1. 08 Oct, 2013 1 commit
    • Nishanth Menon's avatar
      ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree · 016c12d2
      Nishanth Menon authored
      SoC family definitions at the moment are reactive to board needs
      as a result, beagle-xm would matchup with ti,omap3 which invokes
      omap3430_init_early instead of omap3630_init_early. Obviously, this is
      the wrong behavior.
      
      With clock node dts conversion, we get the following warnings before
      system hangs as a result and 3630 based platforms fails to boot
      (uart4 clocks are only present in OMAP3630 and not present in
      OMAP3430):
      
      ...
      omap_hwmod: uart4: cannot clk_get main_clk uart4_fck
      omap_hwmod: uart4: cannot _init_clocks
      
      WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434
      _init+0x6c/0x80()
      omap_hwmod: uart4: couldn't init clocks
      ...
      
      WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126
      _enable+0x254/0x280()
      omap_hwmod: timer12: enabled state can only be entered from
      initialized, idle, or disabled state
      ...
      
      WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224
      _idle+0xd4/0xf8()
      omap_hwmod: timer12: idle state can only be entered from enabled state
      
      WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126
      _enable+0x254/0x280()
      omap_hwmod: uart4: enabled state can only be entered from
      initialized, idle, or disabled state
      
      So, add specific compatiblity for 3630 to allow match for Beagle-XM
      platform.
      Signed-off-by: default avatarNishanth Menon <nm@ti.com>
      [tony@atomide.com: left out ti,omap343x, updated comments]
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      016c12d2
  2. 03 Oct, 2013 1 commit
    • Aaro Koskinen's avatar
      ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT · 1dc1c338
      Aaro Koskinen authored
      With DT-based boot, the GPMC OneNAND sync mode setup does not work
      correctly. During the async mode setup, sync flags gets incorrectly
      set in the onenand_async data and the system crashes during the async
      setup. Also, the sync mode never gets set in gpmc_onenand_data->flags, so
      even without the crash, the actual sync mode setup would never be called.
      
      The patch fixes this by adjusting the gpmc_onenand_data->flags when the
      data is read from the DT. Also while doing this we force the onenand_async
      to be always async.
      
      The patch enables to use the following DTS chunk (that should correspond
      the arch/arm/mach-omap2/board-rm680.c board file setup) with Nokia N950,
      which currently crashes with 3.12-rc1. The crash output can be also
      found below.
      
      &gpmc {
      	ranges = <0 0 0x04000000 0x20000000>;
      
      	onenand@0,0 {
      		#address-cells = <1>;
      		#size-cells = <1>;
      		reg = <0 0 0x20000000>;
      
      		gpmc,sync-read;
      		gpmc,sync-write;
      		gpmc,burst-length = <16>;
      		gpmc,burst-read;
      		gpmc,burst-wrap;
      		gpmc,burst-write;
      		gpmc,device-width = <2>;
      		gpmc,mux-add-data = <2>;
      		gpmc,cs-on-ns = <0>;
      		gpmc,cs-rd-off-ns = <87>;
      		gpmc,cs-wr-off-ns = <87>;
      		gpmc,adv-on-ns = <0>;
      		gpmc,adv-rd-off-ns = <10>;
      		gpmc,adv-wr-off-ns = <10>;
      		gpmc,oe-on-ns = <15>;
      		gpmc,oe-off-ns = <87>;
      		gpmc,we-on-ns = <0>;
      		gpmc,we-off-ns = <87>;
      		gpmc,rd-cycle-ns = <112>;
      		gpmc,wr-cycle-ns = <112>;
      		gpmc,access-ns = <81>;
      		gpmc,page-burst-access-ns = <15>;
      		gpmc,bus-turnaround-ns = <0>;
      		gpmc,cycle2cycle-delay-ns = <0>;
      		gpmc,wait-monitoring-ns = <0>;
      		gpmc,clk-activation-ns = <5>;
      		gpmc,wr-data-mux-bus-ns = <30>;
      		gpmc,wr-access-ns = <81>;
      		gpmc,sync-clk-ps = <15000>;
      	};
      };
      
      [    1.467559] GPMC CS0: cs_on     :   0 ticks,   0 ns (was   0 ticks)   0 ns
      [    1.474822] GPMC CS0: cs_rd_off :   1 ticks,   5 ns (was  24 ticks)   5 ns
      [    1.482116] GPMC CS0: cs_wr_off :  14 ticks,  71 ns (was  24 ticks)  71 ns
      [    1.489349] GPMC CS0: adv_on    :   0 ticks,   0 ns (was   0 ticks)   0 ns
      [    1.496582] GPMC CS0: adv_rd_off:   3 ticks,  15 ns (was   3 ticks)  15 ns
      [    1.503845] GPMC CS0: adv_wr_off:   3 ticks,  15 ns (was   3 ticks)  15 ns
      [    1.511077] GPMC CS0: oe_on     :   3 ticks,  15 ns (was   4 ticks)  15 ns
      [    1.518310] GPMC CS0: oe_off    :   1 ticks,   5 ns (was  24 ticks)   5 ns
      [    1.525543] GPMC CS0: we_on     :   0 ticks,   0 ns (was   0 ticks)   0 ns
      [    1.532806] GPMC CS0: we_off    :   8 ticks,  40 ns (was  24 ticks)  40 ns
      [    1.540039] GPMC CS0: rd_cycle  :   4 ticks,  20 ns (was  29 ticks)  20 ns
      [    1.547302] GPMC CS0: wr_cycle  :   4 ticks,  20 ns (was  29 ticks)  20 ns
      [    1.554504] GPMC CS0: access    :   0 ticks,   0 ns (was  23 ticks)   0 ns
      [    1.561767] GPMC CS0: page_burst_access:   0 ticks,   0 ns (was   3 ticks)   0 ns
      [    1.569641] GPMC CS0: bus_turnaround:   0 ticks,   0 ns (was   0 ticks)   0 ns
      [    1.577270] GPMC CS0: cycle2cycle_delay:   0 ticks,   0 ns (was   0 ticks)   0 ns
      [    1.585144] GPMC CS0: wait_monitoring:   0 ticks,   0 ns (was   0 ticks)   0 ns
      [    1.592834] GPMC CS0: clk_activation:   0 ticks,   0 ns (was   0 ticks)   0 ns
      [    1.600463] GPMC CS0: wr_data_mux_bus:   5 ticks,  25 ns (was   8 ticks)  25 ns
      [    1.608154] GPMC CS0: wr_access :   0 ticks,   0 ns (was  23 ticks)   0 ns
      [    1.615386] GPMC CS0 CLK period is 5 ns (div 1)
      [    1.625122] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf009e442
      [    1.633178] Internal error: : 1008 [#1] ARM
      [    1.637573] Modules linked in:
      [    1.640777] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc1-n9xx-los.git-5318619-00006-g4baa700-dirty #26
      [    1.651123] task: ef04c000 ti: ef050000 task.ti: ef050000
      [    1.656799] PC is at gpmc_onenand_setup+0x98/0x1e0
      [    1.661865] LR is at gpmc_cs_set_timings+0x494/0x5a4
      [    1.667083] pc : [<c002e040>]    lr : [<c001f384>]    psr: 60000113
      [    1.667083] sp : ef051d10  ip : ef051ce0  fp : ef051d94
      [    1.679138] r10: c0caaf60  r9 : ef050000  r8 : ef18b32c
      [    1.684631] r7 : f0080000  r6 : c0caaf60  r5 : 00000000  r4 : f009e400
      [    1.691497] r3 : f009e442  r2 : 80050000  r1 : 00000014  r0 : 00000000
      [    1.698333] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
      [    1.706024] Control: 10c5387d  Table: af290019  DAC: 00000015
      [    1.712066] Process swapper (pid: 1, stack limit = 0xef050240)
      [    1.718200] Stack: (0xef051d10 to 0xef052000)
      [    1.722778] 1d00:                                     00004000 00001402 00000000 00000005
      [    1.731384] 1d20: 00000047 00000000 0000000f 0000000f 00000000 00000028 0000000f 00000005
      [    1.739990] 1d40: 00000000 00000000 00000014 00000014 00000000 00000000 00000000 00000000
      [    1.748596] 1d60: 00000000 00000019 00000000 00000000 ef18b000 ef099c50 c0c8cb30 00000000
      [    1.757171] 1d80: c0488074 c048f868 ef051dcc ef051d98 c024447c c002dfb4 00000000 c048f868
      [    1.765777] 1da0: 00000000 00000000 c010e4a4 c0dbbb7c c0c8cb40 00000000 c0ca2500 c0488074
      [    1.774383] 1dc0: ef051ddc ef051dd0 c01fd508 c0244370 ef051dfc ef051de0 c01fc204 c01fd4f4
      [    1.782989] 1de0: c0c8cb40 c0ca2500 c0c8cb74 00000000 ef051e1c ef051e00 c01fc3b0 c01fc104
      [    1.791595] 1e00: ef0983bc 00000000 c0ca2500 c01fc31c ef051e44 ef051e20 c01fa794 c01fc328
      [    1.800201] 1e20: ef03634c ef0983b0 ef27d534 c0ca2500 ef27d500 c0c9a2f8 ef051e54 ef051e48
      [    1.808807] 1e40: c01fbcfc c01fa744 ef051e84 ef051e58 c01fb838 c01fbce4 c0411df8 c0caa040
      [    1.817413] 1e60: ef051e84 c0ca2500 00000006 c0caa040 00000066 c0488074 ef051e9c ef051e88
      [    1.825988] 1e80: c01fca30 c01fb768 c04975b8 00000006 ef051eac ef051ea0 c01fd728 c01fc9bc
      [    1.834594] 1ea0: ef051ebc ef051eb0 c048808c c01fd6e4 ef051f4c ef051ec0 c0008888 c0488080
      [    1.843200] 1ec0: 0000006f c046bae8 00000000 00000000 ef051efc ef051ee0 ef051f04 ef051ee8
      [    1.851806] 1ee0: c046d400 c0181218 c046d410 c18da8d5 c036a8e4 00000066 ef051f4c ef051f08
      [    1.860412] 1f00: c004b9a8 c046d41c c048f840 00000006 00000006 c046b488 00000000 c043ec08
      [    1.869018] 1f20: ef051f4c c04975b8 00000006 c0caa040 00000066 c046d410 c048f85c c048f868
      [    1.877593] 1f40: ef051f94 ef051f50 c046db8c c00087a0 00000006 00000006 c046d410 ffffffff
      [    1.886199] 1f60: ffffffff ffffffff ffffffff 00000000 c0348fd0 00000000 00000000 00000000
      [    1.894805] 1f80: 00000000 00000000 ef051fac ef051f98 c0348fe0 c046daa8 00000000 00000000
      [    1.903411] 1fa0: 00000000 ef051fb0 c000e7f8 c0348fdc 00000000 00000000 00000000 00000000
      [    1.912017] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
      [    1.920623] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
      [    1.929199] Backtrace:
      [    1.931793] [<c002dfa8>] (gpmc_onenand_setup+0x0/0x1e0) from [<c024447c>] (omap2_onenand_probe+0x118/0x49c)
      [    1.942047] [<c0244364>] (omap2_onenand_probe+0x0/0x49c) from [<c01fd508>] (platform_drv_probe+0x20/0x24)
      [    1.952117]  r8:c0488074 r7:c0ca2500 r6:00000000 r5:c0c8cb40 r4:c0dbbb7c
      [    1.959197] [<c01fd4e8>] (platform_drv_probe+0x0/0x24) from [<c01fc204>] (driver_probe_device+0x10c/0x224)
      [    1.969360] [<c01fc0f8>] (driver_probe_device+0x0/0x224) from [<c01fc3b0>] (__driver_attach+0x94/0x98)
      [    1.979125]  r7:00000000 r6:c0c8cb74 r5:c0ca2500 r4:c0c8cb40
      [    1.985107] [<c01fc31c>] (__driver_attach+0x0/0x98) from [<c01fa794>] (bus_for_each_dev+0x5c/0x90)
      [    1.994506]  r6:c01fc31c r5:c0ca2500 r4:00000000 r3:ef0983bc
      [    2.000488] [<c01fa738>] (bus_for_each_dev+0x0/0x90) from [<c01fbcfc>] (driver_attach+0x24/0x28)
      [    2.009735]  r6:c0c9a2f8 r5:ef27d500 r4:c0ca2500
      [    2.014587] [<c01fbcd8>] (driver_attach+0x0/0x28) from [<c01fb838>] (bus_add_driver+0xdc/0x260)
      [    2.023742] [<c01fb75c>] (bus_add_driver+0x0/0x260) from [<c01fca30>] (driver_register+0x80/0xfc)
      [    2.033081]  r8:c0488074 r7:00000066 r6:c0caa040 r5:00000006 r4:c0ca2500
      [    2.040161] [<c01fc9b0>] (driver_register+0x0/0xfc) from [<c01fd728>] (__platform_driver_register+0x50/0x64)
      [    2.050476]  r5:00000006 r4:c04975b8
      [    2.054260] [<c01fd6d8>] (__platform_driver_register+0x0/0x64) from [<c048808c>] (omap2_onenand_driver_init+0x18/0x20)
      [    2.065490] [<c0488074>] (omap2_onenand_driver_init+0x0/0x20) from [<c0008888>] (do_one_initcall+0xf4/0x150)
      [    2.075836] [<c0008794>] (do_one_initcall+0x0/0x150) from [<c046db8c>] (kernel_init_freeable+0xf0/0x1b4)
      [    2.085815] [<c046da9c>] (kernel_init_freeable+0x0/0x1b4) from [<c0348fe0>] (kernel_init+0x10/0xec)
      [    2.095336] [<c0348fd0>] (kernel_init+0x0/0xec) from [<c000e7f8>] (ret_from_fork+0x14/0x3c)
      [    2.104125]  r4:00000000 r3:00000000
      [    2.107879] Code: ebffc3ae e2505000 ba00002e e2843042 (e1d320b0)
      [    2.114318] ---[ end trace b8ee3e3e5e002451 ]---
      Signed-off-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      1dc1c338
  3. 29 Sep, 2013 10 commits
    • Linus Torvalds's avatar
      Linux 3.12-rc3 · 15c03dd4
      Linus Torvalds authored
      15c03dd4
    • Linus Torvalds's avatar
      Merge tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 30ceb4ec
      Linus Torvalds authored
      Pull USB fixes from Greg KH:
       "Here are a number of USB driver fixes for 3.12-rc3.
      
        These are all for host controller issues that have been reported, and
        there's a fix for an annoying error message that gets printed every
        time you remove a USB 3 device from the system that's been bugging me
        for a while"
      
      * tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        usb: dwc3: add support for Merrifield
        USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization
        USB: Fix breakage in ffs_fs_mount()
        fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
        usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit
        usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA
        usb: chipidea: udc: free pending TD at removal procedure
        usb: chipidea: imx: Add usb_phy_shutdown at probe's error path
        usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal
        usb: chipidea: udc: fix the oops after rmmod gadget
        USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd
        USB: OHCI: accept very late isochronous URBs
        USB: UHCI: accept very late isochronous URBs
        USB: iMX21: accept very late isochronous URBs
        usbcore: check usb device's state before sending a Set SEL control transfer
        xhci: Fix race between ep halt and URB cancellation
        usb: Fix xHCI host issues on remote wakeup.
        xhci: Ensure a command structure points to the correct trb on the command ring
        xhci: Fix oops happening after address device timeout
      30ceb4ec
    • Linus Torvalds's avatar
      Merge tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · 26c019fc
      Linus Torvalds authored
      Pull tty/serial fixes from Greg KH:
       "Here are some serial at tty driver fixes for 3.12-rc3
      
        The serial driver fixes some kref leaks, documentation is moved to the
        proper places, and the tty and n_tty fixes resolve some reported
        regressions.  There is still one outstanding tty regression fix that
        isn't in here yet, as I want to test it out some more, it will be sent
        for 3.12-rc4 if it checks out"
      
      * tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
        tty: ar933x_uart: move devicetree binding documentation
        tty: Fix SIGTTOU not sent with tcflush()
        n_tty: Fix EOF push index when termios changes
        serial: pch_uart: remove unnecessary tty_port_tty_get
        serial: pch_uart: fix tty-kref leak in dma-rx path
        serial: pch_uart: fix tty-kref leak in rx-error path
        serial: tegra: fix tty-kref leak
      26c019fc
    • Linus Torvalds's avatar
      Merge tag 'staging-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 31795c40
      Linus Torvalds authored
      Pull staging fixes from Greg KH:
       "Here are some staging driver fixes, MAINTAINER updates, and a new
        device id.  All of these have been in the linux-next tree, and are
        pretty simple patches"
      
      * tag 'staging-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        staging: r8188eu: Add new device ID
        staging: imx-drm: Fix probe failure
        staging: vt6656: [BUG] iwctl_siwencodeext return if device not open
        staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier.
        staging: vt6656: rxtx.c [BUG] s_vGetFreeContext dead lock on null apTD.
        Staging: rtl8192u: r819xU_cmdpkt: checking NULL value after doing dev_alloc_skb
        staging: usbip: Orphan usbip
        staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
        staging: r8188eu: Cocci spatch "noderef"
        staging: octeon-usb: Cocci spatch "noderef"
        staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
        MAINTAINERS: staging: dgnc and dgap drivers: add maintainer
        staging: lustre: Cocci spatch "noderef"
      31795c40
    • Linus Torvalds's avatar
      Merge tag 'driver-core-3.12-rc3' of... · 434ac47d
      Linus Torvalds authored
      Merge tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
      
      Pull driver core / sysfs fixes from Greg KH:
       "Here are 2 fixes for 3.12-rc3.  One fixes a sysfs problem with
        mounting caused by 3.12-rc1, and the other is a bug reported by the
        chromeos developers with the driver core.
      
        Both have been in linux-next for a bit"
      
      * tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
        driver core : Fix use after free of dev->parent in device_shutdown
        sysfs: Allow mounting without CONFIG_NET
      434ac47d
    • Linus Torvalds's avatar
      Merge tag 'char-misc-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · c23c2234
      Linus Torvalds authored
      Pull char/misc driver fixes from Greg KH:
       "Here are some HyperV and MEI driver fixes for 3.12-rc3.  They resolve
        some issues that people have been reporting for them"
      
      * tag 'char-misc-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
        Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout
        Drivers: hv: util: Correctly support ws2008R2 and earlier
        mei: cancel stall timers in mei_reset
        mei: bus: stop wait for read during cl state transition
        mei: make me client counters less error prone
      c23c2234
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · cac66535
      Linus Torvalds authored
      Pull perf revert from Ingo Molnar:
       "This fixes the 'perf top' regression Markus Trippelsdorf reported"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        Revert "perf symbols: Demangle cloned functions"
      cac66535
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · b97b869a
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "Nothing too major, radeon still has some dpm changes for off by
        default.
      
        Radeon, intel, msm:
         - radeon: a few more dpm fixes (still off by default), uvd fixes
         - i915: runtime warn backtrace and regression fix
         - msm: iommu changes fallout"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (27 commits)
        drm/msm: use drm_gem_dumb_destroy helper
        drm/msm: deal with mach/iommu.h removal
        drm/msm: Remove iommu include from mdp4_kms.c
        drm/msm: Odd PTR_ERR usage
        drm/i915: Fix up usage of SHRINK_STOP
        drm/radeon: fix hdmi audio on DCE3.0/3.1 asics
        drm/i915: preserve pipe A quirk in i9xx_set_pipeconf
        drm/i915/tv: clear adjusted_mode.flags
        drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER
        drm/radeon/cik: fix overflow in vram fetch
        drm/radeon: add missing hdmi callbacks for rv6xx
        drm/i915: Use a temporary va_list for two-pass string handling
        drm/radeon/uvd: lower msg&fb buffer requirements on UVD3
        drm/radeon: disable tests/benchmarks if accel is disabled
        drm/radeon: don't set default clocks for SI when DPM is disabled
        drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables
        drm/radeon/dpm/si: filter clocks based on voltage/clk dep tables
        drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables
        drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables
        drm/radeon/dpm: fetch the max clk from voltage dep tables helper
        ...
      b97b869a
    • Ingo Molnar's avatar
      Revert "perf symbols: Demangle cloned functions" · 14951f22
      Ingo Molnar authored
      This reverts commit de95ab53.
      
      Markus Trippelsdorf reported that this commit broke 'perf top':
      
       > I just see a gray screen with no text at all. Sometimes the
       > following error messages are printed:
       >
       >  *** Error in `perf': invalid fastbin entry (free): 0x00000000029b18c0
       >  ***
       >  *** Error in `perf': malloc(): memory corruption (fast): 0x0000000000ee0b10 ***
      
      While this code is fixable, the commit itself fails on several levels:
      
       - it should have been a separate helper function
       - why the heck does it do strchr() twice
       - it casts a const char * over into char *
       - sloppy style
       - it's not even a regression fix!
      
      So lets revert it and re-try the patch in v3.13.
      Reported-by: default avatarMarkus Trippelsdorf <markus@trippelsdorf.de>
      Cc: Andi Kleen <ak@linux.intel.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      14951f22
    • Dave Airlie's avatar
      Merge branch 'msm-fixes-3.12-rc2' of git://people.freedesktop.org/~robclark/linux into drm-fixes · 66544179
      Dave Airlie authored
      A small fix + deal with fallout of iommu changes + use new
      drm_gem_dumb_destroy helper.
      
      * 'msm-fixes-3.12-rc2' of git://people.freedesktop.org/~robclark/linux:
        drm/msm: use drm_gem_dumb_destroy helper
        drm/msm: deal with mach/iommu.h removal
        drm/msm: Remove iommu include from mdp4_kms.c
        drm/msm: Odd PTR_ERR usage
      66544179
  4. 28 Sep, 2013 21 commits
  5. 27 Sep, 2013 7 commits