When a CQ-enabled device uses QEBSM for SBAL state inspection,
get_buf_states() can return the PENDING state for an Output Queue.
get_outbound_buffer_frontier() isn't prepared for this, and any PENDING
buffer will permanently stall all further completion processing on this
Queue.

This isn't a concern for non-QEBSM devices, as get_buf_states() for such
devices will manually turn PENDING buffers into EMPTY ones.

Fixes: 104ea556 ("qdio: support asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Get rid of gcc9 warnings like this:

arch/s390/boot/ipl_report.c: In function 'find_bootdata_space':
arch/s390/boot/ipl_report.c:42:26: warning: taking address of packed member of 'struct ipl_rb_components' may result in an unaligned pointer value [-Waddress-of-packed-member]
   42 |  for_each_rb_entry(comp, comps)
      |                          ^~~~~

This is effectively the s390 variant of commit 20c6c189
("x86/boot: Disable the address-of-packed-member compiler warning").
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Add missing parameter description to fix the following warning:
drivers/s390/cio/qdio_thinint.c:183: warning:
Function parameter or member 'floating' not described in 'tiqdio_thinint_handler'
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Within an EP11 cprb there exists a byte field flags. Bit 0x20
of this field indicates a special cprb. A special cprb triggers
special handling in the firmware below the OS layer.

However, a special cprb also needs to have the S bit in GPR0
set when NQAP is called. This was not the case for EP11 cprbs
and this patch now introduces the code to support this.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

__aligned() is a shorthand that is only available in the kernel space
because it is defined in include/linux/compiler_attributes.h, which is
not exported to the user space.

Detected by compile-testing exported headers.

./usr/include/asm/runtime_instr.h:60:37: error: expected declaration specifiers or ‘...’ before numeric constant
 } __attribute__((packed)) __aligned(8);
                                     ^
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a ("driver: base: Disable
   CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
   made default to 'n',
2. It is not recommended (help message: "This should not be used today
   [...] creates a high system load") and was kept only for ancient
   userland,
3. Certain userland specifically requests it to be disabled (systemd
   README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

x86 and powerpc (partially) enforce already CONFIG_HOTPLUG_CPU. On
s390 it is enabled on all distributions by default since ages.
The only exception is our zfcpdump kernel.

However to simplify testing, enforce HOTPLUG_CPU. This was suggested
by Paul McKenney, since his rcutorture test environments for CONFIG_SMP=y
only support HOTPLUG_CPU=y.
Suggested-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

There never have been distributions that shiped with CONFIG_SMP=n for
s390. In addition the kernel currently doesn't even compile with
CONFIG_SMP=n for s390. Most likely it wouldn't even work, even if we
fix the compile error, since nobody tests it, since there is no use
case that I can think of.
Therefore simply enforce CONFIG_SMP and get rid of some more or
less unused code.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Merge tag 'vfio-ccw-20190603' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features

various vfio-ccw fixes (ccw translation, state machine)

Sync with binutils and add a couple of missing instructions.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

randomize_stack_top() checks for current task flag PF_RANDOMIZE in order
to use stack randomization and PF_RANDOMIZE is set when
ADDR_NO_RANDOMIZE is unset, so no need to check for ADDR_NO_RANDOMIZE
in stack_maxrandom_size.

[heiko.carstens@de.ibm.com]: See also commit 01578e36 ("x86/elf:
Remove the unnecessary ADDR_NO_RANDOMIZE checks")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Since commit 4c0f032d ("s390/purgatory: Omit use of bin2c"),
kexec-purgatory.c is not generated.

purgatory and purgatory.lds are generated files, so should be ignored
by git.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

'targets' should be specified to include .*.cmd files to evaluate
if_changed or friends.

Here, facility-defs.h and dis-defs.h are generated by filechk.

Because filechk does not generate .*.cmd file, the 'targets' addition
is meaningless. The filechk correctly updates the target when its
content is changed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

As you can see in scripts/Kbuild.include, the filechk creates the
parent directory of the target as needed.

This Makefile does not need to explicitly create the directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

The top level Makefile adds -Wall globally for all host tools:

  KBUILD_HOSTCFLAGS   := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \

I see two "-Wall" added for compiling these tools.

Of course, it is allowed to pass the same option multiple times, but
we do not need to do so.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

I guess HOSTCFLAGS_gen_opcode_table.o was blindly copied from
HOSTCFLAGS_gen_facilities.o

The reason of adding $(LINUXINCLUDE) to HOSTCFLAGS_gen_facilities.o
is because gen_facilities.c references some CONFIG options. (Kbuild
does not cater to this for host tools automatically.)

On the other hand, gen_opcode_table.c does not reference CONFIG
options at all. So, there is no good reason to pass $(LINUXINCLUDE).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Use the new struct_size() helper to keep code simple.
Signed-off-by: xiaolinkui <xiaolinkui@kylinos.cn>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

The use of stop_machine to replace the mask bits of the jump label branch
is a very heavy-weight operation. This is in fact not necessary, the
mask of the branch can simply be updated, followed by a signal processor
to all the other CPUs to force them to pick up the modified instruction.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[heiko.carstens@de.ibm.com]: Change jump_label_make_nop() so we get
                             brcl 0,offset instead of brcl 0,0. This
                             makes sure that only the mask part of the
                             instruction gets changed when updated.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

If the CCW being processed is a No-Operation, then by definition no
data is being transferred.  Let's fold those checks into the normal
CCW processors, rather than skipping out early.

Likewise, if the CCW being processed is a "test" (a category defined
here as an opcode that contains zero in the lowest four bits) then no
special processing is necessary as far as vfio-ccw is concerned.
These command codes have not been valid since the S/370 days, meaning
they are invalid in the same way as one that ends in an eight [1] or
an otherwise valid command code that is undefined for the device type
in question.  Considering that, let's just process "test" CCWs like
any other CCW, and send everything to the hardware.

[1] POPS states that a x08 is a TIC CCW, and that having any high-order
bits enabled is invalid for format-1 CCWs.  For format-0 CCWs, the
high-order bits are ignored.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-4-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

It is possible that a guest might issue a CCW with a length of zero,
and will expect a particular response.  Consider this chain:

   Address   Format-1 CCW
   --------  -----------------
 0 33110EC0  346022CC 33177468
 1 33110EC8  CF200000 3318300C

CCW[0] moves a little more than two pages, but also has the
Suppress Length Indication (SLI) bit set to handle the expectation
that considerably less data will be moved.  CCW[1] also has the SLI
bit set, and has a length of zero.  Once vfio-ccw does its magic,
the kernel issues a start subchannel on behalf of the guest with this:

   Address   Format-1 CCW
   --------  -----------------
 0 021EDED0  346422CC 021F0000
 1 021EDED8  CF240000 3318300C

Both CCWs were converted to an IDAL and have the corresponding flags
set (which is by design), but only the address of the first data
address is converted to something the host is aware of.  The second
CCW still has the address used by the guest, which happens to be (A)
(probably) an invalid address for the host, and (B) an invalid IDAW
address (doubleword boundary, etc.).

While the I/O fails, it doesn't fail correctly.  In this example, we
would receive a program check for an invalid IDAW address, instead of
a unit check for an invalid command.

To fix this, revert commit 4cebc5d6 ("vfio: ccw: validate the
count field of a ccw before pinning") and allow the individual fetch
routines to process them like anything else.  We'll make a slight
adjustment to our allocation of the pfn_array (for direct CCWs) or
IDAL (for IDAL CCWs) memory, so that we have room for at least one
address even though no guest memory will be pinned and thus the
IDAW will not be populated with a host address.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-3-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

The skip flag of a CCW offers the possibility of data not being
transferred, but is only meaningful for certain commands.
Specifically, it is only applicable for a read, read backward, sense,
or sense ID CCW and will be ignored for any other command code
(SA22-7832-11 page 15-64, and figure 15-30 on page 15-75).

(A sense ID is xE4, while a sense is x04 with possible modifiers in the
upper four bits.  So we will cover the whole "family" of sense CCWs.)

For those scenarios, since there is no requirement for the target
address to be valid, we should skip the call to vfio_pin_pages() and
rely on the IDAL address we have allocated/built for the channel
program.  The fact that the individual IDAWs within the IDAL are
invalid is fine, since they aren't actually checked in these cases.

Set pa_nr to zero when skipping the pfn_array_pin() call, since it is
defined as the number of pages pinned and is used to determine
whether to call vfio_unpin_pages() upon cleanup.

The pfn_array_pin() routine returns the number of pages that were
pinned, but now might be skipped for some CCWs.  Thus we need to
calculate the expected number of pages ourselves such that we are
guaranteed to allocate a reasonable number of IDAWs, which will
provide a valid address in CCW.CDA regardless of whether the IDAWs
are filled in with pinned/translated addresses or not.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-2-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Let's initialize the host address to something that is invalid,
rather than letting it default to zero.  This just makes it easier
to notice when a pin operation has failed or been skipped.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-5-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

The pfn_array_alloc_pin routine is doing too much.  Today, it does the
alloc of the pfn_array struct and its member arrays, builds the iova
address lists out of a contiguous piece of guest memory, and asks vfio
to pin the resulting pages.

Let's effectively revert a significant portion of commit 5c1cfb1c
("vfio: ccw: refactor and improve pfn_array_alloc_pin()") such that we
break pfn_array_alloc_pin() into its component pieces, and have one
routine that allocates/populates the pfn_array structs, and another
that actually pins the memory.  In the future, we will be able to
handle scenarios where pinning memory isn't actually appropriate.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-4-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Otherwise, the guest can believe it's okay to start another I/O
and bump into the non-idle state.  This results in a cc=2 (with
the asynchronous CSCH/HSCH code) returned to the guest, which is
unfortunate since everything is otherwise working normally.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20190514234248.36203-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Per the POPs [1], when processing an interrupt the SCSW.CPA field of an
IRB generally points to 8 bytes after the last CCW that was executed
(there are exceptions, but this is the most common behavior).

In the case of an error, this points us to the first un-executed CCW
in the chain.  But in the case of normal I/O, the address points beyond
the end of the chain.  While the guest generally only cares about this
when possibly restarting a channel program after error recovery, we
should convert the address even in the good scenario so that we provide
a consistent, valid, response upon I/O completion.

[1] Figure 16-6 in SA22-7832-11.  The footnotes in that table also state
that this is true even if the resulting address is invalid or protected,
but moving to the end of the guest chain should not be a surprise.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-2-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Pull x86 fixes from Ingo Molnar:
 "Two fixes: a quirk for KVM guests running on certain AMD CPUs, and a
  KASAN related build fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor
  x86/boot: Provide KASAN compatible aliases for string routines

Pull perf fixes from Ingo Molnar:
 "On the kernel side there's a bunch of ring-buffer ordering fixes for a
  reproducible bug, plus a PEBS constraints regression fix.

  Plus tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools headers UAPI: Sync kvm.h headers with the kernel sources
  perf record: Fix s390 missing module symbol and warning for non-root users
  perf machine: Read also the end of the kernel
  perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms
  perf session: Add missing swap ops for namespace events
  perf namespace: Protect reading thread's namespace
  tools headers UAPI: Sync drm/drm.h with the kernel
  tools headers UAPI: Sync drm/i915_drm.h with the kernel
  tools headers UAPI: Sync linux/fs.h with the kernel
  tools headers UAPI: Sync linux/sched.h with the kernel
  tools arch x86: Sync asm/cpufeatures.h with the with the kernel
  tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls
  perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel
  perf data: Fix 'strncat may truncate' build failure with recent gcc
  perf/ring-buffer: Use regular variables for nesting
  perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data
  perf/ring_buffer: Add ordering to rb->nest increment
  perf/ring_buffer: Fix exposing a temporarily decreased data_head
  perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints

Pull EFI fixes from Ingo Molnar:
 "Two EFI fixes: a quirk for weird systabs, plus add more robust error
  handling in the old 1:1 mapping code"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Allow the number of EFI configuration tables entries to be zero
  efi/x86/Add missing error handling to old_memmap 1:1 mapping code

Pull stacktrace fix from Ingo Molnar:
 "Fix a stack_trace_save_tsk_reliable() regression"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stacktrace: Unbreak stack_trace_save_tsk_reliable()

Pull SPDX fixes from Greg KH:
 "Here are just two small patches, that fix up some found SPDX
  identifier issues.

  The first patch fixes an error in a previous SPDX fixup patch, that
  causes build errors when doing 'make clean' on the tree (the fact that
  almost no one noticed it reflects the fact that kernel developers
  don't like doing that option very often...)

  The second patch fixes up a number of places in the tree where people
  mistyped the string "SPDX-License-Identifier". Given that people can
  not even type their own name all the time without mistakes, this was
  bound to happen, and odds are, we will have to add some type of check
  for this to checkpatch.pl to catch this happening in the future.

  Both of these have passed testing by 0-day"

* tag 'spdx-5.2-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  treewide: fix typos of SPDX-License-Identifier
  crypto: ux500 - fix license comment syntax error

Pull powerpc fixes from Michael Ellerman:
 "A minor fix to our IMC PMU code to print a less confusing error
  message when the driver can't initialise properly.

  A fix for a bug where a user requesting an unsupported branch sampling
  filter can corrupt PMU state, preventing the PMU from counting
  properly.

  And finally a fix for a bug in our support for kexec_file_load(),
  which prevented loading a kernel and initramfs. Most versions of kexec
  don't yet use kexec_file_load().

  Thanks to: Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi
  Bangoria, Thiago Jung Bauermann"

* tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load()
  powerpc/perf: Fix MMCRA corruption by bhrb_filter
  powerpc/powernv: Return for invalid IMC domain

Pull KVM fixes from Paolo Bonzini:
 "Fixes for PPC and s390"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Restore SPRG3 in kvmhv_p9_guest_entry()
  KVM: PPC: Book3S HV: Fix lockdep warning when entering guest on POWER9
  KVM: PPC: Book3S HV: XIVE: Fix page offset when clearing ESB pages
  KVM: PPC: Book3S HV: XIVE: Take the srcu read lock when accessing memslots
  KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts
  KVM: PPC: Book3S HV: XIVE: Introduce a new mutex for the XIVE device
  KVM: PPC: Book3S HV: XIVE: Fix the enforced limit on the vCPU identifier
  KVM: PPC: Book3S HV: XIVE: Do not test the EQ flag validity when resetting
  KVM: PPC: Book3S HV: XIVE: Clear file mapping when device is released
  KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu
  KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list
  KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup
  KVM: PPC: Book3S HV: Avoid touching arch.mmu_ready in XIVE release functions
  KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID
  kvm: fix compile on s390 part 2

Pull i2c fixes from Wolfram Sang:
 "A memleak fix for the core, two driver bugfixes, as well as fixing
  missing file patterns to MAINTAINERS"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: add I2C DT bindings to ARM platforms
  MAINTAINERS: add DT bindings to i2c drivers
  i2c: synquacer: fix synquacer_i2c_doxfer() return value
  i2c: mlxcpld: Fix wrong initialization order in probe
  i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr

Pull thermal SoC fix from Eduardo Valentin:
 "A single revert, detected to cause issues on the tsens driver"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  Revert "drivers: thermal: tsens: Add new operation to check if a sensor is enabled"

Merge tag 'led-fixes-for-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fix from Jacek Anaszewski:
 "Fix for a recent change in LED core, that didn't take into account the
  possibility of calling led_blink_setup() from atomic context"

* tag 'led-fixes-for-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: avoid flush_work in atomic context

Pull block fixes from Jens Axboe:

 - A set of patches fixing code comments / kerneldoc (Bart)

 - Don't allow loop file change for exclusive open (Jan)

 - Fix revalidate of hidden genhd (Jan)

 - Init queue failure memory free fix (Jes)

 - Improve rq limits failure print (John)

 - Fixup for queue removal/addition (Ming)

 - Missed error progagation for io_uring buffer registration (Pavel)

* tag 'for-linus-20190601' of git://git.kernel.dk/linux-block:
  block: print offending values when cloned rq limits are exceeded
  blk-mq: Document the blk_mq_hw_queue_to_node() arguments
  blk-mq: Fix spelling in a source code comment
  block: Fix bsg_setup_queue() kernel-doc header
  block: Fix rq_qos_wait() kernel-doc header
  block: Fix blk_mq_*_map_queues() kernel-doc headers
  block: Fix throtl_pending_timer_fn() kernel-doc header
  block: Convert blk_invalidate_devt() header into a non-kernel-doc header
  block/partitions/ldm: Convert a kernel-doc header into a non-kernel-doc header
  blk-mq: Fix memory leak in error handling
  block: don't protect generic_make_request_checks with blk_queue_enter
  block: move blk_exit_queue into __blk_release_queue
  block: Don't revalidate bdev of hidden gendisk
  loop: Don't change loop device under exclusive opener
  io_uring: Fix __io_uring_register() false success

Pull SCSI fixes from James Bottomley:
 "Six minor fixes to device drivers and one to the multipath alua
  handler.

  The most extensive fix is the zfcp port remove prevention one, but
  it's impact is only s390"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libsas: delete sas port if expander discover failed
  scsi: libsas: only clear phy->in_shutdown after shutdown event done
  scsi: scsi_dh_alua: Fix possible null-ptr-deref
  scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask
  scsi: zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs)
  scsi: zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove
  scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()