- 17 May, 2012 36 commits
-
-
Jeff Skirvin authored
This patch changes the callback mechanism to libsas to only occur while the scic_lock is held; the abort path cleanup of I/Os also checks to make sure IREQ_ABORT_PATH_ACTIVE is clear before proceding. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Completion of I/Os during the one of the abort path interface calls from libsas can drive remote device state changes and the resumption of the device RNC. This is a problem when the abort path is attempting to cleanup outstanding I/O at the same time - the resumption can prevent the termination from occuring correctly. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
In order to prevent a device from receiving an I/O request while still in an RNC suspending or resuming state (and therefore failing that I/O back to libsas with a reset required status) wait for the RNC state change before proceding in the abort path. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
In the libsas error path, SATA disks require extra handling in libata to recover operation. However, libsas expects to be able to immediately recover all outstanding I/O once the error handler escalation stops. This patch fixes the condition where the libata error handler is scheduled for operation but libsas has already deleted the outstanding sas_tasks. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
The LLHANG timer should be enabled once per device. This patch corrects both the timer enable and the timer disable for the remote device. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
In the case of a suspend call while in SCI_RNC_POSTING or INVALIDATING states, the LLHANG detect needed to be saved so the upcoming suspension would enable it correctly. The unused suspend callback parameters were removed. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
This addresses a regression from the commit "isci: Redesign device suspension, abort, cleanup." in which the sas_task end condition for terminated I/Os was made to call back on sas_task_abort()". This commit will be rolled into the original. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
For NCQ error conditions among others, there is no need to enable the link layer hang detect timer. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
The RNC can be any of the states in the loop from suspended to ready when the API "suspend" or "resume" are called. This change adds destination states parameters that control the suspension / resumption action of the RNC statemachine for those transition states. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
This commit changes the means by which outstanding I/Os are handled for cleanup. The likelihood is that this commit will be broken into smaller pieces, however that will be a later revision. Among the changes: - All completion structures have been removed from the tmf and abort paths. - Now using one completed I/O list, with the I/O completed in host bit being used to select error or normal callback paths. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
If LUN reset sees that the device is gone, it returns TMF_RESP_FUNC_FAILED to cause libsas to escalate to an I_T_Nexus_Reset. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Fixing the remote device state machine to suspend and terminate all outstanding I/O before the device stopped state is reached. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
When the remote device enters the NCQ error state, the device must be suspended so that the I/O terminations can take place. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
TCs must be terminated only while the RNC is suspended. This commit adds remote device suspensions and resumptions in the abort, reset and termination paths. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
TCs must only be terminated when RNCs are suspended. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
Add comprehensive decode for all TC completions that generate RNC suspensions. Note that this commit also removes unconditional resumptions of ATAPI devices when in the SCI_STP_DEV_ATAPI_ERROR state, and STP devices when in the SCI_STP_DEV_IDLE state. This is because the SCI_STP_DEV_IDLE and SCI_STP_DEV_ATAPI state entry functions manage the RNC resumption. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
The resumption from the Tx/Rx suspended state should work the same as the Tx suspended state. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jeff Skirvin authored
For STP devices under certain protocol conditions, an RNC will not suspend until the current transfer state is broken with a SYNC/ESC sequence from the SCU. The SYNC/ESC driven by expiration of the SCU link layer hang detect timer, which has too small a dynamic range to support slow SATA devices, so normally it is disabled. This change enables the timer with the minimum period at the point when the suspension is requested. Note that there is potential collateral damage to other open connections to slow SATA devices on the same port, since there is no alternative but to enable the LLHANG timer on every phy in the port for the current suspension request - there is no way to tell on which phy the RNC in question is currently active. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
OEM parameters [1] are parsed from the platform option-rom / efi driver. By default the driver was validating the parameters for the dual-controller case, but in single-controller case only the first set of parameters may be valid. Limit the validation to the number of actual controllers detected otherwise the driver may fail to parse the valid parameters leading to driver-load or runtime failures. [1] the platform specific set of phy address, configuration,and analog tuning values [stable v3.0+] Cc: <stable@vger.kernel.org> Reported-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Maciej Trela authored
Ensure we enable receiving BCN's from the hardware when adding phy to isci_port. Otherwise if we get BCN before the port is created we won't see any BCN Signed-off-by: Maciej Trela <maciej.trela@intel.com> Reported-by: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Andrzej Jakowski authored
This patch extends timings in COMSAS signaling, so ISCI can detect disc drives having issues to send COMSAS in correct time frame. Signed-off-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
We can retrieve the shost from the sas_ha like the rest of libsas and drop this out of our local data structure. Acked-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
There is a (dubious?) lost irq workaround in sci_controller_isr() that effectively nullifies attempts to disable interrupts. Until the workaround can be re-evaluated add some infrastructure to prevent the interrupt handler from inadvertantly re-enabling interrupts. The failure mode was interrupts continuing to run after the driver had been removed and its iomappings torn down. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Tested-by: Jacek Danecki <jacek.danecki@intel.com> [richard: clear remaining interrupts at the end of reset] Acked-by: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
The call to wait_for_start() is meant to ensure that all links have been given a chance to come up before letting the kernel proceed with probing. However, the implementation is not correctly syncing with the port configuration agent. In the MPC case the ports are hard-coded, in the APC case we need to wait for the port-configuration to form ports from the started phys. Towards that end increase the timeout for the APC agent to form ports, and delay start complete until all phys are out of link-training. Cc: <stable@vger.kernel.org> Cc: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
1/ notify waiters when controller stop completes (fixes 10 second stall unloading the driver) 2/ make sure phy stop is after port and device stop Cc: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Based on an original implementation by Ed Nadolski and Artur Wojcik In preparation for S3/S4 support refactor initialization so that driver-load and resume-from-suspend can share the common init path of isci_host_init(). Organize the initialization into objects that are self-contained to the driver (initialized by isci_host_init) versus those that have some upward registration (initialized at allocation time asd_sas_phy, asd_sas_port, dma allocations). The largest change is moving the the validation of the oem and module parameters from isci_host_init() to isci_host_alloc(). The S3/S4 approach being taken is that libsas will be tasked with remembering the state of the domain and the lldd is free to be forgetful. In the case of isci we'll just re-init using a subset of the normal driver load path. [clean up some unused / mis-indented function definitions in host.h] Signed-off-by: Ed Nadolski <edmund.nadolski@intel.com> Signed-off-by: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Another unused field, and isci_port_init is overkill. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
They serve no incremental purpose over the existing sas_ha state. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Tom Jackson authored
Per the SAS spec, several types of BROADCAST CHANGE primitives must cause re-discovery of the originating expander. Only the standard BROADCAST CHANGE primitive was being sent to the LIBSAS layer. The other BC primitives have been added to the sci_phy_event_handler() Signed-off-by: Tom Jackson <thomas.p.jackson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Holdovers from the initial driver cleanup, replace with enum sas_protocol. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
domain_device ->parent conveys the same information. Occurrences of ->is_direct_attached appear next to incomplete open-coded versions of dev_is_sata(), clean those up as well. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Convert controller state machine warnings to emit the state number (it missed the number to string conversion, but since these error rarely happen not much motivation to go further). Fix up the rnc warnings to use the state name. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
- 13 May, 2012 3 commits
-
-
Linus Torvalds authored
.. and this should hopefully be the last -rc before final 3.4 release.
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM: SoC fixes from Olof Johansson: "I was hoping to be done with fixes for 3.4 but we got two branches from subarch maintainers the last couple of days. So here is one last(?) pull request for arm-soc containing 7 patches: - Five of them are for shmobile dealing with SMP setup and compile failures - The remaining two are for regressions on the Samsung platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull a few more GPIO bug fixes from Grant Likely: "Oops, missed a couple. Here's an updated pull req for GPIO" A set of PCH bug fixes, and one patch to fix up compile warnings * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers
-
- 12 May, 2012 1 commit
-
-
Olof Johansson authored
Merge branch 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board
-