- 26 Jan, 2020 6 commits
-
-
Christophe Leroy authored
To support CONFIG_VMAP_STACK, the kernel has to activate Data MMU Translation for accessing the stack. Before doing that it must save SRR0, SRR1 and also DAR and DSISR when relevant, in order to not loose them in case there is a Data TLB Miss once the translation is reactivated. This patch adds fields in thread struct for saving those registers. It prepares entry_32.S to handle exception entry with Data MMU Translation enabled and alters EXCEPTION_PROLOG macros to save SRR0, SRR1, DAR and DSISR then reenables Data MMU. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a775a1fea60f190e0f63503463fb775310a2009b.1576916812.git.christophe.leroy@c-s.fr
-
Christophe Leroy authored
Refactor reading and saving of DAR and DSISR in exception vectors. This will ease the implementation of VMAP stack. Signed-off-by:
-
Christophe Leroy authored
In order to simplify VMAP stack implementation, move MSR_PR test into EXCEPTION_PROLOG_0. This requires to not modify cr0 between EXCEPTION_PROLOG_0 and EXCEPTION_PROLOG_1. Signed-off-by:
-
Christophe Leroy authored
handle_page_fault() is the only function that save DAR/DEAR itself. Save DAR/DEAR before calling handle_page_fault() to prepare for VMAP stack which will require to save even before. Signed-off-by:
-
Christophe Leroy authored
This patch creates a macro for the very first part of exception prolog, this will help when implementing CONFIG_VMAP_STACK Signed-off-by:
-
Christophe Leroy authored
On PPC32, MTMSRD() is simply defined as mtmsr. Replace MTMSRD(reg) by mtmsr reg in files dedicated to PPC32, this makes the code less obscure. Signed-off-by:
-
- 25 Jan, 2020 9 commits
-
-
Oliver O'Halloran authored
Some newer cards supported by aacraid can take up to 40s to recover after an EEH event. This causes spurious failures in the basic EEH self-test since the current maximim timeout is only 30s. Fix the immediate issue by bumping the timeout to a default of 60s, and allow the wait time to be specified via an environmental variable (EEH_MAX_WAIT). Reported-by:
Steve Best <sbest@redhat.com> Suggested-by:
Douglas Miller <dougmill@us.ibm.com> Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Michael Bringmann authored
Correct overflow problem in calculation and display of Maximum Memory value to syscfg. Signed-off-by:
Michael Bringmann <mwb@linux.ibm.com> [mpe: Only n_lmbs needs casting to unsigned long] Signed-off-by:
-
Jordan Niethe authored
Commit a25bd72b ("powerpc/mm/radix: Workaround prefetch issue with KVM") introduced a number of workarounds as coming out of a guest with the mmu enabled would make the cpu would start running in hypervisor state with the PID value from the guest. The cpu will then start prefetching for the hypervisor with that PID value. In Power9 DD2.2 the cpu behaviour was modified to fix this. When accessing Quadrant 0 in hypervisor mode with LPID != 0 prefetching will not be performed. This means that we can get rid of the workarounds for Power9 DD2.2 and later revisions. Add a new cpu feature CPU_FTR_P9_RADIX_PREFETCH_BUG to indicate if the workarounds are needed. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Acked-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Vaibhav Jain authored
String 'bus_desc.provider_name' allocated inside papr_scm_nvdimm_init() will leaks in case call to nvdimm_bus_register() fails or when papr_scm_remove() is called. This minor patch ensures that 'bus_desc.provider_name' is freed in error path for nvdimm_bus_register() as well as in papr_scm_remove(). Fixes: b5beae5e ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
Fix couple of compile errors I stumbled upon with CONFIG_XMON=y and CONFIG_XMON_DISASSEMBLY=n Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Leroy authored
Instead of opencoding, use probe_user_read() to failessly read a user location and probe_user_write() for writing to user. Signed-off-by:
-
Chen Zhou authored
Fixes coccicheck warning: arch/powerpc/platforms/maple/setup.c:232:15-16: WARNING comparing pointer to 0 Compare pointer-typed values to NULL rather than 0. Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
-
Tyrel Datwyler authored
Commit e5afdf9d ("powerpc/vfio_spapr_tce: Add reference counting to iommu_table") missed an iommu_table allocation in the pseries vio code. The iommu_table is allocated with kzalloc and as a result the associated kref gets a value of zero. This has the side effect that during a DLPAR remove of the associated virtual IOA the iommu_tce_table_put() triggers a use-after-free underflow warning. Call Trace: [c0000002879e39f0] [c00000000071ecb4] refcount_warn_saturate+0x184/0x190 (unreliable) [c0000002879e3a50] [c0000000000500ac] iommu_tce_table_put+0x9c/0xb0 [c0000002879e3a70] [c0000000000f54e4] vio_dev_release+0x34/0x70 [c0000002879e3aa0] [c00000000087cfa4] device_release+0x54/0xf0 [c0000002879e3b10] [c000000000d64c84] kobject_cleanup+0xa4/0x240 [c0000002879e3b90] [c00000000087d358] put_device+0x28/0x40 [c0000002879e3bb0] [c0000000007a328c] dlpar_remove_slot+0x15c/0x250 [c0000002879e3c50] [c0000000007a348c] remove_slot_store+0xac/0xf0 [c0000002879e3cd0] [c000000000d64220] kobj_attr_store+0x30/0x60 [c0000002879e3cf0] [c0000000004ff13c] sysfs_kf_write+0x6c/0xa0 [c0000002879e3d10] [c0000000004fde4c] kernfs_fop_write+0x18c/0x260 [c0000002879e3d60] [c000000000410f3c] __vfs_write+0x3c/0x70 [c0000002879e3d80] [c000000000415408] vfs_write+0xc8/0x250 [c0000002879e3dd0] [c0000000004157dc] ksys_write+0x7c/0x120 [c0000002879e3e20] [c00000000000b278] system_call+0x5c/0x68 Further, since the refcount was always zero the iommu_tce_table_put() fails to call the iommu_table release function resulting in a leak. Fix this issue be initilizing the iommu_table kref immediately after allocation. Fixes: e5afdf9d ("powerpc/vfio_spapr_tce: Add reference counting to iommu_table") Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Aneesh Kumar K.V authored
Setting ND_REGION_PAGEMAP flag implies namespace mode defaults to fsdax mode. This also means kernel ends up creating struct page backing for these namspace ranges. With large namespaces that is not the right thing to do. We should let the user select the mode he/she wants the namespace to be created with. Hence disable ND_REGION_PAGEMAP for papr_scm regions. We still keep the flag for of_pmem because it supports only small persistent memory regions. This is similar to what is done for x86 with commit commit: 004f1afb ("libnvdimm, pmem: direct map legacy pmem by default") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
- 23 Jan, 2020 25 commits
-
-
Greg Kurz authored
As reported by ./scripts/checkpatch.pl --strict: CHECK: extern prototypes should be avoided in .h files Signed-off-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
-
Greg Kurz authored
Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Laurentiu Tudor authored
Michael Ellerman made a call for volunteers from NXP to maintain this driver and I offered myself. Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by:
Timur Tabi <timur@kernel.org> Signed-off-by:
-
Oliver O'Halloran authored
This is only used in pci-ioda.c so move it there and rename it to match. Signed-off-by:
-
Oliver O'Halloran authored
pnv_pci_dma_dev_setup() does nothing but call the phb->dma_dev_setup() callback, if one exists. That callback is only set for normal PCIe PHBs so we can remove the layer of indirection and use the ioda version in the pci_controller_ops. Signed-off-by:
-
Oliver O'Halloran authored
An ioda_pe for each VF is allocated in pnv_pci_sriov_enable() before the pci_dev for the VF is created. We need to set the pe->pdev pointer at some point after the pci_dev is created. Currently we do that in: pcibios_bus_add_device() pnv_pci_dma_dev_setup() (via phb->ops.dma_dev_setup) /* fixup is done here */ pnv_pci_ioda_dma_dev_setup() (via pnv_phb->dma_dev_setup) The fixup needs to be done before setting up DMA for for the VF's PE, but there's no real reason to delay it until this point. Move the fixup into pnv_pci_ioda_fixup_iov() so the ordering is: pcibios_add_device() pnv_pci_ioda_fixup_iov() (via ppc_md.pcibios_fixup_sriov) pcibios_bus_add_device() ... This isn't strictly required, but it's a slightly more logical place to do the fixup and it simplifies pnv_pci_dma_dev_setup(). Signed-off-by:
-
Oliver O'Halloran authored
The pnv_pci_dma_dev_setup() only does something when: 1) There PHB contains VFs, or 2) The PHB defines a dma_dev_setup() callback in the pnv_phb structure. Neither is true for NPU PHBs so there's no reason to set the callback. Reviewed-by:
-
Oliver O'Halloran authored
pcibios_bus_add_device() is the only caller of pcibios_setup_device(). Fold them together since there's no real reason to keep them separate. Signed-off-by:
-
Oliver O'Halloran authored
OPAL provides several different kinds of reboot for the kernel to use, namely forcing a full reboot, platform error reboot and MPIPL. Right now triggering the alternative resets requires some ad-hoc method such as triggering a kernel crash and hoping the stars align. It's sometimes handy to be able to trigger one of these resets directly, so add a way to do that. Signed-off-by:
-
Oliver O'Halloran authored
On PowerNV a few different kinds of reboot are supported. We'd like to be able to exercise these from xmon so allow 'zr' to take an argument, and pass that to the ppc_md.restart() function. Signed-off-by:
-
Oliver O'Halloran authored
Long before we had a generic way for firmware to export memory ranges of interest we added a special case for the skiboot symbol map. The code is pretty much identical to the generic export so re-use the code. Signed-off-by:
-
Oliver O'Halloran authored
Originally we only had a handful of exported memory ranges, but we'd to export the per-core trace buffers. This results in a lot of files in the exports directory which is a but unfortunate. We can clean things up a bit by turning subnodes into subdirectories of the exports directory. Signed-off-by:
-
Oliver O'Halloran authored
Many drivers don't check for errors when they get a 0xFFs response from an MMIO load. As a result after an EEH event occurs a driver can get stuck in a polling loop unless it some kind of internal timeout logic. Currently EEH tries to detect and report stuck drivers by dumping a stack trace after eeh_dev_check_failure() is called EEH_MAX_FAILS times on an already frozen PE. The value of EEH_MAX_FAILS was chosen so that a dump would occur every few seconds if the driver was spinning in a loop. This results in a lot of spurious stack traces in the kernel log. Fix this by limiting it to printing one stack trace for each PE freeze. If the driver is truely stuck the kernel's hung task detector is better suited to reporting the probelm anyway. Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Tested-by:
-
Oliver O'Halloran authored
Add a debugfs entry to dump the state of the active IODA PEs. The IODA PE state reflects how the PHB's internal concept of a PE is configured. This is separate to the EEH PE state and is managed power the PowerNV PCI backend rather than the EEH core. Signed-off-by:
-
Oliver O'Halloran authored
Make the dump trigger off any input rather than just '1'. This allows you to write "echo 1> dump_diag_data" and it'll do what you want rather than erroring out pointlessly. Signed-off-by:
-
Oliver O'Halloran authored
Use the pnv_phb structure as the private data pointer for the debugfs files. This lets us delete some code and an open-coded use of hose->private_data. Signed-off-by:
-
Oliver O'Halloran authored
These functions can only be used on a SR-IOV capable physical function and they're only called in pcibios_sriov_enable / disable. Make them emit a warning in the future if they're used incorrectly and remove the dead code that checks if the device is a VF. Signed-off-by:
-
Oliver O'Halloran authored
The powerpc PCI code requires that a pci_dn structure exists for all devices in the system. This is fine for real devices since at boot a pci_dn is created for each PCI device in the DT and it's fine for hotplugged devices since the hotplug slot driver will manage the pci_dn's devices in hotplug slots. For SR-IOV, we need the platform / pcibios to manage the pci_dn for virtual functions since firmware is unaware of VFs, and they aren't "hot plugged" in the traditional sense. Management of the pci_dn is handled by the, poorly named, functions: add_pci_dev_data() and remove_pci_dev_data(). The entire body of these functions is #ifdef`ed around CONFIG_PCI_IOV and they cannot be used in any other context, so make them only available when CONFIG_PCI_IOV is selected, and rename them to reflect their actual usage rather than having them masquerade as generic code. Signed-off-by:
-
Oliver O'Halloran authored
When disabling virtual functions on an SR-IOV adapter we currently do not correctly remove the EEH state for the now-dead virtual functions. When removing the pci_dn that was created for the VF when SR-IOV was enabled we free the corresponding eeh_dev without removing it from the child device list of the eeh_pe that contained it. This can result in crashes due to the use-after-free. Signed-off-by:
-
Oliver O'Halloran authored
The eeh_sysfs_remove_device() function is supposed to clear the EEH_DEV_SYSFS flag since it indicates the EEH sysfs entries have been added for a pci_dev. When the sysfs files are removed eeh_remove_device() the eeh_dev and the pci_dev have already been de-associated. This then causes the pci_dev_to_eeh_dev() call in eeh_sysfs_remove_device() to return NULL so the flag can't be cleared from the still-live eeh_dev. This problem is worked around in the caller by clearing the flag manually. However, this behaviour doesn't make a whole lot of sense, so this patch fixes it by: a) Re-ordering eeh_remove_device() so that eeh_sysfs_remove_device() is called before de-associating the pci_dev and eeh_dev. b) Making eeh_sysfs_remove_device() emit a warning if there's no corresponding eeh_dev for a pci_dev. The paths where the sysfs files are only reachable if EEH was setup for the device for the device in the first place so hitting this warning indicates a programming error. Signed-off-by:
-
Oliver O'Halloran authored
In eeh_notify_resume_show() the pci_dn for the device is looked up once in the declaration block and then once after checking for a NULL eeh_dev. Remove the second lookup since it's pointless. Signed-off-by:
-
Oliver O'Halloran authored
There are several EEH sysfs properties that only exists when the "ibm,is-open-sriov-pf" property appears in the device tree node of the PCI device. This used on pseries to indicate to the guest that the hypervisor allows the guest to configure the SR-IOV capability. Doing this requires some handshaking between the guest, hypervisor and userspace when a VF is EEH frozen which is why these properties exist. This is all dead code on non-pseries platforms so wrap it in an #ifdef CONFIG_PPC_PSERIES to make the dependency clearer. Signed-off-by:
-
Oliver O'Halloran authored
The EEH_ATTR_SHOW() helper is used to display fields from struct eeh_dev not struct pci_dn. Signed-off-by:
-
Oliver O'Halloran authored
At the point where we start inserting ranges into the EEH address cache the binding between pci_dev and eeh_dev has already been set up. Instead of consulting the pci_dn tree we can retrieve the eeh_dev directly using pci_dev_to_eeh_dev(). Signed-off-by:
-
