- 05 Mar, 2019 14 commits
-
-
Bo He authored
[ Upstream commit 01c10880 ] We see dwc3 endpoint stopped by unwanted irq during suspend resume test, which is caused dwc3 ep can't be started with error "No Resource". Here, add synchronize_irq before suspend to sync the pending IRQ handlers complete. Signed-off-by:
Bo He <bo.he@intel.com> Signed-off-by:
Yu Wang <yu.y.wang@intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 3fe931b3 ] The intel_soc_dts_iosf_init() function doesn't return NULL, it returns error pointers. Fixes: 4d0dd6c1 ("Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit 2137a109 ] In case the upstream clock are not set, which can happen in case the VC5 has no valid upstream clock, the $src variable is used uninited by regmap_update_bits(). Check for this condition and return -EINVAL in such case. Note that in case the VC5 has no valid upstream clock, the VC5 can not operate correctly. That is a hardware property of the VC5. The internal oscilator present in some VC5 models is also considered upstream clock. Signed-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexey Firago <alexey_firago@mentor.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-renesas-soc@vger.kernel.org [sboyd@kernel.org: Added comment about probe preventing this from happening in the first place] Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit c6e90997 ] Add a missing comma so that the output is valid JSON format again. Fixes: 9fba738a ("clk: add duty cycle support") Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d39eca54 ] If tegra_dfll_unregister() fails then "soc" is an error pointer. We should just return instead of dereferencing it. Fixes: 1752c9ee ("clk: tegra: dfll: Fix drvdata overwriting issue") Signed-off-by:
-
Yizhuo authored
[ Upstream commit 8c3590de ] Inside function rt274_i2c_probe(), if regmap_read() function returns -EINVAL, then local variable "val" leaves uninitialized but used in if statement. This is potentially unsafe. Signed-off-by:
Yizhuo <yzhai003@ucr.edu> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 678e2b44 ] The problem is seen in the q6asm_dai_compr_set_params() function: ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys, (prtd->pcm_size / prtd->periods), ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ prtd->periods); In this code prtd->pcm_size is the buffer_size and prtd->periods comes from params->buffer.fragments. If we allow the number of fragments to be zero then it results in a divide by zero bug. One possible fix would be to use prtd->pcm_count directly instead of using the division to re-calculate it. But I decided that it doesn't really make sense to allow zero fragments. Signed-off-by:
-
Rander Wang authored
[ Upstream commit 906a9abc ] For some reason this field was set to zero when all other drivers use .dynamic = 1 for front-ends. This change was tested on Dell XPS13 and has no impact with the existing legacy driver. The SOF driver also works with this change which enables it to override the fixed topology. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Kristian H. Kristensen authored
[ Upstream commit 99c66bc0 ] Prevents deadlock when fifo is full and reader closes file. Signed-off-by:
Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
John Garry authored
commit ffeafdd2 upstream. The sysfs phy_identifier attribute for a sas_end_device comes from the rphy phy_identifier value. Currently this is not being set for rphys with an end device attached, so we see incorrect symlinks from systemd disk/by-path: root@localhost:~# ls -l /dev/disk/by-path/ total 0 lrwxrwxrwx 1 root root 9 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0 -> ../../sdb lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part2 -> ../../sdb2 lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part3 -> ../../sdc3 Indeed, each sas_end_device phy_identifier value is 0: root@localhost:/# more sys/class/sas_device/end_device-0\:0\:2/phy_identifier 0 root@localhost:/# more sys/class/sas_device/end_device-0\:0\:10/phy_identifier 0 This patch fixes the discovery code to set the phy_identifier. With this, we now get proper symlinks: root@localhost:~# ls -l /dev/disk/by-path/ total 0 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy10-lun-0 -> ../../sdg lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy11-lun-0 -> ../../sdh lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0 -> ../../sda lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0-part1 -> ../../sda1 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0 -> ../../sdb lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part2 -> ../../sdb2 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0 -> ../../sdc lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part2 -> ../../sdc2 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part3 -> ../../sdc3 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy5-lun-0 -> ../../sdd lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0 -> ../../sde lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part1 -> ../../sde1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part2 -> ../../sde2 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part3 -> ../../sde3 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0 -> ../../sdf lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part2 -> ../../sdf2 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part3 -> ../../sdf3 Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Reported-by:
dann frazier <dann.frazier@canonical.com> Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Toke Høiland-Jørgensen authored
commit 5c14a4d0 upstream. When we did the original tests for the optimal value of sk_pacing_shift, we came up with 6 ms of buffering as the default. Sadly, 6 is not a power of two, so when picking the shift value I erred on the size of less buffering and picked 4 ms instead of 8. This was probably wrong; those 2 ms of extra buffering makes a larger difference than I thought. So, change the default pacing shift to 7, which corresponds to 8 ms of buffering. The point of diminishing returns really kicks in after 8 ms, and so having this as a default should cut down on the need for extensive per-device testing and overrides needed in the drivers. Cc: stable@vger.kernel.org Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Long Li authored
[ Upstream commit e8da8794 ] On large systems with multiple devices of the same class (e.g. NVMe disks, using managed interrupts), the kernel can affinitize these interrupts to a small subset of CPUs instead of spreading them out evenly. irq_matrix_alloc_managed() tries to select the CPU in the supplied cpumask of possible target CPUs which has the lowest number of interrupt vectors allocated. This is done by searching the CPU with the highest number of available vectors. While this is correct for non-managed CPUs it can select the wrong CPU for managed interrupts. Under certain constellations this results in affinitizing the managed interrupts of several devices to a single CPU in a set. The book keeping of available vectors works the following way: 1) Non-managed interrupts: available is decremented when the interrupt is actually requested by the device driver and a vector is assigned. It's incremented when the interrupt and the vector are freed. 2) Managed interrupts: Managed interrupts guarantee vector reservation when the MSI/MSI-X functionality of a device is enabled, which is achieved by reserving vectors in the bitmaps of the possible target CPUs. This reservation decrements the available count on each possible target CPU. When the interrupt is requested by the device driver then a vector is allocated from the reserved region. The operation is reversed when the interrupt is freed by the device driver. Neither of these operations affect the available count. The reservation persist up to the point where the MSI/MSI-X functionality is disabled and only this operation increments the available count again. For non-managed interrupts the available count is the correct selection criterion because the guaranteed reservations need to be taken into account. Using the allocated counter could lead to a failing allocation in the following situation (total vector space of 10 assumed): CPU0 CPU1 available: 2 0 allocated: 5 3 <--- CPU1 is selected, but available space = 0 managed reserved: 3 7 while available yields the correct result. For managed interrupts the available count is not the appropriate selection criterion because as explained above the available count is not affected by the actual vector allocation. The following example illustrates that. Total vector space of 10 assumed. The starting point is: CPU0 CPU1 available: 5 4 allocated: 2 3 managed reserved: 3 3 Allocating vectors for three non-managed interrupts will result in affinitizing the first two to CPU0 and the third one to CPU1 because the available count is adjusted with each allocation: CPU0 CPU1 available: 5 4 <- Select CPU0 for 1st allocation --> allocated: 3 3 available: 4 4 <- Select CPU0 for 2nd allocation --> allocated: 4 3 available: 3 4 <- Select CPU1 for 3rd allocation --> allocated: 4 4 But the allocation of three managed interrupts starting from the same point will affinitize all of them to CPU0 because the available count is not affected by the allocation (see above). So the end result is: CPU0 CPU1 available: 5 4 allocated: 5 3 Introduce a "managed_allocated" field in struct cpumap to track the vector allocation for managed interrupts separately. Use this information to select the target CPU when a vector is allocated for a managed interrupt, which results in more evenly distributed vector assignments. The above example results in the following allocations: CPU0 CPU1 managed_allocated: 0 0 <- Select CPU0 for 1st allocation --> allocated: 3 3 managed_allocated: 1 0 <- Select CPU1 for 2nd allocation --> allocated: 3 4 managed_allocated: 1 1 <- Select CPU0 for 3rd allocation --> allocated: 4 4 The allocation of non-managed interrupts is not affected by this change and is still evaluating the available count. The overall distribution of interrupt vectors for both types of interrupts might still not be perfectly even depending on the number of non-managed and managed interrupts in a system, but due to the reservation guarantee for managed interrupts this cannot be avoided. Expose the new field in debugfs as well. [ tglx: Clarified the background of the problem in the changelog and described it independent of NVME ] Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Michael Kelley <mikelley@microsoft.com> Link: https://lkml.kernel.org/r/20181106040000.27316-1-longli@linuxonhyperv.comSigned-off-by:
-
Dou Liyang authored
[ Upstream commit 76f99ae5 ] Linux spreads out the non managed interrupt across the possible target CPUs to avoid vector space exhaustion. Managed interrupts are treated differently, as for them the vectors are reserved (with guarantee) when the interrupt descriptors are initialized. When the interrupt is requested a real vector is assigned. The assignment logic uses the first CPU in the affinity mask for assignment. If the interrupt has more than one CPU in the affinity mask, which happens when a multi queue device has less queues than CPUs, then doing the same search as for non managed interrupts makes sense as it puts the interrupt on the least interrupt plagued CPU. For single CPU affine vectors that's obviously a NOOP. Restructre the matrix allocation code so it does the 'best CPU' search, add the sanity check for an empty affinity mask and adapt the call site in the x86 vector management code. [ tglx: Added the empty mask check to the core and improved change log ] Signed-off-by:
Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by:
-
Dou Liyang authored
[ Upstream commit 8ffe4e61 ] Linux finds the CPU which has the lowest vector allocation count to spread out the non managed interrupts across the possible target CPUs, but does not do so for managed interrupts. Split out the CPU selection code into a helper function for reuse. No functional change. Signed-off-by:
-
- 27 Feb, 2019 26 commits
-
-
Greg Kroah-Hartman authored
-
Russell King authored
commit 87454b6e upstream. During testing on Armada 388 platforms, it was found with a certain module configuration that it was possible to trigger a kernel oops during the module load process, caused by the phylink resolver being triggered for a currently disabled interface. This problem was introduced by changing the way the SFP registration works, which now can result in the sfp link down notification being called during phylink_create(). Fixes: b5bfc21a ("net: sfp: do not probe SFP module before we're attached") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
commit 1f60652d upstream. Clang warns when one enumerated type is implicitly converted to another: drivers/pinctrl/pinctrl-max77620.c:56:12: warning: implicit conversion from enumeration type 'enum max77620_pinconf_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] .param = MAX77620_ACTIVE_FPS_SOURCE, ^~~~~~~~~~~~~~~~~~~~~~~~~~ It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/139Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mikulas Patocka authored
commit 68a958a9 upstream. The udlfb driver maintained an open count and cleaned up itself when the count reached zero. But the console is also counted in the reference count - so, if the user unplugged the device, the open count would not drop to zero and the driver stayed loaded with console attached. If the user re-plugged the adapter, it would create a device /dev/fb1, show green screen and the access to the console would be lost. The framebuffer subsystem has reference counting on its own - in order to fix the unplug bug, we rely the framebuffer reference counting. When the user unplugs the adapter, we call unregister_framebuffer unconditionally. unregister_framebuffer will unbind the console, wait until all users stop using the framebuffer and then call the fb_destroy method. The fb_destroy cleans up the USB driver. This patch makes the following changes: * Drop dlfb->kref and rely on implicit framebuffer reference counting instead. * dlfb_usb_disconnect calls unregister_framebuffer, the rest of driver cleanup is done in the function dlfb_ops_destroy. dlfb_ops_destroy will be called by the framebuffer subsystem when no processes have the framebuffer open or mapped. * We don't use workqueue during initialization, but initialize directly from dlfb_usb_probe. The workqueue could race with dlfb_usb_disconnect and this racing would produce various kinds of memory corruption. * We use usb_get_dev and usb_put_dev to make sure that the USB subsystem doesn't free the device under us. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> cc: Dave Airlie <airlied@redhat.com> Cc: Bernie Thompson <bernie@plugable.com>, Cc: Ladislav Michl <ladis@linux-mips.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Taehee Yoo authored
commit 2a61d8b8 upstream. A proc_remove() can sleep. so that it can't be inside of spin_lock. Hence proc_remove() is moved to outside of spin_lock. and it also adds mutex to sync create and remove of proc entry(config->pde). test commands: SHELL#1 %while :; do iptables -A INPUT -p udp -i enp2s0 -d 192.168.1.100 \ --dport 9000 -j CLUSTERIP --new --hashmode sourceip \ --clustermac 01:00:5e:00:00:21 --total-nodes 3 --local-node 3; \ iptables -F; done SHELL#2 %while :; do echo +1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; \ echo -1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; done [ 2949.569864] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 [ 2949.579944] in_atomic(): 1, irqs_disabled(): 0, pid: 5472, name: iptables [ 2949.587920] 1 lock held by iptables/5472: [ 2949.592711] #0: 000000008f0ebcf2 (&(&cn->lock)->rlock){+...}, at: refcount_dec_and_lock+0x24/0x50 [ 2949.603307] CPU: 1 PID: 5472 Comm: iptables Tainted: G W 4.19.0-rc5+ #16 [ 2949.604212] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 2949.604212] Call Trace: [ 2949.604212] dump_stack+0xc9/0x16b [ 2949.604212] ? show_regs_print_info+0x5/0x5 [ 2949.604212] ___might_sleep+0x2eb/0x420 [ 2949.604212] ? set_rq_offline.part.87+0x140/0x140 [ 2949.604212] ? _rcu_barrier_trace+0x400/0x400 [ 2949.604212] wait_for_completion+0x94/0x710 [ 2949.604212] ? wait_for_completion_interruptible+0x780/0x780 [ 2949.604212] ? __kernel_text_address+0xe/0x30 [ 2949.604212] ? __lockdep_init_map+0x10e/0x5c0 [ 2949.604212] ? __lockdep_init_map+0x10e/0x5c0 [ 2949.604212] ? __init_waitqueue_head+0x86/0x130 [ 2949.604212] ? init_wait_entry+0x1a0/0x1a0 [ 2949.604212] proc_entry_rundown+0x208/0x270 [ 2949.604212] ? proc_reg_get_unmapped_area+0x370/0x370 [ 2949.604212] ? __lock_acquire+0x4500/0x4500 [ 2949.604212] ? complete+0x18/0x70 [ 2949.604212] remove_proc_subtree+0x143/0x2a0 [ 2949.708655] ? remove_proc_entry+0x390/0x390 [ 2949.708655] clusterip_tg_destroy+0x27a/0x630 [ipt_CLUSTERIP] [ ... ] Fixes: b3e456fc ("netfilter: ipt_CLUSTERIP: fix a race condition of proc file creation") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Fernando Fernandez Mancera authored
commit 1a6a0951 upstream. When we check the tcp options of a packet and it doesn't match the current fingerprint, the tcp packet option pointer must be restored to its initial value in order to do the proper tcp options check for the next fingerprint. Here we can see an example. Assumming the following fingerprint base with two lines: S10:64:1:60:M*,S,T,N,W6: Linux:3.0::Linux 3.0 S20:64:1:60:M*,S,T,N,W7: Linux:4.19:arch:Linux 4.1 Where TCP options are the last field in the OS signature, all of them overlap except by the last one, ie. 'W6' versus 'W7'. In case a packet for Linux 4.19 kicks in, the osf finds no matching because the TCP options pointer is updated after checking for the TCP options in the first line. Therefore, reset pointer back to where it should be. Fixes: 11eeef41 ("netfilter: passive OS fingerprint xtables match") Signed-off-by:
Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by:
-
Eli Cooper authored
commit 15df03c6 upstream. Commit 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") made ip6_route_me_harder() keep the original oif for link-local and multicast packets. However, it also affected packets for the loopback address because it used rt6_need_strict(). REDIRECT rules in the OUTPUT chain rewrite the destination to loopback address; thus its oif should not be preserved. This commit fixes the bug that redirected local packets are being dropped. Actually the packet was not exactly dropped; Instead it was sent out to the original oif rather than lo. When a packet with daddr ::1 is sent to the router, it is effectively dropped. Fixes: 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 753c111f upstream. Fetch pointer to module before target object is released. Fixes: 29e38801 ("netfilter: nf_tables: fix use-after-free when deleting compat expressions") Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by:
-
Pablo Neira Ayuso authored
commit 23b7ca4f upstream. Flush after rule deletion bogusly hits -ENOENT. Skip rules that have been already from nft_delrule_by_chain() which is always called from the flush path. Fixes: cf9dc09d ("netfilter: nf_tables: fix missing rules flushing per table") Reported-by:
Phil Sutter <phil@nwl.cc> Acked-by:
-
Hangbin Liu authored
commit 278e2148 upstream. This reverts commit 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by:
Linus Lüssing <linus.luessing@c0d3.blue> Reported-by:
Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Gao Xiang authored
commit b8e076a6 upstream. remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs. Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Gao Xiang authored
commit 70b17991 upstream. remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs. Signed-off-by:
-
Gao Xiang authored
commit 8b987bca upstream. remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs. Signed-off-by:
-
Gao Xiang authored
commit 948bbdb1 upstream. Just like other generic locks, insert a full barrier in case of memory reorder. Reviewed-by:
-
Gao Xiang authored
commit 73f5c66d upstream. There are two minor issues in the current freeze interface: 1) Freeze interfaces have not related with CONFIG_DEBUG_SPINLOCK, therefore fix the incorrect conditions; 2) For SMP platforms, it should also disable preemption before doing atomic_cmpxchg in case that some high priority tasks preempt between atomic_cmpxchg and disable_preempt, then spin on the locked refcount later. Reviewed-by:
-
Gao Xiang authored
commit df134b8d upstream. It's better to use atomic_cond_read_relaxed, which is implemented in hardware instructions to monitor a variable changes currently for ARM64, instead of open-coded busy waiting. Reviewed-by:
-
Gao Xiang authored
commit e9c89246 upstream. There is actually no need at all to d_rehash() for the root dentry as Al pointed out, fix it. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Gao Xiang authored
commit e5e3abba upstream. Multiref support means that a compressed page could have more than one reference, which is designed for on-disk data deduplication. However, mkfs doesn't support this mode at this moment, and the kernel implementation is also broken. Let's drop multiref support. If it is fully implemented in the future, it can be reverted later. Signed-off-by:
-
Chen Gong authored
commit 9141b60c upstream. This patch replace BUG_ON with DBG_BUGON in data.c, and add necessary error handler. Signed-off-by:
Chen Gong <gongchen4@huawei.com> Reviewed-by:
-
Gao Xiang authored
commit 1e05ff36 upstream. This patch completes error handing code of z_erofs_do_read_page. PG_error will be set when some read error happens, therefore z_erofs_onlinepage_endio will unlock this page without setting PG_uptodate. Reviewed-by:
Chao Yu <yucxhao0@huawei.com> Signed-off-by:
-
Gao Xiang authored
commit 0734ffbf upstream. As described in Kconfig, the last compressed pack should be cached for further reading for either `EROFS_FS_ZIP_CACHE_UNIPOLAR' or `EROFS_FS_ZIP_CACHE_BIPOLAR' by design. However, there is a bug in z_erofs_do_read_page, it will switch `initial' to `false' at the very beginning before it decides to cache the last compressed pack. caching strategy should work properly after appling this patch. Reviewed-by:
-
Willem de Bruijn authored
commit 9e8db591 upstream. GSO packets with vnet_hdr must conform to a small set of gso_types. The below commit uses flow dissection to drop packets that do not. But it has false positives when the skb is not fully initialized. Dissection needs skb->protocol and skb->network_header. Infer skb->protocol from gso_type as the two must agree. SKB_GSO_UDP can use both ipv4 and ipv6, so try both. Exclude callers for which network header offset is not known. Fixes: d5be7f63 ("net: validate untrusted gso packets without csum offload") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
commit d5be7f63 upstream. Syzkaller again found a path to a kernel crash through bad gso input. By building an excessively large packet to cause an skb field to wrap. If VIRTIO_NET_HDR_F_NEEDS_CSUM was set this would have been dropped in skb_partial_csum_set. GSO packets that do not set checksum offload are suspicious and rare. Most callers of virtio_net_hdr_to_skb already pass them to skb_probe_transport_header. Move that test forward, change it to detect parse failure and drop packets on failure as those cleary are not one of the legitimate VIRTIO_NET_HDR_GSO types. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Yu Zhang authored
commit 511da98d upstream. Previously, 'commit 372fddf7 ("x86/mm: Introduce the 'no5lvl' kernel parameter")' cleared X86_FEATURE_LA57 in boot_cpu_data, if Linux chooses to not run in 5-level paging mode. Yet boot_cpu_data is queried by do_cpuid_ent() as the host capability later when creating vcpus, and Qemu will not be able to detect this feature and create VMs with LA57 feature. As discussed earlier, VMs can still benefit from extended linear address width, e.g. to enhance features like ASLR. So we would like to fix this, by return the true hardware capability when Qemu queries. Signed-off-by:
Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Felix Fietkau authored
commit 51d0af22 upstream. Forwarded packets enter the tx path through ieee80211_add_pending_skb, which skips the ieee80211_skb_resize call. Fixes WARN_ON in ccmp_encrypt_skb and resulting packet loss. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Leo (Hanghong) Ma authored
commit d2f0b53b upstream. [Why] drm_dp_mst_topology_mgr_suspend() is added into the new reboot sequence, which disables the UP request at the beginning. Therefore sideband messages are blocked. [How] Finish MST sideband message transaction before UP request is suppressed. Signed-off-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
