Add rethook powerpc64 implementation. Most of the code has been copied from
kretprobes on powerpc64.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735288495.1084943.539630613772422267.stgit@devnote2

Add rethook arm64 implementation. Most of the code has been copied from
kretprobes on arm64.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735287344.1084943.9787335632585653418.stgit@devnote2

Add rethook for x86 implementation. Most of the code has been copied from
kretprobes on x86.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735286243.1084943.7477055110527046644.stgit@devnote2

Add a return hook framework which hooks the function return. Most of the
logic came from the kretprobe, but this is independent from kretprobe.

Note that this is expected to be used with other function entry hooking
feature, like ftrace, fprobe, adn kprobes. Eventually this will replace
the kretprobe (e.g. kprobe + rethook = kretprobe), but at this moment,
this is just an additional hook.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735285066.1084943.9259661137330166643.stgit@devnote2

The fprobe is a wrapper API for ftrace function tracer.
Unlike kprobes, this probes only supports the function entry, but this
can probe multiple functions by one fprobe. The usage is similar, user
will set their callback to fprobe::entry_handler and call
register_fprobe*() with probed functions.
There are 3 registration interfaces,

 - register_fprobe() takes filtering patterns of the functin names.
 - register_fprobe_ips() takes an array of ftrace-location addresses.
 - register_fprobe_syms() takes an array of function names.

The registered fprobes can be unregistered with unregister_fprobe().
e.g.

struct fprobe fp = { .entry_handler = user_handler };
const char *targets[] = { "func1", "func2", "func3"};
...

ret = register_fprobe_syms(&fp, targets, ARRAY_SIZE(targets));

...

unregister_fprobe(&fp);
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735283857.1084943.1154436951479395551.stgit@devnote2

Adding ftrace_set_filter_ips function to be able to set filter on
multiple ip addresses at once.

With the kprobe multi attach interface we have cases where we need to
initialize ftrace_ops object with thousands of functions, so having
single function diving into ftrace_hash_move_and_update_ops with
ftrace_lock is faster.

The functions ips are passed as unsigned long array with count.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735282673.1084943.18310504594134769804.stgit@devnote2

In namespace at_ns0, the IP address of tnl dev is 10.1.1.100 which is the
overlay IP, and the ip address of veth0 is 172.16.1.100 which is the vtep
IP. When doing 'ping 10.1.1.100' from root namespace, the remote_ip should
be 172.16.1.100.

Fixes: 933a741e ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220313164116.5889-1-fankaixi.li@bytedance.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Allow increasing the MTU over page boundaries on veth devices
if the attached xdp program declares to support xdp fragments.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/d5dc039c3d4123426e7023a488c449181a7bc57f.1646989407.git.lorenzo@kernel.org

Introduce veth_convert_skb_to_xdp_buff routine in order to
convert a non-linear skb into a xdp buffer. If the received skb
is cloned or shared, veth_convert_skb_to_xdp_buff will copy it
in a new skb composed by order-0 pages for the linear and the
fragmented area. Moreover veth_convert_skb_to_xdp_buff guarantees
we have enough headroom for xdp.
This is a preliminary patch to allow attaching xdp programs with frags
support on veth devices.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/8d228b106bc1903571afd1d77e797bffe9a5ea7c.1646989407.git.lorenzo@kernel.org

Even if this is a theoretical issue since it is not possible to perform
XDP_REDIRECT on a non-linear xdp_frame, veth driver does not account
paged area in ndo_xdp_xmit function pointer.
Introduce xdp_get_frame_len utility routine to get the xdp_frame full
length and account total frame size running XDP_REDIRECT of a
non-linear xdp frame into a veth device.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/54f9fd3bb65d190daf2c0bbae2f852ff16cfbaa0.1646989407.git.lorenzo@kernel.org

When bpf_jit_harden is toggled between 0 and 2, subprog jit may fail
due to inconsistent twice read values of bpf_jit_harden during jit. So
add a test to ensure the problem is fixed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220309123321.2400262-5-houtao1@huawei.com

It is the bpf_jit_harden counterpart to commit 60b58afc ("bpf: fix
net.core.bpf_jit_enable race"). bpf_jit_harden will be tested twice
for each subprog if there are subprogs in bpf program and constant
blinding may increase the length of program, so when running
"./test_progs -t subprogs" and toggling bpf_jit_harden between 0 and 2,
jit_subprogs may fail because constant blinding increases the length
of subprog instructions during extra passs.

So cache the value of bpf_jit_blinding_enabled() during program
allocation, and use the cached value during constant blinding, subprog
JITing and args tracking of tail call.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220309123321.2400262-4-houtao1@huawei.com

Extra pass for subprog jit may fail (e.g. due to bpf_jit_harden race),
but bpf_func is not cleared for the subprog and jit_subprogs will
succeed. The running of the bpf program may lead to oops because the
memory for the jited subprog image has already been freed.

So fall back to interpreter mode by clearing bpf_func/jited/jited_len
when extra pass fails.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220309123321.2400262-2-houtao1@huawei.com

Martin KaFai Lau says:

====================

After upgrading to the newer libcap (>= 2.60),
the libcap commit aca076443591 ("Make cap_t operations thread safe.")
added a "__u8 mutex;" to the "struct _cap_struct".  It caused a few byte
shift that breaks the assumption made in the "struct libcap" definition
in test_verifier.c.

This set is to remove the libcap dependency from the bpf selftests.

v2:
- Define CAP_PERFMON and CAP_BPF when the older <linux/capability.h>
  does not have them. (Andrii)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch removes the libcap usage from test_progs.
bind_perm.c is the only user.  cap_*_effective() helpers added in the
earlier patch are directly used instead.

No other selftest binary is using libcap, so '-lcap' is also removed
from the Makefile.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220316173835.2039334-1-kafai@fb.com

This patch removes the libcap usage from test_verifier.
The cap_*_effective() helpers added in the earlier patch are
used instead.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220316173829.2038682-1-kafai@fb.com

After upgrading to the newer libcap (>= 2.60),
the libcap commit aca076443591 ("Make cap_t operations thread safe.")
added a "__u8 mutex;" to the "struct _cap_struct".  It caused a few byte
shift that breaks the assumption made in the "struct libcap" definition
in test_verifier.c.

The bpf selftest usage only needs to enable and disable the effective
caps of the running task.  It is easier to directly syscall the
capget and capset instead.  It can also remove the libcap
library dependency.

The cap_helpers.{c,h} is added.  One __u64 is used for all CAP_*
bits instead of two __u32.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220316173823.2036955-1-kafai@fb.com

The top-level (bpftool.8) man page was missing docs for a few
subcommands and their respective sub-sub-commands.

This commit brings the top level man page up to date. Note that I've
kept the ordering of the subcommands the same as in `bpftool help`.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/3049ef5dc509c0d1832f0a8b2dba2ccaad0af688.1647213551.git.dxu@dxuuu.xyz

Commit 82e6b1ee ("bpf: Allow to specify user-provided bpf_cookie for
BPF perf links") introduced the concept of user specified bpf_cookie,
which could be accessed by BPF programs using bpf_get_attach_cookie().
For troubleshooting purposes it is convenient to expose bpf_cookie via
bpftool as well, so there is no need to meddle with the target BPF
program itself.

Implemented using the pid iterator BPF program to actually fetch
bpf_cookies, which allows constraining code changes only to bpftool.

$ bpftool link
1: type 7  prog 5
        bpf_cookie 123
        pids bootstrap(81)
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220309163112.24141-1-9erthalion6@gmail.com

Clean up the array_size.cocci warnings under tools/testing/selftests/bpf/:

Use `ARRAY_SIZE(arr)` instead of forms like `sizeof(arr)/sizeof(arr[0])`.

tools/testing/selftests/bpf/test_cgroup_storage.c uses ARRAY_SIZE() defined
in tools/include/linux/kernel.h (sys/sysinfo.h -> linux/kernel.h), while
others use ARRAY_SIZE() in bpf_util.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220315130143.2403-1-guozhengkui@vivo.com

When running xdpsock for a fix duration of time before terminating
using --duration=<n>, there is a race condition that may cause xdpsock
to terminate immediately.

When running for a fixed duration of time the check to determine when to
terminate execution is in is_benchmark_done() and is being executed in
the context of the poller thread,

    if (opt_duration > 0) {
            unsigned long dt = (get_nsecs() - start_time);

            if (dt >= opt_duration)
                    benchmark_done = true;
    }

However start_time is only set after the poller thread have been
created. This leaves a small window when the poller thread is starting
and calls is_benchmark_done() for the first time that start_time is not
yet set. In that case start_time have its initial value of 0 and the
duration check fails as it do not correlate correctly for the
applications start time and immediately sets benchmark_done which in
turn terminates the xdpsock application.

Fix this by setting start_time before creating the poller thread.

Fixes: d3f11b01 ("samples/bpf: xdpsock: Add duration option to specify how long to run")
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220315102948.466436-1-niklas.soderlund@corigine.com

If tcp_bpf_sendmsg is running during a tear down operation, psock may be
freed.

tcp_bpf_sendmsg()
 tcp_bpf_send_verdict()
  sk_msg_return()
  tcp_bpf_sendmsg_redir()
   unlikely(!psock))
     sk_msg_free()

The mem of msg has been uncharged in tcp_bpf_send_verdict() by
sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock
is null, we can simply returning an error code, this would then trigger
the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have
the side effect of throwing an error up to user space. This would be a
slight change in behavior from user side but would look the same as an
error if the redirect on the socket threw an error.

This issue can cause the following info:
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220304081145.2037182-5-wangyufen@huawei.com

In tcp_bpf_send_verdict(), if msg has more data after
tcp_bpf_sendmsg_redir():

tcp_bpf_send_verdict()
 tosend = msg->sg.size  //msg->sg.size = 22220
 case __SK_REDIRECT:
  sk_msg_return()  //uncharged msg->sg.size(22220) sk->sk_forward_alloc
  tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
 goto more_data;
 tosend = msg->sg.size  //msg->sg.size = 11000
 case __SK_REDIRECT:
  sk_msg_return()  //uncharged msg->sg.size(11000) to sk->sk_forward_alloc

The msg->sg.size(11000) has been uncharged twice, to fix we can charge the
remaining msg->sg.size before goto more data.

This issue can cause the following info:
WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x55/0x110
 __tcp_close+0x279/0x470
 tcp_close+0x1f/0x60
 inet_release+0x3f/0x80
 __sock_release+0x3d/0xb0
 sock_close+0x11/0x20
 __fput+0x92/0x250
 task_work_run+0x6a/0xa0
 do_exit+0x33b/0xb60
 do_group_exit+0x2f/0xa0
 get_signal+0xb6/0x950
 arch_do_signal_or_restart+0xac/0x2a0
 ? vfs_write+0x237/0x290
 exit_to_user_mode_prepare+0xa9/0x200
 syscall_exit_to_user_mode+0x12/0x30
 do_syscall_64+0x46/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
 </TASK>

WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220304081145.2037182-4-wangyufen@huawei.com

If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc()
returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial
memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is
greater than osize after sk_msg_alloc(), memleak occurs. To fix we use
sk_msg_trim() to release the allocated memory, then goto wait for memory.

Other call paths of sk_msg_alloc() have the similar issue, such as
tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(),
as Cong Wang suggested.

This issue can cause the following info:
WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x55/0x110
 __tcp_close+0x279/0x470
 tcp_close+0x1f/0x60
 inet_release+0x3f/0x80
 __sock_release+0x3d/0xb0
 sock_close+0x11/0x20
 __fput+0x92/0x250
 task_work_run+0x6a/0xa0
 do_exit+0x33b/0xb60
 do_group_exit+0x2f/0xa0
 get_signal+0xb6/0x950
 arch_do_signal_or_restart+0xac/0x2a0
 exit_to_user_mode_prepare+0xa9/0x200
 syscall_exit_to_user_mode+0x12/0x30
 do_syscall_64+0x46/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
 </TASK>

WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 kthread+0xe6/0x110
 ret_from_fork+0x22/0x30
 </TASK>

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220304081145.2037182-3-wangyufen@huawei.com

If tcp_bpf_sendmsg is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.

 sk1 (redirect sk2)                         sk2
 -------------------                      ---------------
tcp_bpf_sendmsg()
 tcp_bpf_send_verdict()
  tcp_bpf_sendmsg_redir()
   bpf_tcp_ingress()
                                          sock_map_close()
                                           lock_sock()
    lock_sock() ... blocking
                                           sk_psock_stop
                                            sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED);
                                           release_sock(sk);
    lock_sock()
    sk_mem_charge()
    get_page()
    sk_psock_queue_msg()
     sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED);
      drop_sk_msg()
    release_sock()

While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge
and has sg pages need to put. To fix we use sk_msg_free() and then kfee()
msg.

This issue can cause the following info:
WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0
Call Trace:
 <IRQ>
 inet_csk_destroy_sock+0x55/0x110
 tcp_rcv_state_process+0xe5f/0xe90
 ? sk_filter_trim_cap+0x10d/0x230
 ? tcp_v4_do_rcv+0x161/0x250
 tcp_v4_do_rcv+0x161/0x250
 tcp_v4_rcv+0xc3a/0xce0
 ip_protocol_deliver_rcu+0x3d/0x230
 ip_local_deliver_finish+0x54/0x60
 ip_local_deliver+0xfd/0x110
 ? ip_protocol_deliver_rcu+0x230/0x230
 ip_rcv+0xd6/0x100
 ? ip_local_deliver+0x110/0x110
 __netif_receive_skb_one_core+0x85/0xa0
 process_backlog+0xa4/0x160
 __napi_poll+0x29/0x1b0
 net_rx_action+0x287/0x300
 __do_softirq+0xff/0x2fc
 do_softirq+0x79/0x90
 </IRQ>

WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 ? process_one_work+0x3c0/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>

Fixes: 9635720b ("bpf, sockmap: Fix memleak on ingress msg enqueue")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220304081145.2037182-2-wangyufen@huawei.com

Building selftests/bpf with latest clang compiler (clang15 built
from source), I hit the following compilation error:

  /.../prog_tests/send_signal.c:43:16: error: variable 'j' set but not used [-Werror,-Wunused-but-set-variable]
                  volatile int j = 0;
                               ^
  1 error generated.

The problem also exists with clang13 and clang14. clang12 is okay.

In send_signal.c, we have the following code ...

  volatile int j = 0;
  [...]
  for (int i = 0; i < 100000000 && !sigusr1_received; i++)
    j /= i + 1;

... to burn CPU cycles so bpf_send_signal() helper can be tested
in NMI mode.

Slightly changing 'j /= i + 1' to 'j /= i + j + 1' or 'j++' can
fix the problem. Further investigation indicated this should be
a clang bug ([1]). The upstream fix will be proposed later. But it
is a good idea to workaround the issue to unblock people who build
kernel/selftests with clang.

  [1] https://discourse.llvm.org/t/strange-clang-unused-but-set-variable-error-with-volatile-variables/60841Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220311003721.2177170-1-yhs@fb.com

This adds an extra test to the xdp_do_redirect selftest for XDP live packet
mode, which verifies that the maximum permissible packet size is accepted
without any errors, and that a too big packet is correctly rejected.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220310225621.53374-2-toke@redhat.com

The live packet mode uses some extra space at the start of each page to
cache data structures so they don't have to be rebuilt at every repetition.
This space wasn't correctly accounted for in the size checking of the
arguments supplied to userspace. In addition, the definition of the frame
size should include the size of the skb_shared_info (as there is other
logic that subtracts the size of this).

Together, these mistakes resulted in userspace being able to trip the
XDP_WARN() in xdp_update_frame_from_buff(), which syzbot discovered in
short order. Fix this by changing the frame size define and adding the
extra headroom to the bpf_prog_test_run_xdp() function. Also drop the
max_len parameter to the page_pool init, since this is related to DMA which
is not used for the page pool instance in PROG_TEST_RUN.

Fixes: b530e9e1 ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: syzbot+0e91362d99386dc5de99@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220310225621.53374-1-toke@redhat.com

Previous patches have introduced the compiler attribute btf_type_tag for
__user and __percpu. The availability of this attribute depends on
some CONFIGs and compiler support. This patch refactors the use
of btf_type_tag by introducing BTF_TYPE_TAG, which hides all the
dependencies.

No functional change.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220310211655.3173786-1-haoluo@google.com

Roberto Sassu says:

====================
Extend the interoperability with IMA, to give wider flexibility for the
implementation of integrity-focused LSMs based on eBPF.

Patch 1 fixes some style issues.

Patches 2-6 give the ability to eBPF-based LSMs to take advantage of the
measurement capability of IMA without needing to setup a policy in IMA
(those LSMs might implement the policy capability themselves).

Patches 7-9 allow eBPF-based LSMs to evaluate files read by the kernel.

Changelog

v2:
- Add better description to patch 1 (suggested by Shuah)
- Recalculate digest if it is not fresh (when IMA_COLLECTED flag not set)
- Move declaration of bpf_ima_file_hash() at the end (suggested by
  Yonghong)
- Add tests to check if the digest has been recalculated
- Add deny test for bpf_kernel_read_file()
- Add description to tests

v1:
- Modify ima_file_hash() only and allow the usage of the function with the
  modified behavior by eBPF-based LSMs through the new function
  bpf_ima_file_hash() (suggested by Mimi)
- Make bpf_lsm_kernel_read_file() sleepable so that bpf_ima_inode_hash()
  and bpf_ima_file_hash() can be called inside the implementation of
  eBPF-based LSMs for this hook
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Check that bpf_kernel_read_file() denies the reading of an IMA policy, by
ensuring that ima_setup.sh exits with an error.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-10-roberto.sassu@huawei.com

Test the ability of bpf_lsm_kernel_read_file() to call the sleepable
functions bpf_ima_inode_hash() or bpf_ima_file_hash() to obtain a
measurement of a loaded IMA policy.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-9-roberto.sassu@huawei.com

Make bpf_lsm_kernel_read_file() as sleepable, so that bpf_ima_inode_hash()
or bpf_ima_file_hash() can be called inside the implementation of this
hook.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-8-roberto.sassu@huawei.com

Verify that bpf_ima_inode_hash() returns a non-fresh digest after a file
write, and that bpf_ima_file_hash() returns a fresh digest. Verification is
done by requesting the digest from the bprm_creds_for_exec hook, called
before ima_bprm_check().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-7-roberto.sassu@huawei.com

Add new test to ensure that bpf_ima_file_hash() returns the digest of the
executed files.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-6-roberto.sassu@huawei.com

Move sample generator code to ima_test_common() so that the new function
can be called by multiple LSM hooks.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-5-roberto.sassu@huawei.com

ima_file_hash() has been modified to calculate the measurement of a file on
demand, if it has not been already performed by IMA or the measurement is
not fresh. For compatibility reasons, ima_inode_hash() remains unchanged.

Keep the same approach in eBPF and introduce the new helper
bpf_ima_file_hash() to take advantage of the modified behavior of
ima_file_hash().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-4-roberto.sassu@huawei.com

__ima_inode_hash() checks if a digest has been already calculated by
looking for the integrity_iint_cache structure associated to the passed
inode.

Users of ima_file_hash() (e.g. eBPF) might be interested in obtaining the
information without having to setup an IMA policy so that the digest is
always available at the time they call this function.

In addition, they likely expect the digest to be fresh, e.g. recalculated
by IMA after a file write. Although getting the digest from the
bprm_committed_creds hook (as in the eBPF test) ensures that the digest is
fresh, as the IMA hook is executed before that hook, this is not always the
case (e.g. for the mmap_file hook).

Call ima_collect_measurement() in __ima_inode_hash(), if the file
descriptor is available (passed by ima_file_hash()) and the digest is not
available/not fresh, and store the file measurement in a temporary
integrity_iint_cache structure.

This change does not cause memory usage increase, due to using the
temporary integrity_iint_cache structure, and due to freeing the
ima_digest_data structure inside integrity_iint_cache before exiting from
__ima_inode_hash().

For compatibility reasons, the behavior of ima_inode_hash() remains
unchanged.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-3-roberto.sassu@huawei.com

Fix the following warnings in ima_main.c, displayed with W=n make argument:

security/integrity/ima/ima_main.c:432: warning: Function parameter or
                          member 'vma' not described in 'ima_file_mprotect'
security/integrity/ima/ima_main.c:636: warning: Function parameter or
                  member 'inode' not described in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:636: warning: Excess function parameter
                            'file' description in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:843: warning: Function parameter or
                     member 'load_id' not described in 'ima_post_load_data'
security/integrity/ima/ima_main.c:843: warning: Excess function parameter
                                   'id' description in 'ima_post_load_data'

Also, fix some style issues in the description of ima_post_create_tmpfile()
and ima_post_path_mknod().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-2-roberto.sassu@huawei.com

If a BPF map is created over 2^32 the memlock value as displayed in JSON
format will be incorrect. Use atoll instead of atoi so that the correct
number is displayed.

  ```
  $ bpftool map create /sys/fs/bpf/test_bpfmap type hash key 4 \
    value 1024 entries 4194304 name test_bpfmap
  $ bpftool map list
  1: hash  name test_bpfmap  flags 0x0
          key 4B  value 1024B  max_entries 4194304  memlock 4328521728B
  $ sudo bpftool map list -j | jq .[].bytes_memlock
  33554432
  ```
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/b6601087-0b11-33cc-904a-1133d1500a10@cloudflare.com