- 02 May, 2013 10 commits
-
-
Jayamohan Kallickal authored
This patch sends uninitialize pattern to FW during driver unload which is expected by FW for cleanup Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Dan Carpenter authored
We need to store PROTO_ERR_IMPL_LOGO (26) things here, but the first element isn't used so the array should have 27 elements. This matches fwevt_to_rnevt[] which has 27 elements. The patch solves a Smatch static checker warning on my system: drivers/scsi/csiostor/csio_rnode.c:880 csio_rnode_fwevt_handler() error: buffer overflow '(rn)->stats.n_evt_fw' 26 <= 26 Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by:
-
Bhanu Prakash Gollapudi authored
Signed-off-by:
Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by:
-
Bhanu Prakash Gollapudi authored
Signed-off-by:
-
Bhanu Prakash Gollapudi authored
When IO is successfully completed while an abort is pending, eh_abort incorrectly assumes that abort failed and performes recovery by issuing cleanup. Howerver, cleanup timesout as the firmware has no clue about this IO. Fix this by checking if the IO has already completed. Signed-off-by:
-
Bhanu Prakash Gollapudi authored
[jejb: move PCI_DEVICE_ID definitions to include/pci_ids.h] Signed-off-by:
-
Bhanu Prakash Gollapudi authored
Set perf_config to 3 during firmware initialization to enable both cached connections as well as cached tasks. Signed-off-by:
-
Hiral Patel authored
Signed-off-by:
Brian Uchino <buchino@cisco.com> Signed-off-by:
Hiral Patel <hiralpat@cisco.com> Signed-off-by:
-
Hiral Patel authored
If switch configured in FIP and adapter configured in non-fip mode, driver panics while queueing FIP frame in non-existing fip_frame_queue. Added config check before queueing FIP frame in misconfiguration case to avoid kernel panic. Signed-off-by:
-
Hiral Patel authored
FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP protocols as well as by the FCoE encapsulation for Fibre Channel payloads on the established virtual link. One of the goals of FC-BB-5 was to be as nonintrusive as possible on initiators and targets, and therefore FIP VLAN discovery occurs in the native VLAN used by the initiator or target to exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP protocol running on the native VLAN; all other FIP protocols run on the discovered FCoE VLANs. If an administrator has manually configured FCoE VLANs on ENodes and FCFs, there is no need to use this protocol. FIP and FCoE will run over the configured VLANs. An ENode without FCoE VLANs configuration would use this automated discovery protocol to discover over which VLANs FCoE is running. The ENode sends a FIP VLAN discovery request to a multicast MAC address called All-FCF-MACs, which is a multicast MAC address to which all FCFs listen. All FCFs that can be reached in the native VLAN of the ENode are expected to respond on the same VLAN with a response that lists one or more FCoE VLANs that are available for the ENode's VN_Port login. This protocol has the sole purpose of allowing the ENode to discover all the available FCoE VLANs. Now the ENode may enable a subset of these VLANs for FCoE Running the FIP protocol in these VLANs on a per VLAN basis. And FCoE data transactions also would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP and FCoE traffic runs on the selected FCoE VLAN. Its only the FIP VLAN Discovery protocol that is permitted to run on the Default native VLAN of the system. [**** NOTE ****] We are working on moving this feature definitions and functionality to libfcoe module. We need this patch to be approved, as Suse is looking forward to merge this feature in SLES 11 SP3 release. Once this patch is approved, we will submit patch which should move vlan discovery feature to libfoce. [Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal] Signed-off-by:
Anantha Prakash T <atungara@cisco.com> Signed-off-by:
-
- 01 May, 2013 30 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ... -
Xi Wang authored
This patch fixes the following build error. In file included from include/linux/filter.h:52:0, from arch/arm/net/bpf_jit_32.c:14: include/linux/printk.h:54:2: error: unknown type name ‘va_list’ include/linux/printk.h:105:21: error: unknown type name ‘va_list’ include/linux/printk.h:108:30: error: unknown type name ‘va_list’ Signed-off-by:Xi Wang <xi.wang@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "Assorted fixes and cleanups to the existing drivers plus a new driver for IMS Passenger Control Unit device they use for ther in-flight entertainment system." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: trackpoint - Optimize trackpoint init to use power-on reset Input: apbps2 - convert to devm_ioremap_resource() Input: ALPS - use %ph to print buffers ARM - shmobile: Armadillo800EVA: Move st1232 reset pin handling Input: st1232 - add reset pin handling Input: st1232 - convert to devm_* infrastructure Input: MT - handle semi-mt devices in core Input: adxl34x - use spi_get_drvdata() Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata() Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata() Input: ims-pcu - fix a memory leak on error Input: sysrq - supplement reset sequence with timeout functionality Input: tegra-kbc - support for defining row/columns based on SoC Input: imx_keypad - switch to using managed resources Input: arc_ps2 - add support for device tree Input: mma8450 - fix signed 12bits to 32bits conversion Input: eeti_ts - remove redundant null check Input: edt-ft5x06 - remove redundant null check before kfree Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functions Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functions ...
-
Eric Dumazet authored
Using bit fields is dangerous on ppc64/sparc64, as the compiler [1] uses 64bit instructions to manipulate them. If the 64bit word includes any atomic_t or spinlock_t, we can lose critical concurrent changes. This is happening in af_unix, where unix_sk(sk)->gc_candidate/ gc_maybe_cycle/lock share the same 64bit word. This leads to fatal deadlock, as one/several cpus spin forever on a spinlock that will never be available again. A safer way would be to use a long to store flags. This way we are sure compiler/arch wont do bad things. As we own unix_gc_lock spinlock when clearing or setting bits, we can use the non atomic __set_bit()/__clear_bit(). recursion_level can share the same 64bit location with the spinlock, as it is set only with this spinlock held. [1] bug fixed in gcc-4.8.0 : http://gcc.gnu.org/bugzilla/show_bug.cgi?id=52080Reported-by:
Ambrose Feinstein <ambrose@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== This fixes 2 small bugs - one which may cause an unnecessary link flap, and the other is a small memory leak when unloading while cnic is not loaded. ==================== Signed-off-by: -
Yuval Mintz authored
bnx2x driver allocates searcher T2 tables, but it releases that memory during unload only released if the cnic is loaded. Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
When the bnx2x driver reads the port configuration - mask irrelevant bits. Without this change, the unintended bits may cause the driver to needlessly toggle the link, as a comparison in the link flap avoidance flow will show that the old link did not advertise the same capabilities and thus cannot be retained. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
-
Daniel Borkmann authored
Let GCC check for format string errors in sctp's probe printl function. This patch fixes the warning when compiled with W=1: net/sctp/probe.c:73:2: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
Currently, in menuconfig, Netlink's new mmaped IO is the very first entry under the ``Networking support'' item and comes even before ``Networking options'': [ ] Netlink: mmaped IO Networking options ---> ... Lets move this into ``Networking options'' under netlink's Kconfig, since this might be more appropriate. Introduced by commit ccdfcc39 (``netlink: mmaped netlink: ring setup''). Signed-off-by:
-
Neil Horman authored
Bart Van Assche recently reported a warning to me: <IRQ> [<ffffffff8103d79f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8103d7fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff814761dd>] mutex_trylock+0x16d/0x180 [<ffffffff813968c9>] netpoll_poll_dev+0x49/0xc30 [<ffffffff8136a2d2>] ? __alloc_skb+0x82/0x2a0 [<ffffffff81397715>] netpoll_send_skb_on_dev+0x265/0x410 [<ffffffff81397c5a>] netpoll_send_udp+0x28a/0x3a0 [<ffffffffa0541843>] ? write_msg+0x53/0x110 [netconsole] [<ffffffffa05418bf>] write_msg+0xcf/0x110 [netconsole] [<ffffffff8103eba1>] call_console_drivers.constprop.17+0xa1/0x1c0 [<ffffffff8103fb76>] console_unlock+0x2d6/0x450 [<ffffffff8104011e>] vprintk_emit+0x1ee/0x510 [<ffffffff8146f9f6>] printk+0x4d/0x4f [<ffffffffa0004f1d>] scsi_print_command+0x7d/0xe0 [scsi_mod] This resulted from my commit ca99ca14 which introduced a mutex_trylock operation in a path that could execute in interrupt context. When mutex debugging is enabled, the above warns the user when we are in fact exectuting in interrupt context interrupt context. After some discussion, It seems that a semaphore is the proper mechanism to use here. While mutexes are defined to be unusable in interrupt context, no such condition exists for semaphores (save for the fact that the non blocking api calls, like up and down_trylock must be used when in irq context). Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Bart Van Assche <bvanassche@acm.org> CC: Bart Van Assche <bvanassche@acm.org> CC: David Miller <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by:
-
Pravin B Shelar authored
Commit f9c22888 (netlink: implement memory mapped recvmsg) increamented skb->users ref count twice for a dump op which does not look right. Following patch fixes that. CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull tile arch changes from Chris Metcalf: "These are some minor new feature work and other changes that didn't merit getting pushed up after the 3.9 merge window closed. There should be a lot more activity in the 3.11 merge window" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: Fix syscall return value passed to tracepoint tile: comment assumption about __insn_mtspr for <asm/irqflags.h> tile: ns2cycles should use __raw_get_cpu_var arch: remove KCORE_ELF again [tile] tile: remove two outdated Kconfig entries tile: support atomic64_dec_if_positive() tile: support TIF_SYSCALL_TRACEPOINT; select HAVE_SYSCALL_TRACEPOINTS tile: Add definition of NR_syscalls tile: move declaration of sys_call_table to <asm/syscall.h> arch/tile: Enable HAVE_ARCH_TRACEHOOK arch/tile: Call tracehook_report_syscall_{entry,exit} in syscall trace
-
Steven Rostedt authored
Commit f91eb62f ("init: scream bloody murder if interrupts are enabled too early") added three new warnings. The first two seemed reasonable, but the third included a warning when an initcall returned non-zero. Although, the third WARN() does include an imbalanced preempt disabled, or irqs disable, it shouldn't warn if it only had an initcall that just returns non-zero. In fact, according to Linus, it shouldn't print at all. As it only prints with initcall_debug set, and that already shows enough information to fix things. Link: http://lkml.kernel.org/r/CA+55aFzaBC5SFi7=F2mfm+KWY5qTsBmOqgbbs8E+LUS8JK-sBg@mail.gmail.comSuggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Jamal Hadi Salim authored
Deal with changes in newer xtables while maintaining backward compatibility. Thanks to Jan Engelhardt for suggestions. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull omap3isp clk support from Mauro Carvalho Chehab: "This patch were sent in separate as it depends on a merge from clock framework, that you merged in commit 362ed48d" * 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] omap3isp: Use the common clock framework
-
Dmitry Torokhov authored
Prepare first set of updates for 3.10 merge window.
-
Linus Torvalds authored
Merge IPC cleanup and scalability patches from Andrew Morton. This cleans up many of the oddities in the IPC code, uses the list iterator helpers, splits out locking and adds per-semaphore locks for greater scalability of the IPC semaphore code. Most normal user-level locking by now uses futexes (ie pthreads, but also a lot of specialized locks), but SysV IPC semaphores are apparently still used in some big applications, either for portability reasons, or because they offer tracking and undo (and you don't need to have a special shared memory area for them). Our IPC semaphore scalability was pitiful. We used to lock much too big ranges, and we used to have a single ipc lock per ipc semaphore array. Most loads never cared, but some do. There are some numbers in the individual commits. * ipc-scalability: ipc: sysv shared memory limited to 8TiB ipc/msg.c: use list_for_each_entry_[safe] for list traversing ipc,sem: fine grained locking for semtimedop ipc,sem: have only one list in struct sem_queue ipc,sem: open code and rename sem_lock ipc,sem: do not hold ipc lock more than necessary ipc: introduce lockless pre_down ipcctl ipc: introduce obtaining a lockless ipc object ipc: remove bogus lock comment for ipc_checkid ipc/msgutil.c: use linux/uaccess.h ipc: refactor msg list search into separate function ipc: simplify msg list search ipc: implement MSG_COPY as a new receive mode ipc: remove msg handling from queue scan ipc: set EFAULT as default error in load_msg() ipc: tighten msg copy loops ipc: separate msg allocation from userspace copy ipc: clamp with min()
-
Robin Holt authored
Trying to run an application which was trying to put data into half of memory using shmget(), we found that having a shmall value below 8EiB-8TiB would prevent us from using anything more than 8TiB. By setting kernel.shmall greater than 8EiB-8TiB would make the job work. In the newseg() function, ns->shm_tot which, at 8TiB is INT_MAX. ipc/shm.c: 458 static int newseg(struct ipc_namespace *ns, struct ipc_params *params) 459 { ... 465 int numpages = (size + PAGE_SIZE -1) >> PAGE_SHIFT; ... 474 if (ns->shm_tot + numpages > ns->shm_ctlall) 475 return -ENOSPC; [akpm@linux-foundation.org: make ipc/shm.c:newseg()'s numpages size_t, not int] Signed-off-by:Robin Holt <holt@sgi.com> Reported-by:
Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Nikola Pajkovsky authored
The ipc/msg.c code does its list operations by hand and it open-codes the accesses, instead of using for_each_entry_[safe]. Signed-off-by:
Nikola Pajkovsky <npajkovs@redhat.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Rik van Riel authored
Introduce finer grained locking for semtimedop, to handle the common case of a program wanting to manipulate one semaphore from an array with multiple semaphores. If the call is a semop manipulating just one semaphore in an array with multiple semaphores, only take the lock for that semaphore itself. If the call needs to manipulate multiple semaphores, or another caller is in a transaction that manipulates multiple semaphores, the sem_array lock is taken, as well as all the locks for the individual semaphores. On a 24 CPU system, performance numbers with the semop-multi test with N threads and N semaphores, look like this: vanilla Davidlohr's Davidlohr's + Davidlohr's + threads patches rwlock patches v3 patches 10 610652 726325 1783589 2142206 20 341570 365699 1520453 1977878 30 288102 307037 1498167 2037995 40 290714 305955 1612665 2256484 50 288620 312890 1733453 2650292 60 289987 306043 1649360 2388008 70 291298 306347 1723167 2717486 80 290948 305662 1729545 2763582 90 290996 306680 1736021 2757524 100 292243 306700 1773700 3059159 [davidlohr.bueso@hp.com: do not call sem_lock when bogus sma] [davidlohr.bueso@hp.com: make refcounter atomic] Signed-off-by:
Rik van Riel <riel@redhat.com> Suggested-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Chegu Vinod <chegu_vinod@hp.com> Cc: Jason Low <jason.low2@hp.com> Reviewed-by:
Michel Lespinasse <walken@google.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Tested-by:
Emmanuel Benisty <benisty.e@gmail.com> Tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
Rik van Riel authored
Having only one list in struct sem_queue, and only queueing simple semaphore operations on the list for the semaphore involved, allows us to introduce finer grained locking for semtimedop. Signed-off-by:
-
Rik van Riel authored
Rename sem_lock() to sem_obtain_lock(), so we can introduce a sem_lock() later that only locks the sem_array and does nothing else. Open code the locking from ipc_lock() in sem_obtain_lock() so we can introduce finer grained locking for the sem_array in the next patch. [akpm@linux-foundation.org: propagate the ipc_obtain_object() errno out of sem_obtain_lock()] Signed-off-by:
-
Davidlohr Bueso authored
Instead of holding the ipc lock for permissions and security checks, among others, only acquire it when necessary. Some numbers.... 1) With Rik's semop-multi.c microbenchmark we can see the following results: Baseline (3.9-rc1): cpus 4, threads: 256, semaphores: 128, test duration: 30 secs total operations: 151452270, ops/sec 5048409 + 59.40% a.out [kernel.kallsyms] [k] _raw_spin_lock + 6.14% a.out [kernel.kallsyms] [k] sys_semtimedop + 3.84% a.out [kernel.kallsyms] [k] avc_has_perm_flags + 3.64% a.out [kernel.kallsyms] [k] __audit_syscall_exit + 2.06% a.out [kernel.kallsyms] [k] copy_user_enhanced_fast_string + 1.86% a.out [kernel.kallsyms] [k] ipc_lock With this patchset: cpus 4, threads: 256, semaphores: 128, test duration: 30 secs total operations: 273156400, ops/sec 9105213 + 18.54% a.out [kernel.kallsyms] [k] _raw_spin_lock + 11.72% a.out [kernel.kallsyms] [k] sys_semtimedop + 7.70% a.out [kernel.kallsyms] [k] ipc_has_perm.isra.21 + 6.58% a.out [kernel.kallsyms] [k] avc_has_perm_flags + 6.54% a.out [kernel.kallsyms] [k] __audit_syscall_exit + 4.71% a.out [kernel.kallsyms] [k] ipc_obtain_object_check 2) While on an Oracle swingbench DSS (data mining) workload the improvements are not as exciting as with Rik's benchmark, we can see some positive numbers. For an 8 socket machine the following are the percentages of %sys time incurred in the ipc lock: Baseline (3.9-rc1): 100 swingbench users: 8,74% 400 swingbench users: 21,86% 800 swingbench users: 84,35% With this patchset: 100 swingbench users: 8,11% 400 swingbench users: 19,93% 800 swingbench users: 77,69% [riel@redhat.com: fix two locking bugs] [sasha.levin@oracle.com: prevent releasing RCU read lock twice in semctl_main] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Chegu Vinod <chegu_vinod@hp.com> Acked-by:
-
Davidlohr Bueso authored
Various forms of ipc use ipcctl_pre_down() to retrieve an ipc object and check permissions, mostly for IPC_RMID and IPC_SET commands. Introduce ipcctl_pre_down_nolock(), a lockless version of this function. The locking version is retained, yet modified to call the nolock version without affecting its semantics, thus transparent to all ipc callers. Signed-off-by:
-
Davidlohr Bueso authored
Through ipc_lock() and therefore ipc_lock_check() we currently return the locked ipc object. This is not necessary for all situations and can, therefore, cause unnecessary ipc lock contention. Introduce analogous ipc_obtain_object() and ipc_obtain_object_check() functions that only lookup and return the ipc object. Both these functions must be called within the RCU read critical section. [akpm@linux-foundation.org: propagate the ipc_obtain_object() errno from ipc_lock()] Signed-off-by:
-
Davidlohr Bueso authored
This series makes the sysv semaphore code more scalable, by reducing the time the semaphore lock is held, and making the locking more scalable for semaphore arrays with multiple semaphores. The first four patches were written by Davidlohr Buesso, and reduce the hold time of the semaphore lock. The last three patches change the sysv semaphore code locking to be more fine grained, providing a performance boost when multiple semaphores in a semaphore array are being manipulated simultaneously. On a 24 CPU system, performance numbers with the semop-multi test with N threads and N semaphores, look like this: vanilla Davidlohr's Davidlohr's + Davidlohr's + threads patches rwlock patches v3 patches 10 610652 726325 1783589 2142206 20 341570 365699 1520453 1977878 30 288102 307037 1498167 2037995 40 290714 305955 1612665 2256484 50 288620 312890 1733453 2650292 60 289987 306043 1649360 2388008 70 291298 306347 1723167 2717486 80 290948 305662 1729545 2763582 90 290996 306680 1736021 2757524 100 292243 306700 1773700 3059159 This patch: There is no reason to be holding the ipc lock while reading ipcp->seq, hence remove misleading comment. Also simplify the return value for the function. Signed-off-by:
-
HoSung Jung authored
Signed-off-by:
HoSung Jung <rain6557@gmail.com> Signed-off-by:
-
Peter Hurley authored
[fengguang.wu@intel.com: find_msg can be static] Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Peter Hurley authored
Signed-off-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
-
Peter Hurley authored
Teach the helper routines about MSG_COPY so that msgtyp is preserved as the message number to copy. The security functions affected by this change were audited and no additional changes are necessary. Signed-off-by:
-
