- 14 Jul, 2019 1 commit
-
-
Eric Biggers authored
commit 20a0f976 upstream. Commit c778f96b ("crypto: lrw - Optimize tweak computation") incorrectly reduced the alignmask of LRW instances from '__alignof__(u64) - 1' to '__alignof__(__be32) - 1'. However, xor_tweak() and setkey() assume that the data and key, respectively, are aligned to 'be128', which has u64 alignment. Fix the alignmask to be at least '__alignof__(be128) - 1'. Fixes: c778f96b ("crypto: lrw - Optimize tweak computation") Cc: <stable@vger.kernel.org> # v4.20+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 Jul, 2019 39 commits
-
-
Greg Kroah-Hartman authored
-
Roman Bolshakov authored
commit 5676234f upstream. WRITE SAME corrupts data on the block device behind iblock if the command is emulated. The emulation code issues (M - 1) * N times more bios than requested, where M is the number of 512 blocks per real block size and N is the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a device with 4k blocks, 7 * N more LBAs gets written after the requested range. The issue happens because the number of 512 byte sectors to be written is decreased one by one while the real bios are typically from 1 to 8 512 byte sectors per bio. Fixes: c66ac9db ("[SCSI] target: Add LIO target core v4.0.0-rc6") Cc: <stable@vger.kernel.org> Signed-off-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 75f2d86b upstream. CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser tables are vaguely sane. It was set to default to 'Y' for the moment to catch errors in upcoming fs conversion development. Make sure it is not enabled by default in the final release of v5.1. Fixes: 31d921c7 ("vfs: Add configuration parser helpers") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dan Carpenter authored
commit 4c89cc73 upstream. The "pending" variable was a u32 but we cast it to an unsigned long pointer when we do the for_each_set_bit() loop. The problem is that on big endian 64bit systems that results in an out of bounds read. Fixes: 4e4106f5 ("dmaengine: jz4780: Fix transfers being ACKed too soon") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Robin Gong authored
commit 3f93a4f2 upstream. It is possible for an irq triggered by channel0 to be received later after clks are disabled once firmware loaded during sdma probe. If that happens then clearing them by writing to SDMA_H_INTR won't work and the kernel will hang processing infinite interrupts. Actually, don't need interrupt triggered on channel0 since it's pollling SDMA_H_STATSTOP to know channel0 done rather than interrupt in current code, just clear BD_INTR to disable channel0 interrupt to avoid the above case. This issue was brought by commit 1d069bfa ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") which didn't take care the above case. Fixes: 1d069bfa ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") Cc: stable@vger.kernel.org #5.0+ Signed-off-by:
Robin Gong <yibin.gong@nxp.com> Reported-by:
Sven Van Asbroeck <thesven73@gmail.com> Tested-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
-
Sricharan R authored
commit f6034225 upstream. One space is left unused in circular FIFO to differentiate 'full' and 'empty' cases. So take that in to account while counting for the descriptors completed. Fixes the issue reported here, https://lkml.org/lkml/2019/6/18/669 Cc: stable@vger.kernel.org Reported-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Sricharan R <sricharan@codeaurora.org> Tested-by:
-
Cedric Hombourger authored
commit 637dfa0f upstream. scripts/package/builddeb calls "make dtbs_install" after executing a plain make (i.e. no build targets specified). It will fail if dtbs were not built beforehand. Match the arm64 architecture where DTBs get built by the "all" target. Signed-off-by:
Cedric Hombourger <Cedric_Hombourger@mentor.com> [paul.burton@mips.com: s/builddep/builddeb] Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
-
Dmitry Korotin authored
commit 0b24cae4 upstream. Add a missing EHB (Execution Hazard Barrier) in mtc0 -> mfc0 sequence. Without this execution hazard barrier it's possible for the value read back from the KScratch register to be the value from before the mtc0. Reproducible on P5600 & P6600. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register Signed-off-by:
Dmitry Korotin <dkorotin@wavecomp.com> [paul.burton@mips.com: - Commit message tweaks. - Add Fixes tags. - Mark for stable back to v3.15 where P5600 support was introduced.] Signed-off-by:
-
Hauke Mehrtens authored
commit d6ed083f upstream. The bounds check used the uninitialized variable vaddr, it should use the given parameter kaddr instead. When using the uninitialized value the compiler assumed it to be 0 and optimized this function to just return 0 in all cases. This should make the function check the range of the given address and only do the page map check in case it is in the expected range of virtual addresses. Fixes: 074a1e11 ("MIPS: Bounds check virt_addr_valid") Cc: stable@vger.kernel.org # v4.12+ Cc: Paul Burton <paul.burton@mips.com> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Chuck Lever authored
commit 1e091c3b upstream. The DRC appears to be effectively empty after an RPC/RDMA transport reconnect. The problem is that each connection uses a different source port, which defeats the DRC hash. Clients always have to disconnect before they send retransmissions to reset the connection's credit accounting, thus every retransmit on NFS/RDMA will miss the DRC. An NFS/RDMA client's IP source port is meaningless for RDMA transports. The transport layer typically sets the source port value on the connection to a random ephemeral port. The server already ignores it for the "secure port" check. See commit 16e4d93f ("NFSD: Ignore client's source port on RDMA transports"). The Linux NFS server's DRC resolves XID collisions from the same source IP address by using the checksum of the first 200 bytes of the RPC call header. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Paul Menzel authored
commit 3b2d4dcf upstream. Since commit 10a68cdf (nfsd: fix performance-limiting session calculation) (Linux 5.1-rc1 and 4.19.31), shares from NFS servers with 1 TB of memory cannot be mounted anymore. The mount just hangs on the client. The gist of commit 10a68cdf is the change below. -avail = clamp_t(int, avail, slotsize, avail/3); +avail = clamp_t(int, avail, slotsize, total_avail/3); Here are the macros. #define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <) #define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi) `total_avail` is 8,434,659,328 on the 1 TB machine. `clamp_t()` casts the values to `int`, which for 32-bit integers can only hold values −2,147,483,648 (−2^31) through 2,147,483,647 (2^31 − 1). `avail` (in the function signature) is just 65536, so that no overflow was happening. Before the commit the assignment would result in 21845, and `num = 4`. When using `total_avail`, it is causing the assignment to be 18446744072226137429 (printed as %lu), and `num` is then 4164608182. My next guess is, that `nfsd_drc_mem_used` is then exceeded, and the server thinks there is no memory available any more for this client. Updating the arguments of `clamp_t()` and `min_t()` to `unsigned long` fixes the issue. Now, `avail = 65536` (before commit 10a68cdf `avail = 21845`), but `num = 4` remains the same. Fixes: c54f24e3 (nfsd: fix performance-limiting session calculation) Cc: stable@vger.kernel.org Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Wanpeng Li authored
commit bb34e690 upstream. Thomas reported that: | Background: | | In preparation of supporting IPI shorthands I changed the CPU offline | code to software disable the local APIC instead of just masking it. | That's done by clearing the APIC_SPIV_APIC_ENABLED bit in the APIC_SPIV | register. | | Failure: | | When the CPU comes back online the startup code triggers occasionally | the warning in apic_pending_intr_clear(). That complains that the IRRs | are not empty. | | The offending vector is the local APIC timer vector who's IRR bit is set | and stays set. | | It took me quite some time to reproduce the issue locally, but now I can | see what happens. | | It requires apicv_enabled=0, i.e. full apic emulation. With apicv_enabled=1 | (and hardware support) it behaves correctly. | | Here is the series of events: | | Guest CPU | | goes down | | native_cpu_disable() | | apic_soft_disable(); | | play_dead() | | .... | | startup() | | if (apic_enabled()) | apic_pending_intr_clear() <- Not taken | | enable APIC | | apic_pending_intr_clear() <- Triggers warning because IRR is stale | | When this happens then the deadline timer or the regular APIC timer - | happens with both, has fired shortly before the APIC is disabled, but the | interrupt was not serviced because the guest CPU was in an interrupt | disabled region at that point. | | The state of the timer vector ISR/IRR bits: | | ISR IRR | before apic_soft_disable() 0 1 | after apic_soft_disable() 0 1 | | On startup 0 1 | | Now one would assume that the IRR is cleared after the INIT reset, but this | happens only on CPU0. | | Why? | | Because our CPU0 hotplug is just for testing to make sure nothing breaks | and goes through an NMI wakeup vehicle because INIT would send it through | the boots-trap code which is not really working if that CPU was not | physically unplugged. | | Now looking at a real world APIC the situation in that case is: | | ISR IRR | before apic_soft_disable() 0 1 | after apic_soft_disable() 0 1 | | On startup 0 0 | | Why? | | Once the dying CPU reenables interrupts the pending interrupt gets | delivered as a spurious interupt and then the state is clear. | | While that CPU0 hotplug test case is surely an esoteric issue, the APIC | emulation is still wrong, Even if the play_dead() code would not enable | interrupts then the pending IRR bit would turn into an ISR .. interrupt | when the APIC is reenabled on startup. From SDM 10.4.7.2 Local APIC State After It Has Been Software Disabled * Pending interrupts in the IRR and ISR registers are held and require masking or handling by the CPU. In Thomas's testing, hardware cpu will not respect soft disable LAPIC when IRR has already been set or APICv posted-interrupt is in flight, so we can skip soft disable APIC checking when clearing IRR and set ISR, continue to respect soft disable APIC when attempting to set IRR. Reported-by:
Rong Chen <rong.a.chen@intel.com> Reported-by:
Feng Tang <feng.tang@intel.com> Reported-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 3f16a5c3 upstream. This warning can be triggered easily by userspace, so it should certainly not cause a panic if panic_on_warn is set. Reported-by: syzbot+c03f30b4f4c46bdf8575@syzkaller.appspotmail.com Suggested-by:
Alexander Potapenko <glider@google.com> Acked-by:
-
Martin Schwidefsky authored
[ Upstream commit c9f62152 ] With git commit d1874a0c "s390/mm: make the pxd_offset functions more robust" and a 2-level page table it can now happen that pgd_bad() gets asked to verify a large segment table entry. If the entry is marked as dirty pgd_bad() will incorrectly return true. Change the pgd_bad(), p4d_bad(), pud_bad() and pmd_bad() functions to first verify the table type, return false if the table level is lower than what the function is suppossed to check, return true if the table level is too high, and otherwise check the relevant region and segment table bits. pmd_bad() has to check against ~SEGMENT_ENTRY_BITS for normal page table pointers or ~SEGMENT_ENTRY_BITS_LARGE for large segment table entries. Same for pud_bad() which has to check against ~_REGION_ENTRY_BITS or ~_REGION_ENTRY_BITS_LARGE. Fixes: d1874a0c ("s390/mm: make the pxd_offset functions more robust") Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Linus Torvalds authored
[ Upstream commit 423ea325 ] Make the forward declaration actually match the real function definition, something that previous versions of gcc had just ignored. This is another patch to fix new warnings from gcc-9 before I start the merge window pulls. I don't want to miss legitimate new warnings just because my system update brought a new compiler with new warnings. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Nikolay Borisov authored
commit debd1c06 upstream. Recent FITRIM work, namely bbbf7243 ("btrfs: combine device update operations during transaction commit") combined the way certain operations are recoded in a transaction. As a result an ASSERT was added in dev_replace_finish to ensure the new code works correctly. Unfortunately I got reports that it's possible to trigger the assert, meaning that during a device replace it's possible to have an unfinished chunk allocation on the source device. This is supposed to be prevented by the fact that a transaction is committed before finishing the replace oepration and alter acquiring the chunk mutex. This is not sufficient since by the time the transaction is committed and the chunk mutex acquired it's possible to allocate a chunk depending on the workload being executed on the replaced device. This bug has been present ever since device replace was introduced but there was never code which checks for it. The correct way to fix is to ensure that there is no pending device modification operation when the chunk mutex is acquire and if there is repeat transaction commit. Unfortunately it's not possible to just exclude the source device from btrfs_fs_devices::dev_alloc_list since this causes ENOSPC to be hit in transaction commit. Fixing that in another way would need to add special cases to handle the last writes and forbid new ones. The looped transaction fix is more obvious, and can be easily backported. The runtime of dev-replace is long so there's no noticeable delay caused by that. Reported-by:
David Sterba <dsterba@suse.com> Fixes: 391cd9df ("Btrfs: fix unprotected alloc list insertion during the finishing procedure of replace") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Shakeel Butt authored
commit dffcac2c upstream. In production we have noticed hard lockups on large machines running large jobs due to kswaps hoarding lru lock within isolate_lru_pages when sc->reclaim_idx is 0 which is a small zone. The lru was couple hundred GiBs and the condition (page_zonenum(page) > sc->reclaim_idx) in isolate_lru_pages() was basically skipping GiBs of pages while holding the LRU spinlock with interrupt disabled. On further inspection, it seems like there are two issues: (1) If kswapd on the return from balance_pgdat() could not sleep (i.e. node is still unbalanced), the classzone_idx is unintentionally set to 0 and the whole reclaim cycle of kswapd will try to reclaim only the lowest and smallest zone while traversing the whole memory. (2) Fundamentally isolate_lru_pages() is really bad when the allocation has woken kswapd for a smaller zone on a very large machine running very large jobs. It can hoard the LRU spinlock while skipping over 100s of GiBs of pages. This patch only fixes (1). (2) needs a more fundamental solution. To fix (1), in the kswapd context, if pgdat->kswapd_classzone_idx is invalid use the classzone_idx of the previous kswapd loop otherwise use the one the waker has requested. Link: http://lkml.kernel.org/r/20190701201847.251028-1-shakeelb@google.com Fixes: e716f2eb ("mm, vmscan: prevent kswapd sleeping prematurely due to mismatched classzone_idx") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Yang Shi <yang.shi@linux.alibaba.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hdanton@sina.com> Cc: Roman Gushchin <guro@fb.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Petr Mladek authored
commit d5b844a2 upstream. The commit 9f255b63 ("module: Fix livepatch/ftrace module text permissions race") causes a possible deadlock between register_kprobe() and ftrace_run_update_code() when ftrace is using stop_machine(). The existing dependency chain (in reverse order) is: -> #1 (text_mutex){+.+.}: validate_chain.isra.21+0xb32/0xd70 __lock_acquire+0x4b8/0x928 lock_acquire+0x102/0x230 __mutex_lock+0x88/0x908 mutex_lock_nested+0x32/0x40 register_kprobe+0x254/0x658 init_kprobes+0x11a/0x168 do_one_initcall+0x70/0x318 kernel_init_freeable+0x456/0x508 kernel_init+0x22/0x150 ret_from_fork+0x30/0x34 kernel_thread_starter+0x0/0xc -> #0 (cpu_hotplug_lock.rw_sem){++++}: check_prev_add+0x90c/0xde0 validate_chain.isra.21+0xb32/0xd70 __lock_acquire+0x4b8/0x928 lock_acquire+0x102/0x230 cpus_read_lock+0x62/0xd0 stop_machine+0x2e/0x60 arch_ftrace_update_code+0x2e/0x40 ftrace_run_update_code+0x40/0xa0 ftrace_startup+0xb2/0x168 register_ftrace_function+0x64/0x88 klp_patch_object+0x1a2/0x290 klp_enable_patch+0x554/0x980 do_one_initcall+0x70/0x318 do_init_module+0x6e/0x250 load_module+0x1782/0x1990 __s390x_sys_finit_module+0xaa/0xf0 system_call+0xd8/0x2d0 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(text_mutex); lock(cpu_hotplug_lock.rw_sem); lock(text_mutex); lock(cpu_hotplug_lock.rw_sem); It is similar problem that has been solved by the commit 2d1e38f5 ("kprobes: Cure hotplug lock ordering issues"). Many locks are involved. To be on the safe side, text_mutex must become a low level lock taken after cpu_hotplug_lock.rw_sem. This can't be achieved easily with the current ftrace design. For example, arm calls set_all_modules_text_rw() already in ftrace_arch_code_modify_prepare(), see arch/arm/kernel/ftrace.c. This functions is called: + outside stop_machine() from ftrace_run_update_code() + without stop_machine() from ftrace_module_enable() Fortunately, the problematic fix is needed only on x86_64. It is the only architecture that calls set_all_modules_text_rw() in ftrace path and supports livepatching at the same time. Therefore it is enough to move text_mutex handling from the generic kernel/trace/ftrace.c into arch/x86/kernel/ftrace.c: ftrace_arch_code_modify_prepare() ftrace_arch_code_modify_post_process() This patch basically reverts the ftrace part of the problematic commit 9f255b63 ("module: Fix livepatch/ftrace module text permissions race"). And provides x86_64 specific-fix. Some refactoring of the ftrace code will be needed when livepatching is implemented for arm or nds32. These architectures call set_all_modules_text_rw() and use stop_machine() at the same time. Link: http://lkml.kernel.org/r/20190627081334.12793-1-pmladek@suse.com Fixes: 9f255b63 ("module: Fix livepatch/ftrace module text permissions race") Acked-by:
Miroslav Benes <mbenes@suse.cz> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> [ As reviewed by Miroslav Benes <mbenes@suse.cz>, removed return value of ftrace_run_update_code() as it is a void function. ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Robert Beckett authored
commit 5aeab2bf upstream. The event will be sent as part of the vblank enable during the modeset if the crtc is not being kept disabled. Fixes: 5f2f9115 ("drm/imx: atomic phase 3 step 1: Use atomic configuration") Signed-off-by:
Robert Beckett <bob.beckett@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Robert Beckett authored
commit 78c68e8f upstream. Notify drm core before sending pending events during crtc disable. This fixes the first event after disable having an old stale timestamp by having drm_crtc_vblank_off update the timestamp to now. This was seen while debugging weston log message: Warning: computed repaint delay is insane: -8212 msec This occurred due to: 1. driver starts up 2. fbcon comes along and restores fbdev, enabling vblank 3. vblank_disable_fn fires via timer disabling vblank, keeping vblank seq number and time set at current value (some time later) 4. weston starts and does a modeset 5. atomic commit disables crtc while it does the modeset 6. ipu_crtc_atomic_disable sends vblank with old seq number and time Fixes: a4744786 ("drm/imx: fix crtc vblank state regression") Signed-off-by:
-
Lucas Stach authored
commit be132e13 upstream. When something goes wrong in the GPU init after the cmdbuf suballocator has been constructed, we fail to destroy it properly. This causes havok later when the GPU is unbound due to a module unload or similar. Fixes: e66774dd (drm/etnaviv: add cmdbuf suballocator) Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Gerd Hoffmann authored
commit 41de4be6 upstream. drm_connector_update_edid_property can sleep, we must not call it while holding a spinlock. Move the callsite. Fixes: b4b01b49 ("drm/virtio: add edid support") Reported-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Tested-by:
Cornelia Huck <cohuck@redhat.com> Acked-by:
-
Alex Deucher authored
commit 25f09f85 upstream. Recommended by the hw team. Reviewed-and-Tested-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Lyude Paul authored
commit 688f3d1e upstream. I'm not entirely sure why this is, but for some reason: 921935dc ("drm/amd/powerplay: enforce display related settings only on needed") Breaks runtime PM resume on the Radeon PRO WX 3100 (Lexa) in one the pre-production laptops I have. The issue manifests as the following messages in dmesg: [drm] UVD and UVD ENC initialized successfully. amdgpu 0000:3b:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vce1 test failed (-110) [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vce_v3_0> failed -110 [drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-110). And happens after about 6-10 runtime PM suspend/resume cycles (sometimes sooner, if you're lucky!). Unfortunately I can't seem to pin down precisely which part in psm_adjust_power_state_dynamic that is causing the issue, but not skipping the display setting setup seems to fix it. Hopefully if there is a better fix for this, this patch will spark discussion around it. Fixes: 921935dc ("drm/amd/powerplay: enforce display related settings only on needed") Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Rex Zhu <Rex.Zhu@amd.com> Cc: Likun Gao <Likun.Gao@amd.com> Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Evan Quan authored
commit f78c581e upstream. Otherwise, you may get divided-by-zero error or corrput the SMU fan control feature. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Slava Abramov <slava.abramov@amd.com> Acked-by:
-
Chris Wilson authored
commit c84c9029 upstream. Despite what I think the prm recommends, commit f2253bd9 ("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context") turned out to be a huge mistake when enabling Ironlake contexts as the GPU would hang on either a MI_FLUSH or PIPE_CONTROL immediately following the MI_SET_CONTEXT of an active mesa context (more vanilla contexts, e.g. simple rendercopies with igt, do not suffer). Ville found the following clue, "[DevCTG+]: For the invalidate operation of the pipe control, the following pointers are affected. The invalidate operation affects the restore of these packets. If the pipe control invalidate operation is completed before the context save, the indirect pointers will not be restored from memory. 1. Pipeline State Pointer 2. Media State Pointer 3. Constant Buffer Packet" which suggests by us emitting the INVALIDATE prior to the MI_SET_CONTEXT, we prevent the context-restore from chasing the dangling pointers within the image, and explains why this likely prevents the GPU hang. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419111749.3910-1-chris@chris-wilson.co.uk (cherry picked from commit 928f8f42 in drm-intel-next) Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111014 Fixes: f2253bd9 ("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context") Signed-off-by:
-
Ard Biesheuvel authored
commit 6f496a55 upstream. When KASLR and KASAN are both enabled, we keep the modules where they are, and randomize the placement of the kernel so it is within 2 GB of the module region. The reason for this is that putting modules in the vmalloc region (like we normally do when KASLR is enabled) is not possible in this case, given that the entire vmalloc region is already backed by KASAN zero shadow pages, and so allocating dedicated KASAN shadow space as required by loaded modules is not possible. The default module allocation window is set to [_etext - 128MB, _etext] in kaslr.c, which is appropriate for KASLR kernels booted without a seed or with 'nokaslr' on the command line. However, as it turns out, it is not quite correct for the KASAN case, since it still intersects the vmalloc region at the top, where attempts to allocate shadow pages will collide with the KASAN zero shadow pages, causing a WARN() and all kinds of other trouble. So cap the top end to MODULES_END explicitly when running with KASAN. Cc: <stable@vger.kernel.org> # 4.9+ Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Joshua Scott authored
commit 80031361 upstream. Switch to the "marvell,armada-38x-uart" driver variant to empty the UART buffer before writing to the UART_LCR register. Signed-off-by:
Joshua Scott <joshua.scott@alliedtelesis.co.nz> Tested-by:
Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>. Cc: stable@vger.kernel.org Fixes: 43e28ba8 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236") Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Eiichi Tsukata authored
commit 46cc0b44 upstream. Current snapshot implementation swaps two ring_buffers even though their sizes are different from each other, that can cause an inconsistency between the contents of buffer_size_kb file and the current buffer size. For example: # cat buffer_size_kb 7 (expanded: 1408) # echo 1 > events/enable # grep bytes per_cpu/cpu0/stats bytes: 1441020 # echo 1 > snapshot // current:1408, spare:1408 # echo 123 > buffer_size_kb // current:123, spare:1408 # echo 1 > snapshot // current:1408, spare:123 # grep bytes per_cpu/cpu0/stats bytes: 1443700 # cat buffer_size_kb 123 // != current:1408 And also, a similar per-cpu case hits the following WARNING: Reproducer: # echo 1 > per_cpu/cpu0/snapshot # echo 123 > buffer_size_kb # echo 1 > per_cpu/cpu0/snapshot WARNING: WARNING: CPU: 0 PID: 1946 at kernel/trace/trace.c:1607 update_max_tr_single.part.0+0x2b8/0x380 Modules linked in: CPU: 0 PID: 1946 Comm: bash Not tainted 5.2.0-rc6 #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 RIP: 0010:update_max_tr_single.part.0+0x2b8/0x380 Code: ff e8 dc da f9 ff 0f 0b e9 88 fe ff ff e8 d0 da f9 ff 44 89 ee bf f5 ff ff ff e8 33 dc f9 ff 41 83 fd f5 74 96 e8 b8 da f9 ff <0f> 0b eb 8d e8 af da f9 ff 0f 0b e9 bf fd ff ff e8 a3 da f9 ff 48 RSP: 0018:ffff888063e4fca0 EFLAGS: 00010093 RAX: ffff888066214380 RBX: ffffffff99850fe0 RCX: ffffffff964298a8 RDX: 0000000000000000 RSI: 00000000fffffff5 RDI: 0000000000000005 RBP: 1ffff1100c7c9f96 R08: ffff888066214380 R09: ffffed100c7c9f9b R10: ffffed100c7c9f9a R11: 0000000000000003 R12: 0000000000000000 R13: 00000000ffffffea R14: ffff888066214380 R15: ffffffff99851060 FS: 00007f9f8173c700(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000714dc0 CR3: 0000000066fa6000 CR4: 00000000000006f0 Call Trace: ? trace_array_printk_buf+0x140/0x140 ? __mutex_lock_slowpath+0x10/0x10 tracing_snapshot_write+0x4c8/0x7f0 ? trace_printk_init_buffers+0x60/0x60 ? selinux_file_permission+0x3b/0x540 ? tracer_preempt_off+0x38/0x506 ? trace_printk_init_buffers+0x60/0x60 __vfs_write+0x81/0x100 vfs_write+0x1e1/0x560 ksys_write+0x126/0x250 ? __ia32_sys_read+0xb0/0xb0 ? do_syscall_64+0x1f/0x390 do_syscall_64+0xc1/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe This patch adds resize_buffer_duplicate_size() to check if there is a difference between current/spare buffer sizes and resize a spare buffer if necessary. Link: http://lkml.kernel.org/r/20190625012910.13109-1-devel@etsukata.com Cc: stable@vger.kernel.org Fixes: ad909e21 ("tracing: Add internal tracing_snapshot() functions") Signed-off-by:
Eiichi Tsukata <devel@etsukata.com> Signed-off-by:
-
Oleg Nesterov authored
commit 87518530 upstream. swap_readpage() sets waiter = bio->bi_private even if synchronous = F, this means that the caller can get the spurious wakeup after return. This can be fatal if blk_wake_io_task() does set_current_state(TASK_RUNNING) after the caller does set_special_state(), in the worst case the kernel can crash in do_task_dead(). Link: http://lkml.kernel.org/r/20190704160301.GA5956@redhat.com Fixes: 0619317f ("block: add polled wakeup task helper") Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Qian Cai <cai@lca.pw> Acked-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Eric Biggers authored
commit cbcfa130 upstream. When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e ("aio: implement IOCB_CMD_POLL") Signed-off-by:
-
Herbert Xu authored
commit c8ea9fce upstream. Sometimes mpi_powm will leak karactx because a memory allocation failure causes a bail-out that skips the freeing of karactx. This patch moves the freeing of karactx to the end of the function like everything else so that it can't be skipped. Reported-by: syzbot+f7baccc38dcc1e094e77@syzkaller.appspotmail.com Fixes: cdec9cb5 ("crypto: GnuPG based MPI lib - source files...") Cc: <stable@vger.kernel.org> Signed-off-by:
Eric Biggers <ebiggers@kernel.org> Signed-off-by:
-
Jan Kara authored
commit 1571c029 upstream. When inserting entry into xarray, we store mapping and index in corresponding struct pages for memory error handling. When it happened that one process was mapping file at PMD granularity while another process at PTE granularity, we could wrongly deassociate PMD range and then reassociate PTE range leaving the rest of struct pages in PMD range without mapping information which could later cause missed notifications about memory errors. Fix the problem by calling the association / deassociation code if and only if we are really going to update the xarray (deassociating and associating zero or empty entries is just no-op so there's no reason to complicate the code with trying to avoid the calls for these cases). Cc: <stable@vger.kernel.org> Fixes: d2c997c0 ("fs, dax: use page->mapping to warn if truncate...") Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dennis Wassenberg authored
commit bef33e19 upstream. On M710q Lenovo ThinkCentre machine, there are two front mics, we change the location for one of them to avoid conflicts. Signed-off-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Richard Sailer authored
commit 503d90b3 upstream. This adds 4 SND_PCI_QUIRK(...) lines for several barebone models of the ODM Clevo. The model names are written in regex syntax to describe/match all clevo models that are similar enough and use the same PCI SSID that this fixup works for them. Additionally the lines regarding SSID 0x96e1 and 0x97e1 didn't fix audio for the all our Clevo notebooks using these SSIDs (models Clevo P960* and P970*) since ALC1220_FIXP_CLEVO_PB51ED_PINS swapped pins that are not necesarry to be swapped. This patch initiates ALC1220_FIXUP_CLEVO_P950 instead for these model and fixes the audio. Fixes: 80690a27 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by:
Richard Sailer <rs@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Colin Ian King authored
commit 2acf5a3e upstream. There are a couple of left shifts of unsigned 8 bit values that first get promoted to signed ints and hence get sign extended on the shift if the top bit of the 8 bit values are set. Fix this by casting the 8 bit values to unsigned ints to stop the unintentional sign extension. Addresses-Coverity: ("Unintended sign extension") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 34501219 upstream. LINE6 drivers allocate the buffers based on the value returned from usb_maxpacket() calls. The manipulated device may return zero for this, and this results in the kmalloc() with zero size (and it may succeed) while the other part of the driver code writes the packet data with the fixed size -- which eventually overwrites. This patch adds a simple sanity check for the invalid buffer size for avoiding that problem. Reported-by: syzbot+219f00fb49874dcaea17@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Sakamoto authored
commit 7fbd1753 upstream. In IEC 61883-6, 8 MIDI data streams are multiplexed into single MIDI conformant data channel. The index of stream is calculated by modulo 8 of the value of data block counter. In fireworks, the value of data block counter in CIP header has a quirk with firmware version v5.0.0, v5.7.3 and v5.8.0. This brings ALSA IEC 61883-1/6 packet streaming engine to miss detection of MIDI messages. This commit fixes the miss detection to modify the value of data block counter for the modulo calculation. For maintainers, this bug exists since a commit 18f5ed36 ("ALSA: fireworks/firewire-lib: add support for recent firmware quirk") in Linux kernel v4.2. There're many changes since the commit. This fix can be backported to Linux kernel v4.4 or later. I tagged a base commit to the backport for your convenience. Besides, my work for Linux kernel v5.3 brings heavy code refactoring and some structure members are renamed in 'sound/firewire/amdtp-stream.h'. The content of this patch brings conflict when merging -rc tree with this patch and the latest tree. I request maintainers to solve the conflict to replace 'tx_first_dbc' with 'ctx_data.tx.first_dbc'. Fixes: df075fee ("ALSA: firewire-lib: complete AM824 data block processing layer") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Colin Ian King authored
commit c3ea60c2 upstream. There are two occurrances of a call to snd_seq_oss_fill_addr where the dest_client and dest_port arguments are in the wrong order. Fix this by swapping them around. Addresses-Coverity: ("Arguments in wrong order") Signed-off-by:
-
