We keep getting bounces from Baoyou Xie <baoyou.xie@linaro.org>.  We
do not know Baoyou's new email address, nor his interest to stay as
the co-maintainer.  Let's remove the non-exsiting email first, and we
can add his new email back if we heard back from him later.

Cc: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm64-soc-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Renesas ARM64 Based SoC SoC Updates for v4.20

* Add support for RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs
* Enable Compare Match Timer (CMT) and Timer Unit (TMU)
  for Renesas SoCs
* Remove no longer needed ARCH_SHMOBILE Kconfig symbol

* tag 'renesas-arm64-soc-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: Add Renesas R8A774C0 support
  arm64: Add Renesas R8A774A1 support
  arm64: enable CMT/TMU support for Renesas SoC
  arm64: renesas: Remove the ARCH_SHMOBILE Kconfig symbol
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu soc for 4.20 (part 1)

 - use dt_fixup to provide fallback for enable-method for Armada XP
 - document the marvell,prestera compatible string
 - update Thomas Petazzoni email in MAINTAINERS file

* tag 'mvebu-soc-4.20-1' of git://git.infradead.org/linux-mvebu:
  dt-bindings: marvell,prestera: Add common compatible string
  MAINTAINERS: replace free-electrons.com by bootlin.com for Thomas Petazzoni
  ARM: mvebu: use dt_fixup to provide fallback for enable-method
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-soc-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

i.MX SoC update for 4.20:
 - Add ipg clock support in MMDC driver for registers access, so that
   we will be safe even if the clock is not turned on by firmware.
 - Register pm_power_off handler to provide power off support for iMX6
   based boards with external PMIC.
 - Add platform code support for i.MX 6ULZ SoC which is a derivative of
   i.MX6ULL with some modules removed.

* tag 'imx-soc-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: add i.mx6ulz msl support
  ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
  ARM: imx: add mmdc ipg clock operation for mmdc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'actions-arm64-soc-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/soc

Actions Semi arm64 SoC for v4.20

This updates and extends the MAINTAINERS entry, adding Mani.
It also selects PINCTRL in Kconfig.

* tag 'actions-arm64-soc-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  arm64: actions: Enable PINCTRL in platforms Kconfig
  MAINTAINERS: Add entry for Actions Semi Owl SoCs DMA driver
  MAINTAINERS: Add entry for Actions Semiconductor Owl I2C driver
  MAINTAINERS: Update clock binding entry for Actions Semi Owl SoCs
  MAINTAINERS: Add Actions Semi S900 clk entries
  MAINTAINERS: Add reviewer for ACTIONS platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Berlin SoC files has been moved from marvell dir to synaptics dir, but
commit bc52497a ("MAINTAINERS: update entry for ARM/berlin") didn't
update the dir accordingly. This patch fixes it.

From another side, new derivative SoCs from Synaptics may not be named
as berlin*, so let's update the entries accordingly.

Fixes: bc52497a ("MAINTAINERS: update entry for ARM/berlin")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Drop include/dt-bindings/genpd/k2g.h which disappeared from kernel tree
some time back, however MAINTAINERS file was missed to be updated.

Fixes: d1664505 ("dt-bindings: Drop k2g genpd device ID macros")
Cc: Rob Herring <robh@kernel.org>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Select PINCTRL for Actions Semi SoCs.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add entry for Actions Semi Owl SoCs DMA driver under ARM/ACTIONS.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add entry for Actions Semiconductor Owl I2C driver under ARM/ACTIONS.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

commit d0e45d68 ("dt-bindings: clock: Add S700 support for Actions
Semi Soc's")'

renamed the clock binding for Actions Semi Owl SoCs from
actions,s900-cmu.txt to actions,owl-cmu.txt inorder to accommodate all
members of Owl family SoCs. Hence, update the relevant entry in
MAINTAINERS file.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

The i.MX 6ULZ processor is a high-performance, ultra
cost-efficient consumer Linux processor featuring an
advanced implementation of a single Arm® Cortex®-A7 core,
which operates at speeds up to 900 MHz.

This patch adds basic MSL support for i.MX6ULZ, the
i.MX6ULZ has same soc_id as i.MX6ULL, and SRC_SBMR2 bit[6]
is to differentiate i.MX6ULZ from i.MX6ULL, 1'b1 means
i.MX6ULZ and 1'b0 means i.MX6ULL.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'renesas-arm-soc-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Renesas ARM Based SoC Updates for v4.20

* Rework the PMIC IRQ line quirk to use DT rather than hard coded topology
* Convert to SPDX identifiers
* Convert to using %pOFn instead of device_node.name
* Remove the no longer needed ARCH_SHMOBILE Kconfig symbol
* RZ/G1N (r8a7744) SoC: Add basic SoC and debug-ll support
* R-Car H1 (r8a7779) SoC: remove unused includes

* tag 'renesas-arm-soc-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Rework the PMIC IRQ line quirk
  ARM: debug-ll: Add support for r8a7744
  ARM: shmobile: r8a7744: Basic SoC support
  ARM: shmobile: convert to SPDX identifiers
  ARM: shmobile: Convert to using %pOFn instead of device_node.name
  ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
  ARM: shmobile: r8a7779: Remove unused includes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

With this I assume maintainership of the Integrator, Versatile
and RealView ARM reference machines.

It's no big secret that I've been maintaining them for years,
but might as well make it official so I get the mails and
don't miss anything.

I have also included some drivers that are closely associated
with the ARM reference designs and yet orphaned in the
MAINTAINERS file. I can surely maintain them too, or route
the question to the right people so it doesn't fall on the
floor of upward to the subsystem maintainers who have too much
to do already as it is.

Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v4.20/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

A series of omap1 gpio changes for ams-delta

Janusz Krzysztofik has cleaned up ams-delta gpio usage along with
generic gpio framework improvments. This series contains the omap1
specific clean-up for ams-delta modem and unused gpios.

Note that this conflicts with the gpio-omap changes queued into
an immutable gpio branch ib-omap for the gpio-omap.h header file.
The merge resolution is to drop the IS_BUILTIN(CONFIG_GPIO_OMAP)
section and keep the #endif tagged for __ASSEMBLER__.

* tag 'omap-for-v4.20/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: ams-delta: Don't request unused GPIOs
  ARM: OMAP1: ams-delta-fiq: Use <linux/platform_data/gpio-omap.h>
  ARM: OMAP1: ams-delta: register MODEM device earlier
  ARM: OMAP1: ams-delta: initialize latch2 pins to safe values
  ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v4.20/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

SoC changes for omap variants

These changes improve support for clkctrl clocks to deal with
split memory ranges for clkctrl providers. And to use %pOFn
instead of device_node.name.

* tag 'omap-for-v4.20/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Convert to using %pOFn instead of device_node.name
  ARM: OMAP2+: hwmod_core: improve the support for clkctrl clocks
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This architecture, used for running in QEMU, runs just fine when
compiled in big-endian mode. So enable it. This is enabled in exactly
the same way that it is for other platforms (such as vexpress) that also
support big-endian mode in QEMU successfully.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: Xilinx Zynq SoC patches for v4.20

- Convert to using %pOFn instead of device_node.name in slcr driver

* tag 'zynq-soc-for-v4.20' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: Convert to using %pOFn instead of device_node.name
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 SoC for 4.20

 - rename MAINTAINERS entries and change maintainers
 - two pm cleanups

* tag 'at91-4.20-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  MAINTAINERS: sdhci: move the Microchip entry to proper location
  MAINTAINERS: move former ATMEL entries to proper MICROCHIP location
  MAINTAINERS: remove the / ATMEL string from MICROCHIP entries
  MAINTAINERS: iio: add co-maintainer to SAMA5D2-compatible ADC driver
  MAINTAINERS: pwm: add entry for Microchip pwm driver
  MAINTAINERS: dmaengine: add files to Microchip dma entry
  MAINTAINERS: USB: change maintainer for Microchip USBA gadget driver
  MAINTAINERS: ASoC: change maintainer for Microchip ALSA drivers
  MAINTAINERS: media: change Microchip ISI, ISC maintainers
  MAINTAINERS: update entry for Microchip NAND driver support
  MAINTAINERS: ARM: at91: add co-maintainer for ARM/Microchip
  ARM: at91: pm: call put_device instead of of_node_put in at91_pm_config_ws
  ARM: at91: pm: remove pm_bu initialization in at91_pm_backup_init()
Signed-off-by: Olof Johansson <olof@lixom.net>

All SDHCI controller drivers are gathered at the same place, add the
Microchip one there.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Standardize the Microchip / Atmel entries with the same form and move them
so that they are all located at the same place, under the newer MICROCHIP
banner.
Only modifications to the titles of the entries are done in this patch.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

No need to keep this additional string as it can puzzle people
while adding new driver's entries.
Move the NAND entry to keep it alphabetically ordered.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Add Eugen as co-maintainer with Ludovic of Microchip SAMA5D2-compatible
ADC driver.
Also add the binding documentation/include as file pattern.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Add the entry that was missing for pwm-atmel.c driver. Add binding file
as well.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

In Microchip DMA (HDMA actually) entry, add the missing files for
better matching with get_maintainer.pl tool.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Hand over this USB gadget driver to Cristian: atmel_usba.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Hand over to Codrin for Microchip Audio SoC drivers in "atmel"
directory.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

For ISC, Songjun is not with Microchip anymore, his address shouldn't be
reachable.
For ISI, Eugen can handle the maintenance now.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Replace the Microchip/Atmel NAND controller driver maintainer
by removing Josh and adding Tudor.

Cc: Josh Wu <rainyfeeling@outlook.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Add Ludovic as a new co-maintainer for the AT91 Microchip ARM
sub-architecture.
Add the newly created kernel.org group git tree that we will use
from now on.

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

of_find_device_by_node takes a reference to the struct device when it
finds a match via get_device. but it fails to put_device in
at91_pm_config_ws, for_each_matching_node_and_match will get and put
the node properly, there is no need to call the of_put_node. Therefore,
just call put_device instead of of_node_put in at91_pm_config_ws.

Fixes: d7484f5c ("ARM: at91: pm: configure wakeup sources for ULP1 mode")
Suggested-by: Claudiu Beznea <Claudiu.Beznea@microchip.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Add "marvell,prestera" as a compatible string so that drivers can be
written to account for any prestera variant without needing to
specialise to the more specific values.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Free Electrons is now called Bootlin, and my e-mail address was
changed as well, so this commit updates the entries in the MAINTAINERS
file accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

We need to maintain backwards compatibility with device trees that don't
define an enable method. At the same time we want the device tree to be
able to specify an enable-method and have it stick.

Previously by having smp assigned in the DT_MACHINE definition this
would be picked up by setup_arch() and override whatever
arm_dt_init_cpu_maps() had configured. Now we move the initial
assignment of default smp_ops to a dt_fixup and let
arm_dt_init_cpu_maps() override that if the device tree defines an
enable-method.

[olof@lixom.net: Wrap set_smp_ops() in CONFIG_SMP.]
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> (on AX3)
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Add mailing list for stm32 architecture.
Add "stm" pattern to not miss some drivers/directories when asking for maintainers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add S900 clk entries under ARCH_ACTIONS.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Since I'll be working on improving support for ACTIONS platforms, adding
myself as the reviewer.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

GPIOs with no kernel drivers can still be used from user space, don't
request them from the board file.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Instead of defining symbols already defined in
linux/platform_data/gpio-omap.h, use that header file.

Since we include the header into an assembler code, prevent C only bits
from being read in.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Amstrad Delta MODEM device used to be initialized at arch_initcall
before it was once moved to late_initcall by commit f7519d8c ("ARM:
OMAP1: ams-delta: register latch dependent devices later"). The purpose
of that change was to postpone initialization of devices which depended
on latch2 pins until latch2 converted to GPIO device was ready.

After recent fixes to GPIO handling, it was possible to moove
registration of most of those device back to where they were before.
The same can be safely done with the MODEM device as initialization
of GPIO pins it depends on was moved to machine_init by preceding
patch.

Move registration of the MODEM device to arch_initcall_sync, not to
arch_initcall, so it is never exposed to potential conflict in
registration order hazard against OMAP serial ports.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>