Pull more MIPS updates from Thomas Bogendoerfer:
 "A few more cleanups and fixes"

* tag 'mips_6.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Workaround clang inline compat branch issue
  mips: dts: ralink: mt7621: add phandle to system controller node for watchdog
  mips: dts: ralink: mt7621: rename watchdog node from 'wdt' into 'watchdog'
  mips: ralink: make SOC_MT7621 select PINCTRL
  mips: remove SYS_HAS_CPU_MIPS32_R1 from RALINK
  MIPS: cevt-r4k: Offset the value used to clear compare interrupt
  MIPS: smp-cps: Don't rely on CP0_CMGCRBASE
  MIPS: Remove DMA_PERDEV_COHERENT

Pull objtool updates from Ingo Molnar:

 - Shrink 'struct instruction', to improve objtool performance & memory
   footprint

 - Other maximum memory usage reductions - this makes the build both
   faster, and fixes kernel build OOM failures on allyesconfig and
   similar configs when they try to build the final (large) vmlinux.o

 - Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
   single-byte instruction (PUSH/POP or LEAVE). This requires the
   extension of the ORC metadata structure with a 'signal' field

 - Misc fixes & cleanups

* tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  objtool: Fix ORC 'signal' propagation
  objtool: Remove instruction::list
  x86: Fix FILL_RETURN_BUFFER
  objtool: Fix overlapping alternatives
  objtool: Union instruction::{call_dest,jump_table}
  objtool: Remove instruction::reloc
  objtool: Shrink instruction::{type,visited}
  objtool: Make instruction::alts a single-linked list
  objtool: Make instruction::stack_ops a single-linked list
  objtool: Change arch_decode_instruction() signature
  x86/entry: Fix unwinding from kprobe on PUSH/POP instruction
  x86/unwind/orc: Add 'signal' field to ORC metadata
  objtool: Optimize layout of struct special_alt
  objtool: Optimize layout of struct symbol
  objtool: Allocate multiple structures with calloc()
  objtool: Make struct check_options static
  objtool: Make struct entries[] static and const
  objtool: Fix HOSTCC flag usage
  objtool: Properly support make V=1
  objtool: Install libsubcmd in build
  ...

Pull auxdisplay fix from Miguel Ojeda:

  - hd44780: Fix potential memory leak in hd44780_remove() (Jianglei Nie)

* tag 'auxdisplay-6.3' of https://github.com/ojeda/linux:
  auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()

Merge tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here is another small set of driver core patches.

  They resolve some reported problems with the previous driver core
  patches that are in your tree.

  They solve a problem with the bus_type cleanup as reported and fixed
  by Geert, and two fw_devlink changes to make debugging problems
  easier.

  There is one known outstanding problem with the fw_deflink changes in
  your tree that is still being worked on, and it looks like a clk core
  change will be submitted soon for that, probably after 6.3-rc1.

  All three of these have been in linux-next with no reported problems
  (only reports that they fixed problems)"

* tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: fw_devlink: Print full path and name of fwnode
  driver core: fw_devlink: Avoid spurious error message
  driver core: bus: Handle early calls to bus_to_subsys()

Pull spi fixes from Mark Brown:
 "A small set of fixes for SPI drivers, Krishna has been doing a bunch
  of work on Tegra210 QuadSPI and found a bunch of issues there and
  there's a couple of small fixes for other drivers too"

* tag 'spi-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: tegra210-quad: Fix iterator outside loop
  spi: tegra210-quad: Fix validate combined sequence
  spi: tegra210-quad: set half duplex flag
  spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bits
  spi: cadence-quadspi: Fix cancel the indirect read mask

Pull regulator fixes from Mark Brown:
 "Two fixes here, one driver fix for incorrect error codes and a fix in
  the core to use ktime_get_boottime() in order to fix accounting of the
  time regulators have been powered down over suspend. ktime_get()
  pauses over suspend which is not what we want"

* tag 'regulator-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
  regulator: max597x: Fix error return code in max597x_get_status

Pull nfsd fix from Chuck Lever:

 - Make new GSS Kerberos Kunit tests work on non-x86 platforms

* tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Properly terminate test case arrays
  SUNRPC: Let Kunit tests run with some enctypes compiled out

The argument to do_div() is a 32-bit integer, and it was read from a
32-bit register so there is no point in doing a 64-bit division on it.

On 32-bit arm, do_div() causes a compile-time warning here:

    include/asm-generic/div64.h:238:22: error: passing argument 1 of '__div64_32' from incompatible pointer type [-Werror=incompatible-pointer-types]
      238 |   __rem = __div64_32(&(n), __base); \
          |                      ^~~~
          |                      |
          |                      unsigned int *
    drivers/power/supply/qcom_battmgr.c:1130:4: note: in expansion of macro 'do_div'
     1130 |    do_div(battmgr->status.percent, 100);
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words.  It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.

That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more.  And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation.  It's a lose-lose
situation.

So just change the 'u32[2]' into a 'u64' and be done with it.

We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).

So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.

This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently.  By just using a saner data structure, it went from

	unsigned __capi;
	CAP_FOR_EACH_U32(__capi) {
		if (a.cap[__capi] != b.cap[__capi])
			return false;
	}
	return true;

to just being

	return a.val == b.val;

instead.  Which is rather more obvious both to humans and to compilers.

Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sh updates from John Paul Adrian Glaubitz:

 - regression fix in connection with the rtl8169 driver on SuperH boards
   that was introduced when the driver was switched to use
   devm_clk_get_optional_enabled() to simplify the code (Geert
   Uytterhoeven)

 - build warning fix to allow the kernel to be built with CONFIG_WERROR
   enabled (Michael Karcher)

* tag 'sh-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: clk: Fix clk_enable() to return 0 on NULL clk
  sh: intc: Avoid spurious sizeof-pointer-div warning

Merge tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Make -mstrict-align configurable

 - Add kernel relocation and KASLR support

 - Add single kernel image implementation for kdump

 - Add hardware breakpoints/watchpoints support

 - Add kprobes/kretprobes/kprobes_on_ftrace support

 - Add LoongArch support for some selftests.

* tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits)
  selftests/ftrace: Add LoongArch kprobe args string tests support
  selftests/seccomp: Add LoongArch selftesting support
  tools: Add LoongArch build infrastructure
  samples/kprobes: Add LoongArch support
  LoongArch: Mark some assembler symbols as non-kprobe-able
  LoongArch: Add kprobes on ftrace support
  LoongArch: Add kretprobes support
  LoongArch: Add kprobes support
  LoongArch: Simulate branch and PC* instructions
  LoongArch: ptrace: Add hardware single step support
  LoongArch: ptrace: Add function argument access API
  LoongArch: ptrace: Expose hardware breakpoints to debuggers
  LoongArch: Add hardware breakpoints/watchpoints support
  LoongArch: kdump: Add crashkernel=YM handling
  LoongArch: kdump: Add single kernel image implementation
  LoongArch: Add support for kernel address space layout randomization (KASLR)
  LoongArch: Add support for kernel relocation
  LoongArch: Add la_abs macro implementation
  LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
  LoongArch: Use la.pcrel instead of la.abs when it's trivially possible
  ...

Pull UML updates from Richard Weinberger:

 - Add support for rust (yay!)

 - Add support for LTO

 - Add platform bus support to virtio-pci

 - Various virtio fixes

 - Coding style, spelling cleanups

* tag 'uml-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (27 commits)
  Documentation: rust: Fix arch support table
  uml: vector: Remove unused definitions VECTOR_{WRITE,HEADERS}
  um: virt-pci: properly remove PCI device from bus
  um: virtio_uml: move device breaking into workqueue
  um: virtio_uml: mark device as unregistered when breaking it
  um: virtio_uml: free command if adding to virtqueue failed
  UML: define RUNTIME_DISCARD_EXIT
  virt-pci: add platform bus support
  um-virt-pci: Make max delay configurable
  um: virt-pci: implement pcibios_get_phb_of_node()
  um: Support LTO
  um: put power options in a menu
  um: Use CFLAGS_vmlinux
  um: Prevent building modules incompatible with MODVERSIONS
  um: Avoid pcap multiple definition errors
  um: Make the definition of cpu_data more compatible
  x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list
  rust: arch/um: Add support for CONFIG_RUST under x86_64 UML
  rust: arch/um: Disable FP/SIMD instruction to match x86
  rust: arch/um: Use 'pie' relocation mode under UML
  ...

Pull jffs2, ubi and ubifs updates from Richard Weinberger:
 "JFFS2:
   - Fix memory corruption in error path
   - Spelling and coding style fixes

  UBI:
   - Switch to BLK_MQ_F_BLOCKING in ubiblock
   - Wire up partent device (for sysfs)
   - Multiple UAF bugfixes
   - Fix for an infinite loop in WL error path

  UBIFS:
   - Fix for multiple memory leaks in error paths
   - Fixes for wrong space accounting
   - Minor cleanups
   - Spelling and coding style fixes"

* tag 'ubifs-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (36 commits)
  ubi: block: Fix a possible use-after-free bug in ubiblock_create()
  ubifs: make kobj_type structures constant
  mtd: ubi: block: wire-up device parent
  mtd: ubi: wire-up parent MTD device
  ubi: use correct names in function kernel-doc comments
  ubi: block: set BLK_MQ_F_BLOCKING
  jffs2: Fix list_del corruption if compressors initialized failed
  jffs2: Use function instead of macro when initialize compressors
  jffs2: fix spelling mistake "neccecary"->"necessary"
  ubifs: Fix kernel-doc
  ubifs: Fix some kernel-doc comments
  UBI: Fastmap: Fix kernel-doc
  ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
  ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
  ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling fastmap
  ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
  ubifs: ubifs_writepage: Mark page dirty after writing inode failed
  ubifs: dirty_cow_znode: Fix memleak in error handling path
  ubifs: Re-statistic cleaned znode count if commit failed
  ubi: Fix permission display of the debugfs files
  ...

Pull 9p updates from Eric Van Hensbergen:

 - some fixes and cleanup setting up for a larger set of performance
   patches I've been working on

 - a contributed fixes relating to 9p/rdma

 - some contributed fixes relating to 9p/xen

* tag '9p-6.3-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: fix error reporting in v9fs_dir_release
  net/9p: fix bug in client create for .L
  9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
  9p/xen: fix connection sequence
  9p/xen: fix version parsing
  fs/9p: Expand setup of writeback cache to all levels
  net/9p: Adjust maximum MSIZE to account for p9 header

Pull jfs update from Dave Kleikamp:
 "Just one simple sanity check"

* tag 'jfs-6.3' of https://github.com/kleikamp/linux-shaggy:
  fs/jfs: fix shift exponent db_agl2size negative

Pull exfat updates from Namjae Jeon:

 - Handle vendor extension and allocation entries as unrecognized benign
   secondary entries

 - Fix wrong ->i_blocks on devices with non-512 byte sector

 - Add the check to avoid returning -EIO from exfat_readdir() at current
   position exceeding the directory size

 - Fix a bug that reach the end of the directory stream at a position
   not aligned with the dentry size

 - Redefine DIR_DELETED as 0xFFFFFFF7, the bad cluster number

 - Two cleanup fixes and fix cluster leakage in error handling

* tag 'exfat-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix the newly allocated clusters are not freed in error handling
  exfat: don't print error log in normal case
  exfat: remove unneeded code from exfat_alloc_cluster()
  exfat: handle unreconized benign secondary entries
  exfat: fix inode->i_blocks for non-512 byte sector size device
  exfat: redefine DIR_DELETED as the bad cluster number
  exfat: fix reporting fs error when reading dir beyond EOF
  exfat: fix unexpected EOF while reading dir

Pull moar xfs updates from Darrick Wong:
 "This contains a fix for a deadlock in the allocator. It continues the
  slow march towards being able to offline AGs, and it refactors the
  interface to the xfs allocator to be less indirection happy.

  Summary:

   - Fix a deadlock in the free space allocator due to the AG-walking
     algorithm forgetting to follow AG-order locking rules

   - Make the inode allocator prefer existing free inodes instead of
     failing to allocate new inode chunks when free space is low

   - Set minleft correctly when setting allocator parameters for bmap
     changes

   - Fix uninitialized variable access in the getfsmap code

   - Make a distinction between active and passive per-AG structure
     references. For now, active references are taken to perform some
     work in an AG on behalf of a high level operation; passive
     references are used by lower level code to finish operations
     started by other threads. Eventually this will become part of
     online shrink

   - Split out all the different allocator strategies into separate
     functions to move us away from design antipattern of filling out a
     huge structure for various differentish things and issuing a single
     function multiplexing call

   - Various cleanups in the filestreams allocator code, which we might
     very well want to deprecate instead of continuing

   - Fix a bug with the agi rotor code that was introduced earlier in
     this series"

* tag 'xfs-6.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (44 commits)
  xfs: restore old agirotor behavior
  xfs: fix uninitialized variable access
  xfs: refactor the filestreams allocator pick functions
  xfs: return a referenced perag from filestreams allocator
  xfs: pass perag to filestreams tracing
  xfs: use for_each_perag_wrap in xfs_filestream_pick_ag
  xfs: track an active perag reference in filestreams
  xfs: factor out MRU hit case in xfs_filestream_select_ag
  xfs: remove xfs_filestream_select_ag() longest extent check
  xfs: merge new filestream AG selection into xfs_filestream_select_ag()
  xfs: merge filestream AG lookup into xfs_filestream_select_ag()
  xfs: move xfs_bmap_btalloc_filestreams() to xfs_filestreams.c
  xfs: use xfs_bmap_longest_free_extent() in filestreams
  xfs: get rid of notinit from xfs_bmap_longest_free_extent
  xfs: factor out filestreams from xfs_bmap_btalloc_nullfb
  xfs: convert trim to use for_each_perag_range
  xfs: convert xfs_alloc_vextent_iterate_ags() to use perag walker
  xfs: move the minimum agno checks into xfs_alloc_vextent_check_args
  xfs: fold xfs_alloc_ag_vextent() into callers
  xfs: move allocation accounting to xfs_alloc_vextent_set_fsbno()
  ...

Pull i3c updates from Alexandre Belloni:
 "Subsystem:
   - transfer pid from boardinfo to device info

  Drivers:
   - dw-i3c-master: stop hardcoding initial speed"

* tag 'i3c/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: dw: stop hardcoding initial speed
  i3c: transfer pid from boardinfo to device info

Pull Documentation stragglers from Jonathan Corbet:
 "A handful of documentation patches that were ready before the merge
  window, but which I didn't get merged for the first round:

   - A recommendation from Thorsten (also akpm) on use of Link tags to
     point out problem reports

   - Some front-page formatting tweaks

   - Another Spanish translation

   - One typo(ish) fix"

* tag 'docs-6.3-2' of git://git.lwn.net/linux:
  docs: recommend using Link: whenever using Reported-by:
  Documentation: front page: use recommended heading adornments
  docs/sp_SP: Add process programming-language translation
  docs: locking: refer to the actual existing config names

Bus-speed could be default(12.5MHz) or defined by users in dts.
Dw-i3c-master should not hard-code the initial speed to be
I3C_BUS_TYP_I3C_SCL_RATE (12.5MHz)
And because of Synopsys's I3C controller limit (hcnt/lcnt register
length) and core-clk provided, there is a limit to bus speed, too.
For example, when core-clk is 250 MHz, the bus speed cannot be
lowered below 1MHz.

Tested: tested with an i3c sensor and captured with a logic analyzer.
Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20230216151057.293764-1-zenghuchen@google.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Clang is unable to handle the situation that a chunk of inline
assembly ends with a compat branch instruction and then compiler
generates another control transfer instruction immediately after
this compat branch. The later instruction will end up in forbidden
slot and cause exception.

Workaround by add a option to control the use of compact branch.
Currently it's selected by CC_IS_CLANG and hopefully we can change
it to a version check in future if clang manages to fix it.

Fix boot on boston board.

Link: https://github.com/llvm/llvm-project/issues/61045Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

To allow to access system controller registers from watchdog driver code
add a phandle in the watchdog 'wdt' node. This avoid using arch dependent
operations in driver code.
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Watchdog nodes must use 'watchdog' for node name. When a 'make dtbs_check'
is performed the following warning appears:

wdt@100: $nodename:0: 'wdt@100' does not match '^watchdog(@.*|-[0-9a-f])?$'

Fix this warning up properly renaming the node into 'watchdog'.
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Merge tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This rather small set of changes includes some minor fixes and
  improvements.

  The AB8500 driver gained support for reading the initial hardware
  state and the Synopsys DesignWare driver received some work to prepare
  for device tree and platform support"

* tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: dwc: Use devm_pwmchip_add()
  pwm: dwc: Move memory allocation to own function
  pwm: dwc: Change &pci->dev to dev in probe
  dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2
  pwm: iqs620a: Replace one remaining instance of regmap_update_bits()
  pwm: ab8500: Implement .get_state()
  pwm: ab8500: Fix calculation of duty and period
  pwm: lp3943: Drop unused i2c include
  dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema
  pwm: stm32-lp: fix the check on arr and cmp registers update
  pwm: Move pwm_capture() dummy to restore order
  pwm: sifive: Always let the first pwm_apply_state succeed

Pull ext4 updates from Ted Ts'o:
 "Improve performance for ext4 by allowing multiple process to perform
  direct I/O writes to preallocated blocks by using a shared inode lock
  instead of taking an exclusive lock.

  In addition, multiple bug fixes and cleanups"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix incorrect options show of original mount_opt and extend mount_opt2
  ext4: Fix possible corruption when moving a directory
  ext4: init error handle resource before init group descriptors
  ext4: fix task hung in ext4_xattr_delete_inode
  jbd2: fix data missing when reusing bh which is ready to be checkpointed
  ext4: update s_journal_inum if it changes after journal replay
  ext4: fail ext4_iget if special inode unallocated
  ext4: fix function prototype mismatch for ext4_feat_ktype
  ext4: remove unnecessary variable initialization
  ext4: fix inode tree inconsistency caused by ENOMEM
  ext4: refuse to create ea block when umounted
  ext4: optimize ea_inode block expansion
  ext4: remove dead code in updating backup sb
  ext4: dio take shared inode lock when overwriting preallocated blocks
  ext4: don't show commit interval if it is zero
  ext4: use ext4_fc_tl_mem in fast-commit replay path
  ext4: improve xattr consistency checking and error reporting

Fix warn: iterator used outside loop: 'xfer'. 'xfer' variable contain
invalid value in few conditions. Complete transfer within DATA phase
in successful case and at the end for failed transfer.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link:https://lore.kernel.org/all/202210191211.46FkzKmv-lkp@intel.com/
Fixes: 8777dd9d ("spi: tegra210-quad: Fix combined sequence")
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20230227200428.45832-1-kyarlagadda@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

In error handling 'free_cluster', before num_alloc clusters allocated,
p_chain->size will not updated and always 0, thus the newly allocated
clusters are not freed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

When allocating a new cluster, exFAT first allocates from the
next cluster of the last cluster of the file. If the last cluster
of the file is the last cluster of the volume, allocate from the
first cluster. This is a normal case, but the following error log
will be printed. It makes users confused, so this commit removes
the error log.

[1960905.181545] exFAT-fs (sdb1): hint_cluster is invalid (262130)
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

In the removed code, num_clusters is 0, nothing is done in
exfat_chain_cont_cluster(), so it is unneeded, remove it.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

Commit 226fae12 ("vc_screen: move load of struct vc_data pointer in
vcs_read() to avoid UAF") moved the call to vcs_vc() into the loop.

While doing this it also moved the unconditional assignment of

	ret = -ENXIO;

This unconditional assignment was valid outside the loop but within it
it clobbers the actual value of ret.

To avoid this only assign "ret = -ENXIO" when actually needed.

[ Also, the 'goto unlock_out" needs to be just a "break", so that it
  does the right thing when it exits on later iterations when partial
  success has happened - Linus ]
Reported-by: Storm Dragon <stormdragon2976@gmail.com>
Link: https://lore.kernel.org/lkml/Y%2FKS6vdql2pIsCiI@hotmail.com/
Fixes: 226fae12 ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/64981d94-d00c-4b31-9063-43ad0a384bde@t-8ch.de/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

access(2) remains commonly used, for example on exec:
access("/etc/ld.so.preload", R_OK)

or when running gcc: strace -c gcc empty.c

  % time     seconds  usecs/call     calls    errors syscall
  ------ ----------- ----------- --------- --------- ----------------
    0.00    0.000000           0        42        26 access

It falls down to do_faccessat without the AT_EACCESS flag, which in turn
results in allocation of new creds in order to modify fsuid/fsgid and
caps.  This is a very expensive process single-threaded and most notably
multi-threaded, with numerous structures getting refed and unrefed on
imminent new cred destruction.

Turns out for typical consumers the resulting creds would be identical
and this can be checked upfront, avoiding the hard work.

An access benchmark plugged into will-it-scale running on Cascade Lake
shows:

    test     proc     before       after
    access1     1    1310582     2908735    (+121%) # distinct files
    access1    24    4716491    63822173   (+1353%) # distinct files
    access2    24    2378041     5370335    (+125%) # same file

The above benchmarks are not integrated into will-it-scale, but can be
found in a pull request:

  https://github.com/antonblanchard/will-it-scale/pull/36/filesSigned-off-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've got a huge number of patches that improve code
  readability along with minor bug fixes, while we've mainly fixed some
  critical issues in recently-added per-block age-based extent_cache,
  atomic write support, and some folio cases.

  Enhancements:

   - add sysfs nodes to set last_age_weight and manage
     discard_io_aware_gran

   - show ipu policy in debugfs

   - reduce stack memory cost by using bitfield in struct f2fs_io_info

   - introduce trace_f2fs_replace_atomic_write_block

   - enhance iostat support and adds flush commands

  Bug fixes:

   - revert "f2fs: truncate blocks in batch in __complete_revoke_list()"

   - fix kernel crash on the atomic write abort flow

   - call clear_page_private_reference in .{release,invalid}_folio

   - support .migrate_folio for compressed inode

   - fix cgroup writeback accounting with fs-layer encryption

   - retry to update the inode page given data corruption

   - fix kernel crash due to NULL io->bio

   - fix some bugs in per-block age-based extent_cache:
       - wrong calculation of block age
       - update age extent in f2fs_do_zero_range()
       - update age extent correctly during truncation"

* tag 'f2fs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits)
  f2fs: drop unnecessary arg for f2fs_ioc_*()
  f2fs: Revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
  f2fs: synchronize atomic write aborts
  f2fs: fix wrong segment count
  f2fs: replace si->sbi w/ sbi in stat_show()
  f2fs: export ipu policy in debugfs
  f2fs: make kobj_type structures constant
  f2fs: fix to do sanity check on extent cache correctly
  f2fs: add missing description for ipu_policy node
  f2fs: fix to set ipu policy
  f2fs: fix typos in comments
  f2fs: fix kernel crash due to null io->bio
  f2fs: use iostat_lat_type directly as a parameter in the iostat_update_and_unbind_ctx()
  f2fs: add sysfs nodes to set last_age_weight
  f2fs: fix f2fs_show_options to show nogc_merge mount option
  f2fs: fix cgroup writeback accounting with fs-layer encryption
  f2fs: fix wrong calculation of block age
  f2fs: fix to update age extent in f2fs_do_zero_range()
  f2fs: fix to update age extent correctly during truncation
  f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
  ...

Restore the vcs_size() handling in vcs_read() to what
it had been in previous version.

Fixes: 226fae12 ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KUnit's 'hooks.o' file need to be built-in whenever KUnit is enabled
(even if CONFIG_KUNIT=m).  We'd previously attemtped to do this by
adding 'kunit/hooks.o' to obj-y in lib/Makefile, but this caused hooks.c
to be rebuilt even when it was unchanged.

Instead, always recurse into lib/kunit using obj-y when KUnit is
enabled, and add the hooks there.

Fixes: 7170b7ed ("kunit: Add "hooks" to call into KUnit when it's built as a module").
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-kselftest/CAHk-=wiEf7irTKwPJ0jTMOF3CS-13UXmF6Fns3wuWpOZ_wGyZQ@mail.gmail.com/Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, out of every Ralink SoC, only the dt-binding of the MT7621 SoC
uses pinctrl. Because of this, PINCTRL is not selected at all. Make
SOC_MT7621 select PINCTRL.

Remove PINCTRL_MT7621, enabling it for the MT7621 SoC will be handled under
the PINCTRL_MT7621 option.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All MIPS processors on the Ralink SoCs implement the MIPS32 Release 2
Architecture. Remove SYS_HAS_CPU_MIPS32_R1.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

In c0_compare_int_usable we clear compare interrupt by write value
just read out from counter to compare register.

However sometimes if those all instructions are graduated together
then it's possible that at the time compare register is written, the
counter haven't progressed, thus the interrupt is triggered again.

It also applies to QEMU that instructions is executed significantly
faster then counter.

Offset the value used to clear interrupt by one to prevent that happen.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

CP0_CMGCRBASE is not always available on CPS enabled system
such as early proAptiv.

For early SMP bring up where we can't safely access memeory,
we patch the entry of CPS NMI vector to inject CMGCR address
directly into register during early core bringup.

For VPE bringup as the core is already coherenct at that point
we just read the variable to obtain the address.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless and netfilter.

  The notable fixes here are the EEE fix which restores boot for many
  embedded platforms (real and QEMU); WiFi warning suppression and the
  ICE Kconfig cleanup.

  Current release - regressions:

   - phy: multiple fixes for EEE rework

   - wifi: wext: warn about usage only once

   - wifi: ath11k: allow system suspend to survive ath11k

  Current release - new code bugs:

   - mlx5: Fix memory leak in IPsec RoCE creation

   - ibmvnic: assign XPS map to correct queue index

  Previous releases - regressions:

   - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces

   - netfilter: ctnetlink: make event listener tracking global

   - nf_tables: allow to fetch set elements when table has an owner

   - mlx5:
      - fix skb leak while fifo resync and push
      - fix possible ptp queue fifo use-after-free

  Previous releases - always broken:

   - sched: fix action bind logic

   - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
     uses a mutex

   - netfilter: conntrack: fix rmmod double-free race

   - netfilter: xt_length: use skb len to match in length_mt6, avoid
     issues with BIG TCP

  Misc:

   - ice: remove unnecessary CONFIG_ICE_GNSS

   - mlx5e: remove hairpin write debugfs files

   - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"

* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
  tcp: tcp_check_req() can be called from process context
  net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
  xen-netback: remove unused variables pending_idx and index
  net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
  net: dsa: ocelot_ext: remove unnecessary phylink.h include
  net: mscc: ocelot: fix duplicate driver name error
  net: dsa: felix: fix internal MDIO controller resource length
  net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
  net/sched: act_sample: fix action bind logic
  net/sched: act_mpls: fix action bind logic
  net/sched: act_pedit: fix action bind logic
  wifi: wext: warn about usage only once
  wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
  qede: avoid uninitialized entries in coal_entry array
  nfc: fix memory leak of se_io context in nfc_genl_se_io
  ice: remove unnecessary CONFIG_ICE_GNSS
  net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
  ibmvnic: Assign XPS map to correct queue index
  docs: net: fix inaccuracies in msg_zerocopy.rst
  tools: net: add __pycache__ to gitignore
  ...