- 12 Mar, 2017 40 commits
-
-
Larry Finger authored
commit 6773386f upstream. Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu and rtl8192c-common: ================================================================== BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] at addr ffff8801c90edb08 Read of size 1 by task kworker/0:1/38 page:ffffea0007243800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000004000(head) page dumped because: kasan: bad access detected CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013 Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi] 0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08 ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297 ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8 Call Trace: [<ffffffff829eea33>] ? dump_stack+0x5c/0x79 [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0 [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb] [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50 [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common] ... The problem is due to rtl8192ce and rtl8192cu sharing routines, and having different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved by placing the struct bt_coexist_info at the head of each of those private areas. Reported-and-tested-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ping-Ke Shih authored
commit 40b368af upstream. The addresses of Wlan NIC registers are natural alignment, but some drivers have bugs. These are evident on platforms that need natural alignment to access registers. This change contains the following: 1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI, thus it should use rtl_read_byte(). 2. Register 0x4C7 of 8192ee is single byte. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Bjorn Andersson authored
commit 3e8b571a upstream. The "fw" firmware object is passed from the remoteproc core and should not be overwritten, as that results in leaked buffers and a double free of the the last firmware object. Fixes: 051fb70f ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5") Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Andrew Price authored
commit f38e5fb9 upstream. We must hold the rcu read lock across looking up glocks and trying to bump their refcount to prevent the glocks from being freed in between. Signed-off-by:
Andrew Price <anprice@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Steve Wise authored
commit f2625f7d upstream. cma_accept_iw() needs to return an error if conn_params is NULL. Since this is coming from user space, we can crash. Reported-by:
Shaobo He <shaobo@cs.utah.edu> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jason Gunthorpe authored
commit 55efcfcd upstream. The RDMA core uses ib_pack() to convert from unpacked CPU structs to on-the-wire bitpacked structs. This process requires that 1 bit fields are declared as u8 in the unpacked struct, otherwise the packing process does not read the value properly and the packed result is wired to 0. Several places wrongly used int. Crucially this means the kernel has never, set reversible correctly in the path record request. It has always asked for irreversible paths even if the ULP requests otherwise. When the kernel is used with a SM that supports this feature, it completely breaks communication management if reversible paths are not properly requested. The only reason this ever worked is because opensm ignores the reversible bit. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit d77044d1 upstream. VSS may use a char device to support the communication between the user level daemon and the driver. When the VSS channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new VSS offer from the host. Implement this logic. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 20951c75 upstream. Fcopy may use a char device to support the communication between the user level daemon and the driver. When the Fcopy channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new Fcopy offer from the host. Implement this logic. Signed-off-by:
-
K. Y. Srinivasan authored
commit 5a66fecb upstream. KVP may use a char device to support the communication between the user level daemon and the driver. When the KVP channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new KVP offer from the host. Implement this logic. Signed-off-by:
-
K. Y. Srinivasan authored
commit ccb61f8a upstream. The host can rescind a channel that has been offered to the guest and once the channel is rescinded, the host does not respond to any requests on that channel. Deal with the case where the guest may be blocked waiting for a response from the host. Signed-off-by:
-
K. Y. Srinivasan authored
commit e7e97dd8 upstream. After the channel is rescinded, the host does not read from the rescinded channel. Fail writes to a channel that has already been rescinded. If we permit writes on a rescinded channel, since the host will not respond we will have situations where we will be unable to unload vmbus drivers that cannot have any outstanding requests to the host at the point they are unoaded. Signed-off-by:
-
Vitaly Kuznetsov authored
commit 56ef6718 upstream. It may happen that secondary CPUs are still alive and resetting hv_context.tsc_page will cause a consequent crash in read_hv_clock_tsc() as we don't check for it being not NULL there. It is safe as we're not freeing this page anyways. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 3c7630d3 upstream. Initializing hv_context.percpu_list in hv_synic_alloc() helps to prevent a crash in percpu_channel_enq() when not all CPUs were online during initialization and it naturally belongs there. Signed-off-by:
-
Vitaly Kuznetsov authored
commit 421b8f20 upstream. It may happen that not all CPUs are online when we do hv_synic_alloc() and in case more CPUs come online later we may try accessing these allocated structures. Signed-off-by:
-
Krzysztof Opasiak authored
commit 749494b6 upstream. Since commit: ba1582f2 ("usb: gadget: f_hid: use alloc_ep_req()") we cannot allocate any requests in bind() as we check if we should align request buffer based on endpoint descriptor which is assigned in set_alt(). Allocating request in bind() function causes a NULL pointer dereference. This commit moves allocation of IN request from bind() to set_alt() to prevent this issue. Fixes: ba1582f2 ("usb: gadget: f_hid: use alloc_ep_req()") Tested-by:
David Lechner <david@lechnology.com> Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Krzysztof Opasiak authored
commit 33e4c1a9 upstream. As IN request has to be allocated in set_alt() and released in disable() we cannot use mutex to protect it as we cannot sleep in those funcitons. Let's replace this mutex with a spinlock. Tested-by:
-
Krzysztof Opasiak authored
commit aa65d11a upstream. When we unlock our spinlock to copy data to user we may get disabled by USB host and free the whole list of completed out requests including the one from which we are copying the data to user memory. To prevent from this let's remove our working element from the list and place it back only if there is sth left when we finish with it. Fixes: 99c51500 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by:
-
Krzysztof Opasiak authored
commit 20d2ca95 upstream. Requests for out endpoint are allocated in bind() function but never released. This commit ensures that all pending requests are released when we disable out endpoint. Fixes: 99c51500 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by:
-
Magnus Lilja authored
commit 5528954a upstream. Commit 304f7e5e ("usb: gadget: Refactor request completion") removed check if req->req.complete is non-NULL, resulting in a NULL pointer derefence and a kernel panic. This patch adds an empty complete function instead of re-introducing the req->req.complete check. Fixes: 304f7e5e ("usb: gadget: Refactor request completion") Signed-off-by:
Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by:
-
Krzysztof Opasiak authored
commit 8236800d upstream. Since: commit 855ed04a ("usb: gadget: udc-core: independent registration of gadgets and gadget drivers") if we load gadget module but there is no free udc available then it will be stored on a pending gadgets list. $ modprobe g_zero.ko $ modprobe g_ether.ko [] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers We scan this list each time when new UDC appears in system. But we can get a free UDC each time after gadget unbind. This commit add scanning of that list directly after unbinding gadget from udc. Thanks to this, when we unload first gadget: $ rmmod g_zero.ko gadget which is pending is automatically attached to that UDC (if name matches). Fixes: 855ed04a ("usb: gadget: udc-core: independent registration of gadgets and gadget drivers") Signed-off-by:
-
William wu authored
commit 5de4e1ea upstream. The commit 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") move add hcd to the end of probe, this cause hcc_params uninitiated, because xHCI driver sets hcc_params in xhci_gen_setup() called from usb_add_hcd(). This patch checks the Maximum Primary Stream Array Size in the hcc_params register after add primary hcd. Signed-off-by:
William wu <william.wu@rock-chips.com> Acked-by:
Roger Quadros <rogerq@ti.com> Fixes: 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") Signed-off-by:
-
Felipe Balbi authored
commit ffb80fc6 upstream. At least macOS seems to be sending ClearFeature(ENDPOINT_HALT) to endpoints which aren't Halted. This makes DWC3's CLEARSTALL command time out which causes several issues for the driver. Instead, let's just return 0 and bail out early. Signed-off-by:
-
Alexandre Bailon authored
commit a994ce2d upstream. DA8xx driver is registering and using the CPPI 3.0 DMA controller but actually, the DA8xx has a CPPI 4.1 DMA controller. Remove the CPPI 3.0 quirk and methods. Fixes: f8e9f34f ("usb: musb: Fix up DMA related macros") Fixes: 7f6283ed ("usb: musb: Set up function pointers for DMA") Signed-off-by:
Alexandre Bailon <abailon@baylibre.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 61cd1b4c upstream. ds2490 driver was doing USB transfers from / to buffers on a stack. This is not permitted and made the driver non-working with vmapped stacks. Since all these transfers are done under the same bus_mutex lock we can simply use shared buffers in a device private structure for two most common of them. While we are at it, let's also fix a comparison between int and size_t in ds9490r_search() which made the driver spin in this function if state register get requests were failing. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Maciej S. Szmigiero authored
commit d2ce4ea1 upstream. Near the beginning of w1_attach_slave_device() we increment a w1 master reference count. Later, when we are going to exit this function without actually attaching a slave device (due to failure of __w1_attach_slave_device()) we need to decrement this reference count back. Signed-off-by:
-
Marc Kleine-Budde authored
commit 7c426313 upstream. The priv->cmd_msg_buffer is allocated in the probe function, but never kfree()ed. This patch converts the kzalloc() to resource-managed kzalloc. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ethan Zonca authored
commit c919a306 upstream. Fixes: 05ca5270 can: gs_usb: add ethtool set_phys_id callback to locate physical device The gs_usb driver is performing USB transfers using buffers allocated on the stack. This causes the driver to not function with vmapped stacks. Instead, allocate memory for the transfer buffers. Signed-off-by:
Ethan Zonca <e@ethanzonca.com> Signed-off-by:
-
Peter Rosin authored
commit 9cf6cdba upstream. Fixes a regression triggered by a change in the layout of struct iio_chan_spec, but the real bug is in the driver which assumed a specific structure layout in the first place. Hint: the two bits were not OR:ed together as implied by the indentation prior to this patch, there was a comma between them, which accidentally moved the ..._SCALE bit to the next structure field. That field was .info_mask_shared_by_type before the _available attributes was added by commit 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") and .info_mask_separate_available afterwards, and the regression happened. info_mask_shared_by_type is actually a better choice than the originally intended info_mask_separate for the ..._SCALE bit since a constant is returned from mpl3115_read_raw for the scale. Using info_mask_shared_by_type also preserves the behavior from before the regression and is therefore less likely to cause other interesting side effects. The above mentioned regression causes an unintended sysfs attibute to show up that is not backed by code, in turn causing the following NULL pointer defererence to happen on access. Segmentation fault Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ecc3c000 [00000000] *pgd=87f91831 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: CPU: 1 PID: 1051 Comm: cat Not tainted 4.10.0-rc5-00009-gffd8858-dirty #3 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: ed54ec00 task.stack: ee2bc000 PC is at 0x0 LR is at iio_read_channel_info_avail+0x40/0x280 pc : [<00000000>] lr : [<c06fbc1c>] psr: a0070013 sp : ee2bdda8 ip : 00000000 fp : ee2bddf4 r10: c0a53c74 r9 : ed79f000 r8 : ee8d1018 r7 : 00001000 r6 : 00000fff r5 : ee8b9a00 r4 : ed79f000 r3 : ee2bddc4 r2 : ee2bddbc r1 : c0a86dcc r0 : ee8d1000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 3cc3c04a DAC: 00000051 Process cat (pid: 1051, stack limit = 0xee2bc210) Stack: (0xee2bdda8 to 0xee2be000) dda0: ee2bddc0 00000002 c016d720 c016d394 ed54ec00 00000000 ddc0: 60070013 ed413780 00000001 edffd480 ee8b9a00 00000fff 00001000 ee8d1018 dde0: ed79f000 c0a53c74 ee2bde0c ee2bddf8 c0513c58 c06fbbe8 edffd480 edffd540 de00: ee2bde3c ee2bde10 c0293474 c0513c40 c02933e4 ee2bde60 00000001 ed413780 de20: 00000001 ed413780 00000000 edffd480 ee2bde4c ee2bde40 c0291d00 c02933f0 de40: ee2bde9c ee2bde50 c024679c c0291ce0 edffd4b0 b6e37000 00020000 ee2bdf78 de60: 00000000 00000000 ed54ec00 ed013200 00000817 c0a111fc edffd540 ed413780 de80: b6e37000 00020000 00020000 ee2bdf78 ee2bded4 ee2bdea0 c0292890 c0246604 dea0: c0117940 c016ba50 00000025 c0a111fc b6e37000 ed413780 ee2bdf78 00020000 dec0: ee2bc000 b6e37000 ee2bdf44 ee2bded8 c021d158 c0292770 c0117764 b6e36004 dee0: c0f0d7c4 ee2bdfb0 b6f89228 00021008 ee2bdfac ee2bdf00 c0101374 c0117770 df00: 00000000 00000000 ee2bc000 00000000 ee2bdf34 ee2bdf20 c016ba04 c0171080 df20: 00000000 00020000 ed413780 b6e37000 00000000 ee2bdf78 ee2bdf74 ee2bdf48 df40: c021e7a0 c021d130 c023e300 c023e280 ee2bdf74 00000000 00000000 ed413780 df60: ed413780 00020000 ee2bdfa4 ee2bdf78 c021e870 c021e71c 00000000 00000000 df80: 00020000 00020000 b6e37000 00000003 c0108084 00000000 00000000 ee2bdfa8 dfa0: c0107ee0 c021e838 00020000 00020000 00000003 b6e37000 00020000 0001a2b4 dfc0: 00020000 00020000 b6e37000 00000003 7fffe000 00000000 00000000 00020000 dfe0: 00000000 be98eb4c 0000c740 b6f1985c 60070010 00000003 00000000 00000000 Backtrace: [<c06fbbdc>] (iio_read_channel_info_avail) from [<c0513c58>] (dev_attr_show+0x24/0x50) r10:c0a53c74 r9:ed79f000 r8:ee8d1018 r7:00001000 r6:00000fff r5:ee8b9a00 r4:edffd480 [<c0513c34>] (dev_attr_show) from [<c0293474>] (sysfs_kf_seq_show+0x90/0x110) r5:edffd540 r4:edffd480 [<c02933e4>] (sysfs_kf_seq_show) from [<c0291d00>] (kernfs_seq_show+0x2c/0x30) r10:edffd480 r9:00000000 r8:ed413780 r7:00000001 r6:ed413780 r5:00000001 r4:ee2bde60 r3:c02933e4 [<c0291cd4>] (kernfs_seq_show) from [<c024679c>] (seq_read+0x1a4/0x4e0) [<c02465f8>] (seq_read) from [<c0292890>] (kernfs_fop_read+0x12c/0x1cc) r10:ee2bdf78 r9:00020000 r8:00020000 r7:b6e37000 r6:ed413780 r5:edffd540 r4:c0a111fc [<c0292764>] (kernfs_fop_read) from [<c021d158>] (__vfs_read+0x34/0x118) r10:b6e37000 r9:ee2bc000 r8:00020000 r7:ee2bdf78 r6:ed413780 r5:b6e37000 r4:c0a111fc [<c021d124>] (__vfs_read) from [<c021e7a0>] (vfs_read+0x90/0x11c) r8:ee2bdf78 r7:00000000 r6:b6e37000 r5:ed413780 r4:00020000 [<c021e710>] (vfs_read) from [<c021e870>] (SyS_read+0x44/0x90) r8:00020000 r7:ed413780 r6:ed413780 r5:00000000 r4:00000000 [<c021e82c>] (SyS_read) from [<c0107ee0>] (ret_fast_syscall+0x0/0x1c) r10:00000000 r8:c0108084 r7:00000003 r6:b6e37000 r5:00020000 r4:00020000 Code: bad PC value ---[ end trace 9c4938ccd0389004 ]--- Fixes: cc26ad45 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver") Fixes: 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") Reported-by:
Ken Lin <ken.lin@advantech.com> Tested-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Peter Rosin authored
commit 6a6e1d56 upstream. Fixes a regression triggered by a change in the layout of struct iio_chan_spec, but the real bug is in the driver which assumed a specific structure layout in the first place. Hint: the three bits were not OR:ed together as implied by the indentation prior to this patch, there was a comma between the first two, which accidentally moved the ..._SCALE and ..._OFFSET bits to the next structure field. That field was .info_mask_shared_by_type before the _available attributes was added by commit 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") and .info_mask_separate_available afterwards, and the regression happened. info_mask_shared_by_type is actually a better choice than the originally intended info_mask_separate for the ..._SCALE and ..._OFFSET bits since a constant is returned from mpl115_read_raw for the scale/offset. Using info_mask_shared_by_type also preserves the behavior from before the regression and is therefore less likely to cause other interesting side effects. The above mentioned regression causes unintended sysfs attibutes to show up that are not backed by code, in turn causing a NULL pointer defererence to happen on access. Fixes: 3017d90e ("iio: Add Freescale MPL115A2 pressure / temperature sensor driver") Fixes: 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") Signed-off-by:
-
Mark Rutland authored
commit d81bbe6d upstream. This reverts commit 0bfc445d. When we change the permissions of regions mapped using contiguous entries, the architecture requires us to follow a Break-Before-Make strategy, breaking *all* associated entries before we can change any of the following properties from the entries: - presence of the contiguous bit - output address - attributes - permissiones Failure to do so can result in a number of problems (e.g. TLB conflict aborts and/or erroneous results from TLB lookups). See ARM DDI 0487A.k_iss10775, "Misprogramming of the Contiguous bit", page D4-1762. We do not take this into account when altering the permissions of kernel segments in mark_rodata_ro(), where we change the permissions of live contiguous entires one-by-one, leaving them transiently inconsistent. This has been observed to result in failures on some fast model configurations. Unfortunately, we cannot follow Break-Before-Make here as we'd have to unmap kernel text and data used to perform the sequence. For the timebeing, revert commit 0bfc445d so as to avoid issues resulting from this misuse of the contiguous bit. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <Will.Deacon@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Shanker Donthineni authored
commit 0bdbf3b0 upstream. The IRQFD framework calls the architecture dependent function twice if the corresponding GSI type is edge triggered. For ARM, the function kvm_set_msi() is getting called twice whenever the IRQFD receives the event signal. The rest of the code path is trying to inject the MSI without any validation checks. No need to call the function vgic_its_inject_msi() second time to avoid an unnecessary overhead in IRQ queue logic. It also avoids the possibility of VM seeing the MSI twice. Simple fix, return -1 if the argument 'level' value is zero. Reviewed-by:
Eric Auger <eric.auger@redhat.com> Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Mark Rutland authored
commit 7d0928f1 upstream. Since it was introduced in commit da8d02d1 ("arm64/capabilities: Make use of system wide safe value"), __raw_read_system_reg() has erroneously mapped some sysreg IDs to other registers. For the fields in ID_ISAR5_EL1, our local feature detection will be erroneous. We may spuriously detect that a feature is uniformly supported, or may fail to detect when it actually is, meaning some compat hwcaps may be erroneous (or not enforced upon hotplug). This patch corrects the erroneous entries. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Robin Murphy authored
commit adbe7e26 upstream. When bypassing SWIOTLB on small-memory systems, we need to avoid calling into swiotlb_dma_mapping_error() in exactly the same way as we avoid swiotlb_dma_supported(), because the former also relies on SWIOTLB state being initialised. Under the assumptions for which we skip SWIOTLB, dma_map_{single,page}() will only ever return the DMA-offset-adjusted physical address of the page passed in, thus we can report success unconditionally. Fixes: b67a8b29 ("arm64: mm: only initialize swiotlb when necessary") CC: Jisheng Zhang <jszhang@marvell.com> Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 8f36ebaf upstream. When we fault in a page, we flush it to the PoC (Point of Coherency) if the faulting vcpu has its own caches off, so that it can observe the page we just brought it. But if the vcpu has its caches on, we skip that step. Bad things happen when *another* vcpu tries to access that page with its own caches disabled. At that point, there is no garantee that the data has made it to the PoC, and we access stale data. The obvious fix is to always flush to PoC when a page is faulted in, no matter what the state of the vcpu is. Fixes: 2d58b733 ("arm64: KVM: force cache clean on page fault when caches are off") Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Dave Hansen authored
commit 58ab9a08 upstream. Kirill reported a warning from UBSAN about undefined behavior when using protection keys. He is running on hardware that actually has support for it, which is not widely available. The warning triggers because of very large shifts of integers when doing a pkey_free() of a large, invalid value. This happens because we never check that the pkey "fits" into the mm_pkey_allocation_map(). I do not believe there is any danger here of anything bad happening other than some aliasing issues where somebody could do: pkey_free(35); and the kernel would effectively execute: pkey_free(8); While this might be confusing to an app that was doing something stupid, it has to do something stupid and the effects are limited to the app shooting itself in the foot. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-kselftest@vger.kernel.org Cc: shuah@kernel.org Cc: kirill.shutemov@linux.intel.com Link: http://lkml.kernel.org/r/20170223222603.A022ED65@viggo.jf.intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Miklos Szeredi authored
commit 2e38bea9 upstream. fuse_file_put() was missing the "force" flag for the RELEASE request when sending synchronously (fuseblk). If this flag is not set, then a sync request may be interrupted before it is dequeued by the userspace filesystem. In this case the OPEN won't be balanced with a RELEASE. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 5a18ec17 ("fuse: fix hang of single threaded fuseblk filesystem") Signed-off-by:
-
Paulo Flabiano Smorigo authored
commit 5839f555 upstream. Signed-off-by:
Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Paulo Flabiano Smorigo authored
commit c96d0a1c upstream. Signed-off-by:
-
Herbert Xu authored
commit 016df0ab upstream. This patch adds crypto_requires_off which is an extension of crypto_requires_sync for similar bits such as NEED_FALLBACK. Suggested-by:
Marcelo Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
Herbert Xu authored
commit 89027579 upstream. When we're used as a fallback algorithm, we should propagate the NEED_FALLBACK bit when searching for the underlying ECB mode. This just happens to fix a hang too because otherwise the search may end up loading the same module that triggered this XTS creation. Fixes: f1c131b4 ("crypto: xts - Convert to skcipher") Reported-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
-
