size properly
  MAINTAINERS: update my email address for btrfs
  btrfs: delayed-ref: extract find_first_ref_head from find_ref_head
  Btrfs: fix deadlock when writing out free space caches
  Btrfs: fix assertion on fsync of regular file when using no-holes feature
  Btrfs: fix null pointer dereference on compressed write path error

* pm-cpuidle:
  cpuidle: menu: Remove get_loadavg() from the performance multiplier
  sched: Factor out nr_iowait and nr_iowait_cpu

* pm-cpufreq:
  cpufreq: remove unused arm_big_little_dt driver
  cpufreq: drop ARM_BIG_LITTLE_CPUFREQ support for ARM64
  cpufreq: intel_pstate: Fix compilation for !CONFIG_ACPI

Pull rpmsg updates from Bjorn Andersson:
 "This migrates rpmsg_char to use read/write_iter to allow being
  operated using aio, removes the message size alignment requirements
  from glink, closes a potential memory leak in SMD and switches to
  %pOFn for printing device_node names"

* tag 'rpmsg-v4.20' of git://github.com/andersson/remoteproc:
  rpmsg: glink: smem: Support rx peak for size less than 4 bytes
  rpmsg: smd: fix memory leak on channel create
  rpmsg: glink: Remove chunk size word align warning
  rpmsg: Convert to using %pOFn instead of device_node.name
  rpmsg: char: Migrate to iter versions of read and write

Pull remoteproc updates from Bjorn Andersson:
 "This contains a series of patches that reworks the memory carveout
  handling in remoteproc, in order to allow this to be reused for
  statically allocated memory regions to be used for e.g. firmware.

  It adds support for audio DSP (both TZ-assisted and non-TZ assisted)
  and compute DSP on Qualcomm SDM845, TZ-assisted audio DSP, compute DSP
  and WiFi processor on Qualcomm QCS404 and through some renaming of the
  drivers cleans up the naming situation.

  Finally support for custom coreudmp segment handlers is added and is
  used in the Qualcomm modem remoteproc driver to gather memory dumps of
  the firmware"

* tag 'rproc-v4.20' of git://github.com/andersson/remoteproc: (36 commits)
  remoteproc: qcom: q6v5-mss: Register segments/dumpfn for coredump
  remoteproc: qcom: q6v5-mss: Add custom dump function for modem
  remoteproc: qcom: q6v5-mss: Refactor mba load/unload sequence
  remoteproc: Add mechanism for custom dump function assignment
  remoteproc: Introduce custom dump function for each remoteproc segment
  remoteproc: modify vring allocation to rely on centralized carveout allocator
  remoteproc: qcom: q6v5: shore up resource probe handling
  remoteproc: qcom: qcom_q6v5_adsp: Fix some return value check
  remoteproc: modify rproc_handle_carveout to support pre-registered region
  remoteproc: add helper function to check carveout device address
  remoteproc: add helper function to allocate rproc_mem_entry from reserved memory
  remoteproc: add alloc ops in rproc_mem_entry struct
  remoteproc: introduce rproc_find_carveout_by_name function
  remoteproc: introduce rproc_add_carveout function
  remoteproc: add helper function to allocate and init rproc_mem_entry struct
  remoteproc: add name in rproc_mem_entry struct
  remoteproc: add release ops in rproc_mem_entry struct
  remoteproc: add rproc_va_to_pa function
  remoteproc: configure IOMMU only if device address requested
  remoteproc: qcom: q6v5-mss: add SCM probe dependency
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "A couple of platforms change hands in the MAINTAINERS file:

   - Linus Walleij lists himself for the ARM Reference platforms:
     versatile, vexpress, integrator and realview. He has been the main
     contributor for these for a while, and makes it official now.

   - Vladimir Zapolskiy takes over the LPC18xx platform from Joachim
     Eastwood

   - Manivannan Sadhasivam becomes a secondary maintainer for the
     Actions Semi machines

   - Nicolas Ferre lists updates the MAINTAINER listing for the AT91
     platform: Ludovic Desroches is now a co-maintainer for the
     platform, and several other people (Claudiu Beznea, Cristian
     Birsan, Eugen Hristev, Codrin Ciubotariu) take over individual
     device drivers.

  Thanks everyone for working on this, and welcome to the new
  maintainers!

  The "virt" platform on qemy or kvm can now be used in big-endian mode
  without additional tricks, thanks to Jason Donenfeld.

  Once again, we gain support for another NXP i.MX6 variant, this time
  it's the i.MX 6ULZ 32-bit single-core version.

  On arm64, we add support for two SoCs from Renesas: RZ/G2E (r8a774c0)
  and RZ/G2M (r8a774a1). These are described as microcontrollers on the
  manufacturer website, but appear to be rather powerful. The RZ/G2M is
  used on the reference board for the CIP Super Long Term Support (SLTS)
  Linux Kernels"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  MAINTAINERS: Assign myself as a maintainer of ARM/LPC18XX architecture
  arm64: exynos: Enable generic power domain support
  MAINTAINERS: remove non-exsiting email address of Baoyou
  MAINTAINERS: fix pattern in ARM/Synaptics berlin SoC section
  MAINTAINERS: Drop dt-bindings/genpd/k2g.h
  ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms
  arm64: actions: Enable PINCTRL in platforms Kconfig
  MAINTAINERS: Add entry for Actions Semi Owl SoCs DMA driver
  MAINTAINERS: Add entry for Actions Semiconductor Owl I2C driver
  MAINTAINERS: Update clock binding entry for Actions Semi Owl SoCs
  ARM: imx: add i.mx6ulz msl support
  ARM: Assume maintainership of ARM reference designs
  ARM: support big-endian for the virt architecture
  MAINTAINERS: sdhci: move the Microchip entry to proper location
  MAINTAINERS: move former ATMEL entries to proper MICROCHIP location
  MAINTAINERS: remove the / ATMEL string from MICROCHIP entries
  MAINTAINERS: iio: add co-maintainer to SAMA5D2-compatible ADC driver
  MAINTAINERS: pwm: add entry for Microchip pwm driver
  MAINTAINERS: dmaengine: add files to Microchip dma entry
  MAINTAINERS: USB: change maintainer for Microchip USBA gadget driver
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "The most noteworthy SoC driver changes this time include:

   - The TEE subsystem gains an in-kernel interface to access the TEE
     from device drivers.

   - The reset controller subsystem gains a driver for the Qualcomm
     Snapdragon 845 Power Domain Controller.

   - The Xilinx Zynq platform now has a firmware interface for its
     platform management unit. This contains a firmware "ioctl"
     interface that was a little controversial at first, but the version
     we merged solved that by not exposing arbitrary firmware calls to
     user space.

   - The Amlogic Meson platform gains a "canvas" driver that is used for
     video processing and shared between different high-level drivers.

  The rest is more of the usual, mostly related to SoC specific power
  management support and core drivers in drivers/soc:

   - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
     features related to power and reset control.

   - The Mediatek mt8183 and mt6765 SoC platforms gain support for their
     respective power management chips.

   - A new driver for NXP i.MX8, which need a firmware interface for
     power management.

   - The SCPI firmware interface now contains support estimating power
     usage of performance states

   - The NVIDIA Tegra "pmc" driver gains a few new features, in
     particular a pinctrl interface for configuring the pads.

   - Lots of small changes for Qualcomm, in particular the "smem" device
     driver.

   - Some cleanups for the TI OMAP series related to their sysc
     controller.

  Additional cleanups and bugfixes in SoC specific drivers include the
  Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits)
  firmware: tegra: bpmp: Implement suspend/resume support
  drivers: clk: Add ZynqMP clock driver
  dt-bindings: clock: Add bindings for ZynqMP clock driver
  firmware: xilinx: Add zynqmp IOCTL API for device control
  Documentation: xilinx: Add documentation for eemi APIs
  MAINTAINERS: imx: include drivers/firmware/imx path
  firmware: imx: add misc svc support
  firmware: imx: add SCU firmware driver support
  reset: Fix potential use-after-free in __of_reset_control_get()
  dt-bindings: arm: fsl: add scu binding doc
  soc: fsl: qbman: add interrupt coalesce changing APIs
  soc: fsl: bman_portals: defer probe after bman's probe
  soc: fsl: qbman: Use last response to determine valid bit
  soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
  soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
  soc: fsl: qbman: Check if CPU is offline when initializing portals
  reset: qcom: PDC Global (Power Domain Controller) reset controller
  dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
  reset: Grammar s/more then once/more than once/
  bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "The defconfig changes are split out from the rest again. This time we
  have a number of changes for NXP i.MX and Renesas, including a cleanup
  of old options.

  Some smaller changes are for Socionext Uniphier, Allwinner, Qualcomm,
  Rockchip, Renesas, AT91, Hisilicon, and STM32. All of these just
  enable platform specific device drivers"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
  arm64: defconfig: Enable SERIAL_8250_OMAP
  arm64: defconfig: Enable TI_SCI related configs
  ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL
  ARM: imx_v4_v5_defconfig: Remove unneeded options
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  ARM: mxs_defconfig: Remove unneeded options
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v6_v7_defconfig: Remove unneeded options
  ARM: imx_v6_v7_defconfig: Re-sync defconfig
  ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default
  ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot
  ARM: imx_v6_v7_defconfig: add CONFIG_FW_LOADER_USER_HELPER
  ARM: imx_v6_v7_defconfig: Select CONFIG_SENSORS_MC13783_ADC
  ARM: multi_v7_defconfig: enable CONFIG_MMC_UNIPHIER
  arm64: defconfig: enable CONFIG_MMC_UNIPHIER
  ARM: multi_v7_defconfig: Enable USB phys for UniPhier SoCs
  arm64: defconfig: Enable USB phys for UniPhier SoCs
  arm64: defconfig: enable Rockchip Innosilicon hdmiphy
  arm64: defconfig: Enable PCIEPORTBUS
  arm64: defconfig: enable HiSilicon HNS3 driver
  ...

Pull ARM SoC device tree updates from Arnd Bergmann:
 "There are close to 800 indivudal changesets in this branch again,
  which feels like a lot. There are particularly many changes for the
  NVIDIA Tegra platform this time, in fact more than it has seen in the
  two years since the v4.9 merge window. Aside from this, it's been
  fairly normal, with lots of changes going into Renesas R-CAR, NXP
  i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP.

  Most of the changes are for adding new features into existing boards,
  for brevity I'm only mentioning completely new machines and SoCs here.
  For the first time I think we have (slightly) more new 64-bit hardware
  than 32-bit:

  Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
  computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a
  minor variation of the motherboards of the GTA04 phone, see
  https://shop.goldelico.com/wiki.php?page=GTA04A5

  Clearfog is a nice little board for quad-core Marvell Armada 8040
  network processor, see
  https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/

  Two additional server boards come with the Aspeed baseboard management
  controllers: Stardragon4800 is an arm64 reference platform made by HXT
  (based on Qualcomm's server chips), and TiogaPass is an Open Compute
  mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the
  BMC.

  NXP i.MX usually sees a lot of new boards each release. This time
  there we only add one minor variant: ConnectCore 6UL SBC Pro uses the
  same SoM design as the ConnectCore 6UL SBC Express added later.
  However, there is a new chip, the i.MX6ULZ, which is an even smaller
  variant of the i.MX6ULL, with features removed. There is also support
  for the reference board design, the i.MX6ULZ 14x14 EVK.

  A new Raspberry Pi variant gets added, this one is the CM3 compute
  module based on bcm2837, it was launched in early 2017 but only now
  added to the kernel, both as 32-bit and as 64-bit files, as we tend to
  do for Raspberry Pi.

  On the Allwinner side, everything is again about cheap development
  boards, usually of the "Fruit Pi" variety. The new ones this time are:
   - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
   - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
   - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
   - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
  The last one of these is now a 64-bit version of the earlier Banana Pi
  M2+ H3, with the same board layout.

  Similarly, for Rockchips, get get another variant of the 32-bit Asus
  Tinker board, the model 'S' based on rk3288, and three now boards
  based on the popular RK3399 chip:
   - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
   - Rock960: https://www.96boards.org/product/rock960/
   - RockPro64: https://www.pine64.org/?page_id=61454
  These are all quite powerful boards with lots of RAM and I/O, and the
  RK3399 is the same chip used in several Chromebooks. Finally, we get
  support for the PX30 (aka rk3326) chip, which is based on the low-end
  64-bit Cortex-A35 CPU core. So far, only the evaluation board is
  supported.

  One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is
  based on the MT7622 WiFi router platform, and the first product I've
  seen with a 64-bit Mediatek chip in that market:
  http://www.banana-pi.org/r64.html

  For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
  development board, which are similar to the Hi3660 and Hikey 360
  respectively, but add support for an NPU.

  Amlogic gets initial support for the Meson-G12A chip (S905D2), another
  quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit
  side, we gain support for an actual end-user product, the Endless
  Computers Endless Mini based on Meson8b (S805), see
  https://endlessos.com/computers/

  Qualcomm adds support for their MSM8998 SoC and evaluation platform.
  This chip is commonly known as the Snapdragon 835, and is used in
  high-end phones as well as low-end laptops.

  For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
  but no boards for this one. However, we do add boards for the
  previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the
  M3NULCB Starter Kit Pro.

  While we have lots of DT changes for NVIDIA to update the existing
  files, the only board that gets added is the Toradex Colibri T20 on
  Colibri Evaluation Board for the old Tegra2.

  Synaptics add support for their AS370 SoC, which is part of the
  (formerly Marvell) Berlin line of set-top-box chips used e.g. in the
  various Google Chromecast. Only the .dtsi gets added at this point, no
  actual machines"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits)
  ARM: dts: socfgpa: remove ethernet aliases from dtsi
  arm64: dts: stratix10: add ethernet aliases
  dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
  dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
  dt-bindings: iommu: mediatek: Add binding for MT7623
  dt-bindings: clock: mediatek: add support for MT7623
  ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
  ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
  ARM: dts: da850-evm: Enable tca6416 on baseboard
  arm64: dts: uniphier: Add USB2 PHY nodes
  arm64: dts: uniphier: Add USB3 controller nodes
  ARM: dts: uniphier: Add USB2 PHY nodes
  ARM: dts: uniphier: Add USB3 controller nodes
  arm64: dts: meson-axg: s400: disable emmc
  arm64: dts: meson-axg: s400: add missing emmc pwrseq
  arm64: dts: clearfog-gt-8k: add PCIe slot description
  ARM: dts: at91: sama5d4_xplained: even nand memory partitions
  ARM: dts: at91: sama5d3_xplained: even nand memory partitions
  ARM: dts: at91: at91sam9x5cm: even nand memory partitions
  ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
  ...

Pull parisc updates from Helge Deller:
 "Three small patches:

   - A boot fix for A500 machines, crash was caused by the new
     alternative patching code from this merge window (Dave)

   - Change __kernel_suseconds_t to match glibc on 64-bit parisc (Arnd)

   - Use constants instead of hard-coded numbers (me)"

* 'parisc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix A500 boot crash
  parisc: Use LINUX_GATEWAY_SPACE constant in entry.S
  parisc64: change __kernel_suseconds_t to match glibc

Pull i2c updates from Wolfram Sang:
 "I2C has not so much stuff this time. Mostly driver enablement for new
  SoCs, some driver bugfixes, and some cleanups"

* 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (35 commits)
  MAINTAINERS: add maintainer for Renesas RIIC driver
  i2c: sh_mobile: Remove dummy runtime PM callbacks
  i2c: uniphier-f: fix race condition when IRQ is cleared
  i2c: uniphier-f: fix occasional timeout error
  i2c: uniphier-f: make driver robust against concurrency
  i2c: i2c-qcom-geni: Simplify irq handler
  i2c: i2c-qcom-geni: Simplify tx/rx functions
  i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  i2c: mux: mlxcpld: simplify code to reach the adapter
  i2c: mux: ltc4306: simplify code to reach the adapter
  i2c: mux: pca954x: simplify code to reach the adapter
  i2c: core: remove level of indentation in i2c_transfer
  i2c: core: remove outdated DEBUG output
  i2c: zx2967: use core to detect 'no zero length' quirk
  i2c: tegra: use core to detect 'no zero length' quirk
  i2c: qup: use core to detect 'no zero length' quirk
  i2c: omap: use core to detect 'no zero length' quirk
  i2c: Convert to using %pOFn instead of device_node.name
  i2c: brcmstb: Allow enabling the driver on DSL SoCs
  eeprom: at24: fix unexpected timeout under high load
  ...

Pull media updates from Mauro Carvalho Chehab:

 - new dvb frontend driver: lnbh29

 - new sensor drivers: imx319 and imx 355

 - some old soc_camera driver renames to avoid conflict with new
   drivers

 - new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver

 - a new V4L2 frontend for the FWHT codec

 - several other improvements, bug fixes, code cleanups, etc

* tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits)
  media: rename soc_camera I2C drivers
  media: cec: forgot to cancel delayed work
  media: vivid: Support 480p for webcam capture
  media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD
  media: vivid: Add 16-bit bayer to format list
  media: v4l2-tpg-core: Add 16-bit bayer
  media: pvrusb2: replace `printk` with `pr_*`
  media: venus: vdec: fix decoded data size
  media: cx231xx: fix potential sign-extension overflow on large shift
  media: dt-bindings: media: rcar_vin: add device tree support for r8a7744
  media: isif: fix a NULL pointer dereference bug
  media: exynos4-is: make const array config_ids static
  media: cx23885: make const array addr_list static
  media: ivtv: make const array addr_list static
  media: bttv-input: make const array addr_list static
  media: cx18: Don't check for address of video_dev
  media: dw9807-vcm: Fix probe error handling
  media: dw9714: Remove useless error message
  media: dw9714: Fix error handling in probe function
  media: cec: name for RC passthrough device does not need 'RC for'
  ...

printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

In call_xpt_users(), we delete the entry from the list, but we
do not reinitialise it. This triggers the list poisoning when
we later call unregister_xpt_user() in nfsd4_del_conns().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

alloc_init_deleg() both allocates an nfs4_delegation, and
bumps the refcount on odstate. So after this point, we need to
put_clnt_odstate() and nfs4_put_stid() to not leave the odstate
refcount inappropriately bumped.
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Reduce queuing on clients by allowing more credits by default.

64 is the default NFSv4.1 slot table size on Linux clients. This
size prevents the credit limit from putting RPC requests to sleep
again after they have already slept waiting for a session slot.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Since commit ffe1f0df ("rpcrdma: Merge svcrdma and xprtrdma
modules into one"), the forward and backchannel components are part
of the same kernel module. A separate try_module_get() call in the
backchannel code is no longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Similar to a change made in the client's forward channel reply
handler: The xprt_release_rqst_cong() call is not necessary.

Also, release xprt->recv_lock when taking xprt->transport_lock
to avoid disabling and enabling BH's while holding another
spin lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

There's no need to request a large number of send SGEs because the
inline threshold already constrains the number of SGEs per Send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Replace "fallthru" with a proper "fall through" annotation.

Also, add an annotation were it is expected to fall through.

These fixes are part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Use an rbtree to ensure the lookup/insert of an entry in a DRC bucket is
O(log(N)).
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Order the structure so that the key can be compared using memcmp().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Simplify the duplicate replay cache by initialising the preallocated
cache entry, so that we can use it as a key for the cache lookup.

Note that the 99.999% case we want to optimise for is still the one
where the lookup fails, and we have to add this entry to the cache,
so preinitialising should not cause a performance penalty.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The preallocated cache entry is always set to type RC_NOCACHE, and that
type isn't changed until we later call nfsd_cache_update().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Use the fact that the iov iterators already have functionality for
skipping a base offset.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Now that the reader functions are all RCU protected, use a regular
spinlock rather than a reader/writer lock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Clean up the cache code by removing the non-RCU protected lookup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

call_rcu() needs to take a first argument of type (struct rcu_head *).

Fixes: fd497f1e40d9 ("NFS: Lockless DNS lookups")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Enable RCU protected lookup in the legacy DNS resolver.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Enable RCU protected lookups of the NFSv4 idmap.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>