- 24 Aug, 2013 33 commits
-
-
Sylwester Nawrocki authored
Use clk_prepare_enable()/clk_disable_unprepare() instead of separately prearing/unparing the clk_cam clocks. This simplifies the code that is now mostly not going to be used, function __fimc_md_set_camclk() is only left for S5PV210 platform which is not yet converted to Device Tree. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sylwester Nawrocki authored
Signed-off-by:
-
Sylwester Nawrocki authored
This fixes compilation warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/exynos4-is/exynos-fimc-is.o Signed-off-by:
-
Sylwester Nawrocki authored
Set the subdevs owner module so the exynos4_fimc_is module cannot be unloaded when the FIMC-IS driver is in use. Signed-off-by:
-
Tomasz Figa authored
If the same callbacks are used for runtime and system suspend/resume, clocks can get disabled twice, which can lead to negative reference counts and kernel warnings. This patch splits suspend/resume callbacks into separate runtime and system-wide functions, so clock gating is done correctly. Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Hans de Goede authored
This is a camera with an ov518+ revision 0 bridge + ov7620ae sensor, which appearently needs different handling then the Trust spacecam 320, which has an ov518+ revision 2 + ov7620ae sensor. The Terracam USB Pro used to write this patch has kindly been provided by Dr. Tilmann Bubeck <t.bubeck@reinform.de>. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans Verkuil authored
is_private was set right after creating each control, but the control pointer might be NULL in case of an error. Set it after all controls were successfully created, since that guarantees that all control pointers are non-NULL. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
is_private was set right after creating each control, but the control pointer might be NULL in case of an error. Set it after all controls were successfully created, since that guarantees that all control pointers are non-NULL. Signed-off-by:
-
Hans Verkuil authored
In most cases the v4l2_bt_timings_cap struct has all the information necessary to determine valid timings, but occasionally there are exceptions. Add a callback function to be able to test for those exceptions. Signed-off-by:
-
Hans Verkuil authored
All other functions follow the v4l2_<foo>_dv_timings pattern, do the same for this function. Signed-off-by:
-
Hans Verkuil authored
Some drivers need to be able to access the full list of timings. Signed-off-by:
-
Hans Verkuil authored
The detect_cvt/gtf functions didn't fill in the type field. Signed-off-by:
-
Hans Verkuil authored
The CEA-861 standard allows for the 640x480 format at 25.175 MHz. Ensure that that's allowed according to the struct v4l2_bt_timings_cap. Signed-off-by:
-
Hans Verkuil authored
It's the only function in v4l2-dv-timings.c with the v4l prefix instead of v4l2. Make it consistent with the other functions. Signed-off-by:
-
Hans Verkuil authored
These three drivers all have code to log the dv_timings contents. Replace that code with the new helper function. Signed-off-by:
-
Hans Verkuil authored
Drivers often have to log the contents of a dv_timings struct. Adding this helper will make it easier for drivers to do so. Signed-off-by:
-
Mats Randgaard authored
- register 0x17: CSC scaling factor was set to +/- 2.0. This register is set by ad9389b_csc_conversion_mode() to the right value. - register 0x3b: bits for pixel repetition and CSC was set to zero, but that is the default value. Signed-off-by:
Mats Randgaard <matrandg@cisco.com> Signed-off-by:
-
Martin Bugge authored
Signed-off-by:
Martin Bugge <marbugge@cisco.com> Reviewed-by:
-
Martin Bugge authored
Signed-off-by:
-
Mats Randgaard authored
state->have_monitor is set to false if the EDID that is read from the monitor has too many segments or wrong CRC. Signed-off-by:
-
Mats Randgaard authored
Signed-off-by:
-
Mats Randgaard authored
Don't log if there is no signal. If there is a signal, then also log HDCP and audio status. Signed-off-by:
-
Martin Bugge authored
The frequency calculation has to take deep-color mode into account. While we're at it, also log the deep-color mode in log_status. Signed-off-by:
-
Mats Randgaard authored
The bridge driver is only notified when the input status has changed since the previous interrupt. Signed-off-by:
-
Martin Bugge authored
This patch fixes two errors that caused incorrect format detections: The first bug is in the calculation of the vertical backporch: the combined period of vsync and backporch must *exceed* a certain minimum value, and not be equal to it. The second bug is a rounding error in the reduced blanking calculation: expand the ideal_duty_cylce to be in parts per ten thousand to avoid rounding errors. Signed-off-by:
-
Ricardo Ribalda authored
When 2 devices are registered at the same time, in Part 2 both will get the same minor number, making Part6 crash, because it cannot create a create a device with a duplicated minor: [ 7.157648] ------------[ cut here ]------------ [ 7.157666] WARNING: at fs/sysfs/dir.c:530 sysfs_add_one+0xbd/0xe0() [ 7.157669] sysfs: cannot create duplicate filename '/dev/char/81:1' [ 7.157672] Modules linked in: qtec_xform(+) qt5023_video(+) videobuf2_vmalloc videobuf2_dma_sg videobuf2_memops videobuf2_core gpio_xilinx(+) qtec_white qtec_cmosis(+) qtec_pcie qt5023 [ 7.157694] CPU: 0 PID: 120 Comm: systemd-udevd Not tainted 3.10.0-qtec-standard #8 [ 7.157698] Hardware name: QTechnology QT5022/QT5022, BIOS PM_2.1.0.309 X64 05/23/2013 [ 7.157702] 0000000000000009 ffff8801788358e8 ffffffff8176c487 ffff880178835928 [ 7.157707] ffffffff8106f6f0 ffff880175759770 00000000ffffffef ffff880175759930 [ 7.157712] ffff8801788359e8 ffff880178bff000 ffff880175759930 ffff880178835988 [ 7.157718] Call Trace: [ 7.157728] [<ffffffff8176c487>] dump_stack+0x19/0x1b [ 7.157735] [<ffffffff8106f6f0>] warn_slowpath_common+0x70/0xa0 [ 7.157740] [<ffffffff8106f7d6>] warn_slowpath_fmt+0x46/0x50 [ 7.157746] [<ffffffff81324b35>] ? strlcat+0x65/0x90 [ 7.157750] [<ffffffff811d516d>] sysfs_add_one+0xbd/0xe0 [ 7.157755] [<ffffffff811d5c6b>] sysfs_do_create_link_sd+0xdb/0x200 [ 7.157760] [<ffffffff811d5db1>] sysfs_create_link+0x21/0x40 [ 7.157765] [<ffffffff813e277b>] device_add+0x21b/0x6d0 [ 7.157772] [<ffffffff813f2985>] ? pm_runtime_init+0xe5/0xf0 [ 7.157776] [<ffffffff813e2c4e>] device_register+0x1e/0x30 [ 7.157782] [<ffffffff8153e8c3>] __video_register_device+0x313/0x610 [ 7.157791] [<ffffffffa00957c5>] qtec_xform_probe+0x465/0x7a4 [qtec_xform] [ 7.157797] [<ffffffff813e7b13>] platform_drv_probe+0x43/0x80 [ 7.157802] [<ffffffff813e531a>] ? driver_sysfs_add+0x7a/0xb0 [ 7.157807] [<ffffffff813e584b>] driver_probe_device+0x8b/0x3a0 [ 7.157812] [<ffffffff813e5c0b>] __driver_attach+0xab/0xb0 [ 7.157816] [<ffffffff813e5b60>] ? driver_probe_device+0x3a0/0x3a0 [ 7.157820] [<ffffffff813e37fd>] bus_for_each_dev+0x5d/0xa0 [ 7.157825] [<ffffffff813e529e>] driver_attach+0x1e/0x20 [ 7.157829] [<ffffffff813e4d3e>] bus_add_driver+0x10e/0x280 [ 7.157833] [<ffffffffa0099000>] ? 0xffffffffa0098fff [ 7.157837] [<ffffffffa0099000>] ? 0xffffffffa0098fff [ 7.157842] [<ffffffff813e6317>] driver_register+0x77/0x170 [ 7.157848] [<ffffffff81151bcc>] ? __vunmap+0x9c/0x110 [ 7.157852] [<ffffffffa0099000>] ? 0xffffffffa0098fff [ 7.157857] [<ffffffff813e7236>] platform_driver_register+0x46/0x50 [ 7.157863] [<ffffffffa0099010>] qtec_xform_plat_driver_init+0x10/0x12 [qtec_xform] [ 7.157869] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [ 7.157875] [<ffffffff810cf1f1>] load_module+0x1a91/0x2630 [ 7.157880] [<ffffffff8133bee0>] ? ddebug_proc_show+0xe0/0xe0 [ 7.157887] [<ffffffff817760f2>] ? page_fault+0x22/0x30 [ 7.157892] [<ffffffff810cfe7a>] SyS_init_module+0xea/0x140 [ 7.157898] [<ffffffff8177e5b9>] tracesys+0xd0/0xd5 [ 7.157902] ---[ end trace 660cc3a65a4bf01b ]--- [ 7.157939] __video_register_device: device_register failed Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
-
Sylwester Nawrocki authored
Prevent following build warning: drivers/media/v4l2-core/v4l2-ctrls.c: In function v4l2_ctrl_new_std_menu: drivers/media/v4l2-core/v4l2-ctrls.c:1768:15: warning: 'qmenu_int_len' may be used uninitialized in this function Signed-off-by:
-
Lad, Prabhakar authored
add OF support for the tvp7002 driver. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
This patch adds 'sync-on-green-active' property as part of endpoint property. Signed-off-by:
-
Fabio Estevam authored
When using devm_ioremap_resource(), we do not need to check the return value of platform_get_resource(), so just remove it. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Fabio Estevam authored
clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by:
-
Fabio Estevam authored
Some resources were not being released in the error path and some were released in the incorrect order. Signed-off-by:
-
Shaik Ameer Basha authored
When streamoff is called on the context and the context is added to the job_queue, 1] sometimes device_run receives the empty vb2 buffers (as v4l2_m2m_streamoff is dropping the ready queue). 2] sometimes v4l2_m2m_job_finish may not succeed as the m2m_dev->curr_ctx is made NULL in the v4l2_m2m_streamoff() The above points may stop the execution of the other queued contexts. This patch makes sure that before streamoff is executed on any context, that context should "not be running" or "not queued" in the job_queue. 1] If the current context is running, then abort job will be called. 2] If the current context is queued, then the context will be removed from the job_queue. Signed-off-by:
Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by:
-
- 23 Aug, 2013 3 commits
-
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’: drivers/media/v4l2-core/videobuf2-dma-contig.c:204: error: implicit declaration of function ‘dma_mmap_coherent’ drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’: drivers/media/v4l2-core/videobuf2-dma-contig.c:387: error: implicit declaration of function ‘dma_get_sgtable’ Commit da508f57 ("[media] media/v4l2: VIDEOBUF2_DMA_CONTIG should depend on HAS_DMA") added a dependency on HAS_DMA to VIDEO_SH_VEU, as it selects VIDEOBUF2_DMA_CONTIG. However, this got lost in the merge conflict resolution in commit df90e225 ("Merge branch 'devel-for-v3.10' into v4l_for_linus"). Re-add the dependency to fix this. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Johannes Erdfelt authored
The KWorld UB445-U is similar to the UB430-AF but with a Samsung S5H1411 frontend. Luckily all of the hardware is already well supported, just the device and USB ids need to be added to get it to work. Signed-off-by:
Johannes Erdfelt <johannes@erdfelt.com> Signed-off-by:
-
Juergen Lock authored
At least technisat-usb2.c doesn't set these... Signed-off-by:
Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by:
-
- 22 Aug, 2013 4 commits
-
-
Julia Lawall authored
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Bjørn Mork authored
GIT_AUTHOR_DATE=1376465691 I took a quick look at the code and wonder if the problem is caused by an initial zero statistics message? This is all just a wild guess, but if it is correct, then the attached untested patch might fix it... Bjørn >From d78a0599d5b5d4da384eae08bf7da316389dfbe5 Mon Sep 17 00:00:00 2001 ts_packets and ets_packets counters can be 0. Don't fall over if they are. Fixes: [ 846.851711] divide error: 0000 [#1] SMP [ 846.851806] Modules linked in: smsdvb dvb_core ir_lirc_codec lirc_dev ir_sanyo_decoder ir_mce_kbd_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_hauppauge smsusb smsmdtv rc_core pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) parport_pc ppdev lp parport cpufreq_userspace cpufreq_powersave cpufreq_stats cpufreq_conservative rfcomm bnep binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd dns_resolver fscache sunrpc ext4 jbd2 fuse tp_smapi(O) thinkpad_ec(O) loop firewire_sbp2 dm_crypt snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm thinkpad_acpi nvram snd_page_alloc hid_generic snd_seq_midi snd_seq_midi_event arc4 usbhid snd_rawmidi uvcvideo hid iwldvm coretemp kvm_intel mac8021 1 cdc_wdm [ 846.853477] cdc_acm snd_seq videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media kvm radeon r852 ttm joydev cdc_ether usbnet pcmcia mii sm_common nand btusb drm_kms_helper tpm_tis acpi_cpufreq bluetooth iwlwifi nand_ecc drm nand_ids i2c_i801 mtd snd_seq_device iTCO_wdt iTCO_vendor_support r592 memstick lpc_ich mperf tpm yenta_socket pcmcia_rsrc pcmcia_core cfg80211 snd_timer snd pcspkr i2c_algo_bit crc16 i2c_core tpm_bios processor mfd_core wmi psmouse mei_me rfkill mei serio_raw soundcore evdev battery button video ac microcode ext3 mbcache jbd md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod sd_mod cdrom crc_t10dif firewire_ohci sdhci_pci sdhci mmc_core firewire_core crc_itu_t thermal thermal_sys ahci libahci ehci_pci uhci_hcd ehci_hcd libata scsi_mod usbcore e1000 e usb_common [ 846.855310] ptp pps_core [ 846.855356] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10-2-amd64 #1 Debian 3.10.5-1 [ 846.855490] Hardware name: LENOVO 4061WFA/4061WFA, BIOS 6FET92WW (3.22 ) 12/14/2011 [ 846.855609] task: ffffffff81613400 ti: ffffffff81600000 task.ti: ffffffff81600000 [ 846.855636] RIP: 0010:[<ffffffffa092be0c>] [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb] [ 846.863906] RSP: 0018:ffff88013bc03cf0 EFLAGS: 00010046 [ 846.863906] RAX: 0000000000000000 RBX: ffff880133bf6000 RCX: 0000000000000000 [ 846.863906] RDX: 0000000000000000 RSI: ffff88005d3b58c0 RDI: ffff880133bf6000 [ 846.863906] RBP: ffff88005d1da000 R08: 0000000000000058 R09: 0000000000000015 [ 846.863906] R10: 0000000000001a0d R11: 000000000000021a R12: ffff88005d3b58c0 [ 846.863906] R13: ffff88005d1da008 R14: 00000000ffffff8d R15: ffff880036cf5060 [ 846.863906] FS: 0000000000000000(0000) GS:ffff88013bc00000(0000) knlGS:0000000000000000 [ 846.863906] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 846.863906] CR2: 00007f3a4b69ae50 CR3: 0000000036dac000 CR4: 00000000000407f0 [ 846.863906] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 846.863906] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 846.863906] Stack: [ 846.863906] ffff88007a102000 ffff88005d1da000 ffff88005d3b58c0 0000000000085824 [ 846.863906] ffffffffa08c5aa3 ffff88005d1da000 ffff8800a6907390 ffff8800a69073b0 [ 846.863906] ffff8800a6907000 ffffffffa08b642c 000000000000021a ffff8800a69073b0 [ 846.863906] Call Trace: [ 846.863906] <IRQ> [ 846.863906] [ 846.863906] [<ffffffffa08c5aa3>] ? smscore_onresponse+0x1d5/0x353 [smsmdtv] [ 846.863906] [<ffffffffa08b642c>] ? smsusb_onresponse+0x146/0x192 [smsusb] [ 846.863906] [<ffffffffa004cb1a>] ? usb_hcd_giveback_urb+0x6c/0xac [usbcore] [ 846.863906] [<ffffffffa0217be1>] ? ehci_urb_done+0x62/0x72 [ehci_hcd] [ 846.863906] [<ffffffffa0217c82>] ? qh_completions+0x91/0x364 [ehci_hcd] [ 846.863906] [<ffffffffa0219bba>] ? ehci_work+0x8a/0x68e [ehci_hcd] [ 846.863906] [<ffffffff8107336c>] ? timekeeping_get_ns.constprop.10+0xd/0x31 [ 846.863906] [<ffffffff81064d41>] ? update_cfs_rq_blocked_load+0xde/0xec [ 846.863906] [<ffffffff81058ec2>] ? run_posix_cpu_timers+0x25/0x575 [ 846.863906] [<ffffffffa021aa46>] ? ehci_irq+0x211/0x23d [ehci_hcd] [ 846.863906] [<ffffffffa004c0c1>] ? usb_hcd_irq+0x31/0x48 [usbcore] [ 846.863906] [<ffffffff810996fd>] ? handle_irq_event_percpu+0x49/0x1a4 [ 846.863906] [<ffffffff8109988a>] ? handle_irq_event+0x32/0x4b [ 846.863906] [<ffffffff8109bd76>] ? handle_fasteoi_irq+0x80/0xb6 [ 846.863906] [<ffffffff8100e93e>] ? handle_irq+0x18/0x20 [ 846.863906] [<ffffffff8100e657>] ? do_IRQ+0x40/0x95 [ 846.863906] [<ffffffff813883ed>] ? common_interrupt+0x6d/0x6d [ 846.863906] <EOI> [ 846.863906] [ 846.863906] [<ffffffff812a011c>] ? arch_local_irq_enable+0x4/0x8 [ 846.863906] [<ffffffff812a04f3>] ? cpuidle_enter_state+0x52/0xc1 [ 846.863906] [<ffffffff812a0636>] ? cpuidle_idle_call+0xd4/0x143 [ 846.863906] [<ffffffff8101398c>] ? arch_cpu_idle+0x5/0x17 [ 846.863906] [<ffffffff81072571>] ? cpu_startup_entry+0x10d/0x187 [ 846.863906] [<ffffffff816b3d3d>] ? start_kernel+0x3e8/0x3f3 [ 846.863906] [<ffffffff816b3777>] ? repair_env_string+0x54/0x54 [ 846.863906] [<ffffffff816b3598>] ? x86_64_start_kernel+0xf2/0xfd [ 846.863906] Code: 25 09 00 00 c6 83 da 08 00 00 03 8b 45 54 48 01 83 b6 08 00 00 8b 45 50 48 01 83 db 08 00 00 8b 4d 18 69 c1 ff ff 00 00 03 4d 14 <48> f7 f1 89 83 a8 09 00 00 e9 68 fe ff ff 48 8b 7f 10 e8 79 92 [ 846.863906] RIP [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb] [ 846.863906] RSP <ffff88013bc03cf0> Reference: http://bugs.debian.org/719623Reported-by:
Johannes Rohr <jorohr@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Mauro Carvalho Chehab authored
Those boards were missing the ISDB-T support. Most of the work on this patch were done by Alfredo. My work here were to port this patch from Kernel 3.2 to upstream, fix the issue caused by the set_frontend bad hook, and add the Kconfig bits. Tested on a X8502 board rebranded as: "Leadership - Placa PCI-e de Captura de Vídeo Híbrida" - product code 3800. Thanks-to: Alfredo Delaiti <alfredodelaiti@netscape.net> Tested-by:
Alfredo Delaiti <alfredodelaiti@netscape.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
changeset 768e6dad caused a regression on using mb86a20s in parallel mode, as the parallel mode selection got overriden by mb86a20s_init2. Cc: stable@vger.kernel.org Signed-off-by:
-
