- 07 Aug, 2013 19 commits
-
-
Jason Wang authored
To reduce the duplicated codes. Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Signed-off-by:
-
Jason Wang authored
Signed-off-by:
-
Jason Wang authored
To let it be reused and reduce code duplication. Also document this function. Signed-off-by:
-
Jason Wang authored
To let it be reused and reduce code duplication. Signed-off-by:
-
stephen hemminger authored
The IP tunnel hash heads can be embedded in the per-net structure since it is a fixed size. Reduce the size so that the total structure fits in a page size. The original size was overly large, even NETDEV_HASHBITS is only 8 bits! Also, add some white space for readability. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by: Pravin B Shelar <pshelar@nicira.com>. Signed-off-by:
-
Michael Chan authored
and update copyright year. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
WoL and power state changes will now be done in the shutdown handler. open/close/ethtool will no longer change the power state. NVRAM operations can now be permitted whether the device is up or down. Signed-off-by:
-
Michael Chan authored
This simplifies the suspend/resume code. Signed-off-by:
-
Michael Chan authored
Separate MAC and PHY WoL setup code into a separate function. Signed-off-by:
-
Michael Chan authored
Simple API changes with no functional changes. Signed-off-by:
Michael Chan <mchan@broadocm.com> Signed-off-by:
-
Michael Chan authored
by closing the device if necessary. Otherwise, since NAPI state is already disabled, a subsequent close will hang the system. Signed-off-by:
-
Sathya Perla authored
Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Vasundhara Volam authored
Uninitialized value was being returned in the non-failure case. Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
-
Vasundhara Volam authored
Log the event type for unknown async events Signed-off-by:
-
Vasundhara Volam authored
The BE2 FW GET_PHY_DETAILS cmd does not return fixed speeds supported. Signed-off-by:
-
Vasundhara Volam authored
For SH-R and Lancer-R, use the FW supported values for Max unicast MACs, Max VLANs and Max multicast MACs. Signed-off-by:
-
Vasundhara Volam authored
This is a chip wide value and the PFs already report it. Signed-off-by:
-
Vasundhara Volam authored
The new speeds are supported by variants of the Skyhawk-R chip. Signed-off-by:
-
- 05 Aug, 2013 14 commits
-
-
Claudiu Manoil authored
Cleanup gfar_start_xmit()'s fast path by factoring out "redundant" FCB insertion code (repeated gfar_add_fcb() calls and related) and by reducing the number of if() clauses (i.e. if(fcb) checks). Improve maintainability (e.g. there's less code and easier to read) also by introducing do_csum and do_vlan to mark the other 2 Tx TOE functionalities, following the same model as do_tstamp. fcb_len may also be 0 now, to mark that Tx FCB insertion conditions (do_csum, do_vlan, do_tstamp) have not been met. Signed-off-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Claudiu Manoil authored
Both [eTSEC76] and [eTSEC12] errata relate to Tx checksum generation (for some MPC83xx and MCP8548 older revisions). They require the same workaround: manual checksum computation and insertion, and disabling the H/W Tx csum acceleration feature (per frame) through Tx FCB (Frame Control Block) csum offload settings. The workaround for [eTSEC76] needs to be fixed because it currently fails to disable H/W Tx csum insertion via FCB. This patch fixes it and provides a common workaround implementation for both Tx csum errata. Signed-off-by:
-
Veaceslav Falico authored
We're already protected by RTNL lock, so nothing can happen to bond/its slaves, and thus the locking is useless here (both bond->lock and bond->curr_active_slave). Also, add ASSERT_RTNL() both to bond_set_rx_mode() and bond_hw_addr_swap() to catch possible uses of it without RTNL locking. This patch also saves us from a lockdep false-positive in bond_set_rx_mode() vs bond_hw_addr_swap(). CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
Mugunthan V N authored
The new IP version has a minor changes and the offsets are same as the previous version, so adding new IP version support in the driver. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
fan.du authored
As dst_cookie is used in fast path sctp_transport_dst_check. Before: struct sctp_transport { struct list_head transports; /* 0 16 */ atomic_t refcnt; /* 16 4 */ __u32 dead:1; /* 20:31 4 */ __u32 rto_pending:1; /* 20:30 4 */ __u32 hb_sent:1; /* 20:29 4 */ __u32 pmtu_pending:1; /* 20:28 4 */ /* XXX 28 bits hole, try to pack */ __u32 sack_generation; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ struct flowi fl; /* 32 64 */ /* --- cacheline 1 boundary (64 bytes) was 32 bytes ago --- */ union sctp_addr ipaddr; /* 96 28 */ After: struct sctp_transport { struct list_head transports; /* 0 16 */ atomic_t refcnt; /* 16 4 */ __u32 dead:1; /* 20:31 4 */ __u32 rto_pending:1; /* 20:30 4 */ __u32 hb_sent:1; /* 20:29 4 */ __u32 pmtu_pending:1; /* 20:28 4 */ /* XXX 28 bits hole, try to pack */ __u32 sack_generation; /* 24 4 */ u32 dst_cookie; /* 28 4 */ struct flowi fl; /* 32 64 */ /* --- cacheline 1 boundary (64 bytes) was 32 bytes ago --- */ union sctp_addr ipaddr; /* 96 28 */ Signed-off-by:Fan Du <fan.du@windriver.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Veaceslav Falico authored
Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Veaceslav Falico authored
Simple cleanup to not call slave_last_rx() on every time function. It won't give any measurable boost - but looks cleaner and easier to understand. There are no time-consuming functions in between these calls, so it's safe to call it in the beginning only once. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Wei Yongjun authored
Add the missing unlock before return from function tile_net_open() in the error handling case. Introduced by commit f3286a3a. (tile: support multiple mPIPE shims in tilegx network driver) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Jingoo Han authored
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/mellanox/mlx4/cmd.c:803:5: warning: symbol 'MLX4_CMD_UPDATE_QP_wrapper' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlx4/cmd.c:812:5: warning: symbol 'MLX4_CMD_GET_OP_REQ_wrapper' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlx4/cmd.c:1547:5: warning: symbol 'mlx4_master_immediate_activate_vlan_qos' was not declared. Should it be static? Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Acked-By:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Jingoo Han authored
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/micrel/ks8842.c:708:6: warning: symbol 'ks8842_handle_rx' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8842.c:718:6: warning: symbol 'ks8842_handle_tx' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8842.c:727:6: warning: symbol 'ks8842_handle_rx_overrun' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8842.c:735:6: warning: symbol 'ks8842_tasklet' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8851_mll.c:691:6: warning: symbol 'ks_enable_qmu' was not declared. Should it be static? Signed-off-by:
-
Jingoo Han authored
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/emulex/benet/be_main.c:475:6: warning: symbol 'populate_erx_stats' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:1485:6: warning: symbol 'be_rx_compl_process_gro' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:2262:5: warning: symbol 'be_poll' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3223:6: warning: symbol 'flash_cookie' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3280:27: warning: symbol 'get_fsec_info' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1013:5: warning: symbol 'be_cmd_mccq_ext_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1071:5: warning: symbol 'be_cmd_mccq_org_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3166:5: warning: symbol 'be_cmd_get_profile_config_mbox' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3194:5: warning: symbol 'be_cmd_get_profile_config_mccq' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:96:6: warning: symbol '_be_roce_dev_remove' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:113:6: warning: symbol '_be_roce_dev_open' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:129:6: warning: symbol '_be_roce_dev_close' was not declared. Should it be static? Signed-off-by:
-
Jingoo Han authored
bna_rx_sm_stop_wait_entry(), bna_rx_sm_rxf_stop_wait_entry(), bna_rx_sm_started_entry(), bna_rx_sm_cleanup_wait_entry(), and bna_rx_sm_cleanup_wait() are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1423:1: warning: symbol 'bna_rx_sm_stop_wait_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1476:1: warning: symbol 'bna_rx_sm_rxf_stop_wait_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1532:1: warning: symbol 'bna_rx_sm_started_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1597:1: warning: symbol 'bna_rx_sm_cleanup_wait_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1602:1: warning: symbol 'bna_rx_sm_cleanup_wait' was not declared. Should it be static? Signed-off-by:
-
stephen hemminger authored
Vxlan remote list is protected by RCU and guaranteed to be non-empty. Split out the rcu and non-rcu access to the list to fix warning Signed-off-by:
-
stephen hemminger authored
Use of RCU here with out marked pointer and function doesn't match prototype with sparse. Signed-off-by:
-
- 04 Aug, 2013 2 commits
-
-
Eric Dumazet authored
ax88179_tx_fixup() has quite complex code trying to push 8 bytes of control data (len/mss), but fails to do it properly for TCP packets, incurring an extra copy and point of memory allocation failure. Lets use the simple and approved way. dev->needed_headroom being 8, all frames should have 8 bytes of headroom, so the extra copy should be unlikely anyway. This patch should improve performance for TCP xmits. Reported-by:
Ming Lei <ming.lei@canonical.com> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Merge net into net-next to setup some infrastructure Eric Dumazet needs for usbnet changes. Signed-off-by:
-
- 03 Aug, 2013 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ... -
Himanshu Madhani authored
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Rajesh Borundia authored
o Set link speed and duplex to unknown when link is not up. Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
-
Rajesh Borundia authored
o Do not obtain link speed from register when adapter link is down. Signed-off-by:
-
Shahed Shaikh authored
Driver was not handling external loopback diagnostic test request. Signed-off-by:
-
