Also convert the spinlock to a mutex.

Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

udp_config.local_udp_port is be16. And iproute2 passes
network order for FOU_ATTR_PORT.

This doesn't fix any bug, just for consistency.

Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not a big deal, just for corretness.

Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes the following harmless warning:

./ip/ip fou del port 7777
[  122.907516] udp_del_offload: didn't find offload for port 7777

Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nicolas Dichtel says:

====================
selinux: add missing xfrm nl cmd

With this series, xfrm commands are fully synchronized.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This command is missing.

Fixes: 3a2dfbe8 ("xfrm: Notify changes in UDP encapsulation via netlink")
CC: Martin Willi <martin@strongswan.org>
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This command is missing.

Fixes: 5c79de6e ("[XFRM]: User interface for handling XFRM_MSG_MIGRATE")
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This command is missing.

Fixes: 97a64b45 ("[XFRM]: Introduce XFRM_MSG_REPORT.")
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With recent adoption of skc_cookie in struct sock_common,
struct tcp_timewait_sock size increased from 192 to 200 bytes
on 64bit arches. SLAB rounds then to 256 bytes.

It is time to drop SLAB_HWCACHE_ALIGN constraint for twsk_slab.

This saves about 12 MB of memory on typical configuration reaching
262144 timewait sockets, and has no noticeable impact on performance.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2015-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
There isn't much left, but we have
 * new mac80211 internal software queue to allow drivers to have
   shorter hardware queues and pull on-demand
 * use rhashtable for mac80211 station table
 * minstrel rate control debug improvements and some refactoring
 * fix noisy message about TX power reduction
 * fix continuous message printing and activity if CRDA doesn't respond
 * fix VHT-related capabilities with "iw connect" or "iwconfig ..."
 * fix Kconfig for cfg80211 wireless extensions compatibility
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The statistics are grouped by TX and RX errors.
The SQE Test Errors Register indicates problems with TX.
Signed-off-by: Wolfgang Steinwender <wsteinwender@pcs.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-04-10

This series contains updates to ixgbe and documentation for igb,
ixgbe and ixgb.

Stephen cleans up documentation to igb, ixgbe and ixgb.

Don updates how bridge mode is stored to minimize obfuscation and
makes updates for future silicon easier.  Adds a new bridge mode
support function which gathers all the logic needed to configure
bridge modes.  Adds Source Address Prunning for VEPA bridge mode
for x550 devices.

Vasu adds specific FCoE offloads for x550 for DDP context programming
and increased DDP exchanges.

Alex Duyck cleans up the use of HW_VLAN_CTAG_FILTER in hw_features,
where the driver was actually ignoring the value of the bit and was
just assuming it was always set.  Also cleans up the use of rcu_barrier()
since the driver has not used call_rcu() to free the rings for some
time now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ixgbe driver hasn't used call_rcu to free the rings for some time now.
Since that is the case the call to rcu_barrier can be dropped since calls
to kfree_rcu don't require it.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This change makes it so that the HW_VLAN_CTAG_FILTER bit is not falsely
advertised as being a feature that can be toggled on ixgbe parts.  The
driver was setting the bit in features and letting it be inherited by
hw_features, however the driver was actually ignoring the value of the bit
and just assuming it was always set.  As a result VLAN filtering was always
enabled which is a requirement for SR-IOV, VMDq, DCB, FCoE, and possibly
other features within the adapters.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Adds x550 specific FCoE offloads for DDP context programming and
increased DDP exchanges.
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch will enable X550 Source Address Prunning for VEPA
bridge mode.  This requires that we also have replication enabled
as well, while in this mode.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch gathers together all the logic needed to configure bridge
modes.  Currently that it is rather simple but this is really laying
the ground work for future X550 feature enhancement.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We are currently storing our BRIDGE_MODE as a bit in our adapter flags.
This patch will store the actual mode instead which minimizes obfuscation
and makes following patches for X550 simpler.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Move documentation into this century, even if this device hasn't
been available for some time.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The MTU values in the documentation do not match the source.
The source has frame limit of IXGBE_MAX_JUMBO_FRAME_SIZE (9728)
which is MTU of 9710 because of the accounting for Ethernet header
and CRC.

Also, don't refer to the obsolete ifconfig command.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ifconfig command is obsolete, best to remove all references so that
new users learn ip.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-04-09

We've had enough new patches during the past week (especially from
Marcel) that it'd be good to still get these queued for 4.1.

The majority of the changes are from Marcel with lots of cleanup &
refactoring patches for the HCI UART driver. Marcel also split out some
Broadcom & Intel vendor specific functionality into two new btintel &
btbcm modules.

In addition to the HCI driver changes there's the completion of our
local OOB data interface for pairing, added support for requesting
remote LE features when connecting, as well as a couple of minor fixes
for mac802154.

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Lookup key for tcp_md5_do_lookup() has to be taken
from addr_sk, not sk (which can be the listener)

Fixes: fd3a154a ("tcp: md5: get rid of tcp_v[46]_reqsk_md5_lookup()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2015-04-09

The following series of patches includes functional updates and changes
to the driver.

- Allow ethtool rx-frames coalescing to be changed while the device is up
- Consolidate initialization routine into the init function
- Add support for the TX watchdog timeout

This patch series is based on net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to be able to detect a hung Tx task by adding the netdev
ndo_tx_timeout function callback. Do not set the watchdog_timeo value
so as to use the system default time (currently 5 seconds).
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently a call to configure the Rx mode (promiscuous mode, all
multicast mode, etc.) is made in xgbe_start separate from the xgbe_init
function. This call to set the Rx mode should be part of the xgbe_init
function so that calls to the init function don't have to be preceded
with calls to configure the Rx mode.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the device must be down in order to update the rx-frames
coalescing setting because the interrupt indicator is set in the
descriptor data during initialization. Allow this setting to be changed
while the device is up by moving the interrupt decision into the
descriptor reset function and base the decision off of the supplied
descriptor index value.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an FDB entry is added or deleted the information about VLAN
is not passed to listening applications like 'bridge monitor fdb'.
With this patch VLAN ID is passed if it was set in the original
netlink message.

Also remove an unused bdev variable.
Signed-off-by: Hubert Sokolowski <hubert.sokolowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next tree.
They are:

* nf_tables set timeout infrastructure from Patrick Mchardy.

1) Add support for set timeout support.

2) Add support for set element timeouts using the new set extension
   infrastructure.

4) Add garbage collection helper functions to get rid of stale elements.
   Elements are accumulated in a batch that are asynchronously released
   via RCU when the batch is full.

5) Add garbage collection synchronization helpers. This introduces a new
   element busy bit to address concurrent access from the netlink API and the
   garbage collector.

5) Add timeout support for the nft_hash set implementation. The garbage
   collector peridically checks for stale elements from the workqueue.

* iptables/nftables cgroup fixes:

6) Ignore non full-socket objects from the input path, otherwise cgroup
   match may crash, from Daniel Borkmann.

7) Fix cgroup in nf_tables.

8) Save some cycles from xt_socket by skipping packet header parsing when
   skb->sk is already set because of early demux. Also from Daniel.

* br_netfilter updates from Florian Westphal.

9) Save frag_max_size and restore it from the forward path too.

10) Use a per-cpu area to restore the original source MAC address when traffic
    is DNAT'ed.

11) Add helper functions to access physical devices.

12) Use these new physdev helper function from xt_physdev.

13) Add another nf_bridge_info_get() helper function to fetch the br_netfilter
    state information.

14) Annotate original layer 2 protocol number in nf_bridge info, instead of
    using kludgy flags.

15) Also annotate the pkttype mangling when the packet travels back and forth
    from the IP to the bridge layer, instead of using a flag.

* More nf_tables set enhancement from Patrick:

16) Fix possible usage of set variant that doesn't support timeouts.

17) Avoid spurious "set is full" errors from Netlink API when there are pending
    stale elements scheduled to be released.

18) Restrict loop checks to set maps.

19) Add support for dynamic set updates from the packet path.

20) Add support to store optional user data (eg. comments) per set element.

BTW, I have also pulled net-next into nf-next to anticipate the conflict
resolution between your okfn() signature changes and Florian's br_netfilter
updates.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2015-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

iwlwifi:

* some more work on LAR
* fixes for UMAC scan
* more work on debugging framework
* more work for 8000 devices
* cleanups and small bugfixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2015-04-09

1) Prohibit the use/abuse of the xfrm netlink interface on
   32/64 bit compatibility tasks. We need a full compat
   layer before we can allow this. From Fan Du.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Duyck says:

====================
Replace wmb()/rmb() with dma_wmb()/dma_rmb() where appropriate, round 2

More cleanup of drivers in order to start making use of dma_rmb and dma_wmb
calls.  This is another pass of what I would consider to be low hanging
fruit.  There may be other opportunities to make use of the barriers in the
Mellanox and Chelsio drivers but I didn't want to risk meddling with code I
was not completely familiar with so I am leaving that for future work.

I have revisited the Mellanox driver changes.  This time around I went only
for the sections with a clearly defined pattern.  For dma_wmb I used it
between accesses of the descriptor bits followed by owner or size.  For
dma_rmb I used it to replace rmb following a read of the ownership bit in
the descriptor.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Reduce the CPU overhead for transmit and receive by using lightweight dma_
barriers instead of full barriers where they are applicable.

Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update i40e and i40evf to use dma_rmb.  This should improve performance by
decreasing the barrier overhead on strong ordered architectures.

Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch should help to improve the performance of the mlx4 and mlx5 on a
number of architectures.  For example, on x86 the dma_wmb/rmb equates out
to a barrer() call as the architecture is already strong ordered, and on
PowerPC the call works out to a lwsync which is significantly less expensive
than the sync call that was being used for wmb.

I placed the new barriers between any spots that seemed to be trying to
order memory/memory reads or writes, if there are any spots that involved
MMIO I left the existing wmb in place as the new barriers cannot order
transactions between coherent and non-coherent memories.

v2: Reduced the replacments to just the spots where I could clearly
    identify the usage pattern.

Cc: Amir Vadai <amirv@mellanox.com>
Cc: Ido Shamay <idos@mellanox.com>
Cc: Eli Cohen <eli@mellanox.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the Chelsio Ethernet drivers to use the dma_rmb/wmb calls instead of
the full barriers in order to improve performance.

Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Netlink attribute for the power is s8. But for the driver level
operations we are collection power level value into integer.
It has to be change to s8 from int.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The Intel vendors events indicating firmware loading result and the
bootup of the operational firmware are currently hardcoded byte
comparisons. So intead of doing that, provide proper data structures
and actually use them.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>