- 21 Aug, 2019 5 commits
-
-
Jani Nikula authored
Split struct declaration and array definition. Fix indents and whitespace. No functional changes. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820134019.13229-4-jani.nikula@intel.com
-
Jani Nikula authored
It's static const data, make it so. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Jani Nikula authored
Everything seems to be all right, but shadowing is to be avoided. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Jani Nikula authored
Split struct declaration and array definition. Fix indents and whitespace. No functional changes. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Chris Wilson authored
When inserting the final level PTE, we check that we are not overflowing the page table (checking that pt_used does not exceed the size of the table). However, we have to allow for every other PTE to be pinned by a simultaneous removal thread (as on remove we bump the pt_used counter before adjusting the table). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821042044.7354-1-chris@chris-wilson.co.uk
-
- 20 Aug, 2019 19 commits
-
-
Ville Syrjälä authored
Each fake MST encoder is tied to a specific pipe. Fix the encoder's crtc_mask to reflect that fact. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-16-lucas.demarchi@intel.com
-
Lucas De Marchi authored
2 important fixes: - vblank counter is now working - PSR1 is working Cc: Jose Souza <jose.souza@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-5-lucas.demarchi@intel.com
-
José Roberto de Souza authored
When trying to read registers from transcoder C and D while PG3 is ON it causes unclaimed access warnings. Adding the powerwells for the pipes fixes the issue, but doesn't match the spec. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-4-lucas.demarchi@intel.com
-
Michel Thierry authored
There are no changes with respect to GEN11, which Paulo wrote. This gets rid of the "Missing switch case in read_timestamp_frequency" message at boot for Tiger Lake. [ Lucas: BSpec: 10742 and 9024, but there's a mismatch on the values. Let's say a glitch in the spec. Tested locally and it works. ] Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Reviewed-by:
-
Lucas De Marchi authored
The current SKUs added for Tiger Lake don't have DDIC hooked up, even though it is supported by the SoC. The current state for these SKUs is problematic since while enabling the combo phy, PORT_COMP_DW* return 0xFFFFFFFF, which is invalid per register definition. During initialization we check what phys are not yet enabled by reading PHY_MISC_C and try to enable it by toggling the "DE to IO Comp Pwr Down" bit. But after that any read to the PORT_COMP_DW* returns invalid results. This removes the following warning [56997.634353] Missing case (val == 4294967295) [56997.639241] WARNING: CPU: 5 PID: 768 at drivers/gpu/drm/i915/display/intel_combo_phy.c:54 cnl_get_procmon_ref_values+0xc9/0xf0 [i915] [56997.639808] Modules linked in: i915(+) prime_numbers x86_pkg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e [last unloaded: prime_numbers] [56997.639808] CPU: 5 PID: 768 Comm: insmod Tainted: G U W 5.2.0-demarchi+ #65 [56997.639808] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2252.A03.1906270154 06/27/2019 [56997.639808] RIP: 0010:cnl_get_procmon_ref_values+0xc9/0xf0 [i915] [56997.639808] Code: 2c a0 85 c9 74 e0 81 f9 00 00 00 01 75 09 48 c7 c0 0c a4 2c a0 eb cf 48 c7 c6 3c 3a 31 a0 48 c7 c7 40 3a 31 a0 e8 6b 4d ea e0 <0f> 0b 48 c7 c0 00 a4 2c a0 eb b1 48 c7 c0 24 a4 2 c a0 eb a8 e8 be [56997.639808] RSP: 0018:ffffc9000068f8a8 EFLAGS: 00010286 [56997.639808] RAX: 0000000000000000 RBX: ffff88848fa90000 RCX: 0000000000000000 [56997.639808] RDX: ffff8884a08b5ef8 RSI: ffff8884a08a6658 RDI: 00000000ffffffff [56997.639808] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 [56997.639808] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848fa90000 [56997.639808] R13: 0000000000000000 R14: 0000000000000002 R15: 0006c00000162000 [56997.639808] FS: 00007f61ca3d12c0(0000) GS:ffff8884a0880000(0000) knlGS:0000000000000000 [56997.639808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56997.639808] CR2: 00007f71be6a92c0 CR3: 0000000494750006 CR4: 0000000000760ee0 [56997.639808] PKRU: 55555554 [56997.639808] Call Trace: [56997.639808] cnl_verify_procmon_ref_values+0x36/0xf0 [i915] [56997.639808] ? rcu_read_lock_sched_held+0x6f/0x80 [56997.639808] ? gen11_fwtable_read32+0x257/0x290 [i915] [56997.639808] icl_combo_phy_verify_state.part.0+0x22/0xa0 [i915] [56997.639808] intel_combo_phy_init+0x17e/0x3e0 [i915] [56997.639808] ? icl_display_core_init+0x2c/0x1a0 [i915] [56997.639808] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [56997.639808] icl_display_core_init+0x34/0x1a0 [i915] [56997.639808] intel_power_domains_init_hw+0x200/0x570 [i915] [56997.639808] i915_driver_probe+0x103b/0x17e0 [i915] [56997.639808] ? printk+0x53/0x6a [56997.639808] i915_pci_probe+0x3b/0x190 [i915] We may or may not need to change the implementation to account for DDIC being available on other SKUs. For now I think the best thing to do is to just disable the port. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814235517.10032-1-lucas.demarchi@intel.com
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
The current assertion tries to make sure that we do not over count the number of used PDE inside a page directory -- that is with an array of 512 pde, we do not expect more than 512 elements used! However, our assertion has to take into account that as we pin an element into the page directory, the caller first pins the page directory so the usage count is one higher. However, this should be one extra pin per thread, and the upper bound is that we may have one thread for each entry. Signed-off-by:
-
Daniele Ceraolo Spurio authored
This is only required for a single platform so no need to reserve the memory on all of them. This removes the last direct dependency of i915_drv.h on i915_reg.h (apart from the i915_reg_t definition). v2: drop unneeded diff, keep the vlv prefix, call functions unconditionally (Jani), fwd declaration of the struct (Chris) Signed-off-by:Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniele Ceraolo Spurio authored
Re-use Gen11 context size for now. [ Lucas: this is a temporary enabling patch that needs to be confirmed: we need to check BSpec 46255 and recompute ] Signed-off-by: -
Michel Thierry authored
Gen12 removes the target-cache and age fields from the private PAT because MOCS now have the capability to set these itself. Only memory-type field should be programmed in the ppat, the reminded bits are reserved. Since now there are only 4 possible combinations, we could set only 4 PPAT and leave the reminded 4 as UC, but I left them as WB as we used to have before. Also these registers have been relocated to the 0x4800-0x481c range. HSDES: 1406402661 BSpec: 31654 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Add empty workaround hooks for Tiger Lake. The workarounds will be added on separate patches. We were already applying WaRsForcewakeAddDelayForAck, which is indeed still valid, so also update the comment. Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
The CSB format has been reworked for Gen12 to include information on both the context we're switching away from and the context we're switching to. After the change, some of the events don't have their own bit anymore and need to be inferred from other values in the csb. One of the context IDs (0x7FF) has also been reserved to indicate the invalid ctx, i.e. engine idle. Note that the full context ID includes the SW counter as well, but since we currently only care if the context is valid or not we can ignore that part. v2: fix mask size, fix and expand comments (Tvrtko), use if-ladder (Chris) Bspec: 45555, 46144 Signed-off-by: -
Daniele Ceraolo Spurio authored
Like Gen11, Gen12 has 11 available bits for the ctx id field. However, the last value (0x7FF) is reserved to indicate engine idle, so we need to reduce the maximum number of contexts by 1 compared to Gen11. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Gen12 uses a new indirect ctx offset. Bspec: 11740 Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Michel Thierry authored
In Gen11, only even numbered "logical" VDBoxes are hooked up to a SFC (Scaler & Format Converter) unit. This is not the case in Tigerlake, where each VDBox can access a SFC. We will use this information to decide when the SFC units need to be reset and also pass it to the GuC. Bspec: 48077 Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Chris Wilson authored
Before we acquire the vma for GPU activity, ensure that the underlying object is not already in the process of being freed. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820100531.8430-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently, we remove the from per-file request list for throttling and retirement under a dedicated spinlock, but insertion is governed by struct_mutex. This needs to be the same lock so that the retirement/insertion of neighbouring requests (at the tail) doesn't break the list. Signed-off-by:
-
Imre Deak authored
To work around a DMC/Punit issue on ICL where the driver's ICL_PORT_COMP_DW8/IREFGEN PHY setting is lost when entering/exiting DC6 state, make sure to reinit the PHY whenever disabling DC states. Similarly the driver's PHY/DBUF/CDCLK settings should have been preserved across DC5/6 transitions, so check this on all platforms. This gets rid of the following WARN during suspend: Combo PHY A HW state changed unexpectedly Signed-off-by:
-
Imre Deak authored
The conversion during HDMI HW readout from port_clock to crtc_clock was missed when HDMI 10bpc support was added, so fix that. v2: - Unscrew the non-HDMI case. Fixes: cd9e11a8 ("drm/i915/icl: Add 10-bit support for hdmi") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109593 Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 19 Aug, 2019 8 commits
-
-
Chris Wilson authored
Inside gtt_restore_mappings() we currently take the obj->resv->lock, but in the future we need to avoid taking this fs-reclaim tainted lock as we need to extend the coverage of the vm->mutex. Take advantage of the single-threaded nature of the early resume phase, and do a single wbinvd() to flush all the GTT objects en masse. Signed-off-by:
-
Chris Wilson authored
Since commit 078dec33 ("dma-buf: add dma_fence_get_stub") the 0 fence context became an impossible match as it is used for an always signaled fence. We can simplify our timeline tracking by knowing that 0 always means no match. Signed-off-by:
-
Chris Wilson authored
Check that i915_active.retire() exists before calling. Signed-off-by:
-
Matt Roper authored
Our pin mapping tables for ICP and MCC currently only list the standard GPIO pins used for various output ports. Even through ICP's standard pin usage only utilizes pins 1, 2, and 9-12, and MCC's standard pin usage only uses pins 1, 2, and 9, these platforms do still have GPIO registers to address pins in the range 1-3 and 9-14. OEM's may remap GPIO usage in non-standard ways (and provide the actual mapping via VBT settings), so we shouldn't exclude pins on these platforms just because they aren't part of the standard mappings. TGP's standard pin tables contains all the possible pins, so let's rename them to "icp" and use them for all PCH >= PCH_ICP. This will prevent intel_gmbus_is_valid_pin from rejecting non-standard pin usage that an OEM specifies via the VBT. Note that this will cause pin 9 to be labeled as "tc1" instead of "dpc" in debug messages on platforms with the MCC PCH, but that may actually help avoid confusion since the text strings will now be the same on all gen11+ platforms instead of being different on just EHL. v2: Drop now-unused MCC_DDC_BUS_DDI_* names. v3: We want to compare against INTEL_PCH_TYPE, not INTEL_PCH_ID. Bspec: 8417 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Chris Wilson authored
Make sure that when submitting requests, we always serialize against potential vma moves and clflushes. Time for a i915_request_await_vma() interface! Signed-off-by:
-
Chris Wilson authored
Use a locked xchg to ensure that the global log message giving instructions on how to send a bug report is emitted precisely once. Signed-off-by:
-
Chris Wilson authored
We use a fake timeline->mutex lock to reassure lockdep that the timeline is always locked when emitting requests. However, the use inside __engine_park() may be inside hardirq and so lockdep now complains about the mixed irq-state of the nested locked. Disable irqs around the lockdep tracking to keep it happy. Fixes: 6c69a454 ("drm/i915/gt: Mark context->active_count as protected by timeline->mutex") Signed-off-by:
-
Chris Wilson authored
We were passing in an unwrapped offset into intel_ring_reset() on unpinning. Sooner or later that had to land on ring->size. <3> [314.872147] intel_ring_reset:1237 GEM_BUG_ON(!intel_ring_offset_valid(ring, tail)) <4> [314.872272] ------------[ cut here ]------------ <2> [314.872276] kernel BUG at drivers/gpu/drm/i915/gt/intel_ringbuffer.c:1237! <4> [314.872320] invalid opcode: 0000 [#1] PREEMPT SMP PTI <4> [314.872331] CPU: 1 PID: 3466 Comm: i915_selftest Tainted: G U 5.3.0-rc4-CI-Patchwork_14061+ #1 <4> [314.872346] Hardware name: Hewlett-Packard HP Compaq 8000 Elite CMT PC/3647h, BIOS 786G7 v01.02 10/22/2009 <4> [314.872477] RIP: 0010:intel_ring_reset+0x51/0x70 [i915] <4> [314.872487] Code: 9e db 51 e0 48 8b 35 b6 c7 22 00 49 c7 c0 f8 d9 d6 a0 b9 d5 04 00 00 48 c7 c2 70 5b d4 a0 48 c7 c7 6c fc c0 a0 e8 cf be 58 e0 <0f> 0b 89 77 20 89 77 1c 89 77 24 e9 4f ed ff ff 0f 1f 44 00 00 66 <4> [314.872512] RSP: 0018:ffffc9000034fa98 EFLAGS: 00010282 <4> [314.872523] RAX: 0000000000000010 RBX: ffff8881019412c8 RCX: 0000000000000000 <4> [314.872534] RDX: 0000000000000001 RSI: 0000000000000008 RDI: 0000000000000f20 <4> [314.872545] RBP: ffff888104e0f740 R08: 0000000000000000 R09: 0000000000000f20 <4> [314.872557] R10: 0000000000000000 R11: ffff888117094518 R12: ffffffffa0d3d2c0 <4> [314.872569] R13: ffffffffa0e2a250 R14: ffffffffa0e2a1e0 R15: ffffc9000034fe88 <4> [314.872581] FS: 00007fe6d49f6e40(0000) GS:ffff888117a80000(0000) knlGS:0000000000000000 <4> [314.872595] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [314.872605] CR2: 000055e3283e9cc8 CR3: 0000000108842000 CR4: 00000000000406e0 <4> [314.872616] Call Trace: <4> [314.872701] intel_ring_unpin+0x1a/0x220 [i915] <4> [314.872787] ring_destroy+0x48/0xc0 [i915] <4> [314.872870] intel_engines_cleanup+0x24/0x40 [i915] <4> [314.872964] i915_gem_driver_release+0x1b/0xf0 [i915] <4> [314.872984] i915_driver_release+0x1c/0x80 [i915] Signed-off-by:
-
- 18 Aug, 2019 4 commits
-
-
Chris Wilson authored
Errors spread like wildfire, and must eventually be returned to the user. They need to be captured and passed along the flow of fences, infecting each in turn with the existing error, until finally they fall out of a user visible result. Signed-off-by:
-
Michal Wajdeczko authored
There is no need to mark whole GPU as wedged just because of the custom HuC fw failure as users can always verify actual HuC firmware status using existing HUC_STATUS ioctl. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Michal Wajdeczko authored
If we failed to fetch default GuC firmware and we didn't plan to use it for the submission and we never have used GuC before then we may continue normal driver load, no need to declare GPU wedged (we can use execlist for submission) and it is safe to run without the HuC (users will check HuC status anyway). Signed-off-by:
-
Michal Wajdeczko authored
As we plan to continue driver load after GuC initialization failure, we can't assume that GuC log data will be available just because GuC was initially enabled. We must check that GuC is still running instead. Signed-off-by:
-
- 17 Aug, 2019 4 commits
-
-
Michal Wajdeczko authored
Let's wait with decision about importance of uC failure to hardware initialization step. Signed-off-by:
-
Michal Wajdeczko authored
Be consistent and always perform fw fetch cleanup in GuC/HuC specific init functions on every failure. Also while converting firmware status to error, stop treating SELECTED as non-error, as long term we should not see it. Signed-off-by:
-
Michal Wajdeczko authored
We can rely on firmware status AVAILABLE to determine if any firmware cleanup is required. Also don't unconditionally reset fw status to SELECTED as we will loose MISSING/ERROR codes. Signed-off-by:
-
Chris Wilson authored
Add a redzone to our context image and check the HW does not write into after a context save, to verify that we have the correct context size. (This does vary with feature bits, so test with a live setup that should match how we run userspace.) v2: Check the redzone on every context unpin v3: Use a kernel context to prevent loading garbage for ringbuffer submission Signed-off-by:
-
