This patch adds support for configuring keyboard backlight settings on supported
Dell laptops. It exports kernel leds interface and uses Dell SMBIOS tokens or
keyboard class interface.

With this patch it is possible to set:
* keyboard backlight level
* timeout after which will be backlight automatically turned off
* input activity triggers (keyboard, touchpad, mouse) which enable backlight
* ambient light settings

Settings are exported via sysfs:
/sys/class/leds/dell::kbd_backlight/

Code is based on newly released documentation by Dell in libsmbios project.

Thanks to Dan Carpenter who reported bug about unpredictable results in
quirks->kbd_timeouts for loop. His fix adds needs_kbd_timeouts flag to
quirk structure to indicate if kbd_timeouts array is empty or not.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Minor English corrections to comments.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

A previous patch added support to handle more events.

This patch adds support to update the sysfs group whenever we receive
a 0x92 event, which indicates a change in the keyboard backlight mode,
removing the update group code from toshiba_kbd_bl_mode_store, as it is
no longer needed there.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Currently the function toshiba_acpi_notify only takes care of hotkeys,
however, the TOSXXXX devices receive more events that can be useful.

This patch changes the function to be able to handle more events,
and in the process, move all hotkey related code residing in it to
a new function called toshiba_acpi_process_hotkeys.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

The hotkey enabling code is being used by *_setup_keyboard and also by
*_resume.

This patch creates a new function called toshiba_acpi_enable_hotkeys to
be used by these two functions to avoid duplicating code.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Keyboard illumination level changes are performed by the BIOS, so no
events should be reported on keypress. This is already done on systems
using the legacy keymap, do it also for systems that don't use it.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>

The WMI events associated to KEY_WLAN are for all the radio devices
available. Use KEY_RFKILL instead since it's more appropriate.

The state of radio devices is changed directly by the BIOS when hotkeys
are pressed, so no events should be reported.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Merged two patches modifying this one line
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

In hpwl_add() there is a unused variable err to which we assign the
result of hp_wireless_input_setup() but we don't do anything depending
on the result so print out a message that informs the user if add()
(hp_wireless_input_setup()) fails since acpi_device_probe() doesn't
print anything in this case.
Signed-off-by: Giedrius Statkevicius <giedriuswork@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

toshiba-acpi was always missing TOS6207 ID so it did not load automatically
on some laptops (such as Portege R100). But it worked fine if loaded manually.
Commit 135740de ("toshiba_acpi: Convert to use acpi_driver") broke that
and the driver does not work even when loaded manually since then.

Add TOS6207 ID to fix it.

Tested on Toshiba Portege R100.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

The pci_dev_put() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

The backlight_device_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
For msi-wmi.c:
Acked-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Bug 86521 uncovered that some TOS6208 devices also return
non zero values on a write call to the backlight method,
thus getting caught and bailed out by the extra check code.

This patch changes the set_lcd_brightness function to its
"original" state by just adapting it to the new function
format.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Wifi on this laptop does not work unless asus-nb-wmi.wapf=4 is specified on
the kerne commandline, add a quirk for this.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1173681Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

HP ZBook 15 laptop needs a non-standard mapping (x_inverted).

BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=905329Signed-off-by: Dominique Leuenberger <dimstar@opensuse.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

The WMI buffer can contain multiple events. First value in buffer is
length of event followed by data of specified length. After that is next
length and next data.  When length is zero then there is no more events
in bufffer.

This patch adds support for processing all events in buffer (not only
first) and parse more event types (not only hotkey events). Because of
variable length of events sometimes BIOS fills more hotkeys (or other
values) into single WMI event. In this case this patch also processes
these multiple hotkeys (and not only first one).

Some event types are just ignored because kernel is not interested in
them (e.g. NIC Link status, battery unplug, ...).

This patch is based on DSDT table from Dell Latitude E6440. Code should
be backward compatible so will process other events of old types same as
before this patch.

This patch also fixes a problem with unknown WMI event messages being
written to the log. Now all known events are parsed and those which are
not interesting to the kernel are dropped without an unknown WMI event
message.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

eeepc_acpi_notify increases the indentation level to a whopping four. If
we revise the conditions a bit, we can reduce that to a more soothing
two and satisfy the indentation guidelines in Documentation/CodingStyle.

Remove an unwanted space while we're in the neighbourhood.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

s/tempurature/temperature/
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

In eeepc_hotk_thaw, we assume that get_acpi() will effectively return a
bool. However, it is possible that get_acpi() returns an error instead.
We should not be writing error values to the ACPI device, even though
it's quite possible that we couldn't contact the ACPI device in the
first place.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

eeepc_get_fan_pwm and eeepc_set_fan_pwm convert the PWM value read from
the fan to a range lmsensors understands. Unfortunately this is only
clear if you are familiar with how lmsensors handles duty cycles.

Introduce two conversion functions that document the goal of these
conversions.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

eeepc_[gs]et_fan_ctrl uses some magic numbers. These numbers mean
something more than just the number. Describe them with macros instead
of comments in one of the functions.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

The rfkill notifier node names are used in three different places. As a
matter of style, it is better to store them somewhere and have the
compiler warn us about typos in the function arguments.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

As per Documentation/CodingStyle ch. 2, it is preferred that we don't
break user visible strings, in order to allow users to grep for them.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

In eeepc_rfkill_hotplug there's an if statement with a big tail that
ends right before the out_unlock label. We might as well invert the
condition and jump to out_unlock in that case, pretty much like the rest
of the code does. This removes an indentation level for a large chunk of
code and also stops suggesting there might be an else clause.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Instead of using a magic constant 0x20 in some drivers to get data only
from the KBC port we should use the constant defined in i8042.h with
the same value. Also, this makes these drivers uniform with what
constant the only other filter function uses in
drivers/input/misc/ideapad_slidebar.c.
Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Pull ARM SoC fixes from Olof Johansson:
 "Another small set of fixes:

   - some DT compatible typo fixes
   - irq setup fix dealing with irq storms on orion
   - i2c quirk generalization for mvebu
   - a handful of smaller fixes for OMAP
   - a couple of added file patterns for OMAP entries in MAINTAINERS"

* tag 'armsoc-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: at91/dt: Fix sama5d3x typos
  pinctrl: dra: dt-bindings: Fix output pull up/down
  MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  MAINTAINERS: add more files under OMAP SUPPORT
  ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage
  ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage
  ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage
  ARM: dts: am335x-evm: Fix 5th NAND partition's name
  ARM: orion: Fix for certain sequence of request_irq can cause irq storm
  ARM: mvebu: armada xp: Generalize use of i2c quirk

Pull sparc fixes from David Miller:

 1) Fix NULL oops in Schizo PCI controller error handler.

 2) Fix race between xchg and other operations on 32-bit sparc, from
    Andreas Larsson.

 3) swab*() helpers need a dummy memory input operand to show data flow
    on 64-bit sparc.

 4) Fix RCU warnings due to missing irq_{enter,exit}() around
    generic_smp_call_function*() calls.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix constraints on swab helpers.
  sparc32: Implement xchg and atomic_xchg using ATOMIC_HASH locks
  sparc64: Do irq_{enter,exit}() around generic_smp_call_function*().
  sparc64: Fix crashes in schizo_pcierr_intr_other().

Pull md bugfix from Neil Brown:
 "One fix for md for 3.18.

  This fixes a regression introduced in 3.13"

* tag 'md/3.18-fix' of git://neil.brown.name/md:
  md: Always set RECOVERY_NEEDED when clearing RECOVERY_FROZEN

Some DT files had a typo with a missing "5" in sama5d3x first compatible string.
Signed-off-by: Peter Rosin <peda@axentia.se>
[nicolas.ferre@atmel.com: modify commit log]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge "omap fixes against v3.18-rc4" from Tony Lindgren:

Few omap fixes for hangs and wrong pinctrl defines, and update
MAINTAINERS file to avoid missing PMIC and SoC related patches:

- Fix random hangs on am437x because of incorrect default
  value for the DDR regulator

- Fix wrong partition name for NAND on am335x-evm

- Fix wrong pinctrl defines for dra7xx

- Update maintainers entries for PMICs and SoCs

* tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  pinctrl: dra: dt-bindings: Fix output pull up/down
  MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  MAINTAINERS: add more files under OMAP SUPPORT
  ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage
  ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage
  ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage
  ARM: dts: am335x-evm: Fix 5th NAND partition's name
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "mvebu fixes for v3.18" from Jason Cooper:

 - Armada XP
    - Generalize i2c quirk

 - orion
    - Fix irq storm caused by specific sequence of request_irq

* tag 'mvebu-fixes-3.18' of git://git.infradead.org/linux-mvebu:
  ARM: orion: Fix for certain sequence of request_irq can cause irq storm
  ARM: mvebu: armada xp: Generalize use of i2c quirk

md_check_recovery will skip any recovery and also clear
MD_RECOVERY_NEEDED if MD_RECOVERY_FROZEN is set.
So when we clear _FROZEN, we must set _NEEDED and ensure that
md_check_recovery gets run.
Otherwise we could miss out on something that is needed.

In particular, this can make it impossible to remove a
failed device from an array is the  'recovery-needed' processing
didn't happen.
Suitable for stable kernels since 3.13.

Cc: stable@vger.kernel.org (3.13+)
Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Fixes: 30b8feb7Signed-off-by: NeilBrown <neilb@suse.de>

We are reading the memory location, so we have to have a memory
constraint in there purely for the sake of showing the data flow
to the compiler.
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "This is a set of six fixes and a MAINTAINER update.

  The fixes are two multipath (one in Test Unit Ready handling for the
  path checkers and one in the section of code that sends a start unit
  after failover; both of these were perturbed by the scsi-mq update), a
  CD-ROM door locking fix that was likewise introduced by scsi-mq and
  three driver fixes for a previous code update in cxgb4i, megaraid_sas
  and bnx2fc"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  bnx2fc: fix tgt spinlock locking
  megaraid_sas: fix bug in handling return value of pci_enable_msix_range()
  cxgb4i: send abort_rpl correctly
  cxgbi: add maintainer for cxgb3i/cxgb4i
  scsi: TUR path is down after adapter gets reset with multipath
  scsi: call device handler for failed TUR command
  scsi: only re-lock door after EH on devices that were reset

Pull x86 fixes from Ingo Molnar:
 "Microcode fixes, a Xen fix and a KASLR boot loading fix with certain
  memory layouts"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Fix ucode patch stashing on 32-bit
  x86/core, x86/xen/smp: Use 'die_complete' completion when taking CPU down
  x86, microcode: Fix accessing dis_ucode_ldr on 32-bit
  x86, kaslr: Prevent .bss from overlaping initrd
  x86, microcode, AMD: Fix early ucode loading on 32-bit

Al Viro pointed out that the x86-64 csum_partial_copy_from_user() is
somewhat confused about what it should do on errors, notably it mostly
clears the uncopied end result buffer, but misses that for the initial
alignment case.

All users should check for errors, so it's dubious whether the clearing
is even necessary, and Al also points out that we should probably clean
up the calling conventions, but regardless of any future changes to this
function, the fact that it is inconsistent is just annoying.

So make the __get_user() failure path use the same error exit as all the
other errors do.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM fixes from Russell King:
 "Two fixes this time, one to ensure that the kuser helper option
  depends on MMU as they aren't available for noMMU targets (and if the
  option is selected, we end up oopsing.)

  The second fix plugs a corner case with the decompressor, ensuring
  that the instruction stream can see the relocated code in every case
  on ARMv7 CPUs"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8198/1: make kuser helpers depend on MMU
  ARM: 8191/1: decompressor: ensure I-side picks up relocated code

Pull parisc updates from Helge Deller:
 "Changes include:
   - wire up the bpf syscall
   - remove CONFIG_64BIT usage from some userspace-exported header files
   - use compat functions for msgctl, shmat, shmctl and semtimedop
     syscalls"

* 'parisc-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Avoid using CONFIG_64BIT in userspace exported headers
  parisc: Use compat layer for msgctl, shmat, shmctl and semtimedop syscalls
  parisc: Use BUILD_BUG() instead of undefined functions
  parisc: Wire up bpf syscall

Pull power supply updates from Sebastian Reichel:
 "Power supply and reset changes for the v3.18-rc:

   - misc. charger-manager fixes
   - year 2038 fix in ab8500_fg
   - fix error handling of bq2415x_charger"

* tag 'for-v3.18-rc' of git://git.infradead.org/battery-2.6:
  power: charger-manager: Fix accessing invalidated power supply after charger unbind
  power: charger-manager: Fix accessing invalidated power supply after fuel gauge unbind
  power: charger-manager: Avoid recursive thermal get_temp call
  power_supply: Add no_thermal property to prevent recursive get_temp calls
  power: bq2415x_charger: Fix memory leak on DTS parsing error
  power: bq2415x_charger: Properly handle ENODEV from power_supply_get_by_phandle
  power: ab8500_fg.c: use 64-bit time types

Pull drm gixes from Dave Airlie:
 - exynos: infinite loop regressions fixed
 - i915: one regression
 - radeon: one race condition on monitor probing
 - noveau: two regressions
 - tegra: one vblank regression fix

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/tegra: dc: Add missing call to drm_vblank_on()
  drm/nouveau/nv50/disp: Fix modeset on G94
  drm/gk20a/fb: fix setting of large page size bit
  drm/radeon: add locking around atombios scratch space usage
  drm/i915: Fix obj->map_and_fenceable across tiling changes
  drm/exynos: fix possible infinite loop issue
  drm/exynos: g2d: fix null pointer dereference
  drm/exynos: resolve infinite loop issue on non multi-platform
  drm/exynos: resolve infinite loop issue on multi-platform

Sasha Levin reports:
 "gcc5 changes the default standard to c11, which makes kernel build
  unhappy

  Explicitly define the kernel standard to be gnu89 which should keep
  everything working exactly like it was before gcc5"

There are multiple small issues with the new default, but the biggest
issue seems to be that the old - and very useful - GNU extension to
allow a cast in front of an initializer has gone away.

Patch updated by Kirill:
 "I'm pretty sure all gcc versions you can build kernel with supports
  -std=gnu89.  cc-option is redunrant.

  We also need to adjust HOSTCFLAGS otherwise allmodconfig fails for me"

Note by Andrew Pinski:
 "Yes it was reported and both problems relating to this extension has
  been added to gnu99 and gnu11.  Though there are other issues with the
  kernel dealing with extern inline have different semantics between
  gnu89 and gnu99/11"

End result: we may be able to move up to a newer stdc model eventually,
but right now the newer models have some annoying deficiencies, so the
traditional "gnu89" model ends up being the preferred one.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Singed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>