- 04 Sep, 2017 39 commits
-
-
Subash Abhinov Kasiviswanathan authored
Data format can be directly set from rmnet_newlink() since the rmnet real dev info is already available. Since __rmnet_get_real_dev_info() is no longer used in rmnet_config.c after removal of those functions, move content to rmnet_get_real_dev_info(). __rmnet_set_endpoint_config() is collapsed into rmnet_set_endpoint_config() since only mux_id was being set additionally within it. Remove an unnecessary mux_id check. Set the mux_id for the rmnet_dev within rmnet_vnd_newlink() itself. Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
The current log is not very useful as it does not log the device name since it it is prior to registration - (unnamed net_device) (uninitialized): Setting up device Modify to log after the device registration - rmnet1: rmnet dev created Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
This was used only in the original patch series where the IOCTLs were present and is no longer in use. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
rmnet_rtnl_validate() was checking for upto mux_id 254, however the rmnet_devices devices could hold upto 32 entries only. Fix this by increasing the size of the rmnet_devices. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: refactor app init, and minor flower fixes This series is a part 2 to what went into net as a simpler fix. In net we simply moved when existing callbacks are invoked to ensure flower app does not still use representors when lower netdev has already been destroyed. In this series we add a callback to notify apps when vNIC netdevs are fully initialized and they are about to be destroyed. This allows flower to spawn representors at the right time, while keeping the start/stop callbacks for what they are intended to be used - FW initialization over control channel. Patch 4 improves drop monitor interaction and patch 5 changes the default Kconfig selection of flower offload. Patch 6 fixes locking around representor updates which got lost in net-next. ==================== Signed-off-by: -
Jakub Kicinski authored
When we moved to updating representors from a workqueue grabbing the RTNL somehow got lost in the process. Restore it, and make sure RCU lock is not held while we are grabbing the RTNL. RCU protects the representor table, so since we will be under RTNL we can drop RCU lock as soon as we find the netdev pointer. RTNL is needed for the dev_set_mtu() call. Fixes: 2dff1962 ("nfp: process MTU updates from firmware flower app") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
It's reasonable to assume that if user selects to build the NFP driver all offload capabilities will be enabled by default. Change the CONFIG_NFP_APP_FLOWER to default to enabled. Signed-off-by:
-
Jakub Kicinski authored
Use dev_consume_skb_any() in place of dev_kfree_skb_any() when control frame has been successfully processed in flower and on the driver's main TX completion path. Signed-off-by:
-
Jakub Kicinski authored
Since representors are now created with a separate callback start/stop app callbacks can be moved again to their original location. They are intended to app-specific init/clean up over the control channel. Signed-off-by:
-
Jakub Kicinski authored
Create representors after lower vNIC is registered and destroy them before it is destroyed. Move the code out of start/stop callbacks directly into vnic_init/clean callbacks. Make sure SR-IOV callbacks don't try to create representors when lower device does not exist. Signed-off-by:
-
Jakub Kicinski authored
We currently only have one app callback for vNIC creation and destruction. This is insufficient, because some actions have to be taken before netdev is registered, after it's registered and after it's unregistered. Old callbacks were really corresponding to alloc/free actions. Rename them and add proper init/clean. Apps using representors will be able to use new callbacks to manage lifetime of upper devices. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2017-09-03 This series from Tariq includes micro data path optimization for mlx5e netdevice driver. Mainly Tariq introduces the following changes to NAPI and RX handling path of the driver: - RX ring structure reorganizing - Trivial code refactoring and optimization - NAPI busy-poll for when fast UMR is in progress - Non-atomic state operations in NAPI context - Remove unnecessary fields from fast path structures - page-cache micro optimization - Rely on NAPI to avoid missing an IRQ for RX/TX shared NAPI contexts - Stop NAPI when irq changes affinity - Distribute RSS table among all RX rings ==================== Signed-off-by: -
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Offloading GRE tunnels Petr says: This patch series introduces to mlxsw driver support for offloading IP-in-IP tunnels in general, and for (subset of) GRE in particular. This patchset supports two ways of configuring GRE: - So called "hierarchical configuration", where the GRE device has a bound dummy device, which is in a different VRF. The VRF with host traffic is called "overlay", the one with encapsulated traffic is called "underlay". - So called "flat configuration", where the GRE device doesn't have a bound device, and overlay and underlay are both in the same VRF (possibly the default one). Two routes are then interesting: a route that directs traffic to a GRE device (which would typically be in overlay VRF, but could be in another one), and a local route for the tunnel's local address (in underlay). Handling of these two route types is then introduced as patches to support, respectively, IPv4 and IPv6 encapsulation and IPv4 decapsulation. The encap and decap routes then reference a loopback device, a new type of RIF introduced by this patchset for the specific use of offloading tunnels. The encap and decap code is abstract with respect to the particulars of individual L3 tunnel types. This patchset introduces support for GRE tunnels in particular. Limitations: - Each tunnel needs to have a different local address (within a given VRF). When two tunnels are used that are in conflict, FIB abort is triggered and the driver ceases offloading FIBs. Full handling of such configurations needs special setup in the hardware, such that the tunnels that share an address are dispatched correctly according to their key (or lack thereof). That's currently not implemented, and to keep things deterministic, the driver triggers FIB abort. - A next hop that uses an incompletely-specified tunnel (e.g. such that are used for LWT) is not offloaded, but doesn't trigger FIB abort like the above. If such routes end up being in a de facto conflict with other tunnels, then if there already is an offload for that address, the traffic for the conflicting tunnel will end up mismatching the configuration of the offloaded tunnel, and thus gets to slow path through an error trap. - GRE checksumming and sequence numbers are not supported and TTL and TOS need to be set to inherit. Tunnels with a different configuration are not offloaded and their traffic is trapping to slow path. Note in particular that TOS of inherit is not the default configuration and needs to be explicitly specified when the tunnel is created. - The only feature that is not graciously handled is that if a change is made to the tunnel, e.g. through "ip tunnel change", such changes are not reflected in the driver. There is currently no notification mechanism for these changes. Introduction of this mechanism and its leverage in the driver will be subject of follow-up work. For now this limitation can be worked around by removing and re-adding the encap route. --- v1->v2: -fix order of patch 5 ==================== Signed-off-by: -
Petr Machata authored
This patch introduces callbacks and tunnel type to offload GRE tunnels. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Petr Machata authored
struct mlxsw_sp_rif is a router-private structure, and therefore everything related to it is as well: parameters, and derived RIF types including loopbacks. IPIP module needs access to some details of loopback interfaces, but exporting all the RIF shebang would create too large an interface. So instead export just the bare minimum necessary: accessors for RIF index and underlay VRF ID. Signed-off-by:
-
Petr Machata authored
These traps are generated for packets that fail checks for source IP, encapsulation type, or GRE key. Trap these packets to CPU for follow-up handling by the kernel, which will send ICMP destination unreachable responses. Signed-off-by:
-
Petr Machata authored
The local route that points at IPIP's underlay device (decap route) can be present long before the GRE device. Thus when an encap route is added, it's necessary to look inside the underlay FIB if the decap route is already present. If so, the current trap offload needs to be withdrawn and replaced with a decap offload. Signed-off-by:
-
Petr Machata authored
Unlike encapsulation, which is represented by a next hop forwarding to an IPIP tunnel, decapsulation is a type of local route. It is created for local routes whose prefix corresponds to the local address of one of offloaded IPIP tunnels. When the tunnel is removed (i.e. all the encap next hops are removed), the decap offload is migrated back to a trap for resolution in slow path. This patch assumes that decap route is already present when encap route is added. A follow-up patch will fix this issue. Note that this patch only supports IPv4 underlay. Support for IPv6 underlay will be subject to follow-up work apart from this patchset. Signed-off-by:
-
Petr Machata authored
Add the missing bits to recognize IPv6 next hops as IPIP ones to enable offloading of IPv6 overlay encapsulation. Signed-off-by:
-
Petr Machata authored
This introduces some common code for tracking of offloaded IP-in-IP tunnels, and support for offloading IPv4 overlay encapsulating routes in particular. A follow-up patch will introduce IPv6 overlay as well. Offloaded tunnels are kept in a linked list of mlxsw_sp_ipip_entry objects hooked up in mlxsw_sp_router. A network device that represents the tunnel is used as a key to look up the corresponding IPIP entry. Note that in the future, more general keying mechanism will be needed, because parts of the tunnel information can be provided by the route. IPIP entries are reference counted, because several next hops may end up using the same tunnel, and we only want to offload it once. Encapsulation path hooks into next hop handling. Routes that forward to a tunnel are now considered gateway routes, thus giving them the same treatment that other remote routes get. An IPIP next hop type is introduced. Details of individual tunnel types are kept in an array of mlxsw_sp_ipip_ops objects. If a tunnel type doesn't match any of the known tunnel types, the next-hop is not considered an IPIP next hop. The list of IPIP tunnel types is currently empty, follow-up patches will add support for GRE. Traffic to IPIP tunnel types that are not explicitly recognized by the driver traps and is handled in slow path. Signed-off-by:
-
Petr Machata authored
In the router, some next hops may reference an encapsulating netdevice, such as GRE or IPIP. To properly offload these next hops, mlxsw needs to keep track of whether a given next hop is a regular Ethernet entry, or an IP-in-IP tunneling entry. To facilitate this book-keeping, add a type field to struct mlxsw_sp_nexthop. There is, as of this patch, only one next hop type: MLXSW_SP_NEXTHOP_TYPE_ETH. Follow-up patches will introduce the IP-in-IP variant. There are several places where next hops are initialized in the IPv4 path. Instead of replicating the logic at every one of them, factor it out to a function mlxsw_sp_nexthop4_type_init(). The corresponding fini is actually protocol-neutral, so put it to mlxsw_sp_nexthop_type_fini(), but create a corresponding protocoled _fini function that dispatches to the protocol-neutral one. The IPv6 path is simpler, but for symmetry with IPv4, create the same suite of functions with corresponding logic. Signed-off-by:
-
Petr Machata authored
IPv6 counterpart of the previous patch: introduce a function to determine whether a given route is a gateway route. The new function takes a mlxsw_sp argument which follow-up patches will use. Thus mlxsw_sp_fib6_entry_type_set() got that argument as well. Signed-off-by:
-
Petr Machata authored
For IPv4 IP-in-IP offload, routes that direct traffic to IP-in-IP devices need to be considered gateway routes as well. That involves a bit more logic, so extract the current test to a separate function, where the logic can be later added. Signed-off-by:
-
Petr Machata authored
When offloading L3 tunnels, an adjacency entry is created that loops the packet back into the underlay router. Loopback interfaces then hold the corresponding information and are created for IP-in-IP netdevices. Signed-off-by:
-
Petr Machata authored
Loopback RIFs, which will be introduced in a follow-up patch, differ from other RIFs in that they do not have a FID associated with them. To support this, demote FID allocation from mlxsw_sp_rif_create to configure op of the existing RIF types, and likewise the FID release from mlxsw_sp_rif_destroy to deconfigure op. Signed-off-by:
-
Petr Machata authored
Details of individual tunnel types are kept in an array of mlxsw_sp_ipip_ops objects. Follow-up patches will use the list to determine whether a constructed RIF should be a loopback, and to decide whether a next hop references a tunnel. The list is currently empty, follow-up patches will add support for GRE. Signed-off-by:
-
Petr Machata authored
The spectrum_ipip module that will be introduced in the follow-up patches needs to know the data type. Signed-off-by:
-
Petr Machata authored
To support IPIP, the driver needs to be able to construct an IPIP adjacency. Change mlxsw_reg_ratr_pack to take an adjacency type as an argument. Adjust the one existing caller. Signed-off-by:
-
Petr Machata authored
Unlike other interface types, loopback RIFs do not have MAC address. So drop the corresponding argument from mlxsw_reg_ritr_pack() and move it to a new function. Call that from callers of mlxsw_reg_ritr_pack. Signed-off-by:
-
Petr Machata authored
The RTDP register is used for configuring the tunnel decap properties of NVE and IPinIP. Signed-off-by:
-
Petr Machata authored
To implement IP-in-IP decapsulation, Spectrum uses LPM entries of type IP2ME with tunnel validity bit and tunnel pointer set. The necessary register fields are already available, so add a function to pack the RALUE as appropriate. Signed-off-by:
-
Petr Machata authored
This enum is used with reg_ratr_trap_id, so move it next to the register definition. While at it, drop the enumerator initializers. Signed-off-by:
-
Petr Machata authored
So far, adjacencies have always been of type Ethernet (with value of 0), and thus there was no need to explicitly support RATR type. However to support IP-in-IP adjacencies, this type and a suite of IP-in-IP-specific attributes need to be added. Signed-off-by:
-
Petr Machata authored
Update the register so that loopback RIFs can be created and loopback properties specified. Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: mvpp2: improve the mac address retrieval logic This series aims at fixing the logic behind the MAC address retrieval in the PPv2 driver. A possible issue is also fixed in patch 3/3 to introduce fallbacks when the address given in the device tree isn't valid. Thanks! Antoine Since v2: - Patch 1/4 from v2 was applied on net (and net was merged in net-next). - Rebased on net-next. Since v1: - Rebased onto net (was on net-next). ==================== Signed-off-by: -
Antoine Tenart authored
When using a mac address described in the device tree, a check is made to see if it is valid. When it's not, no fallback is defined. This patches tries to get the mac address from h/w (or use a random one if the h/w one isn't valid) when the dt mac address isn't valid. Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by:
-
Antoine Tenart authored
The MAC retrieval logic is using a variable to store an h/w stored mac address and checks this mac against invalid ones before using it. But the mac address is only read from h/w when using PPv2.1. So when using PPv2.2 it defaults to its init state. This patches fixes the logic to only check if the h/w mac is valid when actually retrieving a mac from h/w. Signed-off-by:
-
Antoine Tenart authored
The MAC retrieval has a quite complicated logic (which is broken). Moves it to its own function to prepare for patches fixing its logic, so that reviews are easier. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. Basically, updates to the conntrack core, enhancements for nf_tables, conversion of netfilter hooks from linked list to array to improve memory locality and asorted improvements for the Netfilter codebase. More specifically, they are: 1) Add expection to hashes after timer initialization to prevent access from another CPU that walks on the hashes and calls del_timer(), from Florian Westphal. 2) Don't update nf_tables chain counters from hot path, this is only used by the x_tables compatibility layer. 3) Get rid of nested rcu_read_lock() calls from netfilter hook path. Hooks are always guaranteed to run from rcu read side, so remove nested rcu_read_lock() where possible. Patch from Taehee Yoo. 4) nf_tables new ruleset generation notifications include PID and name of the process that has updated the ruleset, from Phil Sutter. 5) Use skb_header_pointer() from nft_fib, so we can reuse this code from the nf_family netdev family. Patch from Pablo M. Bermudo. 6) Add support for nft_fib in nf_tables netdev family, also from Pablo. 7) Use deferrable workqueue for conntrack garbage collection, to reduce power consumption, from Patch from Subash Abhinov Kasiviswanathan. 8) Add nf_ct_expect_iterate_net() helper and use it. From Florian Westphal. 9) Call nf_ct_unconfirmed_destroy only from cttimeout, from Florian. 10) Drop references on conntrack removal path when skbuffs has escaped via nfqueue, from Florian. 11) Don't queue packets to nfqueue with dying conntrack, from Florian. 12) Constify nf_hook_ops structure, from Florian. 13) Remove neededlessly branch in nf_tables trace code, from Phil Sutter. 14) Add nla_strdup(), from Phil Sutter. 15) Rise nf_tables objects name size up to 255 chars, people want to use DNS names, so increase this according to what RFC 1035 specifies. Patch series from Phil Sutter. 16) Kill nf_conntrack_default_on, it's broken. Default on conntrack hook registration on demand, suggested by Eric Dumazet, patch from Florian. 17) Remove unused variables in compat_copy_entry_from_user both in ip_tables and arp_tables code. Patch from Taehee Yoo. 18) Constify struct nf_conntrack_l4proto, from Julia Lawall. 19) Constify nf_loginfo structure, also from Julia. 20) Use a single rb root in connlimit, from Taehee Yoo. 21) Remove unused netfilter_queue_init() prototype, from Taehee Yoo. 22) Use audit_log() instead of open-coding it, from Geliang Tang. 23) Allow to mangle tcp options via nft_exthdr, from Florian. 24) Allow to fetch TCP MSS from nft_rt, from Florian. This includes a fix for a miscalculation of the minimal length. 25) Simplify branch logic in h323 helper, from Nick Desaulniers. 26) Calculate netlink attribute size for conntrack tuple at compile time, from Florian. 27) Remove protocol name field from nf_conntrack_{l3,l4}proto structure. From Florian. 28) Remove holes in nf_conntrack_l4proto structure, so it becomes smaller. From Florian. 29) Get rid of print_tuple() indirection for /proc conntrack listing. Place all the code in net/netfilter/nf_conntrack_standalone.c. Patch from Florian. 30) Do not built in print_conntrack() if CONFIG_NF_CONNTRACK_PROCFS is off. From Florian. 31) Constify most nf_conntrack_{l3,l4}proto helper functions, from Florian. 32) Fix broken indentation in ebtables extensions, from Colin Ian King. 33) Fix several harmless sparse warning, from Florian. 34) Convert netfilter hook infrastructure to use array for better memory locality, joint work done by Florian and Aaron Conole. Moreover, add some instrumentation to debug this. 35) Batch nf_unregister_net_hooks() calls, to call synchronize_net once per batch, from Florian. 36) Get rid of noisy logging in ICMPv6 conntrack helper, from Florian. 37) Get rid of obsolete NFDEBUG() instrumentation, from Varsha Rao. 38) Remove unused code in the generic protocol tracker, from Davide Caratti. I think I will have material for a second Netfilter batch in my queue if time allow to make it fit in this merge window. ==================== Signed-off-by:
-
- 03 Sep, 2017 1 commit
-
-
Colin Ian King authored
The current allocation for dev->caps.spec_qps is for the size of the pointer and not the size of the actual mlx4_spec_qps structure. Fix this by using the correct size. Also splint allocation over a few lines to make it cppcheck clean on overly wide lines. Detected by CoverityScan, CID#1455222 ("Wrong sizeof argument") Fixes: c73c8b1e ("net/mlx4_core: Dynamically allocate structs at mlx4_slave_cap") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
