Skip to content

L
linux
Switch branch/tag
  1. 02 Aug, 2004 23 commits
  3. 01 Aug, 2004 6 commits
  5. 31 Jul, 2004 11 commits
    • James Morris's avatar
      [CRYPTO]: Add i586 optimized AES · 817bbc47
      James Morris authored 
      Below is an updated version of patch from Fruhwirth which integrates the 
Gladman AES code into the crypto API.

I've tried to ensure that this is done as simply as possible: the user 
gets the asm version by default if it's suitable.

I've also now added the alternate GPL licensing provided by Brian Gladman, 
and licensed the code as GPL.
Signed-off-by: default avatarJames Morris <jmorris@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@redhat.com>
      817bbc47
    • Bert Hubert's avatar
      [IPSEC]: Fix UDP decap code. · 8f49b589
      Bert Hubert authored 
      The missing break causes the packet to be tested against
both encapsulation types, one will always fail.
Signed-off-by: default avatarbert hubert <ahu@ds9a.nl>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarDavid S. Miller <davem@redhat.com>
      8f49b589
    • Herbert Xu's avatar
      [PF_KEY]: spirange should be in host byte order. · 0797db20
      Herbert Xu authored 
      I'm looking through the xfrm_alloc_spi stuff and noticed that the
netlink alloc_spi function takes the range in host order while the
PFKEY alloc_spi function takes them in network order.

First I thought that I stuffed up since I was the one who changed
the code in the netlink interface to take them in host order :)

But reading RFC 2367 seems to indicate otherwise.  It says that all
fields are host order unless specified otherwise.  And the spirange
fields are not specified to be network order at all.

Looking at the existing PFKEY users:

User Space
----------
Openswan - Doesn't use PFKEY for this.
Racoon - Puts zeros in there so it doesn't care.  However its test-pfkey
	 program stores things in host order.
ISAKMPD - Stores things in host order.

So the conclusion is that we can and should change our PFKEY
implementation to use host order for these fields.

This patch does exactly that.
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarDavid S. Miller <davem@redhat.com>
      0797db20
    • Herbert Xu's avatar
      [IPSEC]: xfrm_alloc_spi always succeeds on non-trivial range · 3860b281
      Herbert Xu authored 
      xfrm_alloc_spi will always succeed if minspi < maxspi, even if
minspi + 1 == maxspi.  If the range is already occupied this
will obviously lead to breakage.

Of course this is very unlikely to occur in reality due to the
size of the range.  Although with IPCOMP it might actually happen
on a very large server.

The fix is obivous.
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarDavid S. Miller <davem@redhat.com>
      3860b281
    • Herbert Xu's avatar
      [IPSEC]: Remove redundant check in xfrm_state_add() · 5eb968f9
      Herbert Xu authored 
      This is the patch referred to in the netlink_get_spi thread.

I was actually wrong about the reason for this patch though.  Firstly
it's the SPI check that is redundant and not the find_acq() call.
And it's redundant because of the find_acq() patch, not because
of the fact that this is in xfrm_state_add().

Now that find_acq() only returns SAs with SPIs, we don't need to
check this in xfrm_state_add() anymore.

We do still need the call though to clean up leftover larval states.

Another side-effect of the change is that we can move the existence
check above find_acq() since find_acq() will never return any SAs
matching the SPI we're trying to add (It doesn't need to because if
an SA with a matching SPI existed, it would've been returned by
state_lookup() already).
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarDavid S. Miller <davem@redhat.com>
      5eb968f9
    • Herbert Xu's avatar
      [IPSEC]: Fix SPI generation by netlink_get_spi() · 94408b14
      Herbert Xu authored 
      The issue is that two successive calls to netlink_get_spi is returning
the same SA.  Since netlink_get_spi is meant to be a creation operation
this is incorrect.

The netlink_get_spi operation is modelled off the PFKEY SADB_GETSPI
command which is specified in RFC 2367.  The purpose of SADB_GETSPI
is to create a new larval SA that can then be filled in by SADB_UPDATE.

Its semantics does not allow two SADB_GETSPI calls to return the same
SA, even if there is no SADB_UPDATE call in between.

The reason the second netlink_get_spi is returning the same SA is
because in find_acq(), the code is looking at all larval states as
opposed to only larval states with an SPI of zero.

Since the only other caller of find_acq() -- xfrm_state_add() intentionally
ignores all return values with a non-zero SPI, it is safe to not look at
SAs with non-zero SPIs at all in find_acq().

The following patch does exactly that.

In fact, the find_acq() call in xfrm_state_add() is a remnant from
the days when we had xfrm_state_replace() instead of xfrm_state_add()
and xfrm_state_update().  It can now be safely removed.

I'll post a separate patch for that.
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarDavid S. Miller <davem@redhat.com>
      94408b14
    • David S. Miller's avatar
      Merge http://linux-mh.bkbits.net/bluetooth-2.6 · 02160d32
      David S. Miller authored 
      into nuts.davemloft.net:/disk1/BK/net-2.6
      02160d32
    • Marcel Holtmann's avatar
      [Bluetooth] Fix resetting to default filters · 1317c324
      Marcel Holtmann authored 
      The problem is that after a successful connection between the Windows
Bluetooth stack and the Linux Bluez stack, no packets from the device
ever reach the PC running Windows XP Service Pack 2. That is, a ping
from the PC never receives a response, and a ping from BlueZ never
reaches the PC. Linux packet statistics show that the PC packets are
received, but all return traffic seems to be routed over the loopback
interface.

Immediately after creating the BNEP connection with BlueZ, the Windows
Bluetooth stack sends a BNEP_FILTER_NET_TYPE_SET_MSG with an effective
length of zero. BlueZ interprets this message to mean that no filter
ranges should be allowed. The code zeros the first entry in the filter
list, which is than interpreted as meaning that no ranges of acceptable
packets are available. This interpretation is wrong and leads to all
packets being rejected by BNEP.

The Bluetooth BNEP specification clearly states the following:

The length (in octets) of this message is 4+4*N, where N is the number
of disjoint ranges of Networking protocol types that form the complete
set. Note that N=0 (empty set) denotes a reset to default filters (if
any) supported by the remote device.
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      1317c324
    • David S. Miller's avatar
      Merge nuts.davemloft.net:/disk1/BK/network-2.6 · d9fde4ea
      David S. Miller authored 
      into nuts.davemloft.net:/disk1/BK/net-2.6
      d9fde4ea
    • Marcel Holtmann's avatar
      [Bluetooth] Send HCI_Reset for ISSC USB dongles · c8f53798
      Marcel Holtmann authored 
      For the USB dongles from ISSC the first command must be a HCI_Reset,
because otherwise the inquiry procedures won't work.
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      c8f53798
    • Linus Torvalds's avatar
      Merge bk://cifs.bkbits.net/linux-2.5cifs · 70a83a8c
      Linus Torvalds authored 
      into ppc970.osdl.org:/home/torvalds/v2.6/linux
      70a83a8c
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7