- 25 Mar, 2013 16 commits
-
-
Hans Verkuil authored
- try_fmt should never return -EBUSY. - invalid pix->field values were not mapped to a valid value. - the priv field of struct v4l2_pix_format wasn't zeroed. - the try_fmt error code was not checked in set_fmt. - enum_framesizes/intervals is valid for both MJPEG and MPEG pixel formats. - enum_frameintervals didn't check width and height and reported the wrong range. - s_parm didn't set readbuffers. - don't fail on invalid colorspace, just replace with the valid colorspace. - bytesperline should be 0 for compressed formats. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Note that the MOTION_THRESHOLD functionality has been temporarily reduced: only the global threshold can be set, not the per-block. This will be addressed in a later patch: controls are not the proper way to do this. Signed-off-by:
-
Hans Verkuil authored
Add support for struct v4l2_device. Signed-off-by:
-
Hans Verkuil authored
Setup correct bus_info, let the v4l2 core set the version and add device_caps support. Also update the module version to 3.0.0 since this is a major upgrade. Signed-off-by:
-
Hans Verkuil authored
Synced to commit e9815ac5503ae60cfbf6ff8037035de8f62e2846 from branch next in git repository https://github.com/bluecherrydvr/solo6x10.git Only removed some code under #if LINUX_VERSION_CODE < some-kernel-version, renamed the driver back to solo6x10 from solo6x10-edge, removed the unnecessary compat.h header and kept the slab.h includes. Otherwise the code is identical. Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
-
Alexander Shiyan authored
lirc_sir uses the CONFIG_SA1100_BITSY Kconfig macro. But its Kconfig symbol was removed in v2.4.13. So remove dead code associated with it. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Volokh Konstantin authored
Case: In AdLink MPG24 there is bt878 exists (it captures one frame of all video inputs), Video Signal for it one transmits through tw2804 chip, so we can't control ADC (shut on/off) on tw2804, as some another can use bttv capture way. Signed-off-by:
Volokh Konstantin <volokh84@gmail.com> Signed-off-by:
-
Chen Gang authored
For NUL terminated string, need always set '\0' in the end. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Sachin Kamat authored
version.h header inclusion is not necessary as detected by versioncheck. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Hans Verkuil authored
Using two separate tables to setup the registers for 50 or 60 hz is better than the non-const table that is filled in at runtime. Signed-off-by:
-
Hans Verkuil authored
The go7007 driver would continue during probe if no firmware could be loaded. Without firmware the probe() should return an error, so do that. Also move the registration of devices to the end of the probe() sequence: once devices appear the full driver functionality should be available. Signed-off-by:
-
Hans Verkuil authored
Include the patch required to add support for the go7007 to saa7134. To be applied once the driver is moved out of staging. Signed-off-by:
-
Hans Verkuil authored
The only thing missing after this to make the Sensoray model 614 board work is to hook it up to the saa7134 driver, but that will have to wait until this driver goes out of staging. Signed-off-by:
Pete Eberlein <pete@sensoray.com> [hans.verkuil@cisco.com: updated to make it merge correctly] Signed-off-by:
-
Sachin Kamat authored
version.h header inclusion is not necessary as detected by versioncheck. Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
-
- 24 Mar, 2013 24 commits
-
-
Hans Verkuil authored
Update the brighness range depending on the selected input. Useful for testing control range events. Signed-off-by:
-
Mauro Carvalho Chehab authored
A patchset applied earlier changed v4l2_tuner struct parameter at vidioc_s_tuner to const. Do this change at sony_btf_mpx_s_tuner(), in order to remove this warning: drivers/media/i2c/sony-btf-mpx.c:335:2: warning: initialization from incompatible pointer type [enabled by default] drivers/media/i2c/sony-btf-mpx.c:335:2: warning: (near initialization for 'sony_btf_mpx_tuner_ops.s_tuner') [enabled by default] Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This API is now obsolete and can be removed. Signed-off-by:
-
Hans Verkuil authored
This API is no longer used by any driver and so can be removed from the documentation. Signed-off-by:
-
Hans Verkuil authored
These ioctls are no longer used by any drivers, so remove them. [mchehab@redhat.com: Fix merge conflict] Signed-off-by:
-
Hans Verkuil authored
These ops are no longer used, so it's time to remove them. Signed-off-by:
-
Hans Verkuil authored
It's no longer used, so it can now be removed. Signed-off-by:
-
Hans Verkuil authored
Taken from the 0.9.8-5 version of the out-of-tree wis-go7007 driver. Signed-off-by:
-
Hans Verkuil authored
Taken from the 0.9.8-5 version of the out-of-tree wis-go7007 driver. Signed-off-by:
-
Hans Verkuil authored
The firmware is always the same, so drop it from the board configs. Also make the board configs const. Signed-off-by:
-
Hans Verkuil authored
Actually it's called "Group of VOP" start code in MPEG4 terminology. Taken from the 0.9.8-5 version of the out-of-tree wis-go7007 driver. Signed-off-by:
-
Hans Verkuil authored
But now as a proper standard MPEG control. Signed-off-by:
-
Volokh Konstantin authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Add support for the other devices that need to load the boot firmware. All firmware files are now placed in a single go7007 directory. Also remove the device_extension_s stuff: this is clearly a left-over from the olden days. Signed-off-by:
-
Hans Verkuil authored
All s2250 names are renamed to go7007. This will be the generic go7007 firmware loader for any go7007 device, not just for the s2250/1. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Remove these dummy cropping functions: cropping was never implemented. Signed-off-by:
-
Hans Verkuil authored
Do not allocate it, but just embed in the go7007 struct. Signed-off-by:
-
Hans Verkuil authored
Convert this driver to videobuf2 and core locking. Signed-off-by:
-
Hans Verkuil authored
Remove struct go7007_file: all fields contained in that struct are moved to the go7007 struct since they are really global values. The lock has just been deleted (what's the point of a per-fh lock??). Signed-off-by:
-
Hans Verkuil authored
The s_crystal_freq operation has to be called for the saa7115 to set up the audio clock correctly. Signed-off-by:
-
