- 10 Dec, 2010 19 commits
-
-
Felipe Balbi authored
musb core doesn't need to know about platform specific details. So start moving clock handling to platform glue layer and make musb core agnostic about that. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
... we will completely drop that need by moving clock handling to platform glue layer. Marking as deprecated will allow us to catch all users easily. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
... then we don't need to export any symbols from glue layer to musb_core. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
that structure currently only holds a device pointer to our own platform_device and musb's platform_device, but soon it will hold pointers to our clock structures and glue-specific bits and pieces. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
that structure currently only holds a device pointer to our own platform_device and musb's platform_device, but soon it will hold pointers to our clock structures and glue-specific bits and pieces. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
that structure currently only holds a device pointer to our own platform_device and musb's platform_device, but soon it will hold pointers to our clock structures and glue-specific bits and pieces. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
that structure currently only holds a device pointer to our own platform_device and musb's platform_device, but soon it will hold pointers to our clock structures and glue-specific bits and pieces. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
that structure currently only holds a device pointer to our own platform_device and musb's platform_device, but soon it will hold pointers to our clock structures and glue-specific bits and pieces. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
that structure currently only holds a device pointer to our own platform_device and musb's platform_device, but soon it will hold pointers to our clock structures and glue-specific bits and pieces. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
Just adding its own platform_driver, not really using it yet. Later patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
change all ocurrences of musb_hdrc to musb-hdrc. We will call glue layer drivers musb-<glue layer>, so in order to keep things somewhat standard, let's change the underscore into a dash. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
when we start splitting HW glue layer, it's gonna make it easier to re-use that structure. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
initialize the musb port on pandaboard. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
- 07 Dec, 2010 2 commits
-
-
Felipe Balbi authored
preparing to a big refactor on musb code. We need to be able to compile in all glue layers (or at least all ARM-based ones) together and have a working binary. While preparing for that, we move every glue layer to export only one symbol, which is a struct musb_platform_ops, and make all other functions static. Later patches will come to allow for compiling all glue layers together and have a working binary. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
This will be passed to musb_core by platform glue layer in order to make it easier to compile support for several HW glue layers. Later patches will come using this structure and also moving HW glue layers to its own platform driver; the idea is to be able to handle platform peculiarities in a manner which doesn't affect one another. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
- 03 Dec, 2010 5 commits
-
-
Greg Kroah-Hartman authored
* 'sh/ehci' of master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Convert to USB_ARCH_HAS_OHCI/EHCI selects. usb: ehci-sh: Add missing ehci helpers. usb: ehci-sh: Fix up fault in shutdown path. sh: Add EHCI support for SH7786. usb: ehci-hcd: Add support for SuperH EHCI. usb: ohci-sh: Set IRQ as shared.
-
git://gitorious.org/usb/usbGreg Kroah-Hartman authored
* 'for-next' of git://gitorious.org/usb/usb: usb: musb: gadget: prevent a NULL pointer dereference usb: musb: add names for IRQs in structure resource usb: musb: remove board_data parameter from musb_platform_init()
-
Namhyung Kim authored
Annotate i1480_est_id_table as '__used' to fix following warning: CC drivers/uwb/i1480/i1480-est.o drivers/uwb/i1480/i1480-est.c:94: warning: ‘i1480_est_id_table’ defined but not used Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Namhyung Kim authored
Annotate whcrc_id_table as '__used' to fix following warning: CC drivers/uwb/whc-rc.o drivers/uwb/whc-rc.c:452: warning: ‘whcrc_id_table’ defined but not used Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Richard Röjfors authored
If g_audio fails to open the sound control device, it crashes at removal: Insertion: [ 4143.836536] g_audio gadget: unable to open sound control device file: /dev/snd/controlC0 [ 4143.836543] g_audio gadget: we need at least one control device [ 4143.836551] g_audio gadget: Linux USB Audio Gadget, version: Dec 18, 2008 [ 4143.836558] g_audio gadget: g_audio ready Removal: [ 4146.802643] BUG: unable to handle kernel paging request at 00023018 [ 4146.802655] IP: [<c10af9f5>] filp_close+0xa/0x5b [ 4146.802674] *pdpt = 0000000015426001 *pde = 0000000000000000 [ 4146.802684] Oops: 0000 [#1] PREEMPT SMP [ 4146.802692] last sysfs file: /sys/power/state [ 4146.802701] Modules linked in: g_audio(-) ioh_udc fuse asix usbnet [last unloaded: g_audio] [ 4146.802719] [ 4146.802728] Pid: 1394, comm: rmmod Not tainted 2.6.33.5-26.1-ivi #1 To be filled by O.E.M./To be filled by O.E.M. [ 4146.802738] EIP: 0060:[<c10af9f5>] EFLAGS: 00010206 CPU: 0 [ 4146.802746] EIP is at filp_close+0xa/0x5b [ 4146.802753] EAX: 00023000 EBX: 00023000 ECX: 00000046 EDX: df842680 [ 4146.802760] ESI: e071cd4c EDI: df842680 EBP: ddbbbef0 ESP: ddbbbee4 [ 4146.802768] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 4146.802776] Process rmmod (pid: 1394, ti=ddbba000 task=dd95a4f0 task.ti=ddbba000) [ 4146.802782] Stack: [ 4146.802787] d540c280 e071cd4c df2bc000 ddbbbefc e071b82c df11e440 ddbbbf04 e071c622 [ 4146.802804] <0> ddbbbf28 e071c47f 00000008 e071cd74 df11e464 df2bc01c df2bc000 e071ce68 [ 4146.802822] <0> 00000880 ddbbbf38 e07fd1b8 e071cef0 00000000 ddbbbf40 e071b9f4 ddbbbf48 [ 4146.802842] Call Trace: [ 4146.802857] [<e071b82c>] ? gaudio_cleanup+0x87/0xe0 [g_audio] [ 4146.802869] [<e071c622>] ? audio_unbind+0x8/0xc [g_audio] [ 4146.802881] [<e071c47f>] ? composite_unbind+0x8d/0xcb [g_audio] [ 4146.802895] [<e07fd1b8>] ? usb_gadget_unregister_driver+0x7b/0xc0 [ioh_udc] [ 4146.802908] [<e071b9f4>] ? usb_composite_unregister+0x15/0x17 [g_audio] [ 4146.802920] [<e071c633>] ? cleanup+0xd/0xf [g_audio] [ 4146.802932] [<c105a938>] ? sys_delete_module+0x185/0x1dd [ 4146.802944] [<c101c3ea>] ? do_page_fault+0x248/0x276 [ 4146.802956] [<c10027d0>] ? sysenter_do_call+0x12/0x26 [ 4146.802962] Code: 12 5f 3a 00 8b 43 04 8b 40 0c 0f b3 30 3b 73 44 73 03 89 73 44 89 f8 e8 f1 61 3a 00 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 <8b> 40 18 85 c0 75 0f 68 32 15 5e c1 31 f6 e8 52 39 3a 00 5a eb [ 4146.803058] EIP: [<c10af9f5>] filp_close+0xa/0x5b SS:ESP 0068:ddbbbee4 [ 4146.803071] CR2: 0000000000023018 [ 4146.803112] ---[ end trace 0989a7e023da0434 ]--- This patch makes sure not to assign the_card if gaudio_open_snd_dev fails, since the parent function will deallocate the card. Also make sure all filp's in gaudio_open_snd_dev is assigned NULL upon error and gaudio_close_snd_dev only cleanups when the filp's are non-NULL. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 01 Dec, 2010 13 commits
-
-
Felipe Balbi authored
Case we can't allocate struct musb_request, prevent a NULL pointer dereference by returning early. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Hema Kalliguddi authored
Soon resource data will get automatically populated from a set of autogenerated data from TI's hardware database for the OMAP platform. Such database, might not have resources at the expected order by the current drivers. While we could hack in some exceptions to that tool to generate resources in a specific order, it seems less fragile to use the resource name instead. That way, no matter what order the resources are generated, the driver still work. Modified the OMAP, Blackfin and Davinci architecture files to add the name of the IRQs in the resource structures and musb driver to use the platform_get_irq_byname() api to get the device and dma irq numbers instead of using the index. Cc: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Hema Kalliguddi authored
Removed the board_data parameter being passed to musb_platform_init function as board_data can be extracted from device structure which is already member of musb structure. Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Paul Mundt authored
This switches over to selects for the subtypes to enable OHCI/EHCI support explicitly rather than littering the usb Kconfig with subtype dependencies. Suggested-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Greg Kroah-Hartman authored
Merge branch 'omap4-ehci-for-greg' of git://dev.omapzoom.org/pub/scm/anand/linux-omap-usb into usb-next * 'omap4-ehci-for-greg' of git://dev.omapzoom.org/pub/scm/anand/linux-omap-usb: omap4: 4430sdp: enable the ehci port on 4430SDP arm: omap4: select USB_ARCH_HAS_EHCI arm: omap4: usb: add platform init code for EHCI arm: omap4: add USBHOST and related base addresses usb: ehci-omap: Add OMAP4 support omap: usb: ehci: introduce HSIC mode usb: ehci-omap: add helpers for checking port mode usb: ehci-omap: use clkdev aliases for functional clocks omap: clock: add clkdev aliases for EHCI clocks usb: ehci: introduce CONFIG_USB_EHCI_HCD_OMAP usb: ehci-omap: don't hard-code TLL channel count usb: ehci-omap: update clock names to be more generic
-
cxie4 authored
This patch add USB client support Marvell PXA9xx/PXA168 chips. The USB controller in PXA9xx/PXA168 is a High-Speed OTG controller. The available endpoints is different between PXA9xx and PXA168. NOTE: It is the first version of Marvell PXA9xx/PXA168 USB controller driver. The support for OTG mode will be added in later patch. PXA9xx and PXA168 has integrated UTMI PHY in the chips. The initialization for the PHY is a little different between PXA9xx and PXA168. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Mundt authored
Several of the EHCI glue drivers either predate or were merged in the same timeframe as API changes at the USB core level, resulting in some missing endpoint_reset and clear_tt_buffer_complete callbacks. This fixes up all of ehci-atmel, mxc, w90x900, and xilinx-of to tie in the new helpers, which brings them in line with everyone else. Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Luo Andy authored
This patch adds test mode support for Langwell gadget driver. Signed-off-by: Henry Yuan <hang.yuan@intel.com> Signed-off-by: Andy Luo <yifei.luo@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Hao Wu authored
This patch modifies the composite gadget to set vbus_draw current limitation during suspend state. This current limitation in suspend state shouldn't be more than 2.5mA Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jarkko Nikula authored
Function twl4030_usb_remove can cause unbalanced regulator disables in twl4030_phy_power if the cable is not connected. Regulator enable/disable calls are in balance only if the twl4030_phy_resume was called prior the twl4030_usb_remove, that is, the cable was connected. Fix this by checking the 'asleep' variable in twl4030_usb_remove since that variable is used to check state in other functions. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Williams authored
Some devices (ex ZTE 2726) simply don't respond at all when data is sent to some of their USB interfaces. The data gets stuck in the TTYs queue and sits there until close(2), which them blocks because closing_wait defaults to 30 seconds (even though the fd is O_NONBLOCK). This is rarely desired. Implement the standard mechanism to adjust closing_wait and let applications handle it how they want to. Signed-off-by: Dan Williams <dcbw@redhat.com>
-
Jesper Juhl authored
Hi, The [vk][cmz]alloc(_node) family of functions return void pointers which it's completely unnecessary/pointless to cast to other pointer types since that happens implicitly. This patch removes such casts from drivers/usb/ Signed-off-by: Jesper Juhl <jj@chaosbits.net>
-
Pete Zaitcev authored
Usually the usbmon returns the amount of data specified in urb->transfer_buffer_length for output submissions and urb->actual_length for input callbacks. However, for Isochronous input transfers, this is not enough, since the returned data buffer may contain "holes". One easy way to fix this is to use urb->transfer_buffer_length, but this often transfers a whole lot of unused data, so we find how much was actually used instead. Original patch by Márton Németh. See also kernel bug 22182. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 30 Nov, 2010 1 commit
-
-
Keshava Munegowda authored
The OMAP4 SDP has an SMSC3320 PHY hooked up to EHCI on Port1. The PHY power is controlled by GPIO 157. Turn on the PHY power, and register the controller at init. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-