Add support for EAPD on system suspend and disabling EAPD on headphone jack
detection for STAC_DELL_M6 laptops.

This patch fixes the regressions, the silent output on HP of some Dell
laptops (see Novell bnc#446025):
	https://bugzilla.novell.com/show_bug.cgi?id=446025Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use cached write for setting the GPIO unsolicited event mask to be
restored properly at resume.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the quirk entries for HP Pavilion DV5 and DV7 with model=hp-m4.

Reference: Novell bnc#445321, bnc#445161
	https://bugzilla.novell.com/show_bug.cgi?id=445321
	https://bugzilla.novell.com/show_bug.cgi?id=445161Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fixed the GPIO mask and co initialization in patch_stac92hd71bxx()
so that the gpio_maks for HP_M4 model is set properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Check board preset model instead of codec->subsystem_id in
patch_92hd71bxx() so that other hardwares configured via the model
option work like the given model.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Changed value for STAC_VREF_EVENT from 0x40 to 0x00 because the
unsol response value is only 6-bits width and the former value
was 1<<6 which is an overrun.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added a NULL check of input_allocate_device() in hda_beep.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The digital beep widget may have no mute control, and always enabling
the beep is ofen pretty annoying, especially on laptops.

This patch adds a mixer control "PC Beep Playback Switch" when there
is no mixer amp mute is found, and controls it on software.

Reference: Novell bnc#444572
	https://bugzilla.novell.com/show_bug.cgi?id=444572Signed-off-by: Takashi Iwai <tiwai@suse.de>

Due to the recent change for multiple HP as line-out switch, only
one of the multiple headphons (usually a wrong one) is toggled
and the other pins are still disabled.  This causes the silent output
problem on some Dell laptops.

Also, the hp_switch check is screwed up when a line-in or a mic-in
jack exists.  This is added as an additional output, but hp_switch
check doesn't take it into account.

This patch fixes these issues: simplify hp_switch check by using
the NID instead of bool, and clean up / fix the toggle of HP pins
in unsol event handler code.

Reference: Novell bnc#443267
	https://bugzilla.novell.com/show_bug.cgi?id=443267Signed-off-by: Takashi Iwai <tiwai@suse.de>

The input pins are sometimes not initialized properly because
of the optimization check of the current pinctl code.

Force to initialize the mic input pins so that they can be set up
properly even if they were in a weird state.  But keep other input
pins if already set up as input, since this could be an extra mic
pin.

Reference: Novell bnc#443738
	https://bugzilla.novell.com/show_bug.cgi?id=443738Signed-off-by: Takashi Iwai <tiwai@suse.de>

The creation of analog-mux mixer element is missing in
patch_stac9200() due to the dynamic allocation patch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added a QUIRK to patch_analog.c for the HP Elitebook 8530p
(IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default.
Playback and Capture confirmed working.
Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added model=laptop for another HP machine (103c:3614) with AD1884A
codec.
Signed-off-by: Michel Marti <mma@objectxp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use model=lenovo-ms7195-dig for MEDION MD96630 laptop (17c0:4085)
with ALC888 codec.
Reference: Novell bnc#412548
	https://bugzilla.novell.com/show_bug.cgi?id=412528Signed-off-by: Takashi Iwai <tiwai@suse.de>

Limit the number of GPIOs shown in proc.  Otherwise it gets too long
unnecessarily, and hard to analyze.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add support for explicitly enabling the EQ distortion hack for
systems without software biquad support.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added a quirk for another Acer Aspier laptop (1025:0090) with ALC883
codec.  Reported in Novell bnc#426935:
    https://bugzilla.novell.com/show_bug.cgi?id=426935Signed-off-by: Takashi Iwai <tiwai@suse.de>

The digital mic wasn't detected properly for ALC269 auto-probing mode
because of its widget number.  Fixed now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent addition of automatic mic-muting is broken in some cases.
The code assumes that the pin nids <= 0x18, but the digital pins can
be less than 0x18.
Also, it assumes the front-mic being the internal mic, but it depends
on the hardware implementation actually.

Instead of complex case-fixes, better to disable the code as now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The current snd-hda-intel driver seems blocking the power-off on some
devices like eeepc.  Although this is likely a BIOS problem, we can add
a workaround by disabling IRQ lines before power-off operation.
This patch adds the reboot notifier to achieve it.

The detailed problem description is found in bug#11889:
    http://bugme.linux-foundation.org/show_bug.cgi?id=11889Tested-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The SPDIF mute switch code seems broken.  It doesn't set unmute bits
properly.  Also it contains the duplicated lines (merge error?) to be
cleaned up.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add Wolfson Microelectronics to the HDA vendor ID table.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added a quirk entry for another HP mobile device with AD1884A codec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some machines have broken BIOS resume that doesn't restore the default
pin configuration properly, which results in a wrong detection of HP
pin.  This causes a silent speaker output due to missing HP detection.
Related bug: Novell bug#406101
	https://bugzilla.novell.com/show_bug.cgi?id=406101

This patch fixes the issue by saving/restoring the default pin configs
by the driver itself.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Noticed by sparse:
sound/pci/hda/patch_sigmatel.c:1285:43: warning: dubious: !x & y
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALC260 auto-parsing mode may create multiple controls for the same volume
widget (0x08 and 0x09) depending on the pin.  For example, Front and
Headphone volumes may control the same volume, just the latter one wins.

This patch adds a proper check of the existing of the volume control
and avoid the doulbed creation of the same volume controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the missing PCM type for Nvidia HDMI devices so that they point
the right device number.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

- Fix Toshiba S06 SSID to 1179:ff7b
- Fix ASUS G50V quirk name
- Add ASUS N20 quirk
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the support of ALC272 codec.  It's almost compatible with ALC663.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added ALC887 support.  It's almost compatible with ALC883/888.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add ALC1200 codec support.  Almost compatible with ALC888.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASUS M90V has PCI SSID 1043:1873.  Corrected in the quirk list.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the automatic mic switch via jack sensing in auto-probe mode
for Realtek codecs.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fixed compiler warning with possible uninitialized variable 'nid'.

  CC [M]  /home/mranostay/git/alsa-driver/pci/hda/patch_sigmatel.o
/home/mranostay/git/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c: In function
‘stac92xx_parse_auto_config’:
/home/mranostay/git/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2815: warning: ‘nid’ may be used
uninitialized in this function
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Corrected invalid mixer index values on the 92hd71bxxx codec branch.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add support for mixers on the analog mixer on some 92hd75xx codecs,
along with adding a 'Mixer' entry for it's connection on the dmux.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add support for powering down VREF on standard headphone insertion, also
powers up the VREF on a headset insertion.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Set the third microphone to a default config of a 'Line In' to be
added the Input Source Mux's.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Since there are now multiple OpenMoko platforms it is more important to
check that the machine driver is running on the correct system.  This
was orgininally generated as part of the initial GTA02 machine port.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Ingo reported Oops at probing mtpav driver.  It's a race between
the irq handler and the rawmidi instance registration.

This patch fixes the order of registration to avoid the race.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>