1. 06 Oct, 2011 13 commits
    • Mark Salter's avatar
      C6X: devicetree support · 041cadca
      Mark Salter authored
      This is the basic devicetree support for C6X. Currently, four boards are
      supported. Each one uses a different SoC part. Two of the four supported
      SoCs are multicore. One with 3 cores and the other with 6 cores. There is
      no coherency between the core-level caches, so SMP is not an option. It is
      possible to run separate kernel instances on the various cores. There is
      currently no C6X bootloader support for device trees so we build in the DTB
      for now.
      
      There are some interesting twists to the hardware which are of note for device
      tree support. Each core has its own interrupt controller which is controlled
      by special purpose core registers. This core controller provides 12 general
      purpose prioritized interrupt sources. Each core is contained within a
      hardware "module" which provides L1 and L2 caches, power control, and another
      interrupt controller which cascades into the core interrupt controller. These
      core module functions are controlled by memory mapped registers. The addresses
      for these registers are the same for each core. That is, when coreN accesses
      a module-level MMIO register at a given address, it accesses the register for
      coreN even though other cores would use the same address to access the register
      in the module containing those cores. Other hardware modules (timers, enet, etc)
      which are memory mapped can be accessed by all cores.
      
      The timers need some further explanation for multicore SoCs. Even though all
      timer control registers are visible to all cores, interrupt routing or other
      considerations may make a given timer more suitable for use by a core than
      some other timer. Because of this and the desire to have the same image run
      on more than one core, the timer nodes have a "ti,core-mask" property which
      is used by the driver to scan for a suitable timer to use.
      Signed-off-by: default avatarMark Salter <msalter@redhat.com>
      Signed-off-by: default avatarAurelien Jacquiot <a-jacquiot@ti.com>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      041cadca
    • Aurelien Jacquiot's avatar
      C6X: early boot code · c1a144d7
      Aurelien Jacquiot authored
      Original port to early 2.6 kernel using TI COFF toolchain.
      Brought up to date by Mark Salter <msalter@redhat.com>
      
      This patch provides the early boot code for C6X architecture. There is a
      16 entry vector table which is used to direct reset and interrupt events. The
      vector table entries contain a small amount of code (maximum of 8 opcodes)
      which simply branches to the actual event handling code.
      
      The head.S code simply clears BSS, setups up a few control registers, and calls
      machine_init followed by start_kernel. The machine_init code in setup.c does
      the early flat tree parsing (memory, commandline, etc). At setup_arch time, the
      code does the usual memory setup and minimally scans the devicetree for any
      needed information.
      Signed-off-by: default avatarAurelien Jacquiot <a-jacquiot@ti.com>
      Signed-off-by: default avatarMark Salter <msalter@redhat.com>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      c1a144d7
    • Aurelien Jacquiot's avatar
      C6X: build infrastructure · c278400c
      Aurelien Jacquiot authored
      Original port to early 2.6 kernel using TI COFF toolchain.
      Brought up to date by Mark Salter <msalter@redhat.com>
      Signed-off-by: default avatarAurelien Jacquiot <a-jacquiot@ti.com>
      Signed-off-by: default avatarMark Salter <msalter@redhat.com>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      c278400c
    • Mark Salter's avatar
      e66d3c49
    • Mark Salter's avatar
      add ELF machine define for TI C6X DSPs · 854a6852
      Mark Salter authored
      Signed-off-by: default avatarMark Salter <msalter@redhat.com>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      854a6852
    • Mark Salter's avatar
      fixed generic page.h for non-zero PAGE_OFFSET · b7a0556e
      Mark Salter authored
      asm-generic/page.h had several problems when used with a non-zero PAGE_OFFSET.
      This patch adds a default ARCH_PFN_OFFSET and fixes the __va, __pa, and
      pfn_valid macros to work with non-zero PAGE_OFFSETs.
      Signed-off-by: default avatarMark Salter <msalter@redhat.com>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      b7a0556e
    • Mark Salter's avatar
      fix default __strnlen_user macro · 830f5800
      Mark Salter authored
      The existing __strnlen_user macro simply resolved to strnlen. However, the
      count returned by strnlen_user should include the NULL byte. This patch
      fixes the __strnlen_user macro to include the NULL byte in the count.
      Signed-off-by: default avatarMark Salter <msalter@redhat.com>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      830f5800
    • Linus Torvalds's avatar
      Merge git://github.com/davem330/net · 3ee72ca9
      Linus Torvalds authored
      * git://github.com/davem330/net:
        net: fix typos in Documentation/networking/scaling.txt
        bridge: leave carrier on for empty bridge
        netfilter: Use proper rwlock init function
        tcp: properly update lost_cnt_hint during shifting
        tcp: properly handle md5sig_pool references
        macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode
      3ee72ca9
    • Paul Menzel's avatar
      x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE · 29cf7a30
      Paul Menzel authored
      In summary, this DMI quirk uses the _CRS info by default for the ASUS
      M2V-MX SE by turning on `pci=use_crs` and is similar to the quirk
      added by commit 2491762c ("x86/PCI: use host bridge _CRS info on
      ASRock ALiveSATA2-GLAN") whose commit message should be read for further
      information.
      
      Since commit 3e3da00c ("x86/pci: AMD one chain system to use pci
      read out res") Linux gives the following oops:
      
          parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
          HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
          HDA Intel 0000:20:01.0: setting latency timer to 64
          BUG: unable to handle kernel paging request at ffffc90011c08000
          IP: [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
          PGD 13781a067 PUD 13781b067 PMD 1300ba067 PTE 800000fd00000173
          Oops: 0009 [#1] SMP
          last sysfs file: /sys/module/snd_pcm/initstate
          CPU 0
          Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event tpm_tis tpm snd_seq tpm_bios psmouse parport_pc snd_timer snd_seq_device parport processor evdev snd i2c_viapro thermal_sys amd64_edac_mod k8temp i2c_core soundcore shpchp pcspkr serio_raw asus_atk0110 pci_hotplug edac_core button snd_page_alloc edac_mce_amd ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid1 md_mod usbhid hid sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd sata_via pata_via libata ehci_hcd usbcore scsi_mod via_rhine mii nls_base [last unloaded: scsi_wait_scan]
          Pid: 1153, comm: work_for_cpu Not tainted 2.6.37-1-amd64 #1 M2V-MX SE/System Product Name
          RIP: 0010:[<ffffffffa0578402>]  [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
          RSP: 0018:ffff88013153fe50  EFLAGS: 00010286
          RAX: ffffc90011c08000 RBX: ffff88013029ec00 RCX: 0000000000000006
          RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
          RBP: ffff88013341d000 R08: 0000000000000000 R09: 0000000000000040
          R10: 0000000000000286 R11: 0000000000003731 R12: ffff88013029c400
          R13: 0000000000000000 R14: 0000000000000000 R15: ffff88013341d090
          FS:  0000000000000000(0000) GS:ffff8800bfc00000(0000) knlGS:00000000f7610ab0
          CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
          CR2: ffffc90011c08000 CR3: 0000000132f57000 CR4: 00000000000006f0
          DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
          DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
          Process work_for_cpu (pid: 1153, threadinfo ffff88013153e000, task ffff8801303c86c0)
          Stack:
           0000000000000005 ffffffff8123ad65 00000000000136c0 ffff88013029c400
           ffff8801303c8998 ffff88013341d000 ffff88013341d090 ffff8801322d9dc8
           ffff88013341d208 0000000000000000 0000000000000000 ffffffff811ad232
          Call Trace:
           [<ffffffff8123ad65>] ? __pm_runtime_set_status+0x162/0x186
           [<ffffffff811ad232>] ? local_pci_probe+0x49/0x92
           [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b
           [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b
           [<ffffffff8105afd0>] ? do_work_for_cpu+0xb/0x1b
           [<ffffffff8105fd3f>] ? kthread+0x7a/0x82
           [<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10
           [<ffffffff8105fcc5>] ? kthread+0x0/0x82
           [<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10
          Code: f4 01 00 00 ef 31 f6 48 89 df e8 29 dd ff ff 85 c0 0f 88 2b 03 00 00 48 89 ef e8 b4 39 c3 e0 8b 7b 40 e8 fc 9d b1 e0 48 8b 43 38 <66> 8b 10 66 89 14 24 8b 43 14 83 e8 03 83 f8 01 77 32 31 d2 be
          RIP  [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
           RSP <ffff88013153fe50>
          CR2: ffffc90011c08000
          ---[ end trace 8d1f3ebc136437fd ]---
      
      Trusting the ACPI _CRS information (`pci=use_crs`) fixes this problem.
      
          $ dmesg | grep -i crs # with the quirk
          PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
      
      The match has to be against the DMI board entries though since the vendor entries are not populated.
      
          DMI: System manufacturer System Product Name/M2V-MX SE, BIOS 0304    10/30/2007
      
      This quirk should be removed when `pci=use_crs` is enabled for machines
      from 2006 or earlier or some other solution is implemented.
      
      Using coreboot [1] with this board the problem does not exist but this
      quirk also does not affect it either. To be safe though the check is
      tightened to only take effect when the BIOS from American Megatrends is
      used.
      
              15:13 < ruik> but coreboot does not need that
              15:13 < ruik> because i have there only one root bus
              15:13 < ruik> the audio is behind a bridge
      
              $ sudo dmidecode
              BIOS Information
                      Vendor: American Megatrends Inc.
                      Version: 0304
                      Release Date: 10/30/2007
      
      [1] http://www.coreboot.org/
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=30552
      
      Cc: stable@kernel.org (2.6.34)
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: x86@kernel.org
      Signed-off-by: default avatarPaul Menzel <paulepanter@users.sourceforge.net>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Acked-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      29cf7a30
    • Benjamin Poirier's avatar
      net: fix typos in Documentation/networking/scaling.txt · 186c6bbc
      Benjamin Poirier authored
      The second hunk fixes rps_sock_flow_table but has to re-wrap the paragraph.
      Signed-off-by: default avatarBenjamin Poirier <benjamin.poirier@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      186c6bbc
    • stephen hemminger's avatar
      bridge: leave carrier on for empty bridge · b64b73d7
      stephen hemminger authored
      This resolves a regression seen by some users of bridging.
      Some users use the bridge like a dummy device.
      They expect to be able to put an IPv6 address on the device
      with no ports attached. Although there are better ways of doing
      this, there is no reason to not allow it.
      
      Note: the bridge still will reflect the state of ports in the
      bridge if there are any added.
      Signed-off-by: default avatarStephen Hemminger <shemminger@vyatta.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b64b73d7
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of http://people.redhat.com/agk/git/linux-dm · 6367f177
      Linus Torvalds authored
      * 'for-linus' of http://people.redhat.com/agk/git/linux-dm:
        dm crypt: always disable discard_zeroes_data
        dm: raid fix write_mostly arg validation
        dm table: avoid crash if integrity profile changes
        dm: flakey fix corrupt_bio_byte error path
      6367f177
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://neil.brown.name/md · a7c56eba
      Linus Torvalds authored
      * 'for-linus' of git://neil.brown.name/md:
        md: Avoid waking up a thread after it has been freed.
      a7c56eba
  2. 05 Oct, 2011 8 commits
  3. 04 Oct, 2011 12 commits
  4. 03 Oct, 2011 7 commits