- 10 Sep, 2024 40 commits
-
-
Li Zetao authored
The old page API is being gradually replaced and converted to use folio to improve code readability and avoid repeated conversion between page and folio. And page_to_inode() can be replaced with folio_to_inode() now. Signed-off-by:
Li Zetao <lizetao1@huawei.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Li Zetao authored
The old page API is being gradually replaced and converted to use folio to improve code readability and avoid repeated conversion between page and folio. Moreover, use folio_pos() instead of page_offset(), which is more consistent with folio usage. Signed-off-by:
-
Li Zetao authored
The old page API is being gradually replaced and converted to use folio to improve code readability and avoid repeated conversion between page and folio. Signed-off-by:
-
Li Zetao authored
The old page API is being gradually replaced and converted to use folio to improve code readability and avoid repeated conversion between page and folio. Moreover, use folio_pos() instead of page_offset(), which is more consistent with folio usage. Signed-off-by:
-
Li Zetao authored
The old page API is being gradually replaced and converted to use folio to improve code readability and avoid repeated conversion between page and folio. Moreover, use kmap_local_folio() instead of kmap_local_page(), which is more consistent with folio usage. Signed-off-by:
-
Li Zetao authored
The old page API is being gradually replaced and converted to use folio to improve code readability and avoid repeated conversion between page and folio. Signed-off-by:
-
Li Zetao authored
The old page API is being gradually replaced and converted to use folio to improve code readability and avoid repeated conversion between page and folio. And use folio_pos instead of page_offset, which is more consistent with folio usage. At the same time, folio_test_private() can handle folio directly without converting from page to folio first. Signed-off-by:
-
Li Zetao authored
The old page API is being gradually replaced and converted to use folio to improve code readability and avoid repeated conversion between page and folio. Use folio_pos instead of page_offset, which is more consistent with folio usage. Signed-off-by:
-
Li Zetao authored
The old page API is being gradually replaced and converted to use folio to improve code readability and avoid repeated conversion between page and folio. Now clear_page_extent_mapped() can deal with a folio directly, so change its name to clear_folio_extent_mapped(). Signed-off-by:
-
Qu Wenruo authored
Currently btrfs compression path is not really subpage compatible, every thing is still done in page unit. That's fine for regular sector size and subpage routine. As even for subpage routine compression is only enabled if the whole range is page aligned, so reading the page cache in page unit is totally fine. However in preparation for the future subpage perfect compression support, we need to change the compression routine to properly handle a subpage range. This patch would prepare both zlib and zstd to only read the subpage range for compression. Lzo is already doing subpage aware read, as lzo's on-disk format is already sectorsize dependent. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
There are only two differences between the two functions: - btrfs_orig_bbio_end_io() does extra error propagation This is mostly to allow tolerance for write errors. - btrfs_orig_bbio_end_io() does extra pending_ios check This check can handle both the original bio, or the cloned one. (All accounting happens in the original one). This makes btrfs_orig_bbio_end_io() a much safer call. In fact we already had a double freeing error due to usage of btrfs_bio_end_io() in the error path of btrfs_submit_chunk(). So just move the whole content of btrfs_orig_bbio_end_io() into btrfs_bio_end_io(). For normal paths this brings no change, because they are already calling btrfs_orig_bbio_end_io() in the first place. For error paths (not only inside bio.c but also external callers), this change will introduce extra checks, especially for external callers, as they will error out without submitting the btrfs bio. But considering it's already in the error path, such slower but much safer checks are still an overall win. Signed-off-by:
-
Josef Bacik authored
Historically we've held the extent lock throughout the entire read. There's been a few reasons for this, but it's mostly just caused us problems. For example, this prevents us from allowing page faults during direct io reads, because we could deadlock. This has forced us to only allow 4k reads at a time for io_uring NOWAIT requests because we have no idea if we'll be forced to page fault and thus have to do a whole lot of work. On the buffered side we are protected by the page lock, as long as we're reading things like buffered writes, punch hole, and even direct IO to a certain degree will get hung up on the page lock while the page is in flight. On the direct side we have the dio extent lock, which acts much like the way the extent lock worked previously to this patch, however just for direct reads. This protects direct reads from concurrent direct writes, while we're protected from buffered writes via the inode lock. Now that we're protected in all cases, narrow the extent lock to the part where we're getting the extent map to submit the reads, no longer holding the extent lock for the entire read operation. Push the extent lock down into do_readpage() so that we're only grabbing it when looking up the extent map. This portion was contributed by Goldwyn. Co-developed-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Josef Bacik authored
Currently we hold the extent lock for the entire duration of a read. This isn't really necessary in the buffered case, we're protected by the page lock, however it's necessary for O_DIRECT. For O_DIRECT reads, if we only locked the extent for the part where we get the extent, we could potentially race with an O_DIRECT write in the same region. This isn't really a problem, unless the read is delayed so much that the write does the COW, unpins the old extent, and some other application re-allocates the extent before the read is actually able to be submitted. At that point at best we'd have a checksum mismatch, but at worse we could read data that doesn't belong to us. To address this potential race we need to make sure we don't have overlapping, concurrent direct io reads and writes. To accomplish this use the new EXTENT_DIO_LOCKED bit in the direct IO case in the same spot as the current extent lock. The writes will take this while they're creating the ordered extent, which is also used to make sure concurrent buffered reads or concurrent direct reads are not allowed to occur, and drop it after the ordered extent is taken. For reads it will act as the current read behavior for the EXTENT_LOCKED bit, we set it when we're starting the read, we clear it in the end_io to allow other direct writes to continue. This still has the drawback of disallowing concurrent overlapping direct reads from occurring, but that exists with the current extent locking. Signed-off-by:
-
Josef Bacik authored
In order to support dropping the extent lock during a read we need a way to make sure that direct reads and direct writes for overlapping ranges are protected from each other. To accomplish this introduce another lock bit specifically for direct io. Subsequent patches will utilize this to protect direct IO operations. Signed-off-by:
-
David Sterba authored
Defrag ioctl passes readahead from the file, but autodefrag does not have a file so the readahead state is allocated when needed. The autodefrag loop in cleaner thread iterates over inodes so we can simply provide an on-stack readahead state and will not need to allocate it in btrfs_defrag_file(). The size is 32 bytes which is acceptable. Reviewed-by:
-
David Sterba authored
There's only one caller inode_should_defrag() that passes NULL to btrfs_add_inode_defrag() so we can drop it an simplify the code. Reviewed-by:
-
David Sterba authored
The potential memory allocation failure is not a fatal error, skipping autodefrag is fine and the caller inode_should_defrag() does not care about the errors. Further writes can attempt to add the inode back to the defragmentation list again. Reviewed-by:
-
David Sterba authored
btrfs_cleanup_defrag_inodes() is not called frequently, only in remount or unmount, but the way it frees the inodes in fs_info->defrag_inodes is inefficient. Each time it needs to locate first node, remove it, potentially rebalance tree until it's done. This allows to do a conditional reschedule. For cleanups the rbtree_postorder_for_each_entry_safe() iterator is convenient but we can't reschedule and restart iteration because some of the tree nodes would be already freed. The cleanup operation is kmem_cache_free() which will likely take the fast path for most objects so rescheduling should not be necessary. Reviewed-by:
-
David Sterba authored
The function does not follow the pattern where the underscores would be justified, so rename it. Reviewed-by:
-
David Sterba authored
The function does not follow the pattern where the underscores would be justified, so rename it. Also update the misleading comment, the passed item is not freed, that's what the caller does. Reviewed-by:
-
David Sterba authored
The function does not follow the pattern where the underscores would be justified, so rename it. Reviewed-by:
-
David Sterba authored
A comparator function does not change its parameters, make them const. Reviewed-by:
-
David Sterba authored
The function does not follow the pattern where the underscores would be justified, so rename it. Reviewed-by:
-
David Sterba authored
The function does not follow the pattern where the underscores would be justified, so rename it. Reviewed-by:
-
David Sterba authored
Previous patch freed the function name btrfs_submit_bio() so we can use it for a helper that submits struct bio. Reviewed-by:
-
David Sterba authored
The function name is a bit misleading as it submits the btrfs_bio (bbio), rename it so we can use btrfs_submit_bio() when an actual bio is submitted. Reviewed-by:
-
Qu Wenruo authored
The member btrfs_fs_info::subpage_info stores the cached bitmap start position inside the merged bitmap. However in reality there is only one thing depending on the sectorsize, bitmap_nr_bits, which records the number of sectors that fit inside a page. The sequence of sub-bitmaps have fixed order, thus it's just a quick multiplication to calculate the start position of each sub-bitmaps. Signed-off-by:
-
Qu Wenruo authored
The parameter @nr_ret is used to tell the caller how many sectors have been submitted for IO. Then callers check @nr_ret value to determine if we need to manually clear the PAGECACHE_TAG_DIRTY, as if we submitted no sector (e.g. all sectors are beyond i_size) there is no folio_start_writeback() called thus PAGECACHE_TAG_DIRTY tag will not be cleared. Remove this parameter by: - Moving the btrfs_folio_clear_writeback() call into __extent_writepage_io() So that if we didn't submit any IO, then manually call btrfs_folio_set_writeback() to clear PAGECACHE_TAG_DIRTY when the page is no longer dirty. - Use a bool to record if we have submitted any sector Instead of an int. - Use subpage compatible helpers to end folio writeback. This brings no change to the behavior, just for the sake of consistency. As for the call site inside __extent_writepage(), we're always called for the whole page, so the existing full page helper folio_(start|end)_writeback() is totally fine. For the call site inside extent_write_locked_range(), although we can have subpage range, folio_start_writeback() will only clear PAGECACHE_TAG_DIRTY if the page is no longer dirty, and the full folio will still be dirty if there is any subpage dirty range. Only when the last dirty subpage sector is cleared, the folio_start_writeback() will clear PAGECACHE_TAG_DIRTY. So no matter if we call the full page or subpage helper, the result is still the same, then just use the subpage helpers for consistency. Signed-off-by:
-
Thorsten Blum authored
Fix a few obvious grammar mistakes: a -> an, then -> than. Signed-off-by:
Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by:
-
Junchao Sun authored
Use xarray to track dirty extents to reduce the size of the struct btrfs_qgroup_extent_record from 64 bytes to 40 bytes. The xarray is more cache line friendly, it also reduces the complexity of insertion and search code compared to rb tree. Another change introduced is about error handling. Before this patch, the result of btrfs_qgroup_trace_extent_nolock() is always a success. In this patch, because of this function calls the function xa_store() which has the possibility to fail, so mark qgroup as inconsistent if error happened and then free preallocated memory. Also we preallocate memory before spin_lock(), if memory preallcation failed, error handling is the same the existing code. Suggested-by:
Junchao Sun <sunjunchao2870@gmail.com> Signed-off-by:
-
Junchao Sun authored
Clean up resources using goto to get rid of repeated code. Reviewed-by:
-
Qu Wenruo authored
Unlike the bitmap usage inside raid56, for __extent_writepage_io() we handle the subpage submission not sector-by-sector, but for each dirty range we found. This is not a big deal normally, as the subpage complex code is already mostly optimized out by the compiler for x86_64. However for the sake of consistency and for the future of subpage sector-perfect compression support, this patch does: - Extract the sector submission code into submit_one_sector() - Add the needed code to extract the dirty bitmap for subpage case There is a small pitfall for non-subpage case, as we cleared page dirty before starting writeback, so we have to manually set the default dirty_bitmap to 1 for such case. - Use bitmap_and() to calculate the target sectors we need to submit This is done for both subpage and non-subpage cases, and will later be expanded to skip inline/compression ranges. For x86_64, the dirty bitmap will be fixed to 1, with the length of 1, so we're still doing the same workload per sector. For larger page sizes, the overhead will be a little larger, as previous we only need to do one extent_map lookup per-dirty-range, but now it will be one extent_map lookup per-sector. But that is the same frequency as x86_64, so we're just aligning the behavior to x86_64. Reviewed-by:
-
Qu Wenruo authored
In commit 75258f20 ("btrfs: subpage: dump extra subpage bitmaps for debug") an internal macro GET_SUBPAGE_BITMAP() is introduced to grab the bitmap of each attribute. But that commit is using bitmap_cut() which will do the left shift of the larger bitmap, causing incorrect values. Thankfully this bitmap_cut() is only called for debug usage, and so far it's not yet causing problem. Fix it to use bitmap_read() to only grab the desired sub-bitmap. Fixes: 75258f20 ("btrfs: subpage: dump extra subpage bitmaps for debug") CC: stable@vger.kernel.org # 6.6+ Signed-off-by:
-
Johannes Thumshirn authored
Currently we're calling btrfs_num_copies() before btrfs_get_chunk_map() in btrfs_map_block(). But btrfs_num_copies() itself does a chunk map lookup to be able to calculate the number of copies. So split out the code getting the number of copies from btrfs_num_copies() into a helper called btrfs_chunk_map_num_copies() and directly call it from btrfs_map_block() and btrfs_num_copies(). This saves us one rbtree lookup per btrfs_map_block() invocation. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Filipe Manana authored
The BTRFS_IOC_SYNC ioctl wants to wake up the cleaner kthread so that it does any pending work (subvolume deletion, delayed iputs, etc), however it is waking up the transaction kthread, which in turn wakes up the cleaner. Since we don't have any transaction to commit, as any ongoing transaction was already committed when it called btrfs_sync_fs() and the goal is just to wake up the cleaner thread, directly wake up the cleaner instead of the transaction kthread. Reviewed-by:
Boris Burkov <boris@bur.io> Reviewed-by:
-
Qu Wenruo authored
Btrfs only supports sectorsize 4K, 8K, 16K, 32K, 64K for now, thus for systems with 4K page size, there is no way the fs is subpage (sectorsize < PAGE_SIZE). So here we define btrfs_is_subpage() different according to the PAGE_SIZE: - PAGE_SIZE > 4K We may hit real subpage cases, define btrfs_is_subpage() as a regular function and do the usual checks. - PAGE_SIZE == 4K (no smaller PAGE_SIZE support AFAIK) There is no way the fs is subpage, so just define btrfs_is_subpage() as an inline function which always return false. This saves about 7K bytes for x86_64 debug builds: text data bss dec hex filename Before: 1484452 168693 25776 1678921 199e49 fs/btrfs/btrfs.ko After: 1476605 168445 25776 1670826 197eaa fs/btrfs/btrfs.ko Signed-off-by:
-
Johannes Thumshirn authored
Now that RAID stripe-tree lookup failures are not treated as a fatal issue any more, change the RAID stripe-tree lookup error message to debug level. Reviewed-by:
-
Johannes Thumshirn authored
On relocation we're doing readahead on the relocation inode, but if the filesystem is backed by a RAID stripe tree we can get ENOENT (e.g. due to preallocated extents not being mapped in the RST) from the lookup. But readahead doesn't handle the error and submits invalid reads to the device, causing an assertion in the scatter-gather list code: BTRFS info (device nvme1n1): balance: start -d -m -s BTRFS info (device nvme1n1): relocating block group 6480920576 flags data|raid0 BTRFS error (device nvme1n1): cannot find raid-stripe for logical [6481928192, 6481969152] devid 2, profile raid0 ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:115! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1012 Comm: btrfs Not tainted 6.10.0-rc7+ #567 RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002cd11000 CR3: 00000001109ea001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die_body.cold+0x14/0x25 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? __blk_rq_map_sg+0x339/0x4a0 ? exc_invalid_op+0x50/0x70 ? __blk_rq_map_sg+0x339/0x4a0 ? asm_exc_invalid_op+0x1a/0x20 ? __blk_rq_map_sg+0x339/0x4a0 nvme_prep_rq.part.0+0x9d/0x770 nvme_queue_rq+0x7d/0x1e0 __blk_mq_issue_directly+0x2a/0x90 ? blk_mq_get_budget_and_tag+0x61/0x90 blk_mq_try_issue_list_directly+0x56/0xf0 blk_mq_flush_plug_list.part.0+0x52b/0x5d0 __blk_flush_plug+0xc6/0x110 blk_finish_plug+0x28/0x40 read_pages+0x160/0x1c0 page_cache_ra_unbounded+0x109/0x180 relocate_file_extent_cluster+0x611/0x6a0 ? btrfs_search_slot+0xba4/0xd20 ? balance_dirty_pages_ratelimited_flags+0x26/0xb00 relocate_data_extent.constprop.0+0x134/0x160 relocate_block_group+0x3f2/0x500 btrfs_relocate_block_group+0x250/0x430 btrfs_relocate_chunk+0x3f/0x130 btrfs_balance+0x71b/0xef0 ? kmalloc_trace_noprof+0x13b/0x280 btrfs_ioctl+0x2c2e/0x3030 ? kvfree_call_rcu+0x1e6/0x340 ? list_lru_add_obj+0x66/0x80 ? mntput_no_expire+0x3a/0x220 __x64_sys_ioctl+0x96/0xc0 do_syscall_64+0x54/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fcc04514f9b Code: Unable to access opcode bytes at 0x7fcc04514f71. RSP: 002b:00007ffeba923370 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fcc04514f9b RDX: 00007ffeba923460 RSI: 00000000c4009420 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000013 R09: 0000000000000001 R10: 00007fcc043fbba8 R11: 0000000000000246 R12: 00007ffeba924fc5 R13: 00007ffeba923460 R14: 0000000000000002 R15: 00000000004d4bb0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcc04514f71 CR3: 00000001109ea001 CR4: 0000000000370eb0 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception ]--- So in case of a relocation on a RAID stripe-tree based file system, skip the readahead. Reviewed-by:
-
Johannes Thumshirn authored
Set rst_search_commit_root in the btrfs_io_stripe we're passing to btrfs_map_block() in case we're doing data relocation. Reviewed-by:
-
Johannes Thumshirn authored
Rename 'btrfs_io_stripe::is_scrub' to 'rst_search_commit_root'. While 'is_scrub' describes the state of the io_stripe (it is a stripe submitted by scrub) it does not describe the purpose, namely looking at the commit root when searching RAID stripe-tree entries. Renaming the stripe to rst_search_commit_root describes this purpose. Reviewed-by:
-
