1. 15 Nov, 2016 27 commits
  2. 14 Nov, 2016 13 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · e76d21c4
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix off by one wrt. indexing when dumping /proc/net/route entries,
          from Alexander Duyck.
      
       2) Fix lockdep splats in iwlwifi, from Johannes Berg.
      
       3) Cure panic when inserting certain netfilter rules when NFT_SET_HASH
          is disabled, from Liping Zhang.
      
       4) Memory leak when nft_expr_clone() fails, also from Liping Zhang.
      
       5) Disable UFO when path will apply IPSEC tranformations, from Jakub
          Sitnicki.
      
       6) Don't bogusly double cwnd in dctcp module, from Florian Westphal.
      
       7) skb_checksum_help() should never actually use the value "0" for the
          resulting checksum, that has a special meaning, use CSUM_MANGLED_0
          instead. From Eric Dumazet.
      
       8) Per-tx/rx queue statistic strings are wrong in qed driver, fix from
          Yuval MIntz.
      
       9) Fix SCTP reference counting of associations and transports in
          sctp_diag. From Xin Long.
      
      10) When we hit ip6tunnel_xmit() we could have come from an ipv4 path in
          a previous layer or similar, so explicitly clear the ipv6 control
          block in the skb. From Eli Cooper.
      
      11) Fix bogus sleeping inside of inet_wait_for_connect(), from WANG
          Cong.
      
      12) Correct deivce ID of T6 adapter in cxgb4 driver, from Hariprasad
          Shenai.
      
      13) Fix potential access past the end of the skb page frag array in
          tcp_sendmsg(). From Eric Dumazet.
      
      14) 'skb' can legitimately be NULL in inet{,6}_exact_dif_match(). Fix
          from David Ahern.
      
      15) Don't return an error in tcp_sendmsg() if we wronte any bytes
          successfully, from Eric Dumazet.
      
      16) Extraneous unlocks in netlink_diag_dump(), we removed the locking
          but forgot to purge these unlock calls. From Eric Dumazet.
      
      17) Fix memory leak in error path of __genl_register_family(). We leak
          the attrbuf, from WANG Cong.
      
      18) cgroupstats netlink policy table is mis-sized, from WANG Cong.
      
      19) Several XDP bug fixes in mlx5, from Saeed Mahameed.
      
      20) Fix several device refcount leaks in network drivers, from Johan
          Hovold.
      
      21) icmp6_send() should use skb dst device not skb->dev to determine L3
          routing domain. From David Ahern.
      
      22) ip_vs_genl_family sets maxattr incorrectly, from WANG Cong.
      
      23) We leak new macvlan port in some cases of maclan_common_netlink()
          errors. Fix from Gao Feng.
      
      24) Similar to the icmp6_send() fix, icmp_route_lookup() should
          determine L3 routing domain using skb_dst(skb)->dev not skb->dev.
          Also from David Ahern.
      
      25) Several fixes for route offloading and FIB notification handling in
          mlxsw driver, from Jiri Pirko.
      
      26) Properly cap __skb_flow_dissect()'s return value, from Eric Dumazet.
      
      27) Fix long standing regression in ipv4 redirect handling, wrt.
          validating the new neighbour's reachability. From Stephen Suryaputra
          Lin.
      
      28) If sk_filter() trims the packet excessively, handle it reasonably in
          tcp input instead of exploding. From Eric Dumazet.
      
      29) Fix handling of napi hash state when copying channels in sfc driver,
          from Bert Kenward.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (121 commits)
        mlxsw: spectrum_router: Flush FIB tables during fini
        net: stmmac: Fix lack of link transition for fixed PHYs
        sctp: change sk state only when it has assocs in sctp_shutdown
        bnx2: Wait for in-flight DMA to complete at probe stage
        Revert "bnx2: Reset device during driver initialization"
        ps3_gelic: fix spelling mistake in debug message
        net: ethernet: ixp4xx_eth: fix spelling mistake in debug message
        ibmvnic: Fix size of debugfs name buffer
        ibmvnic: Unmap ibmvnic_statistics structure
        sfc: clear napi_hash state when copying channels
        mlxsw: spectrum_router: Correctly dump neighbour activity
        mlxsw: spectrum: Fix refcount bug on span entries
        bnxt_en: Fix VF virtual link state.
        bnxt_en: Fix ring arithmetic in bnxt_setup_tc().
        Revert "include/uapi/linux/atm_zatm.h: include linux/time.h"
        tcp: take care of truncations done by sk_filter()
        ipv4: use new_gw for redirect neigh lookup
        r8152: Fix error path in open function
        net: bpqether.h: remove if_ether.h guard
        net: __skb_flow_dissect() must cap its return value
        ...
      e76d21c4
    • Linus Torvalds's avatar
      Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile · d4b95323
      Linus Torvalds authored
      Pull arch/tile bugfix from Chris Metcalf:
       "This just fixes an incompatibility with tile __ro_after_init"
      
      * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
        tile: handle __ro_after_init like parisc does
      d4b95323
    • Linus Torvalds's avatar
      Merge tag 'rtc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux · ac38126b
      Linus Torvalds authored
      Pull RTC fixes from Alexandre Belloni:
       "Here are a few driver fixes for 4.9. It has been calm for a while so I
        don't expect more for this cycle.
      
        Drivers:
         - asm9260: fix module autoload
         - cmos: fix crashes
         - omap: fix clock handling"
      
      * tag 'rtc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
        rtc: omap: prevent disabling of clock/module during suspend
        rtc: omap: Fix selecting external osc
        rtc: cmos: Don't enable interrupts in the middle of the interrupt handler
        rtc: cmos: remove all __exit_p annotations
        rtc: asm9260: fix module autoload
      ac38126b
    • Chris Metcalf's avatar
      tile: handle __ro_after_init like parisc does · e123386b
      Chris Metcalf authored
      The tile architecture already marks RO_DATA as read-only in
      the kernel, so grouping RO_AFTER_INIT_DATA with RO_DATA, as is
      done by default, means the kernel faults in init when it tries
      to write to RO_AFTER_INIT_DATA.  For now, just arrange that
      __ro_after_init is handled like __write_once, i.e. __read_mostly.
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Signed-off-by: default avatarChris Metcalf <cmetcalf@mellanox.com>
      e123386b
    • Ido Schimmel's avatar
      mlxsw: spectrum_router: Flush FIB tables during fini · ac571de9
      Ido Schimmel authored
      Since commit b45f64d1 ("mlxsw: spectrum_router: Use FIB notifications
      instead of switchdev calls") we reflect to the device the entire FIB
      table and not only FIBs that point to netdevs created by the driver.
      
      During module removal, FIBs of the second type are removed following
      NETDEV_UNREGISTER events sent. The other FIBs are still present in both
      the driver's cache and the device's table.
      
      Fix this by iterating over all the FIB tables in the device and flush
      them. There's no need to take locks, as we're the only writer.
      
      Fixes: b45f64d1 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls")
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ac571de9
    • Florian Fainelli's avatar
      mdio: Demote print from info to debug in mdio_driver_register · eb2ca35f
      Florian Fainelli authored
      While it is useful to know which MDIO driver is being registered, demote
      the pr_info() to a pr_debug().
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eb2ca35f
    • Florian Fainelli's avatar
      net: stmmac: Fix lack of link transition for fixed PHYs · c51e424d
      Florian Fainelli authored
      Commit 52f95bbf ("stmmac: fix adjust link call in case of a switch
      is attached") added some logic to avoid polling the fixed PHY and
      therefore invoking the adjust_link callback more than once, since this
      is a fixed PHY and link events won't be generated.
      
      This works fine the first time, because we start with phydev->irq =
      PHY_POLL, so we call adjust_link, then we set phydev->irq =
      PHY_IGNORE_INTERRUPT and we stop polling the PHY.
      
      Now, if we called ndo_close(), which calls both phy_stop() and does an
      explicit netif_carrier_off(), we end up with a link down. Upon calling
      ndo_open() again, despite starting the PHY state machine, we have
      PHY_IGNORE_INTERRUPT set, and we generate no link event at all, so the
      link is permanently down.
      
      Fixes: 52f95bbf ("stmmac: fix adjust link call in case of a switch is attached")
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Acked-by: default avatarGiuseppe Cavallaro <peppe.cavallaro@st.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c51e424d
    • Gao Feng's avatar
      driver: macvlan: Replace integer number with bool value · d94d0254
      Gao Feng authored
      The return value of function macvlan_addr_busy is used as bool value,
      so use bool value instead of integer number "1" and "0".
      Signed-off-by: default avatarGao Feng <gfree.wind@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d94d0254
    • Mickaël Salaün's avatar
      bpf: Use u64_to_user_ptr() · 535e7b4b
      Mickaël Salaün authored
      Replace the custom u64_to_ptr() function with the u64_to_user_ptr()
      macro.
      Signed-off-by: default avatarMickaël Salaün <mic@digikod.net>
      Cc: Alexei Starovoitov <ast@kernel.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Daniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      535e7b4b
    • Xin Long's avatar
      sctp: change sk state only when it has assocs in sctp_shutdown · 5bf35ddf
      Xin Long authored
      Now when users shutdown a sock with SEND_SHUTDOWN in sctp, even if
      this sock has no connection (assoc), sk state would be changed to
      SCTP_SS_CLOSING, which is not as we expect.
      
      Besides, after that if users try to listen on this sock, kernel
      could even panic when it dereference sctp_sk(sk)->bind_hash in
      sctp_inet_listen, as bind_hash is null when sock has no assoc.
      
      This patch is to move sk state change after checking sk assocs
      is not empty, and also merge these two if() conditions and reduce
      indent level.
      
      Fixes: d46e416c ("sctp: sctp should change socket state when shutdown is received")
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Tested-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5bf35ddf
    • David S. Miller's avatar
      Merge branch 'bnx2-kdump-fix' · 193f5122
      David S. Miller authored
      Baoquan He says:
      
      ====================
      bnx2: Wait for in-flight DMA to complete at probe stage
      
      This is v2 post.
      
      In commit 3e1be7ad ("bnx2: Reset device during driver initialization"),
      firmware requesting code was moved from open stage to probe stage.
      The reason is in kdump kernel hardware iommu need device be reset in
      driver probe stage, otherwise those in-flight DMA from 1st kernel
      will continue going and look up into the newly created io-page tables.
      However bnx2 chip resetting involves firmware requesting issue, that
      need be done in open stage.
      
      Michale Chan suggested we can just wait for the old in-flight DMA to
      complete at probe stage, then though without device resetting, we
      don't need to worry the old in-flight DMA could continue looking up
      the newly created io-page tables.
      
      v1->v2:
          Michael suggested to wait for the in-flight DMA to complete at probe
          stage. So give up the old method of trying to reset chip at probe
          stage, take the new way accordingly.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      193f5122
    • Baoquan He's avatar
      bnx2: Wait for in-flight DMA to complete at probe stage · 6df77862
      Baoquan He authored
      In-flight DMA from 1st kernel could continue going in kdump kernel.
      New io-page table has been created before bnx2 does reset at open stage.
      We have to wait for the in-flight DMA to complete to avoid it look up
      into the newly created io-page table at probe stage.
      Suggested-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarBaoquan He <bhe@redhat.com>
      Acked-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6df77862
    • Baoquan He's avatar
      Revert "bnx2: Reset device during driver initialization" · 5d0d4b91
      Baoquan He authored
      This reverts commit 3e1be7ad.
      
      When people build bnx2 driver into kernel, it will fail to detect
      and load firmware because firmware is contained in initramfs and
      initramfs has not been uncompressed yet during do_initcalls. So
      revert commit 3e1be7ad and work out a new way in the later patch.
      Signed-off-by: default avatarBaoquan He <bhe@redhat.com>
      Acked-by: default avatarPaul Menzel <pmenzel@molgen.mpg.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5d0d4b91