- 27 Apr, 2012 36 commits
-
-
Al Viro authored
commit 6ed3cf2c upstream. ->root_flags is __le64 and all accesses to it go through the helpers that do proper conversions. Except for btrfs_root_readonly(), which checks bit 0 as in host-endian... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit efe39651 upstream. Restore the original logics ("fail on mountpoints, negatives and in case of fh_compose() failures"). Since commit 8177e (nfsd: clean up readdirplus encoding) that got broken - rv = fh_compose(fhp, exp, dchild, &cd->fh); if (rv) goto out; if (!dchild->d_inode) goto out; rv = 0; out: is equivalent to rv = fh_compose(fhp, exp, dchild, &cd->fh); out: and the second check has no effect whatsoever... Signed-off-by:
-
Gertjan van Wingerde authored
commit bc93eda7 upstream. According to the latest USB ID database these are all RT2770 / RT2870 / RT307x devices. Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Alan Cox authored
commit 3ac44670 upstream. Just another USB identifier. Signed-off-by:
Alan Cox <alan@linux.intel.com> Acked-by:
-
Gertjan van Wingerde authored
commit c18b7806 upstream. This is reported to be an RT3070 based device. Reported-by:
Teika Kazura <teika@lavabit.com> Signed-off-by:
-
Eduardo Bacchi Kienetz authored
commit 43bf8c24 upstream. Belkin's Connect N150 Wireless USB Adapter, model F7D1101 version 2, uses ID 0x945b. Chipset info: rt: 3390, rf: 000b, rev: 3213. I have just bought one, which started to work perfectly after the ID was added through this patch. Signed-off-by:
Eduardo Bacchi Kienetz <eduardo@kienetz.com> Acked-by:
-
Gertjan van Wingerde authored
commit acb56120 upstream. Sitecom WLA4000 (USB ID 0x0df6:0x0060) is an RT3072 chipset. Sitecom WLA5000 (USB ID 0x0df6:0x0062) is an RT3572 chipset. Signed-off-by:
-
Laurent Pinchart authored
commit 178db7d3 upstream. Device are added as children of the bus master's parent device, but spi_unregister_master() looks for devices to unregister in the bus master's children. This results in the child devices not being unregistered. Fix this by registering devices as direct children of the bus master. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Cc: Takahiro AKASHI <akashi@jp.fujitsu.com> Signed-off-by:
-
Jason Baron authored
commit 93dc6107 upstream. Commit 28d82dc1 ("epoll: limit paths") that I did to limit the number of possible wakeup paths in epoll is causing a few applications to longer work (dovecot for one). The original patch is really about limiting the amount of epoll nesting (since epoll fds can be attached to other fds). Thus, we probably can allow an unlimited number of paths of depth 1. My current patch limits it at 1000. And enforce the limits on paths that have a greater depth. This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578Signed-off-by:
Jason Baron <jbaron@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
AceLan Kao authored
commit 55ed7d4d upstream. Add another vendor specific ID for Atheros AR3012 device. This chip is wrapped by Lite-On Technology Corp. output of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3005 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
Gustavo Padovan <gustavo@padovan.org> Signed-off-by:
-
Al Viro authored
commit af1584f5 upstream. ->ee_len is __le16, so assigning cpu_to_le32() to it is going to do Bad Things(tm) on big-endian hosts... Signed-off-by:
-
Thomas Jarosch authored
commit f67fd55f upstream. Some BIOS implementations leave the Intel GPU interrupts enabled, even though no one is handling them (f.e. i915 driver is never loaded). Additionally the interrupt destination is not set up properly and the interrupt ends up -somewhere-. These spurious interrupts are "sticky" and the kernel disables the (shared) interrupt line after 100.000+ generated interrupts. Fix it by disabling the still enabled interrupts. This resolves crashes often seen on monitor unplug. Tested on the following boards: - Intel DH61CR: Affected - Intel DH67BL: Affected - Intel S1200KP server board: Affected - Asus P8H61-M LE: Affected, but system does not crash. Probably the IRQ ends up somewhere unnoticed. According to reports on the net, the Intel DH61WW board is also affected. Many thanks to Jesse Barnes from Intel for helping with the register configuration and to Intel in general for providing public hardware documentation. Signed-off-by:
Thomas Jarosch <thomas.jarosch@intra2net.com> Tested-by:
Charlie Suffin <charlie.suffin@stratus.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Shubhrajyoti D authored
commit ad579699 upstream. pm_runtime_get_sync returns a signed integer. In case of errors it returns a negative value. This patch fixes the error check by making it signed instead of unsigned thus preventing register access if get_sync_fails. Also passes the error cause to the debug message. Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
commit 3006dc8c upstream. pm_runtime_enable is being called after omap2430_musb_init. Hence pm_runtime_get_sync in omap2430_musb_init does not have any effect (does not enable clocks) resulting in a crash during register access. It is fixed here. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Andrzej Pietrasiewicz authored
commit 92b0abf8 upstream. usb: gadget: eliminate NULL pointer dereference (bugfix) This patch fixes a bug which causes NULL pointer dereference in ffs_ep0_ioctl. The bug happens when the FunctionFS is not bound (either has not been bound yet or has been bound and then unbound) and can be reproduced with running the following commands: $ insmod g_ffs.ko $ mount -t functionfs func /dev/usbgadget $ ./null where null.c is: #include <fcntl.h> #include <linux/usb/functionfs.h> int main(void) { int fd = open("/dev/usbgadget/ep0", O_RDWR); ioctl(fd, FUNCTIONFS_CLEAR_HALT); return 0; } Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Alan Stern authored
commit 8963c487 upstream. This patch (as154) fixes a self-deadlock that occurs when userspace writes to the bConfigurationValue sysfs attribute for a hub with children. The task tries to lock the bandwidth_mutex at a time when it already owns the lock: The attribute's method calls usb_set_configuration(), which calls usb_disable_device() with the bandwidth_mutex held. usb_disable_device() unregisters the existing interfaces, which causes the hub driver to be unbound. The hub_disconnect() routine calls hub_quiesce(), which calls usb_disconnect() for each of the hub's children. usb_disconnect() attempts to acquire the bandwidth_mutex around a call to usb_disable_device(). The solution is to make usb_disable_device() acquire the mutex for itself instead of requiring the caller to hold it. Then the mutex can cover only the bandwidth deallocation operation and not the region where the interfaces are unregistered. This has the potential to change system behavior slightly when a config change races with another config or altsetting change. Some of the bandwidth released from the old config might get claimed by the other config or altsetting, make it impossible to restore the old config in case of a failure. But since we don't try to recover from config-change failures anyway, this doesn't matter. [This should be marked for stable kernels that contain the commit fccf4e86 "USB: Free bandwidth when usb_disable_device is called." That commit was marked for stable kernels as old as 2.6.32.] Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Alan Stern authored
commit 2fbe2bf1 upstream. This patch (as1544) fixes a problem affecting some EHCI controllers. They can generate interrupts whenever the STS_FLR status bit is turned on, even though that bit is masked out in the Interrupt Enable register. Since the driver doesn't use STS_FLR anyway, the patch changes the interrupt routine to clear that bit whenever it is set, rather than leaving it alone. Signed-off-by:
Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by:
-
Bjørn Mork authored
commit 749541d1 upstream. These devices have a number of non serial interfaces as well. Use the existing "Direct IP" blacklist to prevent binding to interfaces which are handled by other drivers. We also extend the "Direct IP" blacklist with with interfaces only seen in "QMI" mode, assuming that these devices use the same interface numbers for serial interfaces both in "Direct IP" and in "QMI" mode. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Julia Lawall authored
commit d3a7b83f upstream. tty_unlock is used on all other exits from the function. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Tomoya MORINAGA authored
commit af6d17cd upstream. This driver anticipates pch_uart_verify_port() is not called during installation. However, actually pch_uart_verify_port() is called during installation. As a result, memory access violation occurs like below. 0. initial value: use_dma=0 1. starup() - dma channel is not allocated because use_dma=0 2. pch_uart_verify_port() - Set use_dma=1 3. UART processing acts DMA mode because use_dma=1 - memory access violation occurs! This patch fixes the issue. Solution: Whenever pch_uart_verify_port() is called and then dma channel is not allocated, the channel should be allocated. Signed-off-by:
-
Yuri Matylitski authored
commit 2d5733fc upstream. Fixed too small hardcoded timeout values for usb_control_msg in driver for SiliconLabs cp210x-based usb-to-serial adapters. Replaced with USB_CTRL_GET_TIMEOUT/USB_CTRL_SET_TIMEOUT. Signed-off-by:
Yuri Matylitski <ym@tekinsoft.com> Acked-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
-
Shaohua Li authored
commit 99aa7846 upstream. flush request is issued in transaction commit code path, so looks using GFP_KERNEL to allocate memory for flush request bio falls into the classic deadlock issue. I saw btrfs and dm get it right, but ext4, xfs and md are using GFP. Signed-off-by:
Shaohua Li <shli@fusionio.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Hugh Dickins authored
commit aca50bd3 upstream. Mel reports a BUG_ON(slot == NULL) in radix_tree_tag_set() on s390 3.0.13: called from __set_page_dirty_nobuffers() when page_remove_rmap() tries to transfer dirty flag from s390 storage key to struct page and radix_tree. That would be because of reclaim's shrink_page_list() calling add_to_swap() on this page at the same time: first PageSwapCache is set (causing page_mapping(page) to appear as &swapper_space), then page->private set, then tree_lock taken, then page inserted into radix_tree - so there's an interval before taking the lock when the radix_tree slot is empty. We could fix this by moving __add_to_swap_cache()'s spin_lock_irq up before the SetPageSwapCache. But a better fix is simply to do what's five years overdue: Ken Chen introduced __set_page_dirty_no_writeback() (if !PageDirty TestSetPageDirty) for tmpfs to skip all the radix_tree overhead, and swap is just the same - it ignores the radix_tree tag, and does not participate in dirty page accounting, so should be using __set_page_dirty_no_writeback() too. s390 testing now confirms that this does indeed fix the problem. Reported-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
-
Lukasz Kucharczyk authored
commit e55a4046 upstream. Signed-off-by:
Lukasz Kucharczyk <lukasz.kucharczyk@tieto.com> Signed-off-by:
-
David Härdeman authored
commit d9b78695 upstream. Setting the correct mode is required by rc-core or scancodes won't be generated (which isn't very user-friendly). This one-line fix should be suitable for 3.4-rc2. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Christian Riesch authored
commit 5b76d060 upstream. Under heavy load (flood ping) it is possible for the MDIO timeout to expire before the loop checks the GO bit again. This patch adds an additional check whether the operation was done before actually returning -ETIMEDOUT. To reproduce this bug, flood ping the device, e.g., ping -f -l 1000 After some time, a "timed out waiting for user access" warning may appear. And even worse, link may go down since the PHY reported a timeout. Signed-off-by:
Christian Riesch <christian.riesch@omicron.at> Cc: Cyril Chemparathy <cyril@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Oliver Neukum authored
commit 5bd7b419 upstream. Fatal errors such as a device disconnect must not trigger error handling. The error returns must be checked. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
commit 9426cd05 upstream. del_timer_sync() cannot be used in interrupt. Replace it with del_timer() and a flag Signed-off-by:
-
Tomoki Sekiyama authored
commit 532f17b5 upstream. Current probing code is setting URB_NO_TRANSFER_DMA_MAP flag into a wrong urb structure, and this causes BUG_ON with some USB host implementations. This patch fixes the issue. Signed-off-by:
Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by:
-
Tomoki Sekiyama authored
commit 523fc5c1 upstream. Removes allocation of coherent buffer for the control-request setup-packet buffer from the yurex driver. Using coherent buffers for setup-packet is obsolete and does not work with some USB host implementations. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 3066616c upstream. A rather annoying and common case is when booting a PVonHVM guest and exposing the PV KBD and PV VFB - as broken toolstacks don't always initialize the backends correctly. Normally The HVM guest is using the VGA driver and the emulated keyboard for this (though upstream version of QEMU implements PV KBD, but still uses a VGA driver). We provide a very basic two-stage wait mechanism - where we wait for 30 seconds for all devices, and then for 270 for all them except the two mentioned. That allows us to wait for the essential devices, like network or disk for the full 6 minutes. To trigger this, put this in your guest config: vfb = [ 'vnc=1, vnclisten=0.0.0.0 ,vncunused=1'] instead of this: vnc=1 vnclisten="0.0.0.0" Acked-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> [v3: Split delay in non-essential (30 seconds) and essential devices per Ian and Stefano suggestion] [v4: Added comments per Stefano suggestion] Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Stefano Stabellini authored
commit e8e937be upstream. Since we are using the m2p_override we do have struct pages corresponding to the user vma mmap'ed by gntdev. Removing the VM_PFNMAP flag makes get_user_pages work on that vma. An example test case would be using a Xen userspace block backend (QDISK) on a file on NFS using O_DIRECT. Signed-off-by:
-
Alexander Shiyan authored
commit 7a6fbc9a upstream. Since 2.6.30-rc1 clps711x serial driver hungs system. This is a result of call disable_irq from ISR. synchronize_irq waits for end of interrupt and goes to infinite loop. This patch fix this problem. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Takashi Iwai authored
commit ca3649de upstream. Some output pins on Conexant chips have no HP control bit, but the auto-parser initializes these pins unconditionally with PIN_HP. Check the pin-capability and avoid the HP bit if not supported. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kent Yoder authored
commit 25c3d30c upstream. The current code only increments the upper 64 bits of the SHA-512 byte counter when the number of bytes hashed happens to hit 2^64 exactly. This patch increments the upper 64 bits whenever the lower 64 bits overflows. Signed-off-by:
Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Zeev Tarantov authored
[Patch not needed upstream as this is a backport build bugfix - gregkh gcc correctly complains: util/hist.c: In function ‘__hists__add_entry’: util/hist.c:240:27: error: invalid type argument of ‘->’ (have ‘struct hist_entry’) util/hist.c:241:23: error: invalid type argument of ‘->’ (have ‘struct hist_entry’) for this new code: + if (he->ms.map != entry->ms.map) { + he->ms.map = entry->ms.map; + if (he->ms.map) + he->ms.map->referenced = true; + } because "entry" is a "struct hist_entry", not a pointer to a struct. In mainline, "entry" is a pointer to struct passed as argument to the function. So this is broken during backporting. But obviously not compile tested. Signed-off-by:Zeev Tarantov <zeev.tarantov@gmail.com> Cc: Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
- 22 Apr, 2012 4 commits
-
-
Greg Kroah-Hartman authored
-
Martin Schwidefsky authored
commit cd94154c upstream. Git commit 36409f63 "use generic RCU page-table freeing code" introduced a tlb flushing bug. Partially revert the above git commit and go back to s390 specific page table flush code. For s390 the TLB can contain three types of entries, "normal" TLB page-table entries, TLB combined region-and-segment-table (CRST) entries and real-space entries. Linux does not use real-space entries which leaves normal TLB entries and CRST entries. The CRST entries are intermediate steps in the page-table translation called translation paths. For example a 4K page access in a three-level page table setup will create two CRST TLB entries and one page-table TLB entry. The advantage of that approach is that a page access next to the previous one can reuse the CRST entries and needs just a single read from memory to create the page-table TLB entry. The disadvantage is that the TLB flushing rules are more complicated, before any page-table may be freed the TLB needs to be flushed. In short: the generic RCU page-table freeing code is incorrect for the CRST entries, in particular the check for mm_users < 2 is troublesome. This is applicable to 3.0+ kernels. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Dave Airlie authored
commit a09d431f upstream. When the force changes went in back in 3.3.0, we ended up returning disconnected in the !force case, and the connected in when forced, as it hit the hardcoded check. Fix it so all exits go via the hardcoded check and stop spurious modesets on platforms with hardcoded EDIDs. Reported-by: Evan McNabb (Red Hat) Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
commit 16a5e32b upstream. My rv515 card is very flaky with msi enabled. Every so often it loses a rearm and never comes back, manually banging the rearm brings it back. Reviewed-by:
-
