- 21 Jan, 2020 20 commits
-
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: misc updates for -net-next This series includes some misc updates for the HNS3 ethernet driver. [patch 1] adds a limitation for the error log in the hns3_clean_tx_ring(). [patch 2] adds a check for pfmemalloc flag before reusing pages since these pages may be used some special case. [patch 3] assigns a default reset type 'HNAE3_NONE_RESET' to VF's reset_type after initializing or reset. [patch 4] unifies macro HCLGE_DFX_REG_TYPE_CNT's definition into header file. [patch 5] refines the parameter 'size' of snprintf() in the hns3_init_module(). [patch 6] rewrites a debug message in hclge_put_vector(). [patch 7~9] adds some cleanups related to coding style. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
This patch removes some unnecessary return value assignments, some duplicated printing in the caller, refines the judgment of 0 and uses le16_to_cpu to replace __le16_to_cpu. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
All kmalloc-based functions print enough information on failures. So this patch removes the log in hclge_get_dfx_reg() when returns ENOMEM. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guangbin Huang authored
This patch deletes some unnecessary blank lines and spaces to clean up code, and in hclgevf_set_vlan_filter() moves the comment to the front of hclgevf_send_mbx_msg(). Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yonglong Liu authored
When gets vector fails, hclge_put_vector() should print out the vector instead of vector_id in the log and return the wrong vector_id to its caller. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guojia Liao authored
The function snprintf() writes at most size bytes (including the terminating null byte ('\0') to str. Now, We can guarantee that the parameter of size is lager than the length of str to be formatting including its terminating null byte. So it's unnecessary to minus 1 for the input parameter 'size'. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guojia Liao authored
Macro HCLGE_GET_DFX_REG_TYPE_CNT in hclge_dbg_get_dfx_bd_num() and macro HCLGE_DFX_REG_BD_NUM in hclge_get_dfx_reg_bd_num() have the same meaning, so just defines HCLGE_GET_DFX_REG_TYPE_CNT in hclge_main.h. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
reset_type means what kind of reset the driver is handling now, so after initializing or reset, the reset_type of VF should be set to HNAE3_NONE_RESET, otherwise, this unknown default value may be a little misleading when the device is running. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
HNS3 driver allocates pages for DMA with dev_alloc_pages(), which calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case of OOM condition, HNS3 can get pages with pfmemalloc flag set. So do not reuse the pages with pfmemalloc flag set because those pages are reserved for special cases, such as low memory case. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
The error log printed by netdev_err() in the hns3_clean_tx_ring() may spam the kernel log. This patch uses hns3_rl_err() to ratelimit the error log in the hns3_clean_tx_ring(). Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin Schiller authored
o call skb_reset_network_header() before hdlc->xmit() o change skb proto to HDLC (0x0019) before hdlc->xmit() o call dev_queue_xmit_nit() before hdlc->xmit() This changes make it possible to trace (tcpdump) outgoing layer2 (ETH_P_HDLC) packets Additionally call skb_reset_network_header() after each skb_push() / skb_pull(). Signed-off-by:
Martin Schiller <ms@dev.tdt.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin Schiller authored
This enables you to configure mode (DTE/DCE), Modulo, Window, T1, T2, N2 via sethdlc (which needs to be patched as well). Signed-off-by:
Martin Schiller <ms@dev.tdt.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hans Wippel authored
The current flags of the SMC_PNET_GET command only allow privileged users to retrieve entries from the pnet table via netlink. The content of the pnet table may be useful for all users though, e.g., for debugging smc connection problems. This patch removes the GENL_ADMIN_PERM flag so that unprivileged users can read the pnet table. Signed-off-by:
Hans Wippel <ndev@hwipl.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: add new version of phy_do_ioctl and convert suitable drivers We just added phy_do_ioctl, but it turned out that we need another version of this function that doesn't check whether net_device is running. So rename phy_do_ioctl to phy_do_ioctl_running and add a new version of phy_do_ioctl. Eventually convert suitable drivers to use phy_do_ioctl. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Convert suitable network drivers to use phy_do_ioctl. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Add a new version of phy_do_ioctl that doesn't check whether net_device is running. It will typically be used if suitable drivers attach the PHY in probe already. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
We just added phy_do_ioctl, but it turned out that we need another version of this function that doesn't check whether net_device is running. So rename phy_do_ioctl to phy_do_ioctl_running. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chen Zhou authored
snprintf returns the number of bytes that would be written, which may be greater than the the actual length to be written. Here use extra code to handle this. scnprintf returns the number of bytes that was actually written, just use scnprintf to simplify the code. Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chen Zhou authored
The return value of snprintf may be greater than the size of HNS3_DBG_READ_LEN, use scnprintf instead in hns3_dbg_cmd_read. Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdmaDavid S. Miller authored
Leon Romanovsky says: ==================== Use ODP MRs for kernel ULPs The following series extends MR creation routines to allow creation of user MRs through kernel ULPs as a proxy. The immediate use case is to allow RDS to work over FS-DAX, which requires ODP (on-demand-paging) MRs to be created and such MRs were not possible to create prior this series. The first part of this patchset extends RDMA to have special verb ib_reg_user_mr(). The common use case that uses this function is a userspace application that allocates memory for HCA access but the responsibility to register the memory at the HCA is on an kernel ULP. This ULP acts as an agent for the userspace application. The second part provides advise MR functionality for ULPs. This is integral part of ODP flows and used to trigger pagefaults in advance to prepare memory before running working set. The third part is actual user of those in-kernel APIs. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 20 Jan, 2020 13 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Adjust SPAN egress mirroring buffer size handling for Spectrum-2 Jiri says: For Spectrum-2 the computation of SPAN egress mirroring buffer uses a different formula. On top of MTU it needs also current port speed. Fix the computation and also trigger the buffer size set according to PUDE event, which happens when port speed changes. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
When PUDE event is handled and the link is up, update the port SPAN buffer size according to the current speed. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
For SPAN egress mirroring buffer size, it is needed to use a different formula for Spectrum and Spectrum-2. Move the buffer size computation to ops and implement new formula for Spectrum-2. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Avoid duplication of code that is doing buffsize update and put it into a separate helper function. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Currently PTP code queries directly PTYS register for port speed from work scheduled upon PUDE event. Since the speed needs to be used for SPAN buffer size computation as well, push the code into a separate helper. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: add generic ndo_do_ioctl handler phy_do_ioctl A number of network drivers has the same glue code to use phy_mii_ioctl as ndo_do_ioctl handler. So let's add such a generic ndo_do_ioctl handler to phylib. As first user convert r8169. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Replace rtl8169_ioctl with new generic function phy_do_ioctl. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
A number of network drivers has the same glue code to use phy_mii_ioctl as ndo_do_ioctl handler. So let's add such a generic ndo_do_ioctl handler to phylib. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The SERDES statistics are valid for all members of the 6390 family, not just the 6390 itself. Add the needed callbacks to all members of the family. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Marginean authored
USXGMII supports passing link information in-band between PHY and MAC PCS, add it to the list of protocols that support in-band AN mode. Being a MAC-PHY protocol that can auto-negotiate link speeds up to 10 Gbps, we populate the initial supported mask with the entire spectrum of link modes up to 10G that PHYLINK supports, and we let the driver reduce that mask in its .phylink_validate method. Signed-off-by:
Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Marginean authored
The APIs can be used by Ethernet drivers without actually loading a PHY driver. This may become more widespread in the future with 802.3z compatible MAC PCS devices being locally driven by the MAC driver when configuring for a PHY mode with in-band negotiation. Check that drv is not NULL before reading from it. Signed-off-by:
Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
For some reason, PHYLINK does not put the copper modes for 802.3bz (NBASE-T) and 802.3an-2006 (10GBASE-T) in the PHY's supported mask, when the PHY-MAC connection is a 10G-capable one (10GBase-KR, 10GBase-R, USXGMII). One possible way through which the cable side can work at the lower speed is by having the PHY emit PAUSE frames towards the MAC. So fix that omission. Also include the 2500Base-X fiber mode in this list while we're at it. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dejin Zheng authored
snps databook noted that physical coding sublayer (PCS) interface that can be used when the MAC is configured for the TBI, RTBI, or SGMII PHY interface. we have RGMII and SGMII in a SoC and it also has the PCS block. it needs stmmac_init_phy and stmmac_mdio_register function for initializing phy when it used RGMII interface. Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 19 Jan, 2020 7 commits
-
-
David S. Miller authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Three fixes for RISC-V: - Don't free and reuse memory containing the code that CPUs parked at boot reside in. - Fix rv64 build problems for ubsan and some modules by adding logical and arithmetic shift helpers for 128-bit values. These are from libgcc and are similar to what's present for ARM64. - Fix vDSO builds to clean up their own temporary files" * tag 'riscv/for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Less inefficient gcc tishift helpers (and export their symbols) riscv: delete temporary files riscv: make sure the cores stay looping in .Lsecondary_park
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix non-blocking connect() in x25, from Martin Schiller. 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski. 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang. 4) Limit size of TSO packets properly in lan78xx driver, from Eric Dumazet. 5) r8152 probe needs an endpoint sanity check, from Johan Hovold. 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from John Fastabend. 7) hns3 needs short frames padded on transmit, from Yunsheng Lin. 8) Fix netfilter ICMP header corruption, from Eyal Birger. 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu. 10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan. 11) Fix memory leak in act_ctinfo, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: reject overlapped queues in TC-MQPRIO offload cxgb4: fix Tx multi channel port rate limit net: sched: act_ctinfo: fix memory leak bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal. bnxt_en: Fix ipv6 RFS filter matching logic. bnxt_en: Fix NTUPLE firmware command failures. net: systemport: Fixed queue mapping in internal ring map net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec net: dsa: sja1105: Don't error out on disabled ports with no phy-mode net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset net: hns: fix soft lockup when there is not enough memory net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() net/sched: act_ife: initalize ife->metalist earlier netfilter: nat: fix ICMP header corruption on ICMP errors net: wan: lapbether.c: Use built-in RCU list checking netfilter: nf_tables: fix flowtable list del corruption netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks() netfilter: nf_tables: remove WARN and add NLA_STRING upper limits netfilter: nft_tunnel: ERSPAN_VERSION must not be null netfilter: nft_tunnel: fix null-attribute check ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Two runtime PM fixes and one leak fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: iop3xx: Fix memory leak in probe error path i2c: tegra: Properly disable runtime PM on driver's probe error i2c: tegra: Fix suspending in active runtime PM state
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add tunnel devlink-trap support This patch set from Amit adds support in mlxsw for tunnel traps and a few additional layer 3 traps that can report drops and exceptions via devlink-trap. These traps allow the user to more quickly diagnose problems relating to tunnel decapsulation errors, such as packet being too short to decapsulate or a packet containing wrong GRE key in its GRE header. Patch set overview: Patches #1-#4 add three additional layer 3 traps. Two of which are mlxsw-specific as they relate to hardware-specific errors. The patches include documentation of each trap and selftests. Patches #5-#8 are preparations. They ensure that the correct ECN bits are set in the outer header during IPinIP encapsulation and that packets with an invalid ECN combination in underlay and overlay are trapped to the kernel and not decapsulated in hardware. Patches #9-#15 add support for two tunnel related traps. Each trap is documented and selftested using both VXLAN and IPinIP tunnels, if applicable. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
Test that the trap is triggered under the right conditions and that devlink counters increase when action is trap. Signed-off-by:
Amit Cohen <amitc@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
Add a trap for NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by:
Amit Cohen <amitc@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-