- 27 Jul, 2017 39 commits
-
-
Krzysztof Kozlowski authored
commit b556b15d upstream. of_genpd_del_provider() iterates over list of domain provides and removes matching element thus it has to use safe version of list iteration. Fixes: aa42240a (PM / Domains: Add generic OF-based PM domain look-up) Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
commit c6e83cac upstream. pm_genpd_remove_subdomain() iterates over domain's master_links list and removes matching element thus it has to use safe version of list iteration. Fixes: f721889f ("PM / Domains: Support for generic I/O PM domains (v8)") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Rosin authored
commit a00cebf5 upstream. At some point I added the "Low" entry at the beginning of the array without bumping the enumeration count from 9 to 10. Fix this. While at it, fix the anti-pattern for the other enumeration (used by MUX{1,2}). Fixes: aa431124 ("ASoC: atmel: tse850: add ASoC driver for the Axentia TSE-850") Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Satish Babu Patakokila authored
commit 01b8cedf upstream. Currently compress driver hardcodes direction as playback to get substream from the stream. This results in getting the incorrect substream for compressed capture usecase. To fix this, remove the hardcoding and derive substream based on the stream direction. Signed-off-by:
Satish Babu Patakokila <sbpata@codeaurora.org> Signed-off-by:
Banajit Goswami <bgoswami@codeaurora.org> Acked-By:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shawn Guo authored
commit a205c159 upstream. The SND_SOC_DAIFMT_MASTER bits are defined to specify the master/slave mode for Codec, not I2S. So the I2S master/slave mode should be flipped according to SND_SOC_DAIFMT_MASTER bits. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cyrille Pitchen authored
commit 7094576c upstream. This patch disables the use of the DMA for data transfer and forces the use of PIO transfers instead as a quick fixup to solve the cache aliasing issue on ARM9 based cores, which embeds a VIVT data cache. Indeed in the case of VIVT data caches, it is not safe to call dma_map_*() functions to map buffers for DMA transfers when those buffers have been allocated by vmalloc() or from any DMA-unsafe area. Further patches may propose a better solution based on the use of a bounce buffer at the SPI sub-system level but such solution needs more time to be discussed. Then the use of DMA transfers could be enabled again to improve the performances but before that, this patch already solves the issue. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matwey V Kornilov authored
commit 440aeca4 upstream. The functions igb_read_phy_reg_gs40g/igb_write_phy_reg_gs40g (which were removed in 2a3cdead) explicitly selected the required page at every phy_reg access. Currently, igb_get_phy_id_82575 relays on the fact that page 0 is already selected. The assumption is not fulfilled for my Lex 3I380CW motherboard with integrated dual i211 based gigabit ethernet. This leads to igb initialization failure and network interfaces are not working: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 igb: probe of 0000:02:00.0 failed with error -2 In order to fix it, we explicitly select page 0 before first access to phy registers. See also: https://bugzilla.suse.com/show_bug.cgi?id=1009911 See also: http://www.lex.com.tw/products/pdf/3I380A&3I380CW.pdf Fixes: 2a3cdead ("igb: Remove GS40G specific defines/functions") Signed-off-by:
Matwey V Kornilov <matwey@sai.msu.ru> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit 24e52b11 upstream. When doing an incremental send, while processing an extent that changed between the parent and send snapshots and that extent was an inline extent in the parent snapshot, it's possible to access a memory region beyond the end of leaf if the inline extent is very small and it is the first item in a leaf. An example scenario is described below. The send snapshot has the following leaf: leaf 33865728 items 33 free space 773 generation 46 owner 5 fs uuid ab7090d8-dafd-4fb9-9246-723b6d2e2fb7 chunk uuid 2d16478c-c704-4ab9-b574-68bff2281b1f (...) item 14 key (335 EXTENT_DATA 0) itemoff 3052 itemsize 53 generation 36 type 1 (regular) extent data disk byte 12791808 nr 4096 extent data offset 0 nr 4096 ram 4096 extent compression 0 (none) item 15 key (335 EXTENT_DATA 8192) itemoff 2999 itemsize 53 generation 36 type 1 (regular) extent data disk byte 138170368 nr 225280 extent data offset 0 nr 225280 ram 225280 extent compression 0 (none) (...) And the parent snapshot has the following leaf: leaf 31272960 items 17 free space 17 generation 31 owner 5 fs uuid ab7090d8-dafd-4fb9-9246-723b6d2e2fb7 chunk uuid 2d16478c-c704-4ab9-b574-68bff2281b1f item 0 key (335 EXTENT_DATA 0) itemoff 3951 itemsize 44 generation 31 type 0 (inline) inline extent data size 23 ram_bytes 613 compression 1 (zlib) (...) When computing the send stream, it is detected that the extent of inode 335, at file offset 0, and at fs/btrfs/send.c:is_extent_unchanged() we grab the leaf from the parent snapshot and access the inline extent item. However, before jumping to the 'out' label, we access the 'offset' and 'disk_bytenr' fields of the extent item, which should not be done for inline extents since the inlined data starts at the offset of the 'disk_bytenr' field and can be very small. For example accessing the 'offset' field of the file extent item results in the following trace: [ 599.705368] general protection fault: 0000 [#1] PREEMPT SMP [ 599.706296] Modules linked in: btrfs psmouse i2c_piix4 ppdev acpi_cpufreq serio_raw parport_pc i2c_core evdev tpm_tis tpm_tis_core sg pcspkr parport tpm button su$ [ 599.709340] CPU: 7 PID: 5283 Comm: btrfs Not tainted 4.10.0-rc8-btrfs-next-46+ #1 [ 599.709340] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 599.709340] task: ffff88023eedd040 task.stack: ffffc90006658000 [ 599.709340] RIP: 0010:read_extent_buffer+0xdb/0xf4 [btrfs] [ 599.709340] RSP: 0018:ffffc9000665ba00 EFLAGS: 00010286 [ 599.709340] RAX: db73880000000000 RBX: 0000000000000000 RCX: 0000000000000001 [ 599.709340] RDX: ffffc9000665ba60 RSI: db73880000000000 RDI: ffffc9000665ba5f [ 599.709340] RBP: ffffc9000665ba30 R08: 0000000000000001 R09: ffff88020dc5e098 [ 599.709340] R10: 0000000000001000 R11: 0000160000000000 R12: 6db6db6db6db6db7 [ 599.709340] R13: ffff880000000000 R14: 0000000000000000 R15: ffff88020dc5e088 [ 599.709340] FS: 00007f519555a8c0(0000) GS:ffff88023f3c0000(0000) knlGS:0000000000000000 [ 599.709340] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 599.709340] CR2: 00007f1411afd000 CR3: 0000000235f8e000 CR4: 00000000000006e0 [ 599.709340] Call Trace: [ 599.709340] btrfs_get_token_64+0x93/0xce [btrfs] [ 599.709340] ? printk+0x48/0x50 [ 599.709340] btrfs_get_64+0xb/0xd [btrfs] [ 599.709340] process_extent+0x3a1/0x1106 [btrfs] [ 599.709340] ? btree_read_extent_buffer_pages+0x5/0xef [btrfs] [ 599.709340] changed_cb+0xb03/0xb3d [btrfs] [ 599.709340] ? btrfs_get_token_32+0x7a/0xcc [btrfs] [ 599.709340] btrfs_compare_trees+0x432/0x53d [btrfs] [ 599.709340] ? process_extent+0x1106/0x1106 [btrfs] [ 599.709340] btrfs_ioctl_send+0x960/0xe26 [btrfs] [ 599.709340] btrfs_ioctl+0x181b/0x1fed [btrfs] [ 599.709340] ? trace_hardirqs_on_caller+0x150/0x1ac [ 599.709340] vfs_ioctl+0x21/0x38 [ 599.709340] ? vfs_ioctl+0x21/0x38 [ 599.709340] do_vfs_ioctl+0x611/0x645 [ 599.709340] ? rcu_read_unlock+0x5b/0x5d [ 599.709340] ? __fget+0x6d/0x79 [ 599.709340] SyS_ioctl+0x57/0x7b [ 599.709340] entry_SYSCALL_64_fastpath+0x18/0xad [ 599.709340] RIP: 0033:0x7f51945eec47 [ 599.709340] RSP: 002b:00007ffc21c13e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 599.709340] RAX: ffffffffffffffda RBX: ffffffff81096459 RCX: 00007f51945eec47 [ 599.709340] RDX: 00007ffc21c13f20 RSI: 0000000040489426 RDI: 0000000000000004 [ 599.709340] RBP: ffffc9000665bf98 R08: 00007f519450d700 R09: 00007f519450d700 [ 599.709340] R10: 00007f519450d9d0 R11: 0000000000000202 R12: 0000000000000046 [ 599.709340] R13: ffffc9000665bf78 R14: 0000000000000000 R15: 00007f5195574040 [ 599.709340] ? trace_hardirqs_off_caller+0x43/0xb1 [ 599.709340] Code: 29 f0 49 39 d8 4c 0f 47 c3 49 03 81 58 01 00 00 44 89 c1 4c 01 c2 4c 29 c3 48 c1 f8 03 49 0f af c4 48 c1 e0 0c 4c 01 e8 48 01 c6 <f3> a4 31 f6 4$ [ 599.709340] RIP: read_extent_buffer+0xdb/0xf4 [btrfs] RSP: ffffc9000665ba00 [ 599.762057] ---[ end trace fe00d7af61b9f49e ]--- This is because the 'offset' field starts at an offset of 37 bytes (offsetof(struct btrfs_file_extent_item, offset)), has a length of 8 bytes and therefore attemping to read it causes a 1 byte access beyond the end of the leaf, as the first item's content in a leaf is located at the tail of the leaf, the item size is 44 bytes and the offset of that field plus its length (37 + 8 = 45) goes beyond the item's size by 1 byte. So fix this by accessing the 'offset' and 'disk_bytenr' fields after jumping to the 'out' label if we are processing an inline extent. We move the reading operation of the 'disk_bytenr' field too because we have the same problem as for the 'offset' field explained above when the inline data is less then 8 bytes. The access to the 'generation' field is also moved but just for the sake of grouping access to all the fields. Fixes: e1cbfd7b ("Btrfs: send, fix file hole not being preserved due to inline extent") Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit b7f8a09f upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __btrfs_set_acl() into btrfs_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 07393101 CC: linux-btrfs@vger.kernel.org CC: David Sterba <dsterba@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit 609805d8 upstream. While punching a hole in a range that is not aligned with the sector size (currently the same as the page size) we can end up leaving an extent map in memory with a length that is smaller then the sector size or with a start offset that is not aligned to the sector size. Both cases are not expected and can lead to problems. This issue is easily detected after the patch from commit a7e3b975 ("Btrfs: fix reported number of inode blocks"), introduced in kernel 4.12-rc1, in a scenario like the following for example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -c "pwrite -S 0xaa -b 100K 0 100K" /mnt/foo $ xfs_io -c "fpunch 60K 90K" /mnt/foo $ xfs_io -c "pwrite -S 0xbb -b 100K 50K 100K" /mnt/foo $ xfs_io -c "pwrite -S 0xcc -b 50K 100K 50K" /mnt/foo $ umount /mnt After the unmount operation we can see several warnings emmitted due to underflows related to space reservation counters: [ 2837.443299] ------------[ cut here ]------------ [ 2837.447395] WARNING: CPU: 8 PID: 2474 at fs/btrfs/inode.c:9444 btrfs_destroy_inode+0xe8/0x27e [btrfs] [ 2837.452108] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button se rio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_gene ric raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [ 2837.458389] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1 [ 2837.459754] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 2837.462379] Call Trace: [ 2837.462379] dump_stack+0x68/0x92 [ 2837.462379] __warn+0xc2/0xdd [ 2837.462379] warn_slowpath_null+0x1d/0x1f [ 2837.462379] btrfs_destroy_inode+0xe8/0x27e [btrfs] [ 2837.462379] destroy_inode+0x3d/0x55 [ 2837.462379] evict+0x177/0x17e [ 2837.462379] dispose_list+0x50/0x71 [ 2837.462379] evict_inodes+0x132/0x141 [ 2837.462379] generic_shutdown_super+0x3f/0xeb [ 2837.462379] kill_anon_super+0x12/0x1c [ 2837.462379] btrfs_kill_super+0x16/0x21 [btrfs] [ 2837.462379] deactivate_locked_super+0x30/0x68 [ 2837.462379] deactivate_super+0x36/0x39 [ 2837.462379] cleanup_mnt+0x58/0x76 [ 2837.462379] __cleanup_mnt+0x12/0x14 [ 2837.462379] task_work_run+0x77/0x9b [ 2837.462379] prepare_exit_to_usermode+0x9d/0xc5 [ 2837.462379] syscall_return_slowpath+0x196/0x1b9 [ 2837.462379] entry_SYSCALL_64_fastpath+0xab/0xad [ 2837.462379] RIP: 0033:0x7f3ef3e6b9a7 [ 2837.462379] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 2837.462379] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7 [ 2837.462379] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910 [ 2837.462379] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015 [ 2837.462379] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64 [ 2837.462379] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0 [ 2837.519355] ---[ end trace e79345fe24b30b8d ]--- [ 2837.596256] ------------[ cut here ]------------ [ 2837.597625] WARNING: CPU: 8 PID: 2474 at fs/btrfs/extent-tree.c:5699 btrfs_free_block_groups+0x246/0x3eb [btrfs] [ 2837.603547] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button serio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [ 2837.659372] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1 [ 2837.663359] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 2837.663359] Call Trace: [ 2837.663359] dump_stack+0x68/0x92 [ 2837.663359] __warn+0xc2/0xdd [ 2837.663359] warn_slowpath_null+0x1d/0x1f [ 2837.663359] btrfs_free_block_groups+0x246/0x3eb [btrfs] [ 2837.663359] close_ctree+0x1dd/0x2e1 [btrfs] [ 2837.663359] ? evict_inodes+0x132/0x141 [ 2837.663359] btrfs_put_super+0x15/0x17 [btrfs] [ 2837.663359] generic_shutdown_super+0x6a/0xeb [ 2837.663359] kill_anon_super+0x12/0x1c [ 2837.663359] btrfs_kill_super+0x16/0x21 [btrfs] [ 2837.663359] deactivate_locked_super+0x30/0x68 [ 2837.663359] deactivate_super+0x36/0x39 [ 2837.663359] cleanup_mnt+0x58/0x76 [ 2837.663359] __cleanup_mnt+0x12/0x14 [ 2837.663359] task_work_run+0x77/0x9b [ 2837.663359] prepare_exit_to_usermode+0x9d/0xc5 [ 2837.663359] syscall_return_slowpath+0x196/0x1b9 [ 2837.663359] entry_SYSCALL_64_fastpath+0xab/0xad [ 2837.663359] RIP: 0033:0x7f3ef3e6b9a7 [ 2837.663359] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 2837.663359] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7 [ 2837.663359] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910 [ 2837.663359] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015 [ 2837.663359] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64 [ 2837.663359] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0 [ 2837.739445] ---[ end trace e79345fe24b30b8e ]--- [ 2837.745595] ------------[ cut here ]------------ [ 2837.746412] WARNING: CPU: 8 PID: 2474 at fs/btrfs/extent-tree.c:5700 btrfs_free_block_groups+0x261/0x3eb [btrfs] [ 2837.747955] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button serio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [ 2837.755395] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1 [ 2837.756769] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 2837.758526] Call Trace: [ 2837.758925] dump_stack+0x68/0x92 [ 2837.759383] __warn+0xc2/0xdd [ 2837.759383] warn_slowpath_null+0x1d/0x1f [ 2837.759383] btrfs_free_block_groups+0x261/0x3eb [btrfs] [ 2837.759383] close_ctree+0x1dd/0x2e1 [btrfs] [ 2837.759383] ? evict_inodes+0x132/0x141 [ 2837.759383] btrfs_put_super+0x15/0x17 [btrfs] [ 2837.759383] generic_shutdown_super+0x6a/0xeb [ 2837.759383] kill_anon_super+0x12/0x1c [ 2837.759383] btrfs_kill_super+0x16/0x21 [btrfs] [ 2837.759383] deactivate_locked_super+0x30/0x68 [ 2837.759383] deactivate_super+0x36/0x39 [ 2837.759383] cleanup_mnt+0x58/0x76 [ 2837.759383] __cleanup_mnt+0x12/0x14 [ 2837.759383] task_work_run+0x77/0x9b [ 2837.759383] prepare_exit_to_usermode+0x9d/0xc5 [ 2837.759383] syscall_return_slowpath+0x196/0x1b9 [ 2837.759383] entry_SYSCALL_64_fastpath+0xab/0xad [ 2837.759383] RIP: 0033:0x7f3ef3e6b9a7 [ 2837.759383] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 2837.759383] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7 [ 2837.759383] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910 [ 2837.759383] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015 [ 2837.759383] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64 [ 2837.759383] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0 [ 2837.777063] ---[ end trace e79345fe24b30b8f ]--- [ 2837.778235] ------------[ cut here ]------------ [ 2837.778856] WARNING: CPU: 8 PID: 2474 at fs/btrfs/extent-tree.c:9825 btrfs_free_block_groups+0x348/0x3eb [btrfs] [ 2837.791385] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button serio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [ 2837.797711] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1 [ 2837.798594] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 2837.800118] Call Trace: [ 2837.800515] dump_stack+0x68/0x92 [ 2837.801015] __warn+0xc2/0xdd [ 2837.801471] warn_slowpath_null+0x1d/0x1f [ 2837.801698] btrfs_free_block_groups+0x348/0x3eb [btrfs] [ 2837.801698] close_ctree+0x1dd/0x2e1 [btrfs] [ 2837.801698] ? evict_inodes+0x132/0x141 [ 2837.801698] btrfs_put_super+0x15/0x17 [btrfs] [ 2837.801698] generic_shutdown_super+0x6a/0xeb [ 2837.801698] kill_anon_super+0x12/0x1c [ 2837.801698] btrfs_kill_super+0x16/0x21 [btrfs] [ 2837.801698] deactivate_locked_super+0x30/0x68 [ 2837.801698] deactivate_super+0x36/0x39 [ 2837.801698] cleanup_mnt+0x58/0x76 [ 2837.801698] __cleanup_mnt+0x12/0x14 [ 2837.801698] task_work_run+0x77/0x9b [ 2837.801698] prepare_exit_to_usermode+0x9d/0xc5 [ 2837.801698] syscall_return_slowpath+0x196/0x1b9 [ 2837.801698] entry_SYSCALL_64_fastpath+0xab/0xad [ 2837.801698] RIP: 0033:0x7f3ef3e6b9a7 [ 2837.801698] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 2837.801698] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7 [ 2837.801698] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910 [ 2837.801698] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015 [ 2837.801698] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64 [ 2837.801698] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0 [ 2837.818441] ---[ end trace e79345fe24b30b90 ]--- [ 2837.818991] BTRFS info (device sdc): space_info 1 has 7974912 free, is not full [ 2837.819830] BTRFS info (device sdc): space_info total=8388608, used=417792, pinned=0, reserved=0, may_use=18446744073709547520, readonly=0 What happens in the above example is the following: 1) When punching the hole, at btrfs_punch_hole(), the variable tail_len is set to 2048 (as tail_start is 148Kb + 1 and offset + len is 150Kb). This results in the creation of an extent map with a length of 2Kb starting at file offset 148Kb, through find_first_non_hole() -> btrfs_get_extent(). 2) The second write (first write after the hole punch operation), sets the range [50Kb, 152Kb[ to delalloc. 3) The third write, at btrfs_find_new_delalloc_bytes(), sees the extent map covering the range [148Kb, 150Kb[ and ends up calling set_extent_bit() for the same range, which results in splitting an existing extent state record, covering the range [148Kb, 152Kb[ into two 2Kb extent state records, covering the ranges [148Kb, 150Kb[ and [150Kb, 152Kb[. 4) Finally at lock_and_cleanup_extent_if_need(), immediately after calling btrfs_find_new_delalloc_bytes() we clear the delalloc bit from the range [100Kb, 152Kb[ which results in the btrfs_clear_bit_hook() callback being invoked against the two 2Kb extent state records that cover the ranges [148Kb, 150Kb[ and [150Kb, 152Kb[. When called against the first 2Kb extent state, it calls btrfs_delalloc_release_metadata() with a length argument of 2048 bytes. That function rounds up the length to a sector size aligned length, so it ends up considering a length of 4096 bytes, and then calls calc_csum_metadata_size() which results in decrementing the inode's csum_bytes counter by 4096 bytes, so after it stays a value of 0 bytes. Then the same happens when btrfs_clear_bit_hook() is called against the second extent state that has a length of 2Kb, covering the range [150Kb, 152Kb[, the length is rounded up to 4096 and calc_csum_metadata_size() ends up being called to decrement 4096 bytes from the inode's csum_bytes counter, which at that time has a value of 0, leading to an underflow, which is exactly what triggers the first warning, at btrfs_destroy_inode(). All the other warnings relate to several space accounting counters that underflow as well due to similar reasons. A similar case but where the hole punching operation creates an extent map with a start offset not aligned to the sector size is the following: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -f -c "fpunch 695K 820K" $SCRATCH_MNT/bar $ xfs_io -c "pwrite -S 0xaa 1008K 307K" $SCRATCH_MNT/bar $ xfs_io -c "pwrite -S 0xbb -b 630K 1073K 630K" $SCRATCH_MNT/bar $ xfs_io -c "pwrite -S 0xcc -b 459K 1068K 459K" $SCRATCH_MNT/bar $ umount /mnt During the unmount operation we get similar traces for the same reasons as in the first example. So fix the hole punching operation to make sure it never creates extent maps with a length that is not aligned to the sector size nor with a start offset that is not aligned to the sector size, as this breaks all assumptions and it's a land mine. Fixes: d7781546 ("btrfs: Avoid trucating page or punching hole in a already existed hole.") Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Norris authored
commit 8535107a upstream. If we fail to add an interface in mwifiex_add_virtual_intf(), we might hit a BUG_ON() in the networking code, because we didn't tear things down properly. Among the problems: (a) when failing to allocate workqueues, we fail to unregister the netdev before calling free_netdev() (b) even if we do try to unregister the netdev, we're still holding the rtnl lock, so the device never properly unregistered; we'll be at state NETREG_UNREGISTERING, and then hit free_netdev()'s: BUG_ON(dev->reg_state != NETREG_UNREGISTERED); (c) we're allocating some dependent resources (e.g., DFS workqueues) after we've registered the interface; this may or may not cause problems, but it's good practice to allocate these before registering (d) we're not even trying to unwind anything when mwifiex_send_cmd() or mwifiex_sta_init_cmd() fail To fix these issues, let's: * add a stacked set of error handling labels, to keep error handling consistent and properly ordered (resolving (a) and (d)) * move the workqueue allocations before the registration (to resolve (c); also resolves (b) by avoiding error cases where we have to unregister) [Incidentally, it's pretty easy to interrupt the alloc_workqueue() in, e.g., the following: iw phy phy0 interface add mlan0 type station by sending it SIGTERM.] This bugfix covers commits like commit 7d652034 ("mwifiex: channel switch support for mwifiex"), but parts of this bug exist all the way back to the introduction of dynamic interface handling in commit 93a1df48 ("mwifiex: add cfg80211 handlers add/del_virtual_intf"). Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ankit Kumar authored
commit 4a16d1cb upstream. commit 9abdcccc ("pstore: Extract common arguments into structure") moved record decompression to function. decompress_record() gets called without checking type and compressed flag. Warning will be reported if data is uncompressed. Pstore type PSTORE_TYPE_PPC_OPAL, PSTORE_TYPE_PPC_COMMON doesn't contain compressed data and warning get printed part of dmesg. Partial dmesg log: [ 35.848914] pstore: ignored compressed record type 6 [ 35.848927] pstore: ignored compressed record type 8 Above warning should not get printed as it is known that data won't be compressed for above type and it is valid condition. This patch returns if data is not compressed and print warning only if data is compressed and type is not PSTORE_TYPE_DMESG. Reported-by:
Anton Blanchard <anton@au1.ibm.com> Signed-off-by:
Ankit Kumar <ankit@linux.vnet.ibm.com> Reviewed-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Fixes: 9abdcccc ("pstore: Extract common arguments into structure") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 4a4274bf upstream. In the stable linux-3.16 branch, I ran into a warning in the wlcore driver: drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write': drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Newer kernels no longer show the warning, but the bug is still there, as the allocation is based on the CPU page size rather than the actual capabilities of the hardware. This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes per buffer. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason A. Donenfeld authored
commit 329d8230 upstream. This file is filled with complex cryptography. Thus, the comparisons of MACs and secret keys and curve points and so forth should not add timing attacks, which could either result in a direct forgery, or, given the complexity, some other type of attack. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit 6a558f12 upstream. Sometimes a FUP packet is associated with a TSX transaction and a flag is set to indicate that. Ensure that flag is cleared on any error condition because at that point the decoder can no longer assume it is correct. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-9-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit 622b7a47 upstream. The decoder will try to use branch packets to find an IP to start decoding or to recover from errors. Currently the FUP packet is used only in the case of an overflow, however there is no reason for that to be a special case. So just use FUP always when scanning for an IP. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-8-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit f952eace upstream. Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is not updated when a branch target has been suppressed, which is indicated by IPBytes == 0. IPBytes is stored in the packet 'count', so ensure never to set 'last_ip' when packet 'count' is zero. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-7-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit ee14ac0e upstream. Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is considered to be reset to zero whenever there is a synchronization packet (PSB). The decoder wasn't doing that, and was treating the zero value to mean that there was no last IP, whereas compression can be done against the zero value. Fix by setting last_ip to zero when a PSB is received and keep track of have_last_ip. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-6-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit ad7167a8 upstream. A value of zero is used to indicate that there is no IP. Ensure the value is zero when the state is INTEL_PT_STATE_NO_IP. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-5-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit 12b70806 upstream. The return compression stack must be cleared whenever there is a PSB. Fix one case where that was not happening. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-4-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit 3f04d98e upstream. The decoder uses its current timestamp in samples. Usually that is a timestamp that has already passed, but in some cases it is a timestamp for a branch that the decoder is walking towards, and consequently hasn't reached. Improve that situation by using the pkt_state to determine when to use the current or previous timestamp. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-3-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit 22c06892 upstream. Move decoder error setting into one condition. Cc'ed to stable because later fixes depend on it. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-2-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mateusz Jurczyk authored
commit f6a5885f upstream. Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() handlers of the AF_NFC socket. Since the syscall doesn't enforce a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing .sa_family. Signed-off-by:
Mateusz Jurczyk <mjurczyk@google.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mateusz Jurczyk authored
commit 608c4adf upstream. Fix the sockaddr length verification in the connect() handler of NFC/LLCP sockets, to compare against the size of the actual structure expected on input (sockaddr_nfc_llcp) instead of its shorter version (sockaddr_nfc). Both structures are defined in include/uapi/linux/nfc.h. The fields specific to the _llcp extended struct are as follows: 276 __u8 dsap; /* Destination SAP, if known */ 277 __u8 ssap; /* Source SAP to be bound to */ 278 char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */; 279 size_t service_name_len; If the caller doesn't provide a sufficiently long sockaddr buffer, these fields remain uninitialized (and they currently originate from the stack frame of the top-level sys_connect handler). They are then copied by llcp_sock_connect() into internal storage (nfc_llcp_sock structure), and could be subsequently read back through the user-mode getsockname() function (handled by llcp_sock_getname()). This would result in the disclosure of up to ~70 uninitialized bytes from the kernel stack to user-mode clients capable of creating AFC_NFC sockets. Signed-off-by:
Mateusz Jurczyk <mjurczyk@google.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mateusz Jurczyk authored
commit a0323b97 upstream. Check that the NFC_ATTR_TARGET_INDEX and NFC_ATTR_PROTOCOLS attributes (in addition to NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to accessing them. This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Signed-off-by:
Mateusz Jurczyk <mjurczyk@google.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 45dd39b9 upstream. The nci-device was never deregistered in the event that fw-initialisation failed. Fix this by moving the firmware initialisation before device registration since the firmware work queue should be available before registering. Note that this depends on a recent fix that moved device-name initialisation back to to nci_allocate_device() as the firmware-workqueue name is now derived from the nfc-device name. Fixes: 3194c687 ("NFC: nfcmrvl: add firmware download support") Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit e5834ac2 upstream. Use the nfc- rather than phy-device in firmware-management code that needs a valid struct device. This specifically fixes a NULL-pointer dereference in nfcmrvl_fw_dnld_init() during registration when the underlying tty is one end of a Unix98 pty. Note that the driver still uses the phy device for any debugging, which is fine for now. Fixes: 3194c687 ("NFC: nfcmrvl: add firmware download support") Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 0cbe4011 upstream. This specifically fixes resource leaks in the registration error paths. Device-managed resources is a bad fit for this driver as devices can be registered from the n_nci line discipline. Firstly, a tty may not even have a corresponding device (should it be part of a Unix98 pty) something which would lead to a NULL-pointer dereference when registering resources. Secondly, if the tty has a class device, its lifetime exceeds that of the line discipline, which means that resources would leak every time the line discipline is closed (or if registration fails). Currently, the devres interface was only being used to request a reset gpio despite the fact that it was already explicitly freed in nfcmrvl_nci_unregister_dev() (along with the private data), something which also prevented the resource leak at close. Note that the driver treats gpio number 0 as invalid despite it being perfectly valid. This will be addressed in a follow-up patch. Fixes: b2fe288e ("NFC: nfcmrvl: free reset gpio") Fixes: 4a2b947f ("NFC: nfcmrvl: add chip reset management") Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 15e0c59f upstream. Make sure to check the tty-device pointer before trying to access the parent device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: e097dc62 ("NFC: nfcmrvl: add UART driver") Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 20777bc5 upstream. Commit 7eda8b8e ("NFC: Use IDR library to assing NFC devices IDs") moved device-id allocation and struct-device initialisation from nfc_allocate_device() to nfc_register_device(). This broke just about every nfc-device-registration error path, which continue to call nfc_free_device() that tries to put the device reference of the now uninitialised (but zeroed) struct device: kobject: '(null)' (ce316420): is not initialized, yet kobject_put() is being called. The late struct-device initialisation also meant that various work queues whose names are derived from the nfc device name were also misnamed: 421 root 0 SW< [(null)_nci_cmd_] 422 root 0 SW< [(null)_nci_rx_w] 423 root 0 SW< [(null)_nci_tx_w] Move the id-allocation and struct-device initialisation back to nfc_allocate_device() and fix up the single call site which did not use nfc_free_device() in its error path. Fixes: 7eda8b8e ("NFC: Use IDR library to assing NFC devices IDs") Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emmanuel Grumbach authored
commit 6b28f978 upstream. In BSS mode in the disconnection flow, mac80211 removes the AP station before the vif is set to unassociated. Our firmware wants it the other way around: first set the vif as unassociated, and then remove the AP station. In order to bridge between those two different behaviors, iwlmvm doesn't remove the station from the firmware when mac80211 removes it, but only after the vif is set to unassociated. The implementation is in iwl_mvm_bss_info_changed_station: if (assoc state was modified && mvmvif->ap_sta_id is VALID && assoc state is now UNASSC) remove_the_station_from_the_firmware() During the recovery flow, mac80211 re-adds the AP station and then reconfigures the vif. Since the vif is not associated, and then, we enter the if above (which was intended to be taken in the disconnection flow only) and remove the station we just added. This defeats the recovery flow. Fix this by not removing the AP station in this flow if we are in recovery flow. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqing Pan authored
commit 07246c11 upstream. The bug was triggered when do suspend/resuming continuously on Dell XPS L322X/0PJHXN version 9333 (2013) with kernel 4.12.0-041200rc4-generic. But can't reproduce on DELL E5440 + AR9300 PCIE chips. The warning is caused by accessing invalid pointer sc->rng_task. sc->rng_task is not be cleared after kthread_stop(sc->rng_task) be called in ath9k_rng_stop(). Because the kthread is stopped before ath9k_rng_kthread() be scheduled. So set sc->rng_task to null after kthread_stop(sc->rng_task) to resolve this issue. WARNING: CPU: 0 PID: 984 at linux/kernel/kthread.c:71 kthread_stop+0xf1/0x100 CPU: 0 PID: 984 Comm: NetworkManager Not tainted 4.12.0-041200rc4-generic #201706042031 Hardware name: Dell Inc. Dell System XPS L322X/0PJHXN, BIOS A09 05/15/2013 task: ffff950170fdda00 task.stack: ffffa22c01538000 RIP: 0010:kthread_stop+0xf1/0x100 RSP: 0018:ffffa22c0153b5b0 EFLAGS: 00010246 RAX: ffffffffa6257800 RBX: ffff950171b79560 RCX: 0000000000000000 RDX: 0000000080000000 RSI: 000000007fffffff RDI: ffff9500ac9a9680 RBP: ffffa22c0153b5c8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffa22c0153b648 R11: ffff9501768004b8 R12: ffff9500ac9a9680 R13: ffff950171b79f70 R14: ffff950171b78780 R15: ffff9501749dc018 FS: 00007f0d6bfd5540(0000) GS:ffff95017f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc190161a08 CR3: 0000000232906000 CR4: 00000000001406f0 Call Trace: ath9k_rng_stop+0x1a/0x20 [ath9k] ath9k_stop+0x3b/0x1d0 [ath9k] drv_stop+0x33/0xf0 [mac80211] ieee80211_stop_device+0x43/0x50 [mac80211] ieee80211_do_stop+0x4f2/0x810 [mac80211] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196043Reported-by:
Giulio Genovese <giulio.genovese@gmail.com> Tested-by:
Giulio Genovese <giulio.genovese@gmail.com> Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqing Pan authored
commit bde717ab upstream. The hard coded register 0x9864 and 0x9924 are invalid for ar9300 chips. Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqing Pan authored
commit cf8ce1ea upstream. One scenario that could lead to UAF is two threads writing simultaneously to the "tx99" debug file. One of them would set the "start" value to true and follow to ath9k_tx99_init(). Inside the function it would set the sc->tx99_state to true after allocating sc->tx99skb. Then, the other thread would execute write_file_tx99() and call ath9k_tx99_deinit(). sc->tx99_state would be freed. After that, the first thread would continue inside ath9k_tx99_init() and call r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl); that would make use of the freed sc->tx99_skb memory. Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Viresh Kumar authored
commit 289d72af upstream. After the lock is dropped, it is possible that the cpufreq_dev gets freed before we call get_level() and that can cause kernel to crash. Drop the lock after we are done using the structure. Fixes: 02373d7c ("thermal: cpu_cooling: fix lockdep problems in cpu_cooling") Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Lukasz Luba <lukasz.luba@arm.com> Tested-by:
Lukasz Luba <lukasz.luba@arm.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit c592fafb upstream. The thermal child device reuses the parent MFD-device device-tree node when registering a thermal zone, but did not take a reference to the node. This leads to a reference imbalance, and potential use-after-free, when the node reference is dropped by the platform-bus device destructor (once for the child and later again for the parent). Fix this by dropping any reference already held to a device-tree node and getting a reference to the parent's node which will be balanced on reprobe or on platform-device release, whichever comes first. Note that simply clearing the of_node pointer on probe errors and on driver unbind would not allow the use of device-managed resources as specifically thermal_zone_of_sensor_unregister() claims that a valid device-tree node pointer is needed during deregistration (even if it currently does not seem to use it). Fixes: ec4664b3 ("thermal: max77620: Add thermal driver for reporting junction temp") Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mauro Carvalho Chehab authored
commit a16e3772 upstream. Gcc 7.1 complains about: drivers/media/platform/s5p-jpeg/jpeg-core.c: In function 's5p_jpeg_parse_hdr.isra.9': drivers/media/platform/s5p-jpeg/jpeg-core.c:1207:12: warning: 'width' may be used uninitialized in this function [-Wmaybe-uninitialized] result->w = width; ~~~~~~~~~~^~~~~~~ drivers/media/platform/s5p-jpeg/jpeg-core.c:1208:12: warning: 'height' may be used uninitialized in this function [-Wmaybe-uninitialized] result->h = height; ~~~~~~~~~~^~~~~~~~ Indeed the code would allow it to return a random value (although it shouldn't happen, in practice). So, explicitly set both to zero, just in case. Acked-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit bd7e31bb upstream. gcc-7 suggests that an expression using a bitwise not and a bitmask on a 'bool' variable is better written using boolean logic: drivers/media/rc/imon.c: In function 'imon_incoming_scancode': drivers/media/rc/imon.c:1725:22: error: '~' on a boolean expression [-Werror=bool-operation] ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1; ^ drivers/media/rc/imon.c:1725:22: note: did you mean to use logical not? I agree. Fixes: 21677cfc ("V4L/DVB: ir-core: add imon driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit bd664f6b upstream. I made the mistake of upgrading my desktop to the new Fedora 26 that comes with gcc-7.1.1. There's nothing wrong per se that I've noticed, but I now have 1500 lines of warnings, mostly from the new format-truncation warning triggering all over the tree. We use 'snprintf()' and friends in a lot of places, and often know that the numbers are fairly small (ie a controller index or similar), but gcc doesn't know that, and sees an 'int', and thinks that it could be some huge number. And then complains when our buffers are not able to fit the name for the ten millionth controller. These warnings aren't necessarily bad per se, and we probably want to look through them subsystem by subsystem, but at least during the merge window they just mean that I can't even see if somebody is introducing any *real* problems when I pull. So warnings disabled for now. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 Jul, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-