Added check for valid device information before dumping debugfs
information.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

OMAP3 does not contain a DMM/Tiler block.  As such, we should not
be exposing any DMM debugfs entries on OMAP3 platforms.

Added inline helper function to verify existence of DMM.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some additional debugfs file to aid in tracking buffer usage.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When flipping, defer unpinning until scanout completes, as indicated
by the appropriate END_WIN irq.

This also re-organizes things a bit, in replacing omap_fb_{pin,unpin}
with omap_fb_replace(), to make it easier to add support for scanout
synchronized DMM refill mode (flipping by just reprogramming DMM
synchronized with DSS scanout).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that 'struct drm_plane' has a pixel_format field, use that.  And
fix a minor typo.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If fbcon calls us from atomic context, push the work off to the
workqueue to avoid calling into the gem/dmm code in an atomic
context.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a workqueue for omapdrm driver, which is needed for at least a
couple things currently: (1) moving omap_gem_roll() to a non-atomic
context, (2) synchronizing page flips w/ DSS scanout related irq's
(in particular not unmapping previous buffer until DSS finishes
scanout).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Get the supported formats for a plane from ovl's supported_modes
bitmask.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tsl2563 probe function has two minor issues with it's error handling paths:
1) it is silent (did not report errors to dmesg)
2) did not return failure code (mixed up use of ret and err)

and two major issues:
3) goto fail2 would corrupt a free memory pool ("double free")
4) device registration failure did NOT cancel/flush delayed work.
   (and thus dereference a freed data structure later)

The "double free" is subtle and was introduced with this change:
    Author: Jonathan Cameron <jic23@cam.ac.uk>
    Date:   Mon Apr 18 12:58:55 2011 +0100
    staging:iio:tsl2563 take advantage of new iio_device_allocate private data.

Originally, chip was allocated seperately. Now it's appended to the
indio_dev by iio_allocate_device(sizeof(*chip)). So we only need one
kfree call as well (in iio_free_device()).

Gory details of tracking this down are here:
   http://crosbug.com/26819

Despite iio_device_registration failing, system can at least now boot.
Will follow up with a fix to "double register : in_intensity_both_raw"
error that is included in the bug report.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Bryan Freed <bfreed@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch 2080913e: "staging: r8712u: Fix regression caused by
commit 8c213fa" from Feb 25, 2012, leads to the following Smatch
complaint:

drivers/staging/rtl8712/usb_intf.c:629 r871xu_dev_remove()
	 warn: variable dereferenced before check 'padapter' (see line 625)

The fix is to move the new statements inside the block where padapter
is not NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the SPARSEMEM from the zsmalloc
Kconfig
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch ensures that the value of ZS_MIN_ALLOC_SIZE, for the
PAGE_SIZE and MAX_PHYSMEM_BITS on the system, allows for all
possible object ids in the lowest storage class to be encoded
in the object handle.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch provides a way to determine or "set a
reasonable value for" MAX_PHYSMEM_BITS in the case that
it is not defined (i.e. !SPARSEMEM)
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves where max_zspage_order is declared and
changes its meaning.  "Order" typically implies 2^order
of something; however, it is currently being used as the
"maximum number of single pages in a zspage".  To add clarity,
ZS_MAX_ZSPAGE_ORDER is now used to calculate ZS_MAX_PAGES_PER_ZSPAGE,
which is 2^ZS_MAX_ZSPAGE_ORDER and is the upper bound on the number
of pages in a zspage.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves the definitions of _PFN_BITS, OBJ_INDEX_BITS
and OBJ_INDEX_MASK from zsmalloc-main.c to zsmalloc_int.h

They will be needed to determine ZS_MIN_ALLOC_SIZE in the next
patch
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache cannot currently be loaded as a module.  However
the Kconfig allows it to be built as a module; something that
the user probably does not intend since the module is not
loadable.

This patch switches zcache from a tristate to a bool in the Kconfig
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e553f182 ("staging: iio: core: Introduce debugfs support, add support
for direct register access") added a '#if defined(CONFIG_DEBUG_FS)' around
iio_read_channel_ext_info and iio_write_channel_ext_info causing the following
compile error if CONFIG_DEBUG_FS is not defined.

	drivers/staging/iio/industrialio-core.c:621:11: error: 'iio_read_channel_ext_info' undeclared (first use in this function)
	drivers/staging/iio/industrialio-core.c:623:11: error: 'iio_write_channel_ext_info' undeclared (first use in this function)

This patch fixes the issue by moving the functions out of the '#if
defined(CONFIG_DEBUG_FS)' section again.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix compiler warning about the type of the module parameter.

Cc: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The lowmemorykiller registers an atomic notifier for notfication of when
the task is freed.  From this atomic notifier callback, it removes the
atomic notifier via task_free_unregister().  This is incorrect because
atomic_notifier_chain_unregister() calls syncronize_rcu(), which can
sleep, which shouldn't be done from an atomic notifier.

Fix this by registering the notifier during init, and only unregister it
if the lowmemorykiller is unloaded.

Rebased to -next by Paul E. McKenney.
Rebased to -next again by Anton Vorontsov.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Christian Bejram <christian.bejram@stericsson.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GCC warns that module_param_named() indirectly returns a bool type value
which is different from 'int' type binder_debug_no_lock declared. Change
it to bool because it is a internal switch for debugging.
Signed-off-by: Zhengwang Ruan <ruan.zhengwang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The kernel already has a debug allocator, no need to have one unique to
a single driver.  So delete it, replace with kfree, kmalloc, and, in a
few places that need it, kzalloc().

Cc: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Memory is being allocated by kmalloc and stored in
variable pstAddIndication.  However, this memory is
not being freed in all cases. Therefore, this patch
frees it on several exit paths. This patch also
removes a whitespace.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It seems the USB device ID 0bda:8192 is wrongly assigned to the
RTL8192SU chip and not to the RTL8191SU chip in the USB database.
So this patch moves this device ID from the rtl8192u staging
driver to the rtl8712 staging driver.

This patch was tested with a Radicom WIFIHU embedded wireless
module with a RTL8191SU chip and the USB device ID 0bda:8192.
Without the patch the rtl8192u driver claims this device, but
it does not work. With the patch the rtl8712 driver services
this device and it works.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove copies of the double USB device IDs:

- 0bda:8172
- 0bda:8174
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No functional changes.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers may not need setup_ops at all, so let the core supply
some empty ops.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Changes since V1:

Exclude iio debugfs code in case CONFIG_DEBUG_FS isn't enabled.
	Introduce helper function iio_get_debugfs_dentry.
	Document additions to struct iio_dev

iio_debugfs_read_reg:
	Use snprintf.
	Use a shorter fixed length.
	Introduce len instead of pointer math.

iio_debugfs_write_reg:
	Fix return value use PT_ERR.

Changes since V2:

Use debugfs_remove.
Fix whitespace damage.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes some comments and some typos that I have found
while reading drivers/staging/iio/*
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

app_id comes from the network and can't be trusted.  If it's zero then
it will lead to a kernel crash.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added TODO file for ozwpan driver.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit c6dc001f "staging: r8712u: Merging Realtek's latest (v2.6.6).
Various fixes", the returned qual.qual member of the iw_statistics
struct was changed. For strong signals, this change made no difference;
however for medium and weak signals it results in a low signal that
shows considerable fluctuation, When using wicd for a medium-strength
AP, the value reported in the status line is reduced from 100% to 60% by
this bug.

This problem is reported in https://bugzilla.kernel.org/show_bug.cgi?id=42826.
Reported-and-tested-by: Robert Crawford <wrc1944@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit 8c213fa "staging: r8712u: Use asynchronous firmware loading",
the command to release the firmware was placed in the wrong routine.

In combination with the bug introduced in commit a5ee6529 "staging: r8712u:
Interface-state not fully tracked", the driver attempts to upload firmware
that had already been released. This bug is the source of one of the
problems in https://bugs.archlinux.org/task/27996#comment89833.
Tested-by: Alberto Lago Ballesteros <saniukeokusainaya@gmail.com>
Tested-by: Adrian <agib@gmx.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit a5ee6529 "staging: r8712u: Interface-state not fully tracked",
the private boolean "bup" was set false when the interface was brought down,
as that seemed appropriate. This change has not caused any problems when
using NetworkManager or manual control of the device; however, when wicd
control is used, there is a locking problem in wpa_supplicant, as shown in
https://bugzilla.kernel.org/show_bug.cgi?id=42818.

This fix reverts the only code change in commit a5ee6529. My
analysis is that "bup" is badly named. In its present form, it
seems to indicate the up/down state of the device, but its usage
is more consistent with an initialized/uninitialized state. That
problem will be addressed in a later patch.

Note: Commit 8c213fa, which introdued asynchronous firmware loading
for this driver, exposed this bug to a greater extent. That bug
is addressed in the next patch in this series.

This bug is also responsible for the bug in
https://bugzilla.kernel.org/show_bug.cgi?id=42815. and this bug is
also part of the problems discussed at https://bugs.archlinux.org/task/27996#comment89950.
Tested-by: Alberto Lago Ballesteros <saniukeokusainaya@gmail.com>
Tested-by: Adrian <agib@gmx.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.2+]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit 1ca1a92c "Staging: wlan-ng: memsetting the wrong amount of
data" I changed the code so we didn't memset() past the end of the
msg1.bssid.data[] array.  Walter Harms noticed that it was weird that
we were setting the len to 6 when there were 7 elements in the array.
Pavel Roskin pointed out that the intent of the code was actually to
memset() msg1.bssid.data.data[] which is a 6 character array.
Reported-by: Walter Harms <wharms@bfs.de>
Reported-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The header bc_dts_types is not used, so we can remove it.
Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces the local includes with the global header.
So the the crystalhd.h will be the only header included by the other files.
Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the crystalhd_cmds.h there was a struct dependence bug:
the struct crystalhd_adp (which  is declared on crystalhd_lnx.h)
is used on  the crystalhd_cmd struct, however the crystalhd_lnx.h is
never included on crystalhd_cmds.h at all. Including the
crystalhd_lnx.h on crystalhd_cmds.h breaks the build,
many dependencies error occurrs, most of the type
"error: 'struct bar' has no member named 'foo'",
so I decided to reorganize the headers by adding a global header.

The gobal header crystalhd.h includes all the local headers.
The idea is that the crystalhd header will be the only included
by the others files, this will avoid the mess of many #include levels.

The order of the headers included by crystalhd.h considers the
dependencies among the headers.
Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed some coding style issues.
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes a superfluous loop in asus_oled.c
The code is equivalent to do{...} while (0) and thus executes the code
exactly once -> so we can simply remove the loop.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>