- 06 Feb, 2024 19 commits
-
-
Sebastian Andrzej Siewior authored
Since commit 52df157f ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") dst_destroy() returns only NULL and no caller cares about the return value. There are no in in-tree users of dst_destroy() outside of the file. Make dst_destroy() static and return void. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240202163746.2489150-1-bigeasy@linutronix.deSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Claudiu Beznea says: ==================== net: ravb: Prepare for suspend to RAM and runtime PM support (part 1) This series prepares ravb driver for runtime PM support and adjust the already existing suspend to RAM code to work for RZ/G3S (R9A08G045) SoC. As there are IP versions that switch to module standby when disabling the clocks, and because of module standby IP switches to reset and the register content is lost, to be able to have runtime PM supported for all IP variants, the configuration operations were moved all to ravb_open()/ravb_close() letting the ravb_probe() and ravb_remove() to deal with resource parsing and allocation/free. The ethtool and IOCTL APIs that could have been run asyncronously were adapted to return if the interface is down. As explained in each individual commits description, this should be harmless. Along with it, the series contains preparatory cleanups. The series has been tested on the boards with the following device trees: - r8a7742-iwg21d-q7.dts - r8a774a1-hihope-rzg2m-ex.dts - r9a07g043u11-smarc-rzg2ul.dts - r9a07g054l2-smarc-rzv2l.dts - r9a07g044l2-smarc-rzg2l.dts Changes in v6: - fixed typo in patch 08/15 - re-arranged the tags as my b4 am/shazam placed the Rb tags before author's Sob tag Changes in v5: - collected tags - fixed typos in patches description - improved description for patch 07/15 - collected tags Changes in v4: - changed cover letter title and keep on 15 patches in series to cope with requirement at [1] - add dependency on RESET_CONTROLLER in patch "net: ravb: Make reset controller support mandatory" - use pm_runtime_active() in patch "net: ravb: Move the IRQs get and request in the probe function" - set config more before reading the mac address in patch "net: ravb: Set config mode in ndo_open and reset mode in ndo_close" - collected tags [1] https://www.kernel.org/doc/html/v6.6/process/maintainer-netdev.html#tl-dr Changes in v3: - collected tags - addressed review comments - squashed patch 17/21 ("net: ravb: Keep clock request operations grouped together") from v2 in patch 07/19 ("net: ravb: Move reference clock enable/disable on runtime PM APIs") from v3 - check for ndev->flags & IFF_UP in patch 17/19 and 18/19 instead of checking netif_running() - dropped patch 19/21 ("net: ravb: Do not set promiscuous mode if the interface is down") as the changes there are not necessary as ndev->flags & IFF_UP is already checked at the beginning of __dev_set_rx_mode() - remove code from ravb_open() introduced by patch 20/21 ("net: ravb: Do not apply RX CSUM settings to hardware if the interface is down") from v2 as this is not necessary; driver already takes care of this in ravb_emac_init_rcar() Changes in v2: - rework the driver (mainly, ravb_open() contains now only resource allocation and parsing leaving the settings to ravb_open(); ravb_remove() has been adapted accordingly) to be able to use runtime PM for all IP variants; due to this number of patches increased - adjust previous series to review comments - collected tags - populated driver's own runtime PM ops with enable/disable of reference clock ==================== Link: https://lore.kernel.org/r/20240202084136.3426492-1-claudiu.beznea.uj@bp.renesas.comSigned-off-by:
-
Claudiu Beznea authored
Remove explicit calls to functions that are called by ravb_open(). There is no need to have them doubled now that the ravb_open() already contains what is needed for the interface configuration. Along with it, configurations needed by PTP were moved to ravb_wol_restore(). With this, code in ravb_resume() becomes simpler. Signed-off-by:
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
-
Claudiu Beznea authored
As ravb_close() contains now the call to ravb_ptp_stop() for both ccc_gac and gPTP aware platforms, there is no need to keep the separate call in ravb_suspend(). Instead, move it to ravb_wol_setup(). In this way the resulting code is cleaner. Signed-off-by:
-
Claudiu Beznea authored
As some IP variants switch to reset mode (and thus the register contents is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM and save more power, set the IP's operating mode to reset at the end of the probe. Along with it, in the ndo_open API the IP will be switched to configuration, then operation mode. In the ndo_close API, the IP will be switched back to reset mode. This allows implementing runtime PM and, along with it, save more power when the IP is not used. Signed-off-by:
-
Claudiu Beznea authored
The initialization sequence for PTP is the same for platforms with ccc_gac and gptp (according to "Figure 50.71 Flow of gPTP Initialization (Normal, Common to All Modes)" of the R-Car Series, 3rd generation hardware manual and "Figure 37A.53 Flow of gPTP Initialization (Normal, Common to All Modes)" of the RZ/G Series hardware manual). As some IP variants switch to reset mode (and thus the registers content is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM, move the PTP initialization to the driver's ndo_open API. This commit prepares the code for the addition of runtime PM. Signed-off-by:
-
Claudiu Beznea authored
DBAT setup was done in the driver's probe API. As some IP variants switch to reset mode (and thus registers content is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM move the DBAT configuration in the driver's ndo_open API. This commit prepares the code for the addition of runtime PM. Signed-off-by:
-
Claudiu Beznea authored
Delay parsing and setting were done in the driver's probe API. As some IP variants switch to reset mode (and thus the register contents is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM keep the delay parsing in the driver's probe function and move the delay applying function to the driver's ndo_open API. Along with it, ravb_parse_delay_mode() function was moved close to ravb_set_delay_mode() function to have the delay specific code in the same place. Signed-off-by:
-
Claudiu Beznea authored
ravb_set_gti() was computing the value of GTI based on the reference clock rate and then applied it to register. This was done on the driver's probe function. In order to implement runtime PM for all IP variants (as some IP variants switches to reset mode (and thus the registers content is lost) when module standby is configured through clock APIs) the GTI setup was split in 2 parts: one computing the value of the GTI register (done in the driver's probe function) and one applying the computed value to register (done in the driver's ndo_open API). Signed-off-by:
-
Claudiu Beznea authored
The runtime PM implementation will disable clocks at the end of ravb_probe(). As some IP variants switch to reset mode as a result of setting module standby through clock disable APIs, to implement runtime PM the resource parsing and requesting are moved in the probe function and IP settings are moved in the open function. This is done because at the end of the probe some IP variants will switch anyway to reset mode and the registers content is lost. Also keeping only register settings operations in the ravb_open()/ravb_close() functions will make them faster. Commit moves IRQ requests to ravb_probe() to have all the IRQs ready when the interface is open. As now getting/requesting IRQs is done in a single place there is no need to keep intermediary data (like ravb_rx_irqs[] and ravb_tx_irqs[] arrays or IRQs in struct ravb_private). In order to avoid accessing the IP registers while the IP is runtime suspended (e.g. in the timeframe b/w the probe requests shared IRQs and IP clocks are enabled) in the interrupt handlers were introduced pm_runtime_active() checks. The device runtime PM usage counter has been incremented to avoid disabling the device's clocks while the check is in progress (if any). This is a preparatory change to add runtime PM support for all IP variants. Signed-off-by:
-
Claudiu Beznea authored
Reference clock could be or not be part of the power domain. If it is part of the power domain, the power domain takes care of properly setting it. In case it is not part of the power domain and full runtime PM support is available in driver the clock will not be propertly disabled/enabled at runtime. For this, keep the prepare/unprepare operations in the driver's probe()/remove() functions and move the enable/disable in runtime PM functions. By doing this, the previous ravb_runtime_nop() function was renamed ravb_runtime_suspend() and the comment was removed. A proper runtime PM resume function was added (ravb_runtime_resume()). The current driver still don't need to make any register settings on runtime suspend/resume (as expressed in the removed comment) because, currently, pm_runtime_put_sync() is called on the driver remove function. This will be changed in the next commits (that extends the runtime PM support) such that proper register settings (along with runtime resume/suspend) will be done on ravb_open()/ravb_close(). Along with it, the other clock request operations were moved close to reference clock request and prepare to have all the clock requests specific code grouped together. Signed-off-by:
-
Claudiu Beznea authored
RZ/G3S can go to deep sleep states where power to most of the SoC parts is off. When resuming from such a state, the Ethernet controller needs to be reinitialized. De-asserting the reset signal for it should also be done. Thus, add reset assert/de-assert on suspend/resume functions. On the resume function, the de-assert was not reverted in case of failures to give the user a chance to restore the interface (e.g., bringing down/up the interface) in case suspend/resume failed. Signed-off-by:
-
Claudiu Beznea authored
Use tabs instead of spaces in the ravb_set_rate_gbeth() function. This aligns with the coding style requirements. Signed-off-by:
-
Claudiu Beznea authored
SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated now and require __maybe_unused protection against unused function warnings. The usage of pm_ptr() and SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() allows the compiler to see the functions, thus suppressing the warning. Thus drop the __maybe_unused markings. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Claudiu Beznea authored
On the RZ/G3S SoC the reset controller is mandatory for the IP to work. The device tree binding documentation for the ravb driver specifies that the resets are mandatory. Based on this, make the resets mandatory also in driver for all ravb devices. Signed-off-by:
-
Claudiu Beznea authored
ravb_rzv2m_hw_info::gptp_ref_clk is enabled only for RZ/V2M. RZ/V2M is an ARM64-based device which selects power domains by default and CONFIG_PM. The RZ/V2M Ethernet DT node has proper power-domain binding available in device tree from the commit that added the Ethernet node. (4872ca1f ("arm64: dts: renesas: r9a09g011: Add ethernet nodes")). Power domain support was available in the rzg2l-cpg.c driver when the Ethernet DT node has been enabled in RZ/V2M device tree. (ef3c613c ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")). Thus, remove the explicit clock enable for gptp_clk (and treat it as the other clocks are treated) as it is not needed and removing it doesn't break the ABI according to the above explanations. By removing the enable/disable operation from the driver we can add runtime PM support (which operates on clocks) w/o the need to handle the gptp_clk in the Ethernet driver functions like ravb_runtime_nop(). PM domain does all that is needed. Signed-off-by:
-
Claudiu Beznea authored
ravb_poll() initial code used to interrogate the first descriptor of the RX queue in case gPTP is false to determine if ravb_rx() should be called. This is done for non-gPTP IPs. For gPTP IPs the driver PTP-specific information was used to determine if receive function should be called. As every IP has its own receive function that interrogates the RX descriptors list in the same way the ravb_poll() was doing there is no need to double check this in ravb_poll(). Removing the code from ravb_poll() leads to a cleaner code. Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
Bo Liu <liubo03@inspur.com> Link: https://lore.kernel.org/r/20240202064336.39138-1-liubo03@inspur.comSigned-off-by:
-
Willem de Bruijn authored
This test is time sensitive. It may fail on virtual machines and for debug builds. Continue to run in these environments to get code coverage. But optionally suppress failure for timing errors (only). This is controlled with environment variable KSFT_MACHINE_SLOW. The test continues to return 0 (KSFT_PASS), rather than KSFT_XFAIL as previously discussed. Because making so_txtime.c return that and then making so_txtime.sh capture runs that pass that vs KSFT_FAIL and pass it on added a bunch of (fragile bash) boilerplate, while the result is interpreted the same as KSFT_PASS anyway. Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240201162130.2278240-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
- 05 Feb, 2024 15 commits
-
-
David Wei authored
Add a Makefile for netdevsim selftests and add selftests path to MAINTAINERS Signed-off-by:
David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240130214620.3722189-5-dw@davidwei.ukSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixups for qca8k ds->user_mii_bus cleanup The series "ds->user_mii_bus cleanup (part 1)" from the last development cycle: https://patchwork.kernel.org/project/netdevbpf/cover/20240104140037.374166-1-vladimir.oltean@nxp.com/ had some review comments I didn't have the time to address at the time. One from Alvin and one from Luiz. They can reasonably be treated as improvements for v6.9. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
It was pointed out during the review [1] of commit 68e1010c ("net: dsa: qca8k: put MDIO bus OF node on qca8k_mdio_register() failure") that the rest of the qca8k driver uses "int ret" rather than "int err". Make everything consistent in that regard, not only qca8k_mdio_register(), but also qca8k_setup_mdio_bus(). [1] https://lore.kernel.org/netdev/qyl2w3ownx5q7363kqxib52j5htar4y6pkn7gen27rj45xr4on@pvy5agi6o2te/Suggested-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
It was pointed out during the review [1] of commit e66bf63a ("net: dsa: qca8k: skip MDIO bus creation if its OF node has status = "disabled"") that we now leak a reference to the "mdio" OF node if it is disabled. This is only a concern when using dynamic OF as far as I can tell (like probing on an overlay), since OF nodes are never freed in the regular case. Additionally, I'm unaware of any actual device trees (in production or elsewhere) which have status = "disabled" for the MDIO OF node. So handling this as a simple enhancement. [1] https://lore.kernel.org/netdev/CAJq09z4--Ug+3FAmp=EimQ8HTQYOWOuVon-PUMGB5a1N=RPv4g@mail.gmail.com/Suggested-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
These got misaligned after commit 6ca80638 ("net: dsa: Use conduit and user terms"). Signed-off-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Breno Leitao authored
commit 1c870c63 ("net: fill in MODULE_DESCRIPTION()s for ocelot") got a suggestion from Vladimir Oltean after it had landed in net-next. Rewrite the module description according to Vladimir's suggestion. Fixes: 1c870c63 ("net: fill in MODULE_DESCRIPTION()s for ocelot") Suggested-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
-
Breno Leitao authored
lib/test_blackhole_dev.c sets a variable that is never read, causing this following building warning: lib/test_blackhole_dev.c:32:17: warning: variable 'ethh' set but not used [-Wunused-but-set-variable] Remove the variable struct ethhdr *ethh, which is unused. Fixes: 509e56b3 ("blackhole_dev: add a selftest") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
David S. Miller authored
Matthieu Baerts says: ==================== mptcp: annotate lockless access This is a series of 5 patches from Paolo to annotate lockless access. The MPTCP locking schema is already quite complex. We need to clarify it and make the lockless access already there consistent, or later changes will be even harder to follow and understand. This series goes through all the msk fields accessed in the RX and TX path and makes the lockless annotation consistent with the in-use locking schema. As a bonus, this should fix data races eventually found by fuzzers -- even if we haven't seen many such reports so far. Patch 1/5 hints we could remove "local_key" and "remote_key" from the subflow context, and always use the ones from the msk socket, possibly reducing the context memory usage. That change is left over as a possible follow-up. ==================== Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
-
Paolo Abeni authored
The following MPTCP socket fields: - can_ack - fully_established - rcv_data_fin - snd_data_fin_enable - rcv_fastclose - use_64bit_ack are accessed without any lock, add the appropriate annotation. The schema is safe as each field can change its value at most once in the whole mptcp socket life cycle. Signed-off-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Paolo Abeni authored
The token field is manipulated under the msk socket lock and accessed lockless in a few spots, add proper ONCE annotation Signed-off-by:
-
Paolo Abeni authored
The following fields: - ack_seq - snd_una - wnd_end - rmem_fwd_alloc are protected by the data lock end accessed lockless in a few spots. Ensure ONCE annotation for write (under such lock) and for lockless read. Signed-off-by:
-
Paolo Abeni authored
The mptcp-level TX path info (write_seq, bytes_sent, snd_nxt) are under the msk socket lock protection, and are accessed lockless in a few spots. Always mark the write operations with WRITE_ONCE, read operations outside the lock with READ_ONCE and drop the annotation for read under such lock. To simplify the annotations move mptcp_pending_data_fin_ack() from __mptcp_data_acked() to __mptcp_clean_una(), under the msk socket lock, where such call would belong. Signed-off-by:
-
Paolo Abeni authored
Both the local and the remote key follow the same locking schema, put in place the proper ONCE accessors. Signed-off-by:
-
Gerhard Engleder authored
Similar chunk of code is used in tsnep_rx_poll_zc() and tsnep_rx_reopen_xsk() to maintain the RX XDP_RING_NEED_WAKEUP flag. Consolidate the code to common helper function. Suggested-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Eric Dumazet authored
We can change sctp_sk() to propagate its argument const qualifier, thanks to container_of_const(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
- 04 Feb, 2024 6 commits
-
-
Eric Dumazet authored
We can use a global dev_unreg_count counter instead of a per netns one. As a bonus we can factorize the changes done on it for bulk device removals. Signed-off-by:
-
Yunjian Wang authored
Implement the tun .get_channels functionality. This feature is necessary for some tools, such as libxdp, which need to retrieve the queue count. Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Reviewed-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Yunjian Wang authored
This fixes the following code style problem: - WARNING: please, no spaces at the start of a line - CHECK: Please use a blank line after function/struct/union/enum declarations Signed-off-by: -
Heiner Kallweit authored
This adds support for the RTL8126A found on Asus z790 Maximus Formula. It was successfully tested w/o the firmware at 1000Mbps. Firmware file has been provided by Realtek and submitted to linux-firmware. 2.5G and 5G modes are untested. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Paolo points out that ifconfig is legacy and we should not use it. Signed-off-by:
-
Horatiu Vultur authored
By default lan8841's 1588 clock frequency is 125MHz. But when adjusting the frequency, it is using the 1PPM format of the lan8814. Which is the wrong format as lan8814 has a 1588 clock frequency of 250MHz. So then for each 1PPM adjustment would adjust less than expected. Therefore fix this by using the correct 1PPM format for lan8841. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
-
